meh
Fork of mbed by
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.h
- Revision:
- 85:024bf7f99721
- Parent:
- 81:7d30d6019079
- Child:
- 90:cb3d968589d8
--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.h Mon May 19 18:14:09 2014 +0100 +++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.h Wed Jun 11 15:14:05 2014 +0100 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f4xx_hal_smartcard.h * @author MCD Application Team - * @version V1.0.0 - * @date 18-February-2014 + * @version V1.1.0RC2 + * @date 14-May-2014 * @brief Header file of SMARTCARD HAL module. ****************************************************************************** * @attention @@ -91,13 +91,13 @@ data bit (MSB) has to be output on the SCLK pin in synchronous mode. This parameter can be a value of @ref SMARTCARD_Last_Bit */ - uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler + uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler. This parameter must be a number between Min_Data = 0 and Max_Data = 255 */ - uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time + uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time. This parameter must be a number between Min_Data = 0 and Max_Data = 255 */ - uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state + uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state. This parameter can be a value of @ref SmartCard_NACK_State */ }SMARTCARD_InitTypeDef; @@ -106,13 +106,14 @@ */ typedef enum { - HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */ + HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ + HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ + HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */ }HAL_SMARTCARD_StateTypeDef; /** @@ -313,6 +314,12 @@ /* Exported macro ------------------------------------------------------------*/ +/** @brief Reset SMARTCARD handle state + * @param __HANDLE__: specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET) + /** @brief Flushs the Smartcard DR register * @param __HANDLE__: specifies the SMARTCARD Handle. */