Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F401RE/stm32f4xx_hal_irda.h@99:dbbf35b96557, 2015-05-13 (annotated)
- Committer:
- Kojto
- Date:
- Wed May 13 08:08:21 2015 +0200
- Revision:
- 99:dbbf35b96557
- Parent:
- 90:cb3d968589d8
- Child:
- 106:ba1f97679dad
Release 99 of the mbed library
Changes:
- new targets - MAXWSNENV, DISCO_L053C8
- STM32F4xx - ST Cube driver
- KSDK mcu - SPI timing fix
- Nordic - update to softdevice s130
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| emilmont | 77:869cf507173a | 1 | /** |
| emilmont | 77:869cf507173a | 2 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 3 | * @file stm32f4xx_hal_irda.h |
| emilmont | 77:869cf507173a | 4 | * @author MCD Application Team |
| Kojto | 99:dbbf35b96557 | 5 | * @version V1.3.0 |
| Kojto | 99:dbbf35b96557 | 6 | * @date 09-March-2015 |
| emilmont | 77:869cf507173a | 7 | * @brief Header file of IRDA HAL module. |
| emilmont | 77:869cf507173a | 8 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 9 | * @attention |
| emilmont | 77:869cf507173a | 10 | * |
| Kojto | 99:dbbf35b96557 | 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
| emilmont | 77:869cf507173a | 12 | * |
| emilmont | 77:869cf507173a | 13 | * Redistribution and use in source and binary forms, with or without modification, |
| emilmont | 77:869cf507173a | 14 | * are permitted provided that the following conditions are met: |
| emilmont | 77:869cf507173a | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
| emilmont | 77:869cf507173a | 16 | * this list of conditions and the following disclaimer. |
| emilmont | 77:869cf507173a | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| emilmont | 77:869cf507173a | 18 | * this list of conditions and the following disclaimer in the documentation |
| emilmont | 77:869cf507173a | 19 | * and/or other materials provided with the distribution. |
| emilmont | 77:869cf507173a | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| emilmont | 77:869cf507173a | 21 | * may be used to endorse or promote products derived from this software |
| emilmont | 77:869cf507173a | 22 | * without specific prior written permission. |
| emilmont | 77:869cf507173a | 23 | * |
| emilmont | 77:869cf507173a | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| emilmont | 77:869cf507173a | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| emilmont | 77:869cf507173a | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| emilmont | 77:869cf507173a | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| emilmont | 77:869cf507173a | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| emilmont | 77:869cf507173a | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| emilmont | 77:869cf507173a | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| emilmont | 77:869cf507173a | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| emilmont | 77:869cf507173a | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| emilmont | 77:869cf507173a | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| emilmont | 77:869cf507173a | 34 | * |
| emilmont | 77:869cf507173a | 35 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 36 | */ |
| emilmont | 77:869cf507173a | 37 | |
| emilmont | 77:869cf507173a | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| emilmont | 77:869cf507173a | 39 | #ifndef __STM32F4xx_HAL_IRDA_H |
| emilmont | 77:869cf507173a | 40 | #define __STM32F4xx_HAL_IRDA_H |
| emilmont | 77:869cf507173a | 41 | |
| emilmont | 77:869cf507173a | 42 | #ifdef __cplusplus |
| emilmont | 77:869cf507173a | 43 | extern "C" { |
| emilmont | 77:869cf507173a | 44 | #endif |
| emilmont | 77:869cf507173a | 45 | |
| emilmont | 77:869cf507173a | 46 | /* Includes ------------------------------------------------------------------*/ |
| emilmont | 77:869cf507173a | 47 | #include "stm32f4xx_hal_def.h" |
| emilmont | 77:869cf507173a | 48 | |
| emilmont | 77:869cf507173a | 49 | /** @addtogroup STM32F4xx_HAL_Driver |
| emilmont | 77:869cf507173a | 50 | * @{ |
| emilmont | 77:869cf507173a | 51 | */ |
| emilmont | 77:869cf507173a | 52 | |
| emilmont | 77:869cf507173a | 53 | /** @addtogroup IRDA |
| emilmont | 77:869cf507173a | 54 | * @{ |
| emilmont | 77:869cf507173a | 55 | */ |
| emilmont | 77:869cf507173a | 56 | |
| emilmont | 77:869cf507173a | 57 | /* Exported types ------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 58 | /** @defgroup IRDA_Exported_Types IRDA Exported Types |
| Kojto | 99:dbbf35b96557 | 59 | * @{ |
| Kojto | 99:dbbf35b96557 | 60 | */ |
| emilmont | 77:869cf507173a | 61 | /** |
