Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_pcd.h
- Revision:
- 92:4fc01daae5a5
- Parent:
- 84:0b3ab51c8877
- Child:
- 96:487b796308b0
--- a/TARGET_NUCLEO_L053R8/stm32l0xx_hal_pcd.h Wed Oct 29 11:02:04 2014 +0000
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_pcd.h Thu Nov 27 13:33:22 2014 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32l0xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 22-April-2014
+ * @version V1.1.0
+ * @date 18-June-2014
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
@@ -82,11 +82,6 @@
PCD_EP_BUF1
}PCD_EP_BUF_NUM;
-#define PCD_EP_TYPE_CTRL 0
-#define PCD_EP_TYPE_ISOC 1
-#define PCD_EP_TYPE_BULK 2
-#define PCD_EP_TYPE_INTR 3
-
#define PCD_ENDP0 ((uint8_t)0)
#define PCD_ENDP1 ((uint8_t)1)
#define PCD_ENDP2 ((uint8_t)2)
@@ -100,7 +95,7 @@
#define PCD_SNG_BUF 0
#define PCD_DBL_BUF 1
-#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
/**
* @brief PCD Initialization Structure definition
*/
@@ -111,13 +106,13 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
+ This parameter can be any value of @ref PCD_Speed */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS_ */
+ This parameter can be any value of @ref PCD_USB_EP0_MPS */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY_ */
+ This parameter can be any value of @ref PCD_USB_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
This parameter can be set to ENABLE or DISABLE */
@@ -145,7 +140,7 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type_ */
+ This parameter can be any value of @ref PCD_USB_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
@@ -208,7 +203,7 @@
* @}
*/
- /** @defgroup USB_Core_PHY
+ /** @defgroup PCD_USB_Core_PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2
@@ -216,7 +211,7 @@
* @}
*/
- /** @defgroup USB_EP0_MPS
+ /** @defgroup PCD_USB_EP0_MPS
* @{
*/
#define DEP0CTL_MPS_64 0
@@ -231,6 +226,18 @@
/**
* @}
*/
+
+/** @defgroup PCD_USB_EP_Type
+ * @{
+ */
+#define PCD_EP_TYPE_CTRL 0
+#define PCD_EP_TYPE_ISOC 1
+#define PCD_EP_TYPE_BULK 2
+#define PCD_EP_TYPE_INTR 3
+/**
+ * @}
+ */
+
/**
* @}
*/
@@ -242,13 +249,14 @@
* @{
*/
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
-
+#define __HAL_USB_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_EXTI_LINE_WAKEUP)
+
/* Internal macros -----------------------------------------------------------*/
/* SetENDPOINT */