meh
Fork of mbed by
Diff: LPC11U24/power_api.h
- Revision:
- 44:24d45a770a51
- Parent:
- 40:976df7c37ad5
- Child:
- 46:890817bdcffb
--- a/LPC11U24/power_api.h Fri Oct 26 17:40:46 2012 +0100 +++ b/LPC11U24/power_api.h Wed Nov 21 10:49:56 2012 +0000 @@ -26,12 +26,12 @@ #define PWRROMD_PRESENT -typedef struct _PWRD { +typedef struct _PWRD { void (*set_pll)(unsigned int cmd[], unsigned int resp[]); void (*set_power)(unsigned int cmd[], unsigned int resp[]); } PWRD; -typedef struct _ROM { +typedef struct _ROM { #ifdef USBROMD_PRESENT const USB * pUSBD; #else @@ -51,26 +51,26 @@ } ROM; //PLL setup related definitions -#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified -#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified -#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified -#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified +#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified +#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified +#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified +#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified -#define PLL_CMD_SUCCESS 0 //PLL setup successfully found -#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output) -#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified -#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions -#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup +#define PLL_CMD_SUCCESS 0 //PLL setup successfully found +#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output) +#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified +#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions +#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup //power setup elated definitions -#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface) -#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation) -#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance) -#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance +#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface) +#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation) +#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance) +#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance -#define PARAM_CMD_SUCCESS 0 //power setting successfully found -#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz) -#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid) +#define PARAM_CMD_SUCCESS 0 //power setting successfully found +#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz) +#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid) #define MAX_CLOCK_KHZ_PARAM 50000