meh
Fork of mbed by
Diff: TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_tim.h
- Revision:
- 92:4fc01daae5a5
- Child:
- 99:dbbf35b96557
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_tim.h Thu Nov 27 13:33:22 2014 +0000 @@ -0,0 +1,1487 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_tim.h + * @author MCD Application Team + * @version V1.1.0 + * @date 19-June-2014 + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_TIM_H +#define __STM32F4xx_HAL_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ + +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + + +/** + * @brief TIM Input Capture Configuration Structure definition + */ + +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ + +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources. + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity. + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler. + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +}TIM_ClockConfigTypeDef; + +/** + * @brief Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state. + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources. + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity. + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler. + This parameter can be a value of @ref TIM_ClearInput_Prescaler */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +}TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct { + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +}TIM_SlaveConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ +}HAL_TIM_StateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */ +}HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +typedef struct +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ +}TIM_HandleTypeDef; + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants + * @{ + */ + +/** @defgroup TIM_Input_Channel_Polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode + * @{ + */ +#define TIM_COUNTERMODE_UP ((uint32_t)0x0000) +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS + +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \ + ((MODE) == TIM_COUNTERMODE_DOWN) || \ + ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3)) +/** + * @} + */ + +/** @defgroup TIM_ClockDivision + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000) +#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0) +#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1) + +#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \ + ((DIV) == TIM_CLOCKDIVISION_DIV2) || \ + ((DIV) == TIM_CLOCKDIVISION_DIV4)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes + * @{ + */ +#define TIM_OCMODE_TIMING ((uint32_t)0x0000) +#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0) +#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1) +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1) +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M) +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) +#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2) + +#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \ + ((MODE) == TIM_OCMODE_PWM2)) + +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \ + ((MODE) == TIM_OCMODE_ACTIVE) || \ + ((MODE) == TIM_OCMODE_INACTIVE) || \ + ((MODE) == TIM_OCMODE_TOGGLE) || \ + ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((MODE) == TIM_OCMODE_FORCED_INACTIVE)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000) +#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E) + +#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \ + ((STATE) == TIM_OUTPUTSTATE_ENABLE)) +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State + * @{ + */ +#define TIM_OCFAST_DISABLE ((uint32_t)0x0000) +#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE) + +#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \ + ((STATE) == TIM_OCFAST_ENABLE)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000) +#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE) + +#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \ + ((STATE) == TIM_OUTPUTNSTATE_ENABLE)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000) +#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P) + +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \ + ((POLARITY) == TIM_OCPOLARITY_LOW)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000) +#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP) + +#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \ + ((POLARITY) == TIM_OCNPOLARITY_LOW)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State + * @{ + */ +#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1) +#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000) +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \ + ((STATE) == TIM_OCIDLESTATE_RESET)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State + * @{ + */ +#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N) +#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000) +#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \ + ((STATE) == TIM_OCNIDLESTATE_RESET)) +/** + * @} + */ + +/** @defgroup TIM_Channel + * @{ + */ +#define TIM_CHANNEL_1 ((uint32_t)0x0000) +#define TIM_CHANNEL_2 ((uint32_t)0x0004) +#define TIM_CHANNEL_3 ((uint32_t)0x0008) +#define TIM_CHANNEL_4 ((uint32_t)0x000C) +#define TIM_CHANNEL_ALL ((uint32_t)0x0018) + +#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4) || \ + ((CHANNEL) == TIM_CHANNEL_ALL)) + +#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2)) + +#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE + +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \ + ((POLARITY) == TIM_ICPOLARITY_FALLING) || \ + ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ + +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \ + ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \ + ((SELECTION) == TIM_ICSELECTION_TRC)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */ + +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode + * @{ + */ +#define TIM_OPMODE_SINGLE (TIM_CR1_OPM) +#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000) +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \ + ((MODE) == TIM_OPMODE_REPETITIVE)) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0) +#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1) +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \ + ((MODE) == TIM_ENCODERMODE_TI2) || \ + ((MODE) == TIM_ENCODERMODE_TI12)) +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition + * @{ + */ +#define TIM_IT_UPDATE (TIM_DIER_UIE) +#define TIM_IT_CC1 (TIM_DIER_CC1IE) +#define TIM_IT_CC2 (TIM_DIER_CC2IE) +#define TIM_IT_CC3 (TIM_DIER_CC3IE) +#define TIM_IT_CC4 (TIM_DIER_CC4IE) +#define TIM_IT_COM (TIM_DIER_COMIE) +#define TIM_IT_TRIGGER (TIM_DIER_TIE) +#define TIM_IT_BREAK (TIM_DIER_BIE) + +#define IS_TIM_IT(IT) ((((IT) & 0xFFFFFF00) == 0x00000000) && ((IT) != 0x00000000)) + +#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_UPDATE) || \ + ((IT) == TIM_IT_CC1) || \ + ((IT) == TIM_IT_CC2) || \ + ((IT) == TIM_IT_CC3) || \ + ((IT) == TIM_IT_CC4) || \ + ((IT) == TIM_IT_COM) || \ + ((IT) == TIM_IT_TRIGGER) || \ + ((IT) == TIM_IT_BREAK)) +/** + * @} + */ +#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS) +#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000) + +/** @defgroup TIM_DMA_sources + * @{ + */ +#define TIM_DMA_UPDATE (TIM_DIER_UDE) +#define TIM_DMA_CC1 (TIM_DIER_CC1DE) +#define TIM_DMA_CC2 (TIM_DIER_CC2DE) +#define TIM_DMA_CC3 (TIM_DIER_CC3DE) +#define TIM_DMA_CC4 (TIM_DIER_CC4DE) +#define TIM_DMA_COM (TIM_DIER_COMDE) +#define TIM_DMA_TRIGGER (TIM_DIER_TDE) +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000)) +/** + * @} + */ + +/** @defgroup TIM_Event_Source + * @{ + */ +#define TIM_EventSource_Update TIM_EGR_UG +#define TIM_EventSource_CC1 TIM_EGR_CC1G +#define TIM_EventSource_CC2 TIM_EGR_CC2G +#define TIM_EventSource_CC3 TIM_EGR_CC3G +#define TIM_EventSource_CC4 TIM_EGR_CC4G +#define TIM_EventSource_COM TIM_EGR_COMG +#define TIM_EventSource_Trigger TIM_EGR_TG +#define TIM_EventSource_Break TIM_EGR_BG +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000)) +/** + * @} + */ + +/** @defgroup TIM_Flag_definition + * @{ + */ +#define TIM_FLAG_UPDATE (TIM_SR_UIF) +#define TIM_FLAG_CC1 (TIM_SR_CC1IF) +#define TIM_FLAG_CC2 (TIM_SR_CC2IF) +#define TIM_FLAG_CC3 (TIM_SR_CC3IF) +#define TIM_FLAG_CC4 (TIM_SR_CC4IF) +#define TIM_FLAG_COM (TIM_SR_COMIF) +#define TIM_FLAG_TRIGGER (TIM_SR_TIF) +#define TIM_FLAG_BREAK (TIM_SR_BIF) +#define TIM_FLAG_CC1OF (TIM_SR_CC1OF) +#define TIM_FLAG_CC2OF (TIM_SR_CC2OF) +#define TIM_FLAG_CC3OF (TIM_SR_CC3OF) +#define TIM_FLAG_CC4OF (TIM_SR_CC4OF) + +#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \ + ((FLAG) == TIM_FLAG_CC1) || \ + ((FLAG) == TIM_FLAG_CC2) || \ + ((FLAG) == TIM_FLAG_CC3) || \ + ((FLAG) == TIM_FLAG_CC4) || \ + ((FLAG) == TIM_FLAG_COM) || \ + ((FLAG) == TIM_FLAG_TRIGGER) || \ + ((FLAG) == TIM_FLAG_BREAK) || \ + ((FLAG) == TIM_FLAG_CC1OF) || \ + ((FLAG) == TIM_FLAG_CC2OF) || \ + ((FLAG) == TIM_FLAG_CC3OF) || \ + ((FLAG) == TIM_FLAG_CC4OF)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Source + * @{ + */ +#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1) +#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0) +#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000) +#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0) +#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1) +#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) +#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2) +#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) +#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) +#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS) + +#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \ + ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \ + ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \ + ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \ + ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ + +#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \ + ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ + +#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \ + ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \ + ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \ + ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Filter + * @{ + */ +#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001) +#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000) + +#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR)) +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Filter + * @{ + */ +#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state + * @{ + */ +#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR) +#define TIM_OSSR_DISABLE ((uint32_t)0x0000) + +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \ + ((STATE) == TIM_OSSR_DISABLE)) +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state + * @{ + */ +#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI) +#define TIM_OSSI_DISABLE ((uint32_t)0x0000) + +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \ + ((STATE) == TIM_OSSI_DISABLE)) +/** + * @} + */ +/** @defgroup TIM_Lock_level + * @{ + */ +#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000) +#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0) +#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1) +#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK) + +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \ + ((LEVEL) == TIM_LOCKLEVEL_1) || \ + ((LEVEL) == TIM_LOCKLEVEL_2) || \ + ((LEVEL) == TIM_LOCKLEVEL_3)) +/** + * @} + */ +/** @defgroup TIM_Break_Input_enable_disable + * @{ + */ +#define TIM_BREAK_ENABLE (TIM_BDTR_BKE) +#define TIM_BREAK_DISABLE ((uint32_t)0x0000) + +#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \ + ((STATE) == TIM_BREAK_DISABLE)) +/** + * @} + */ +/** @defgroup TIM_Break_Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000) +#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP) + +#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \ + ((POLARITY) == TIM_BREAKPOLARITY_HIGH)) +/** + * @} + */ +/** @defgroup TIM_AOE_Bit_Set_Reset + * @{ + */ +#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE) +#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000) + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE)) +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection + * @{ + */ +#define TIM_TRGO_RESET ((uint32_t)0x0000) +#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0) +#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1) +#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) +#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2) +#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0)) +#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1)) +#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) + +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \ + ((SOURCE) == TIM_TRGO_ENABLE) || \ + ((SOURCE) == TIM_TRGO_UPDATE) || \ + ((SOURCE) == TIM_TRGO_OC1) || \ + ((SOURCE) == TIM_TRGO_OC1REF) || \ + ((SOURCE) == TIM_TRGO_OC2REF) || \ + ((SOURCE) == TIM_TRGO_OC3REF) || \ + ((SOURCE) == TIM_TRGO_OC4REF)) + + +/** + * @} + */ +/** @defgroup TIM_Slave_Mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000) +#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004) +#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005) +#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006) +#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007) + +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \ + ((MODE) == TIM_SLAVEMODE_GATED) || \ + ((MODE) == TIM_SLAVEMODE_RESET) || \ + ((MODE) == TIM_SLAVEMODE_TRIGGER) || \ + ((MODE) == TIM_SLAVEMODE_EXTERNAL1)) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode + * @{ + */ + +#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080) +#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000) +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((STATE) == TIM_MASTERSLAVEMODE_DISABLE)) +/** + * @} + */ +/** @defgroup TIM_Trigger_Selection + * @{ + */ +#define TIM_TS_ITR0 ((uint32_t)0x0000) +#define TIM_TS_ITR1 ((uint32_t)0x0010) +#define TIM_TS_ITR2 ((uint32_t)0x0020) +#define TIM_TS_ITR3 ((uint32_t)0x0030) +#define TIM_TS_TI1F_ED ((uint32_t)0x0040) +#define TIM_TS_TI1FP1 ((uint32_t)0x0050) +#define TIM_TS_TI2FP2 ((uint32_t)0x0060) +#define TIM_TS_ETRF ((uint32_t)0x0070) +#define TIM_TS_NONE ((uint32_t)0xFFFF) +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) +#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3)) +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_NONE)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ + +#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE )) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ + +#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Filter + * @{ + */ +#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + + /** @defgroup TIM_TI1_Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000) +#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S) + +#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \ + ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address + * @{ + */ +#define TIM_DMABase_CR1 (0x00000000) +#define TIM_DMABase_CR2 (0x00000001) +#define TIM_DMABase_SMCR (0x00000002) +#define TIM_DMABase_DIER (0x00000003) +#define TIM_DMABase_SR (0x00000004) +#define TIM_DMABase_EGR (0x00000005) +#define TIM_DMABase_CCMR1 (0x00000006) +#define TIM_DMABase_CCMR2 (0x00000007) +#define TIM_DMABase_CCER (0x00000008) +#define TIM_DMABase_CNT (0x00000009) +#define TIM_DMABase_PSC (0x0000000A) +#define TIM_DMABase_ARR (0x0000000B) +#define TIM_DMABase_RCR (0x0000000C) +#define TIM_DMABase_CCR1 (0x0000000D) +#define TIM_DMABase_CCR2 (0x0000000E) +#define TIM_DMABase_CCR3 (0x0000000F) +#define TIM_DMABase_CCR4 (0x00000010) +#define TIM_DMABase_BDTR (0x00000011) +#define TIM_DMABase_DCR (0x00000012) +#define TIM_DMABase_OR (0x00000013) +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ + ((BASE) == TIM_DMABase_CR2) || \ + ((BASE) == TIM_DMABase_SMCR) || \ + ((BASE) == TIM_DMABase_DIER) || \ + ((BASE) == TIM_DMABase_SR) || \ + ((BASE) == TIM_DMABase_EGR) || \ + ((BASE) == TIM_DMABase_CCMR1) || \ + ((BASE) == TIM_DMABase_CCMR2) || \ + ((BASE) == TIM_DMABase_CCER) || \ + ((BASE) == TIM_DMABase_CNT) || \ + ((BASE) == TIM_DMABase_PSC) || \ + ((BASE) == TIM_DMABase_ARR) || \ + ((BASE) == TIM_DMABase_RCR) || \ + ((BASE) == TIM_DMABase_CCR1) || \ + ((BASE) == TIM_DMABase_CCR2) || \ + ((BASE) == TIM_DMABase_CCR3) || \ + ((BASE) == TIM_DMABase_CCR4) || \ + ((BASE) == TIM_DMABase_BDTR) || \ + ((BASE) == TIM_DMABase_DCR) || \ + ((BASE) == TIM_DMABase_OR)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length + * @{ + */ +#define TIM_DMABurstLength_1Transfer (0x00000000) +#define TIM_DMABurstLength_2Transfers (0x00000100) +#define