us915 ch 9 20dbm
Dependents: DISCO-L072CZ-LRWAN1_LoRa_PingPong
Fork of SX1276GenericLib by
LoRa_TODO.txt
- Committer:
- Helmut Tschemernjak
- Date:
- 2017-05-11
- Revision:
- 46:e78a1d0391ac
- Parent:
- 44:544add59b26d
- Child:
- 50:43f7160e869c
File content as of revision 46:e78a1d0391ac:
Move finished tasks to Done section: TODOs: - add support for Arduino - add sx1276-Arduino-hal.h/cpp - add support for Linux - add sx1276-Linux-hal.h/cpp - Add support for Cad detection before sending a packet - Add support to provide the send/receive packet buffer, no need to allocate packet data in the sx1276 driver. Can be provided Rx/Tx parameters, this avoids double memory usage - Add support for larger Lora packets (can be up to 2048 bytes) this feature is not so important, however the current implementation is very basic. - It is a little bit strange that RX/TX/Cad Timeout Timer calling the some handler OnTimeoutIrq. Maybe we just need a single timer, or it is a good idea to split the OnTimeoutIrq function into separate callbacks for RX/TX/Cad timeouts - Test if the SX1276 timeouts. Does rx/tx/sync really uses three different timers or just one at a time. Done: - Started a Generic SX1276 driver to support all SX1276 modules (May-2017 Helmut) - Migrated typedefs code into sx1276.h (7-May-2017 Helmut) - Migrated enum code into sx1276.h/radio.h (7-May-2017 Helmut) - Verify the Murata ANT Switch code - MURATA PA_BOOST case,is _antSwitchTXBoost right? (Same as STM sample code) - Check of the MURATA TCXO config is correct (implemented, check JP9 on STM L0 board) - Make the timers more generic and move the OS code into the HAL layer. (May Helmut) - Removed pull down on dio=-dio5 for L151 &LPC11U6X which make no sense to me. May 2017 Helmut