Diff: TARGET_NUCLEO_F103RB/PinNames.h

Revision:

73:1efda918f0ba

Child:

74:a842253909c9

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F103RB/PinNames.h	Mon Dec 09 18:43:03 2013 +0200
@@ -0,0 +1,178 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// MODE (see GPIOMode_TypeDef structure)
+// AFNUM (see AF_mapping constant table)
+#define STM_PIN_DATA(MODE, AFNUM)  (((MODE) << 8) | (AFNUM))
+#define STM_PIN_MODE(X)            ((X) >> 8)
+#define STM_PIN_AFNUM(X)           ((X) & 0xFF)
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+  
+  // high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F)
+  // low nibble  = pin number
+  PA_0  = 0x00,
+  PA_1  = 0x01,
+  PA_2  = 0x02,
+  PA_3  = 0x03,
+  PA_4  = 0x04,
+  PA_5  = 0x05,
+  PA_6  = 0x06,
+  PA_7  = 0x07,
+  PA_8  = 0x08,
+  PA_9  = 0x09,
+  PA_10 = 0x0A,
+  PA_11 = 0x0B,
+  PA_12 = 0x0C,
+  PA_13 = 0x0D,
+  PA_14 = 0x0E,
+  PA_15 = 0x0F,
+
+  PB_0  = 0x10,
+  PB_1  = 0x11,
+  PB_2  = 0x12,
+  PB_3  = 0x13,
+  PB_4  = 0x14,
+  PB_5  = 0x15,
+  PB_6  = 0x16,
+  PB_7  = 0x17,
+  PB_8  = 0x18,
+  PB_9  = 0x19,
+  PB_10 = 0x1A,
+  PB_11 = 0x1B,
+  PB_12 = 0x1C,
+  PB_13 = 0x1D,
+  PB_14 = 0x1E,
+  PB_15 = 0x1F,
+
+  PC_0  = 0x20,
+  PC_1  = 0x21,
+  PC_2  = 0x22,
+  PC_3  = 0x23,
+  PC_4  = 0x24,
+  PC_5  = 0x25,
+  PC_6  = 0x26,
+  PC_7  = 0x27,
+  PC_8  = 0x28,
+  PC_9  = 0x29,
+  PC_10 = 0x2A,
+  PC_11 = 0x2B,
+  PC_12 = 0x2C,
+  PC_13 = 0x2D,
+  PC_14 = 0x2E,
+  PC_15 = 0x2F,
+
+  PD_0  = 0x30,
+  PD_1  = 0x31,
+  PD_2  = 0x32,
+  PD_3  = 0x33,
+  PD_4  = 0x34,
+  PD_5  = 0x35,
+  PD_6  = 0x36,
+  PD_7  = 0x37,
+  PD_8  = 0x38,
+  PD_9  = 0x39,
+  PD_10 = 0x3A,
+  PD_11 = 0x3B,
+  PD_12 = 0x3C,
+  PD_13 = 0x3D,
+  PD_14 = 0x3E,
+  PD_15 = 0x3F,
+
+  PE_0  = 0x40,
+  PE_1  = 0x41,
+  PE_2  = 0x42,
+  PE_3  = 0x43,
+  PE_4  = 0x44,
+  PE_5  = 0x45,
+  PE_6  = 0x46,
+  PE_7  = 0x47,
+  PE_8  = 0x48,
+  PE_9  = 0x49,
+  PE_10 = 0x4A,
+  PE_11 = 0x4B,
+  PE_12 = 0x4C,
+  PE_13 = 0x4D,
+  PE_14 = 0x4E,
+  PE_15 = 0x4F,
+
+  //--------------------
+  // NUCLEO_F103RB board
+  //--------------------
+
+  // Arduino connectors
+  A0          = PA_0,
+  A1          = PA_1,
+  A2          = PA_4,
+  A3          = PB_0,
+  A4          = PC_1,
+  A5          = PC_0,
+  D0          = PA_3,
+  D1          = PA_2,
+  D2          = PA_10,
+  D3          = PB_3,
+  D4          = PB_5,
+  D5          = PB_4,
+  D6          = PB_10,
+  D7          = PA_8,
+  D8          = PA_9,
+  D9          = PC_7,
+  D10         = PB_6,
+  D11         = PA_7,
+  D12         = PA_6,
+  D13         = PA_5,
+  D14         = PB_9,
+  D15         = PB_8,
+
+  USER_BUTTON = PC_13,
+  UART_TX     = PA_2,
+  UART_RX     = PA_3,
+
+  // mbed mandatory namings
+  LED1 = PA_5,
+  LED2 = PA_5,
+  LED3 = PA_5,  
+  LED4 = PA_5,
+  
+  // Not connected
+  NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone  = 0,
+    PullUp    = 1,
+    PullDown  = 2,
+    OpenDrain = 3
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif