Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim_ex.h
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim_ex.h Wed Sep 16 15:32:31 2015 +0100
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim_ex.h Fri Oct 02 07:35:07 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f0xx_hal_tim_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
+ * @version V1.3.0
+ * @date 26-June-2015
* @brief Header file of TIM HAL Extended module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -33,7 +33,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
- */
+ */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_TIM_EX_H
@@ -52,44 +52,45 @@
/** @addtogroup TIMEx
* @{
- */
+ */
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup TIMEx_Exported_Types TIMEx Extended Exported Types
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIMEx Exported Types
* @{
*/
-/**
- * @brief TIM Hall sensor Configuration Structure definition
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
-
+
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
+
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
+
uint32_t IC1Filter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
- uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef;
-/**
- * @brief TIM Master configuration Structure definition
+/**
+ * @brief TIM Master configuration Structure definition
*/
typedef struct {
uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
- This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
uint32_t MasterSlaveMode; /*!< Master/slave mode selection
This parameter can be a value of @ref TIM_Master_Slave_Mode */
}TIM_MasterConfigTypeDef;
-/**
- * @brief TIM Break and Dead time configuration Structure definition
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
*/
typedef struct
{
@@ -98,7 +99,7 @@
uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
uint32_t LockLevel; /*!< TIM Lock level
- This parameter can be a value of @ref TIM_Lock_level */
+ This parameter can be a value of @ref TIM_Lock_level */
uint32_t DeadTime; /*!< TIM dead Time
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint32_t BreakState; /*!< TIM Break State
@@ -106,18 +107,18 @@
uint32_t BreakPolarity; /*!< TIM Break input polarity
This parameter can be a value of @ref TIM_Break_Polarity */
uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
- This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
} TIM_BreakDeadTimeConfigTypeDef;
/**
* @}
- */
+ */
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
* @{
*/
-
+
/** @defgroup TIMEx_Remap TIMEx Remap
* @{
*/
@@ -135,10 +136,10 @@
* @}
*/
-/** @defgroup TIM_Clock_Filter TIM Clock Filter
+/** @defgroup TIMEx_Clock_Filter TIMEx Clock Filter
* @{
*/
-#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF)
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF) /*!< BreakDead Time */
/**
* @}
*/
@@ -154,8 +155,7 @@
* @{
*/
-/** @addtogroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
- * @brief Timer Hall Sensor functions
+/** @addtogroup TIMEx_Exported_Functions_Group1
* @{
*/
/* Timer Hall Sensor functions **********************************************/
@@ -178,8 +178,7 @@
* @}
*/
-/** @addtogroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
- * @brief Timer Complementary Output Compare functions
+/** @addtogroup TIMEx_Exported_Functions_Group2
* @{
*/
/* Timer Complementary Output Compare functions *****************************/
@@ -198,8 +197,7 @@
* @}
*/
-/** @addtogroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
- * @brief Timer Complementary PWM functions
+/** @addtogroup TIMEx_Exported_Functions_Group3
* @{
*/
/* Timer Complementary PWM functions ****************************************/
@@ -217,8 +215,7 @@
* @}
*/
-/** @addtogroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
- * @brief Timer Complementary One Pulse functions
+/** @addtogroup TIMEx_Exported_Functions_Group4
* @{
*/
/* Timer Complementary One Pulse functions **********************************/
@@ -233,8 +230,7 @@
* @}
*/
-/** @addtogroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
- * @brief Peripheral Control functions
+/** @addtogroup TIMEx_Exported_Functions_Group5
* @{
*/
/* Extended Control functions ************************************************/
@@ -248,20 +244,17 @@
* @}
*/
-/** @addtogroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
- * @brief Extended Callbacks functions
+/** @addtogroup TIMEx_Exported_Functions_Group6
* @{
*/
/* Extension Callback *********************************************************/
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
-void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
-/** @addtogroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
- * @brief Extended Peripheral State functions
+/** @addtogroup TIMEx_Exported_Functions_Group7
* @{
*/
/* Extension Peripheral State functions **************************************/
@@ -272,16 +265,27 @@
/**
* @}
- */
+ */
+/* End of exported functions -------------------------------------------------*/
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+* @{
+*/
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
/**
- * @}
- */
+* @}
+*/
+/* End of private functions --------------------------------------------------*/
/**
* @}
*/
-
+
+/**
+ * @}
+ */
+
#ifdef __cplusplus
}
#endif
@@ -290,4 +294,3 @@
#endif /* __STM32F0xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-