meh

Fork of mbed by mbed official

Revision:
77:869cf507173a
Child:
81:7d30d6019079
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim_ex.h	Fri Feb 14 14:36:43 2014 +0000
@@ -0,0 +1,233 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.0RC2
+  * @date    04-February-2014
+  * @brief   Header file of TIM HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** 
+  * @brief  TIM Hall sensor Configuration Structure definition  
+  */
+
+typedef struct
+{
+                                  
+  uint32_t IC1Polarity;            /*!< Specifies the active edge of the input signal.
+                                        This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+                                                                   
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+                                  
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t Commutation_Delay;  /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
+                                    This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */                              
+} TIM_HallSensor_InitTypeDef;
+
+/** 
+  * @brief  TIM Master configuration Structure definition  
+  */ 
+typedef struct {
+  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection 
+                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */ 
+  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection 
+                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/** 
+  * @brief  TIM Break and Dead time configuration Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t OffStateRunMode;	        /*!< TIM off state in run mode
+                                         This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+  uint32_t OffStateIDLEMode;	      /*!< TIM off state in IDLE mode
+                                         This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+  uint32_t LockLevel;	 	            /*!< TIM Lock level
+                                         This parameter can be a value of @ref TIM_Lock_level */                             
+  uint32_t DeadTime;	 	            /*!< TIM dead Time 
+                                         This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+  uint32_t BreakState;	 	          /*!< TIM Break State 
+                                         This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+  uint32_t BreakPolarity;	 	        /*!< TIM Break input polarity 
+                                         This parameter can be a value of @ref TIM_Break_Polarity */
+  uint32_t AutomaticOutput;	 	      /*!< TIM Automatic Output Enable state 
+                                         This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */           
+}TIM_BreakDeadTimeConfigTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants
+  * @{
+  */
+
+/** @defgroup TIMEx_Remap 
+  * @{
+  */
+
+#define TIM_TIM2_TIM8_TRGO                     (0x00000000)
+#define TIM_TIM2_ETH_PTP                       (0x00000400)
+#define TIM_TIM2_USBFS_SOF                     (0x00000800)
+#define TIM_TIM2_USBHS_SOF                     (0x00000C00)
+#define TIM_TIM5_GPIO                          (0x00000000)
+#define TIM_TIM5_LSI                           (0x00000040)
+#define TIM_TIM5_LSE                           (0x00000080)
+#define TIM_TIM5_RTC                           (0x000000C0)
+#define TIM_TIM11_GPIO                         (0x00000000)
+#define TIM_TIM11_HSE                          (0x00000002)
+
+#define IS_TIM_REMAP(TIM_REMAP)	 (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+                                  ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+                                  ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+                                  ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+                                  ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+                                  ((TIM_REMAP) == TIM_TIM5_LSI)||\
+                                  ((TIM_REMAP) == TIM_TIM5_LSE)||\
+                                  ((TIM_REMAP) == TIM_TIM5_RTC)||\
+                                  ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+                                  ((TIM_REMAP) == TIM_TIM11_HSE))
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */   
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Extnsion Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+
+/* Extension Callback *********************************************************/
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+
+/* Extension Peripheral State functions  **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/