meh
Fork of mbed by
Diff: TARGET_LPC11U24/power_api.h
- Revision:
- 65:5798e58a58b1
- Parent:
- 64:e3affc9e7238
- Child:
- 66:9c8f0e3462fb
--- a/TARGET_LPC11U24/power_api.h Mon Aug 05 12:28:09 2013 +0300 +++ b/TARGET_LPC11U24/power_api.h Mon Aug 12 13:17:46 2013 +0300 @@ -1,82 +1,82 @@ -/**************************************************************************** - * $Id:: power_api.h 6249 2011-01-25 19:23:47Z usb01267 $ - * Project: NXP LPC11Uxx software example - * - * Description: - * Power API Header File for NXP LPC11Uxx Device Series - * - **************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * NXP Semiconductors assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. NXP Semiconductors - * reserves the right to make changes in the software without - * notification. NXP Semiconductors also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. -****************************************************************************/ -#ifndef __LPC11UXX_POWER_API_H__ -#define __LPC11UXX_POWER_API_H__ - -#ifdef __cplusplus - extern "C" { -#endif - -#define PWRROMD_PRESENT - -typedef struct _PWRD { - void (*set_pll)(unsigned int cmd[], unsigned int resp[]); - void (*set_power)(unsigned int cmd[], unsigned int resp[]); -} PWRD; - -typedef struct _ROM { -#ifdef USBROMD_PRESENT - const USB * pUSBD; -#else - const unsigned p_usbd; -#endif /* USBROMD_PRESENT */ - const unsigned p_clib; - const unsigned p_cand; -#ifdef PWRROMD_PRESENT - const PWRD * pPWRD; -#else - const unsigned p_pwrd; -#endif /* PWRROMD_PRESENT */ - const unsigned p_dev1; - const unsigned p_dev2; - const unsigned p_dev3; - const unsigned p_dev4; -} ROM; - -//PLL setup related definitions -#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified -#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified -#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified -#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified - -#define PLL_CMD_SUCCESS 0 //PLL setup successfully found -#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output) -#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified -#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions -#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup - -//power setup elated definitions -#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface) -#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation) -#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance) -#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance - -#define PARAM_CMD_SUCCESS 0 //power setting successfully found -#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz) -#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid) - -#define MAX_CLOCK_KHZ_PARAM 50000 - -#ifdef __cplusplus -} -#endif - -#endif /* __LPC11UXX_POWER_API_H__ */ - +/**************************************************************************** + * $Id:: power_api.h 6249 2011-01-25 19:23:47Z usb01267 $ + * Project: NXP LPC11Uxx software example + * + * Description: + * Power API Header File for NXP LPC11Uxx Device Series + * + **************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. +****************************************************************************/ +#ifndef __LPC11UXX_POWER_API_H__ +#define __LPC11UXX_POWER_API_H__ + +#ifdef __cplusplus + extern "C" { +#endif + +#define PWRROMD_PRESENT + +typedef struct _PWRD { + void (*set_pll)(unsigned int cmd[], unsigned int resp[]); + void (*set_power)(unsigned int cmd[], unsigned int resp[]); +} PWRD; + +typedef struct _ROM { +#ifdef USBROMD_PRESENT + const USB * pUSBD; +#else + const unsigned p_usbd; +#endif /* USBROMD_PRESENT */ + const unsigned p_clib; + const unsigned p_cand; +#ifdef PWRROMD_PRESENT + const PWRD * pPWRD; +#else + const unsigned p_pwrd; +#endif /* PWRROMD_PRESENT */ + const unsigned p_dev1; + const unsigned p_dev2; + const unsigned p_dev3; + const unsigned p_dev4; +} ROM; + +//PLL setup related definitions +#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified +#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified +#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified +#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified + +#define PLL_CMD_SUCCESS 0 //PLL setup successfully found +#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output) +#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified +#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions +#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup + +//power setup elated definitions +#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface) +#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation) +#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance) +#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance + +#define PARAM_CMD_SUCCESS 0 //power setting successfully found +#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz) +#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid) + +#define MAX_CLOCK_KHZ_PARAM 50000 + +#ifdef __cplusplus +} +#endif + +#endif /* __LPC11UXX_POWER_API_H__ */ +