TIM_DMABurstLength_3Transfers (0x00000200) +#define TIM_DMABurstLength_4Transfers (0x00000300) +#define TIM_DMABurstLength_5Transfers (0x00000400) +#define TIM_DMABurstLength_6Transfers (0x00000500) +#define TIM_DMABurstLength_7Transfers (0x00000600) +#define TIM_DMABurstLength_8Transfers (0x00000700) +#define TIM_DMABurstLength_9Transfers (0x00000800) +#define TIM_DMABurstLength_10Transfers (0x00000900) +#define TIM_DMABurstLength_11Transfers (0x00000A00) +#define TIM_DMABurstLength_12Transfers (0x00000B00) +#define TIM_DMABurstLength_13Transfers (0x00000C00) +#define TIM_DMABurstLength_14Transfers (0x00000D00) +#define TIM_DMABurstLength_15Transfers (0x00000E00) +#define TIM_DMABurstLength_16Transfers (0x00000F00) +#define TIM_DMABurstLength_17Transfers (0x00001000) +#define TIM_DMABurstLength_18Transfers (0x00001100) +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ + ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_18Transfers)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Filer_Value + * @{ + */ +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup DMA_Handle_index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State + * @{ + */ +#define TIM_CCx_ENABLE ((uint32_t)0x0001) +#define TIM_CCx_DISABLE ((uint32_t)0x0000) +#define TIM_CCxN_ENABLE ((uint32_t)0x0004) +#define TIM_CCxN_DISABLE ((uint32_t)0x0000) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @brief Reset TIM handle state + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET) + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + + +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \ + { \ + if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/* The Main Output of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__: TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \ + { \ + if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) +#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \ +(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8))) + +#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \ +(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC)) + +/** + * @brief Sets the TIM Capture Compare Register value on runtime without + * calling another time ConfigChannel function. + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__: specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \ +(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__)) + +/** + * @brief Gets the TIM Capture Compare Register value on runtime + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval None + */ +#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \ + (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2))) + +/** + * @brief Sets the TIM Counter Register value on runtime. + * @param __HANDLE__: TIM handle. + * @param __COUNTER__: specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Gets the TIM Counter Register value on runtime. + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_GetCounter(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Sets the TIM Autoreload Register value on runtime without calling + * another time any Init function. + * @param __HANDLE__: TIM handle. + * @param __AUTORELOAD__: specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) +/** + * @brief Gets the TIM Autoreload Register value on runtime + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_GetAutoreload(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Sets the TIM Clock Division value on runtime without calling + * another time any Init function. + * @param __HANDLE__: TIM handle. + * @param __CKD__: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1 + * @arg TIM_CLOCKDIVISION_DIV2 + * @arg TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) +/** + * @brief Gets the TIM Clock Division value on runtime + * @param __HANDLE__: TIM handle. + * @retval None + */ +#define __HAL_TIM_GetClockDivision(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Sets the TIM Input Capture prescaler on runtime without calling + * another time HAL_TIM_IC_ConfigChannel() function. + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \ + __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Gets the TIM Input Capture prescaler on runtime + * @param __HANDLE__: TIM handle. + * @param __CHANNEL__ : TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval None + */ +#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8) +/** + * @} + */ + +/* Include TIM HAL Extension module */ +#include "stm32f4xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); + +/* Timer Output Compare functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Timer PWM functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Timer Input Capture functions ***********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Timer One Pulse functions ***************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Timer Encoder functions *****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Interrupt Handler functions **********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); + +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ + uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ + uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Peripheral State functions **************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); + +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); +void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma); +void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState); + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_TIM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/