| emilmont | 77:869cf507173a | 62 | * @brief IRDA Init Structure definition |
| emilmont | 77:869cf507173a | 63 | */ |
| emilmont | 77:869cf507173a | 64 | typedef struct |
| emilmont | 77:869cf507173a | 65 | { |
| emilmont | 77:869cf507173a | 66 | uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. |
| emilmont | 77:869cf507173a | 67 | The baud rate is computed using the following formula: |
| emilmont | 77:869cf507173a | 68 | - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate))) |
| emilmont | 77:869cf507173a | 69 | - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ |
| emilmont | 77:869cf507173a | 70 | |
| emilmont | 77:869cf507173a | 71 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
| emilmont | 77:869cf507173a | 72 | This parameter can be a value of @ref IRDA_Word_Length */ |
| emilmont | 77:869cf507173a | 73 | |
| emilmont | 77:869cf507173a | 74 | |
| emilmont | 77:869cf507173a | 75 | uint32_t Parity; /*!< Specifies the parity mode. |
| emilmont | 77:869cf507173a | 76 | This parameter can be a value of @ref IRDA_Parity |
| emilmont | 77:869cf507173a | 77 | @note When parity is enabled, the computed parity is inserted |
| emilmont | 77:869cf507173a | 78 | at the MSB position of the transmitted data (9th bit when |
| emilmont | 77:869cf507173a | 79 | the word length is set to 9 data bits; 8th bit when the |
| emilmont | 77:869cf507173a | 80 | word length is set to 8 data bits). */ |
| emilmont | 77:869cf507173a | 81 | |
| emilmont | 77:869cf507173a | 82 | uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. |
| emilmont | 77:869cf507173a | 83 | This parameter can be a value of @ref IRDA_Mode */ |
| emilmont | 77:869cf507173a | 84 | |
| emilmont | 77:869cf507173a | 85 | uint8_t Prescaler; /*!< Specifies the Prescaler */ |
| emilmont | 77:869cf507173a | 86 | |
| emilmont | 77:869cf507173a | 87 | uint32_t IrDAMode; /*!< Specifies the IrDA mode |
| Kojto | 99:dbbf35b96557 | 88 | This parameter can be a value of @ref IRDA_Low_Power */ |
| emilmont | 77:869cf507173a | 89 | }IRDA_InitTypeDef; |
| emilmont | 77:869cf507173a | 90 | |
| emilmont | 77:869cf507173a | 91 | /** |
| emilmont | 77:869cf507173a | 92 | * @brief HAL State structures definition |
| emilmont | 77:869cf507173a | 93 | */ |
| emilmont | 77:869cf507173a | 94 | typedef enum |
| emilmont | 77:869cf507173a | 95 | { |
| emilmont | 77:869cf507173a | 96 | HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ |
| emilmont | 77:869cf507173a | 97 | HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| Kojto | 99:dbbf35b96557 | 98 | HAL_IRDA_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ |
| emilmont | 77:869cf507173a | 99 | HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| emilmont | 77:869cf507173a | 100 | HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| emilmont | 77:869cf507173a | 101 | HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
| emilmont | 77:869cf507173a | 102 | HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| emilmont | 77:869cf507173a | 103 | HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */ |
| emilmont | 77:869cf507173a | 104 | }HAL_IRDA_StateTypeDef; |
| emilmont | 77:869cf507173a | 105 | |
| emilmont | 77:869cf507173a | 106 | /** |
| Kojto | 99:dbbf35b96557 | 107 | * @brief IRDA handle Structure definition |
| emilmont | 77:869cf507173a | 108 | */ |
| emilmont | 77:869cf507173a | 109 | typedef struct |
| emilmont | 77:869cf507173a | 110 | { |
| emilmont | 77:869cf507173a | 111 | USART_TypeDef *Instance; /* USART registers base address */ |
| emilmont | 77:869cf507173a | 112 | |
| emilmont | 77:869cf507173a | 113 | IRDA_InitTypeDef Init; /* IRDA communication parameters */ |
| emilmont | 77:869cf507173a | 114 | |
| emilmont | 77:869cf507173a | 115 | uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */ |
| emilmont | 77:869cf507173a | 116 | |
| emilmont | 77:869cf507173a | 117 | uint16_t TxXferSize; /* IRDA Tx Transfer size */ |
| emilmont | 77:869cf507173a | 118 | |
| emilmont | 77:869cf507173a | 119 | uint16_t TxXferCount; /* IRDA Tx Transfer Counter */ |
| emilmont | 77:869cf507173a | 120 | |
| emilmont | 77:869cf507173a | 121 | uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */ |
| emilmont | 77:869cf507173a | 122 | |
| emilmont | 77:869cf507173a | 123 | uint16_t RxXferSize; /* IRDA Rx Transfer size */ |
| emilmont | 77:869cf507173a | 124 | |
| emilmont | 77:869cf507173a | 125 | uint16_t RxXferCount; /* IRDA Rx Transfer Counter */ |
| emilmont | 77:869cf507173a | 126 | |
