Diff: sx1276/sx1276-hal.h

Revision:

36:f2b885b6f33e

Parent:

35:c278a826a8e2

Child:

37:21fa0615e993

--- a/sx1276/sx1276-hal.h	Sat May 06 13:58:14 2017 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,247 +0,0 @@
-/*
- / _____)             _              | |
-( (____  _____ ____ _| |_ _____  ____| |__
- \____ \| ___ |    (_   _) ___ |/ ___)  _ \
- _____) ) ____| | | || |_| ____( (___| | | |
-(______/|_____)_|_|_| \__)_____)\____)_| |_|
-    (C) 2014 Semtech
-
-Description: -
-
-License: Revised BSD License, see LICENSE.TXT file include in the project
-
-Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
-*/
-
-/*
- * additional development to make it more generic across multiple os versions
- * (c) 2017 Helmut Tschemernjak
- * 30826 Garbsen (Hannover) Germany
- */
-
-#ifndef __SX1276_HAL_H__
-#define __SX1276_HAL_H__
-#include "sx1276.h"
-
-/*!
- * @brief Radio hardware registers initialization definition
- *
- * @remark Can be automatically generated by the SX1276 GUI (not yet implemented)
- */
-#define RADIO_INIT_REGISTERS_VALUE                \
-{                                                 \
-    { MODEM_FSK , REG_LNA                , 0x23 },\
-    { MODEM_FSK , REG_RXCONFIG           , 0x1E },\
-    { MODEM_FSK , REG_RSSICONFIG         , 0xD2 },\
-    { MODEM_FSK , REG_AFCFEI             , 0x01 },\
-    { MODEM_FSK , REG_PREAMBLEDETECT     , 0xAA },\
-    { MODEM_FSK , REG_OSC                , 0x07 },\
-    { MODEM_FSK , REG_SYNCCONFIG         , 0x12 },\
-    { MODEM_FSK , REG_SYNCVALUE1         , 0xC1 },\
-    { MODEM_FSK , REG_SYNCVALUE2         , 0x94 },\
-    { MODEM_FSK , REG_SYNCVALUE3         , 0xC1 },\
-    { MODEM_FSK , REG_PACKETCONFIG1      , 0xD8 },\
-    { MODEM_FSK , REG_FIFOTHRESH         , 0x8F },\
-    { MODEM_FSK , REG_IMAGECAL           , 0x02 },\
-    { MODEM_FSK , REG_DIOMAPPING1        , 0x00 },\
-    { MODEM_FSK , REG_DIOMAPPING2        , 0x30 },\
-    { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },\
-}                                                 \
-
-/*! 
- * Actual implementation of a SX1276 radio, includes some modifications to make it compatible with the MB1 LAS board
- */
-class SX1276Generic : public SX1276
-{
-protected:
-    /*!
-     * Antenna switch GPIO pins objects
-     */
-    DigitalInOut *_antSwitch;
-    DigitalInOut *_antSwitchTX;
-    DigitalInOut *_antSwitchTXBoost;
-
-    /*!
-     * SX1276 Reset pin
-     */
-    DigitalInOut *_reset;
-    
-    /*!
-     * TCXO being used with the Murata Module
-     */
-    DigitalOut *_tcxo;
-
-    /*!
-     * SPI Interface
-     */
-    SPI *_spi; // mosi, miso, sclk
-    DigitalOut *_nss;
-    
-    /*!
-     * SX1276 DIO pins
-     */
-    InterruptIn *_dio0;
-    InterruptIn *_dio1;
-    InterruptIn *_dio2;
-    InterruptIn *_dio3;
-    InterruptIn *_dio4;
-    DigitalIn *_dio5;
-    
-private:
-    static const RadioRegisters_t RadioRegsInit[];
-
-public:
-    SX1276Generic( RadioEvents_t *events, BoardType_t board,
-            PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
-            PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
-            PinName antSwitch = NC, PinName antSwitchTX= NC, PinName antSwitchTXBoost = NC, PinName tcxo = NC);
-
-    
-    SX1276Generic( RadioEvents_t *events );
-
-    virtual ~SX1276Generic();
-
-protected:
-    /*!
-     * @brief Initializes the radio I/Os pins interface
-     */
-    virtual void IoInit( void );
-
-    /*!
-     *  @brief Initializes the radio registers
-     */
-    virtual void RadioRegistersInit( );
-    
-    /*!
-     * @brief Initializes the radio SPI
-     */
-    virtual void SpiInit( void );
-
-    /*!
-     * @brief Initializes DIO IRQ handlers
-     *
-     * @param [IN] irqHandlers Array containing the IRQ callback functions
-     */
-    virtual void IoIrqInit( DioIrqHandler *irqHandlers );
-
-    /*!
-     * @brief De-initializes the radio I/Os pins interface. 
-     *
-     * \remark Useful when going in MCU lowpower modes
-     */
-    virtual void IoDeInit( void );
-
-    /*!
-     * \brief Sets the radio output power.
-     *
-     * @param [IN] power Sets the RF output power
-     */
-    virtual void SetRfTxPower( int8_t power );
-
-    /*!
-     * @brief Gets the board PA selection configuration
-     *
-     * @param [IN] channel Channel frequency in Hz
-     * @retval PaSelect RegPaConfig PaSelect value
-     */
-    virtual uint8_t GetPaSelect( uint32_t channel );
-
-    /*!
-     * @brief Set the RF Switch I/Os pins in Low Power mode
-     *
-     * @param [IN] status enable or disable
-     */
-    virtual void SetAntSwLowPower( bool status );
-
-    /*!
-     * @brief Initializes the RF Switch I/Os pins interface
-     */
-    virtual void AntSwInit( void );
-
-    /*!
-     * @brief De-initializes the RF Switch I/Os pins interface 
-     *
-     * @remark Needed to decrease the power consumption in MCU lowpower modes
-     */
-    virtual void AntSwDeInit( void );
-
-    /*!
-     * @brief Controls the antena switch if necessary.
-     *
-     * @remark see errata note
-     *
-     * @param [IN] opMode Current radio operating mode
-     */
-    virtual void SetAntSw( uint8_t opMode );
-
-public:
-    /*!
-     * @brief Detect the board connected by reading the value of the antenna switch pin
-     */
-	virtual uint8_t DetectBoardType( void );
-
-    /*!
-     * @brief Checks if the given RF frequency is supported by the hardware
-     *
-     * @param [IN] frequency RF frequency to be checked
-     * @retval isSupported [true: supported, false: unsupported]
-     */
-    virtual bool CheckRfFrequency( uint32_t frequency );
-
-    /*!
-     * @brief Writes the radio register at the specified address
-     *
-     * @param [IN]: addr Register address
-     * @param [IN]: data New register value
-     */
-    virtual void Write ( uint8_t addr, uint8_t data ) ;
-
-    /*!
-     * @brief Reads the radio register at the specified address
-     *
-     * @param [IN]: addr Register address
-     * @retval data Register value
-     */
-    virtual uint8_t Read ( uint8_t addr ) ;
-
-    /*!
-     * @brief Writes multiple radio registers starting at address
-     *
-     * @param [IN] addr   First Radio register address
-     * @param [IN] buffer Buffer containing the new register's values
-     * @param [IN] size   Number of registers to be written
-     */
-    virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
-
-    /*!
-     * @brief Reads multiple radio registers starting at address
-     *
-     * @param [IN] addr First Radio register address
-     * @param [OUT] buffer Buffer where to copy the registers data
-     * @param [IN] size Number of registers to be read
-     */
-    virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
-
-    /*!
-     * @brief Writes the buffer contents to the SX1276 FIFO
-     *
-     * @param [IN] buffer Buffer containing data to be put on the FIFO.
-     * @param [IN] size Number of bytes to be written to the FIFO
-     */
-    virtual void WriteFifo( uint8_t *buffer, uint8_t size ) ;
-
-    /*!
-     * @brief Reads the contents of the SX1276 FIFO
-     *
-     * @param [OUT] buffer Buffer where to copy the FIFO read data.
-     * @param [IN] size Number of bytes to be read from the FIFO
-     */
-    virtual void ReadFifo( uint8_t *buffer, uint8_t size ) ;
-
-    /*!
-     * @brief Reset the SX1276
-     */
-    virtual void Reset( void );
-};
-
-#endif // __SX1276_HAL_H__