| emilmont | 77:869cf507173a | 127 | DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */ |
| emilmont | 77:869cf507173a | 128 | |
| emilmont | 77:869cf507173a | 129 | DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */ |
| emilmont | 77:869cf507173a | 130 | |
| Kojto | 99:dbbf35b96557 | 131 | HAL_LockTypeDef Lock; /* Locking object */ |
| emilmont | 77:869cf507173a | 132 | |
| Kojto | 99:dbbf35b96557 | 133 | __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */ |
| emilmont | 77:869cf507173a | 134 | |
| Kojto | 99:dbbf35b96557 | 135 | __IO uint32_t ErrorCode; /* IRDA Error code */ |
| Kojto | 99:dbbf35b96557 | 136 | |
| emilmont | 77:869cf507173a | 137 | }IRDA_HandleTypeDef; |
| Kojto | 99:dbbf35b96557 | 138 | /** |
| Kojto | 99:dbbf35b96557 | 139 | * @} |
| Kojto | 99:dbbf35b96557 | 140 | */ |
| emilmont | 77:869cf507173a | 141 | |
| emilmont | 77:869cf507173a | 142 | /* Exported constants --------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 143 | /** @defgroup IRDA_Exported_Constants IRDA Exported constants |
| emilmont | 77:869cf507173a | 144 | * @{ |
| emilmont | 77:869cf507173a | 145 | */ |
| Kojto | 99:dbbf35b96557 | 146 | /** @defgroup IRDA_Error_Code IRDA Error Code |
| Kojto | 99:dbbf35b96557 | 147 | * @brief IRDA Error Code |
| Kojto | 99:dbbf35b96557 | 148 | * @{ |
| Kojto | 99:dbbf35b96557 | 149 | */ |
| Kojto | 99:dbbf35b96557 | 150 | #define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ |
| Kojto | 99:dbbf35b96557 | 151 | #define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ |
| Kojto | 99:dbbf35b96557 | 152 | #define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ |
| Kojto | 99:dbbf35b96557 | 153 | #define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */ |
| Kojto | 99:dbbf35b96557 | 154 | #define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ |
| Kojto | 99:dbbf35b96557 | 155 | #define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ |
| Kojto | 99:dbbf35b96557 | 156 | /** |
| Kojto | 99:dbbf35b96557 | 157 | * @} |
| Kojto | 99:dbbf35b96557 | 158 | */ |
| emilmont | 77:869cf507173a | 159 | |
| Kojto | 99:dbbf35b96557 | 160 | /** @defgroup IRDA_Word_Length IRDA Word Length |
| emilmont | 77:869cf507173a | 161 | * @{ |
| emilmont | 77:869cf507173a | 162 | */ |
| emilmont | 77:869cf507173a | 163 | #define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 164 | #define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
| emilmont | 77:869cf507173a | 165 | /** |
| emilmont | 77:869cf507173a | 166 | * @} |
| emilmont | 77:869cf507173a | 167 | */ |
| emilmont | 77:869cf507173a | 168 | |
| Kojto | 99:dbbf35b96557 | 169 | /** @defgroup IRDA_Parity IRDA Parity |
| emilmont | 77:869cf507173a | 170 | * @{ |
| emilmont | 77:869cf507173a | 171 | */ |
| emilmont | 77:869cf507173a | 172 | #define IRDA_PARITY_NONE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 173 | #define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| emilmont | 77:869cf507173a | 174 | #define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| emilmont | 77:869cf507173a | 175 | /** |
| emilmont | 77:869cf507173a | 176 | * @} |
| emilmont | 77:869cf507173a | 177 | */ |
| emilmont | 77:869cf507173a | 178 | |
| Kojto | 99:dbbf35b96557 | 179 | /** @defgroup IRDA_Mode IRDA Transfer Mode |
| emilmont | 77:869cf507173a | 180 | * @{ |
| emilmont | 77:869cf507173a | 181 | */ |
| emilmont | 77:869cf507173a | 182 | #define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) |
| emilmont | 77:869cf507173a | 183 | #define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) |
| emilmont | 77:869cf507173a | 184 | #define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| emilmont | 77:869cf507173a | 185 | /** |
| emilmont | 77:869cf507173a | 186 | * @} |
| emilmont | 77:869cf507173a | 187 | */ |
| emilmont | 77:869cf507173a | 188 | |
| Kojto | 99:dbbf35b96557 | 189 | /** @defgroup IRDA_Low_Power IRDA Low Power |
| emilmont | 77:869cf507173a | 190 | * @{ |
| emilmont | 77:869cf507173a | 191 | */ |
| emilmont | 77:869cf507173a | 192 | #define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) |
| emilmont | 77:869cf507173a | 193 | #define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 194 | /** |
| emilmont | 77:869cf507173a | 195 | * @} |
| emilmont | 77:869cf507173a | 196 | */ |
| emilmont | 77:869cf507173a | 197 | |
| Kojto | 99:dbbf35b96557 | 198 | /** @defgroup IRDA_Flags IRDA Flags |
| emilmont | 77:869cf507173a | 199 | * Elements values convention: 0xXXXX |
| emilmont | 77:869cf507173a | 200 | * - 0xXXXX : Flag mask in the SR register |
| emilmont | 77:869cf507173a | 201 | * @{ |
| emilmont | 77:869cf507173a | 202 | */ |
| emilmont | 77:869cf507173a | 203 | #define IRDA_FLAG_TXE ((uint32_t)0x00000080) |
| emilmont | 77:869cf507173a | 204 | #define IRDA_FLAG_TC ((uint32_t)0x00000040) |
| emilmont | 77:869cf507173a | 205 | #define IRDA_FLAG_RXNE ((uint32_t)0x00000020) |
| emilmont | 77:869cf507173a | 206 | #define IRDA_FLAG_IDLE ((uint32_t)0x00000010) |
| emilmont | 77:869cf507173a | 207 | #define IRDA_FLAG_ORE ((uint32_t)0x00000008) |
| emilmont | 77:869cf507173a | 208 | #define IRDA_FLAG_NE ((uint32_t)0x00000004) |
| emilmont | 77:869cf507173a | 209 | #define IRDA_FLAG_FE ((uint32_t)0x00000002) |
| emilmont | 77:869cf507173a | 210 | #define IRDA_FLAG_PE ((uint32_t)0x00000001) |
| emilmont | 77:869cf507173a | 211 | /** |
| emilmont | 77:869cf507173a | 212 | * @} |
| emilmont | 77:869cf507173a | 213 | */ |
| emilmont | 77:869cf507173a | 214 | |
| Kojto | 99:dbbf35b96557 | 215 | /** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions |
| emilmont | 77:869cf507173a | 216 | * Elements values convention: 0xY000XXXX |
| emilmont | 77:869cf507173a | 217 | * - XXXX : Interrupt mask in the XX register |
| emilmont | 77:869cf507173a | 218 | * - Y : Interrupt source register (2bits) |
| emilmont | 77:869cf507173a | 219 | * - 01: CR1 register |
| emilmont | 77:869cf507173a | 220 | * - 10: CR2 register |
| emilmont | 77:869cf507173a | 221 | * - 11: CR3 register |
| emilmont | 77:869cf507173a | 222 | * @{ |
| emilmont | 77:869cf507173a | 223 | */ |
| Kojto | 99:dbbf35b96557 | 224 | #define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) |
| Kojto | 99:dbbf35b96557 | 225 | #define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) |
| Kojto | 99:dbbf35b96557 | 226 | #define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) |
| Kojto | 99:dbbf35b96557 | 227 | #define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) |
| Kojto | 99:dbbf35b96557 | 228 | #define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) |
| bogdanm | 85:024bf7f99721 | 229 | |
| Kojto | 99:dbbf35b96557 | 230 | #define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) |
| emilmont | 77:869cf507173a | 231 | |
| Kojto | 99:dbbf35b96557 | 232 | #define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) |
| Kojto | 99:dbbf35b96557 | 233 | #define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_EIE)) |
| emilmont | 77:869cf507173a | 234 | /** |
| emilmont | 77:869cf507173a | 235 | * @} |
| emilmont | 77:869cf507173a | 236 | */ |
| bogdanm | 85:024bf7f99721 | 237 | |
| emilmont | 77:869cf507173a | 238 | /** |
| emilmont | 77:869cf507173a | 239 | * @} |
| emilmont | 77:869cf507173a | 240 | */ |
| emilmont | 77:869cf507173a | 241 | |
| emilmont | 77:869cf507173a | 242 | /* Exported macro ------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 243 | /** @defgroup IRDA_Exported_Macros IRDA Exported Macros |
| Kojto | 99:dbbf35b96557 | 244 | * @{ |
| Kojto | 99:dbbf35b96557 | 245 | */ |
| emilmont | 77:869cf507173a | 246 | |
| bogdanm | 85:024bf7f99721 | 247 | /** @brief Reset IRDA handle state |
| Kojto | 90:cb3d968589d8 | 248 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 249 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 250 | * UART peripheral. |
| bogdanm | 85:024bf7f99721 | 251 | * @retval None |
| bogdanm | 85:024bf7f99721 | 252 | */ |
| bogdanm | 85:024bf7f99721 | 253 | #define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET) |
| bogdanm | 85:024bf7f99721 | 254 | |
| bogdanm | 85:024bf7f99721 | 255 | /** @brief Flushs the IRDA DR register |
| Kojto | 90:cb3d968589d8 | 256 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 257 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 258 | * UART peripheral. |
| bogdanm | 85:024bf7f99721 | 259 | */ |
| bogdanm | 85:024bf7f99721 | 260 | #define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
| bogdanm | 85:024bf7f99721 | 261 | |
| emilmont | 77:869cf507173a | 262 | /** @brief Checks whether the specified IRDA flag is set or not. |
| emilmont | 77:869cf507173a | 263 | * @param __HANDLE__: specifies the USART Handle. |
| emilmont | 77:869cf507173a | 264 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 265 | * UART peripheral. |
| emilmont | 77:869cf507173a | 266 | * @param __FLAG__: specifies the flag to check. |
| emilmont | 77:869cf507173a | 267 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 268 | * @arg IRDA_FLAG_TXE: Transmit data register empty flag |
| emilmont | 77:869cf507173a | 269 | * @arg IRDA_FLAG_TC: Transmission Complete flag |
| emilmont | 77:869cf507173a | 270 | * @arg IRDA_FLAG_RXNE: Receive data register not empty flag |
| emilmont | 77:869cf507173a | 271 | * @arg IRDA_FLAG_IDLE: Idle Line detection flag |
| emilmont | 77:869cf507173a | 272 | * @arg IRDA_FLAG_ORE: OverRun Error flag |
| emilmont | 77:869cf507173a | 273 | * @arg IRDA_FLAG_NE: Noise Error flag |
| emilmont | 77:869cf507173a | 274 | * @arg IRDA_FLAG_FE: Framing Error flag |
| emilmont | 77:869cf507173a | 275 | * @arg IRDA_FLAG_PE: Parity Error flag |
| emilmont | 77:869cf507173a | 276 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
| emilmont | 77:869cf507173a | 277 | */ |
| emilmont | 77:869cf507173a | 278 | #define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
| emilmont | 77:869cf507173a | 279 | |
| emilmont | 77:869cf507173a | 280 | /** @brief Clears the specified IRDA pending flag. |
| emilmont | 77:869cf507173a | 281 | * @param __HANDLE__: specifies the USART Handle. |
| emilmont | 77:869cf507173a | 282 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 283 | * UART peripheral. |
| emilmont | 77:869cf507173a | 284 | * @param __FLAG__: specifies the flag to check. |
| emilmont | 77:869cf507173a | 285 | * This parameter can be any combination of the following values: |
| emilmont | 77:869cf507173a | 286 | * @arg IRDA_FLAG_TC: Transmission Complete flag. |
| emilmont | 77:869cf507173a | 287 | * @arg IRDA_FLAG_RXNE: Receive data register not empty flag. |
| emilmont | 77:869cf507173a | 288 | * |
| emilmont | 77:869cf507173a | 289 | * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun |
| emilmont | 77:869cf507173a | 290 | * error) and IDLE (Idle line detected) flags are cleared by software |
| emilmont | 77:869cf507173a | 291 | * sequence: a read operation to USART_SR register followed by a read |
| emilmont | 77:869cf507173a | 292 | * operation to USART_DR register. |
| emilmont | 77:869cf507173a | 293 | * @note RXNE flag can be also cleared by a read to the USART_DR register. |
| emilmont | 77:869cf507173a | 294 | * @note TC flag can be also cleared by software sequence: a read operation to |
| emilmont | 77:869cf507173a | 295 | * USART_SR register followed by a write operation to USART_DR register. |
| emilmont | 77:869cf507173a | 296 | * @note TXE flag is cleared only by a write to the USART_DR register. |
| emilmont | 77:869cf507173a | 297 | * |
| emilmont | 77:869cf507173a | 298 | * @retval None |
| emilmont | 77:869cf507173a | 299 | */ |
| Kojto | 90:cb3d968589d8 | 300 | #define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
| Kojto | 90:cb3d968589d8 | 301 | |
| Kojto | 90:cb3d968589d8 | 302 | /** @brief Clear the IRDA PE pending flag. |
| Kojto | 90:cb3d968589d8 | 303 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 304 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 305 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 306 | * @retval None |
| Kojto | 90:cb3d968589d8 | 307 | */ |
| Kojto | 99:dbbf35b96557 | 308 | #define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \ |
| Kojto | 99:dbbf35b96557 | 309 | do{ \ |
| Kojto | 99:dbbf35b96557 | 310 | __IO uint32_t tmpreg; \ |
| Kojto | 99:dbbf35b96557 | 311 | tmpreg = (__HANDLE__)->Instance->SR; \ |
| Kojto | 99:dbbf35b96557 | 312 | UNUSED(tmpreg); \ |
| Kojto | 99:dbbf35b96557 | 313 | } while(0) |
| Kojto | 99:dbbf35b96557 | 314 | |
| Kojto | 90:cb3d968589d8 | 315 | /** @brief Clear the IRDA FE pending flag. |
| Kojto | 90:cb3d968589d8 | 316 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 317 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 318 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 319 | * @retval None |
| Kojto | 90:cb3d968589d8 | 320 | */ |
| Kojto | 90:cb3d968589d8 | 321 | #define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| emilmont | 77:869cf507173a | 322 | |
| Kojto | 90:cb3d968589d8 | 323 | /** @brief Clear the IRDA NE pending flag. |
| Kojto | 90:cb3d968589d8 | 324 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 325 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 326 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 327 | * @retval None |
| Kojto | 90:cb3d968589d8 | 328 | */ |
| Kojto | 90:cb3d968589d8 | 329 | #define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 330 | |
| Kojto | 90:cb3d968589d8 | 331 | /** @brief Clear the IRDA ORE pending flag. |
| Kojto | 90:cb3d968589d8 | 332 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 333 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 334 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 335 | * @retval None |
| Kojto | 90:cb3d968589d8 | 336 | */ |
| Kojto | 90:cb3d968589d8 | 337 | #define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 338 | |
| Kojto | 90:cb3d968589d8 | 339 | /** @brief Clear the IRDA IDLE pending flag. |
| Kojto | 90:cb3d968589d8 | 340 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 90:cb3d968589d8 | 341 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 342 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 343 | * @retval None |
| Kojto | 90:cb3d968589d8 | 344 | */ |
| Kojto | 90:cb3d968589d8 | 345 | #define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| emilmont | 77:869cf507173a | 346 | |
| emilmont | 77:869cf507173a | 347 | /** @brief Enables or disables the specified IRDA interrupt. |
| emilmont | 77:869cf507173a | 348 | * @param __HANDLE__: specifies the USART Handle. |
| emilmont | 77:869cf507173a | 349 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 350 | * UART peripheral. |
| emilmont | 77:869cf507173a | 351 | * @param __INTERRUPT__: specifies the IRDA interrupt source to check. |
| emilmont | 77:869cf507173a | 352 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 353 | * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
| emilmont | 77:869cf507173a | 354 | * @arg IRDA_IT_TC: Transmission complete interrupt |
| emilmont | 77:869cf507173a | 355 | * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
| emilmont | 77:869cf507173a | 356 | * @arg IRDA_IT_IDLE: Idle line detection interrupt |
| emilmont | 77:869cf507173a | 357 | * @arg IRDA_IT_PE: Parity Error interrupt |
| emilmont | 77:869cf507173a | 358 | * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| emilmont | 77:869cf507173a | 359 | * @retval None |
| emilmont | 77:869cf507173a | 360 | */ |
| emilmont | 77:869cf507173a | 361 | #define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| Kojto | 99:dbbf35b96557 | 362 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 363 | ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK))) |
| emilmont | 77:869cf507173a | 364 | #define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| Kojto | 99:dbbf35b96557 | 365 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| Kojto | 99:dbbf35b96557 | 366 | ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK))) |
| emilmont | 77:869cf507173a | 367 | |
| emilmont | 77:869cf507173a | 368 | /** @brief Checks whether the specified IRDA interrupt has occurred or not. |
| emilmont | 77:869cf507173a | 369 | * @param __HANDLE__: specifies the USART Handle. |
| emilmont | 77:869cf507173a | 370 | * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 371 | * UART peripheral. |
| emilmont | 77:869cf507173a | 372 | * @param __IT__: specifies the IRDA interrupt source to check. |
| emilmont | 77:869cf507173a | 373 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 374 | * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
| emilmont | 77:869cf507173a | 375 | * @arg IRDA_IT_TC: Transmission complete interrupt |
| emilmont | 77:869cf507173a | 376 | * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
| emilmont | 77:869cf507173a | 377 | * @arg IRDA_IT_IDLE: Idle line detection interrupt |
| emilmont | 77:869cf507173a | 378 | * @arg USART_IT_ERR: Error interrupt |
| emilmont | 77:869cf507173a | 379 | * @arg IRDA_IT_PE: Parity Error interrupt |
| emilmont | 77:869cf507173a | 380 | * @retval The new state of __IT__ (TRUE or FALSE). |
| emilmont | 77:869cf507173a | 381 | */ |
| emilmont | 77:869cf507173a | 382 | #define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ |
| emilmont | 77:869cf507173a | 383 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK)) |
| emilmont | 77:869cf507173a | 384 | |
| Kojto | 99:dbbf35b96557 | 385 | /** @brief Macro to enable the IRDA's one bit sample method |
| Kojto | 99:dbbf35b96557 | 386 | * @param __HANDLE__: specifies the IRDA Handle. |
| Kojto | 99:dbbf35b96557 | 387 | * @retval None |
| Kojto | 99:dbbf35b96557 | 388 | */ |
| Kojto | 99:dbbf35b96557 | 389 | #define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
| emilmont | 77:869cf507173a | 390 | |
| Kojto | 99:dbbf35b96557 | 391 | /** @brief Macro to disable the IRDA's one bit sample method |
| Kojto | 99:dbbf35b96557 | 392 | * @param __HANDLE__: specifies the IRDA Handle. |
| Kojto | 99:dbbf35b96557 | 393 | * @retval None |
| Kojto | 99:dbbf35b96557 | 394 | */ |
| Kojto | 99:dbbf35b96557 | 395 | #define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) |
| emilmont | 77:869cf507173a | 396 | |
| Kojto | 99:dbbf35b96557 | 397 | /** @brief Enable UART/USART associated to IRDA Handle |
| Kojto | 99:dbbf35b96557 | 398 | * @param __HANDLE__: specifies the IRDA Handle. |
| Kojto | 99:dbbf35b96557 | 399 | * IRDA Handle selects the USARTx or UARTy peripheral |
| Kojto | 99:dbbf35b96557 | 400 | * (USART,UART availability and x,y values depending on device). |
| Kojto | 99:dbbf35b96557 | 401 | * @retval None |
| Kojto | 99:dbbf35b96557 | 402 | */ |
| Kojto | 99:dbbf35b96557 | 403 | #define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
| Kojto | 99:dbbf35b96557 | 404 | |
| Kojto | 99:dbbf35b96557 | 405 | /** @brief Disable UART/USART associated to IRDA Handle |
| Kojto | 99:dbbf35b96557 | 406 | * @param __HANDLE__: specifies the IRDA Handle. |
| Kojto | 99:dbbf35b96557 | 407 | * IRDA Handle selects the USARTx or UARTy peripheral |
| Kojto | 99:dbbf35b96557 | 408 | * (USART,UART availability and x,y values depending on device). |
| Kojto | 99:dbbf35b96557 | 409 | * @retval None |
| Kojto | 99:dbbf35b96557 | 410 | */ |
| Kojto | 99:dbbf35b96557 | 411 | #define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
| emilmont | 77:869cf507173a | 412 | |
| Kojto | 99:dbbf35b96557 | 413 | /** |
| Kojto | 99:dbbf35b96557 | 414 | * @} |
| Kojto | 99:dbbf35b96557 | 415 | */ |
| emilmont | 77:869cf507173a | 416 | |
| emilmont | 77:869cf507173a | 417 | /* Exported functions --------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 418 | /** @addtogroup IRDA_Exported_Functions |
| Kojto | 99:dbbf35b96557 | 419 | * @{ |
| Kojto | 99:dbbf35b96557 | 420 | */ |
| Kojto | 99:dbbf35b96557 | 421 | |
| Kojto | 99:dbbf35b96557 | 422 | /** @addtogroup IRDA_Exported_Functions_Group1 |
| Kojto | 99:dbbf35b96557 | 423 | * @{ |
| Kojto | 99:dbbf35b96557 | 424 | */ |
| emilmont | 77:869cf507173a | 425 | /* Initialization/de-initialization functions **********************************/ |
| emilmont | 77:869cf507173a | 426 | HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); |
| emilmont | 77:869cf507173a | 427 | HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); |
| bogdanm | 81:7d30d6019079 | 428 | void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); |
| bogdanm | 81:7d30d6019079 | 429 | void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); |
| Kojto | 99:dbbf35b96557 | 430 | /** |
| Kojto | 99:dbbf35b96557 | 431 | * @} |
| Kojto | 99:dbbf35b96557 | 432 | */ |
| emilmont | 77:869cf507173a | 433 | |
| Kojto | 99:dbbf35b96557 | 434 | /** @addtogroup IRDA_Exported_Functions_Group2 |
| Kojto | 99:dbbf35b96557 | 435 | * @{ |
| Kojto | 99:dbbf35b96557 | 436 | */ |
| emilmont | 77:869cf507173a | 437 | /* IO operation functions *******************************************************/ |
| emilmont | 77:869cf507173a | 438 | HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| emilmont | 77:869cf507173a | 439 | HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| emilmont | 77:869cf507173a | 440 | HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 441 | HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 442 | HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 443 | HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| Kojto | 90:cb3d968589d8 | 444 | HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); |
| Kojto | 90:cb3d968589d8 | 445 | HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); |
| Kojto | 90:cb3d968589d8 | 446 | HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); |
| emilmont | 77:869cf507173a | 447 | void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); |
| bogdanm | 81:7d30d6019079 | 448 | void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); |
| bogdanm | 81:7d30d6019079 | 449 | void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); |
| Kojto | 90:cb3d968589d8 | 450 | void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); |
| Kojto | 90:cb3d968589d8 | 451 | void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); |
| bogdanm | 81:7d30d6019079 | 452 | void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); |
| Kojto | 99:dbbf35b96557 | 453 | /** |
| Kojto | 99:dbbf35b96557 | 454 | * @} |
| Kojto | 99:dbbf35b96557 | 455 | */ |
| emilmont | 77:869cf507173a | 456 | |
| Kojto | 99:dbbf35b96557 | 457 | /** @addtogroup IRDA_Exported_Functions_Group3 |
| Kojto | 99:dbbf35b96557 | 458 | * @{ |
| Kojto | 99:dbbf35b96557 | 459 | */ |
| emilmont | 77:869cf507173a | 460 | /* Peripheral State functions **************************************************/ |
| emilmont | 77:869cf507173a | 461 | HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); |
| Kojto | 99:dbbf35b96557 | 462 | uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); |
| Kojto | 99:dbbf35b96557 | 463 | /** |
| Kojto | 99:dbbf35b96557 | 464 | * @} |
| Kojto | 99:dbbf35b96557 | 465 | */ |
| Kojto | 99:dbbf35b96557 | 466 | |
| Kojto | 99:dbbf35b96557 | 467 | /** |
| Kojto | 99:dbbf35b96557 | 468 | * @} |
| Kojto | 99:dbbf35b96557 | 469 | */ |
| Kojto | 99:dbbf35b96557 | 470 | |
| Kojto | 99:dbbf35b96557 | 471 | /* Private types -------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 472 | /* Private variables ---------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 473 | /* Private constants ---------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 474 | /** @defgroup IRDA_Private_Constants IRDA Private Constants |
| Kojto | 99:dbbf35b96557 | 475 | * @{ |
| Kojto | 99:dbbf35b96557 | 476 | */ |
| Kojto | 99:dbbf35b96557 | 477 | |
| Kojto | 99:dbbf35b96557 | 478 | /** @brief IRDA interruptions flag mask |
| Kojto | 99:dbbf35b96557 | 479 | * |
| Kojto | 99:dbbf35b96557 | 480 | */ |
| Kojto | 99:dbbf35b96557 | 481 | #define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ |
| Kojto | 99:dbbf35b96557 | 482 | USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) |
| Kojto | 99:dbbf35b96557 | 483 | |
| Kojto | 99:dbbf35b96557 | 484 | |
| Kojto | 99:dbbf35b96557 | 485 | #define IRDA_CR1_REG_INDEX 1 |
| Kojto | 99:dbbf35b96557 | 486 | #define IRDA_CR2_REG_INDEX 2 |
| Kojto | 99:dbbf35b96557 | 487 | #define IRDA_CR3_REG_INDEX 3 |
| Kojto | 99:dbbf35b96557 | 488 | /** |
| Kojto | 99:dbbf35b96557 | 489 | * @} |
| Kojto | 99:dbbf35b96557 | 490 | */ |
| Kojto | 99:dbbf35b96557 | 491 | |
| Kojto | 99:dbbf35b96557 | 492 | /* Private macros --------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 493 | /** @defgroup IRDA_Private_Macros IRDA Private Macros |
| Kojto | 99:dbbf35b96557 | 494 | * @{ |
| Kojto | 99:dbbf35b96557 | 495 | */ |
| Kojto | 99:dbbf35b96557 | 496 | #define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \ |
| Kojto | 99:dbbf35b96557 | 497 | ((LENGTH) == IRDA_WORDLENGTH_9B)) |
| Kojto | 99:dbbf35b96557 | 498 | #define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \ |
| Kojto | 99:dbbf35b96557 | 499 | ((PARITY) == IRDA_PARITY_EVEN) || \ |
| Kojto | 99:dbbf35b96557 | 500 | ((PARITY) == IRDA_PARITY_ODD)) |
| Kojto | 99:dbbf35b96557 | 501 | #define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) |
| Kojto | 99:dbbf35b96557 | 502 | #define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \ |
| Kojto | 99:dbbf35b96557 | 503 | ((MODE) == IRDA_POWERMODE_NORMAL)) |
| Kojto | 99:dbbf35b96557 | 504 | #define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201) |
| Kojto | 99:dbbf35b96557 | 505 | |
| Kojto | 99:dbbf35b96557 | 506 | #define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) |
| Kojto | 99:dbbf35b96557 | 507 | #define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100) |
| Kojto | 99:dbbf35b96557 | 508 | #define IRDA_DIVFRAQ(_PCLK_, _BAUD_) (((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) |
| Kojto | 99:dbbf35b96557 | 509 | #define IRDA_BRR(_PCLK_, _BAUD_) ((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F)) |
| Kojto | 99:dbbf35b96557 | 510 | |
| Kojto | 99:dbbf35b96557 | 511 | /** |
| Kojto | 99:dbbf35b96557 | 512 | * @} |
| Kojto | 99:dbbf35b96557 | 513 | */ |
| Kojto | 99:dbbf35b96557 | 514 | |
| Kojto | 99:dbbf35b96557 | 515 | /* Private functions ---------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 516 | /** @defgroup IRDA_Private_Functions IRDA Private Functions |
| Kojto | 99:dbbf35b96557 | 517 | * @{ |
| Kojto | 99:dbbf35b96557 | 518 | */ |
| Kojto | 99:dbbf35b96557 | 519 | |
| Kojto | 99:dbbf35b96557 | 520 | /** |
| Kojto | 99:dbbf35b96557 | 521 | * @} |
| Kojto | 99:dbbf35b96557 | 522 | */ |
| emilmont | 77:869cf507173a | 523 | |
| emilmont | 77:869cf507173a | 524 | /** |
| emilmont | 77:869cf507173a | 525 | * @} |
| emilmont | 77:869cf507173a | 526 | */ |
| emilmont | 77:869cf507173a | 527 | |
| emilmont | 77:869cf507173a | 528 | /** |
| emilmont | 77:869cf507173a | 529 | * @} |
| emilmont | 77:869cf507173a | 530 | */ |
| emilmont | 77:869cf507173a | 531 | |
| emilmont | 77:869cf507173a | 532 | #ifdef __cplusplus |
| emilmont | 77:869cf507173a | 533 | } |
| emilmont | 77:869cf507173a | 534 | #endif |
| emilmont | 77:869cf507173a | 535 | |
| emilmont | 77:869cf507173a | 536 | #endif /* __STM32F4xx_HAL_IRDA_H */ |
| emilmont | 77:869cf507173a | 537 | |
| emilmont | 77:869cf507173a | 538 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |