Diff: sx1276/sx1276-arduino-hal.h

Revision:

65:b2d98328fcba

Parent:

64:b721e6ab656a

Child:

66:fbb2da34bd9a

--- a/sx1276/sx1276-arduino-hal.h	Fri Jun 30 16:08:05 2017 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,240 +0,0 @@
-
-/*
- * This file contains a copy of the master content sx1276-mbed-hal.h
- * with adaption for the Arduino environment
- * (c) 2017 Helmut Tschemernjak
- * 30826 Garbsen (Hannover) Germany
- */
-#ifdef ARDUINO
-
-/*
- (C) 2014 Semtech
- Description: -
- License: Revised BSD License, see LICENSE.TXT file include in the project
- Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
- */
-
-/*
- * additional development to make it more generic across multiple OS versions
- * (c) 2017 Helmut Tschemernjak
- * 30826 Garbsen (Hannover) Germany
- */
-
-#ifndef __SX1276_ARDUINO_HAL_H__
-#define __SX1276_ARDUINO_HAL_H__
-#include "sx1276.h"
-
-
-
-/*!
- * Actual implementation of a SX1276 radio, includes some modifications to make it compatible with the MB1 LAS board
- */
-class SX1276Generic : public SX1276
-{
-protected:
-    /*!
-     * Antenna switch GPIO pins objects
-     */
-    DigitalOut *_antSwitch;
-    DigitalOut *_antSwitchTX;
-    DigitalOut *_antSwitchTXBoost;
-    
-    /*!
-     * SX1276 Reset pin
-     */
-    DigitalInOut *_reset;
-    
-    /*!
-     * TCXO being used with the Murata Module
-     */
-    DigitalOut *_tcxo;
-    
-    /*!
-     * SPI Interface
-     */
-    SPI *_spi; // mosi, miso, sclk
-    DigitalOut *_nss;
-    
-    /*!
-     * SX1276 DIO pins
-     */
-    InterruptIn *_dio0;
-    InterruptIn *_dio1;
-    InterruptIn *_dio2;
-    InterruptIn *_dio3;
-    InterruptIn *_dio4;
-    DigitalIn *_dio5;
-    
-    /*!
-     * Tx and Rx timers
-     */
-    Timeout txTimeoutTimer;
-    Timeout rxTimeoutTimer;
-    Timeout rxTimeoutSyncWord;
-    
-    
-private:
-    /*!
-     * triggers definition
-     */
-    typedef void (SX1276Generic::*Trigger)(void);
-    
-    
-    public:
-    SX1276Generic( RadioEvents_t *events, BoardType_t board,
-                  PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
-                  PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
-                  PinName antSwitch = NC, PinName antSwitchTX= NC, PinName antSwitchTXBoost = NC, PinName tcxo = NC);
-    
-    
-    SX1276Generic( RadioEvents_t *events );
-    
-    virtual ~SX1276Generic();
-    
-protected:
-    /*!
-     * @brief Initializes the radio I/Os pins interface
-     */
-    virtual void IoInit( void );
-    
-    /*!
-     * @brief Initializes the radio SPI
-     */
-    virtual void SpiInit( void );
-    
-    /*!
-     * @brief Initializes DIO IRQ handlers
-     *
-     * @param [IN] irqHandlers Array containing the IRQ callback functions
-     */
-    virtual void IoIrqInit( DioIrqHandler *irqHandlers );
-    
-    /*!
-     * @brief De-initializes the radio I/Os pins interface.
-     *
-     * \remark Useful when going in MCU lowpower modes
-     */
-    virtual void IoDeInit( void );
-
-    /*!
-     * @brief Gets the board PA selection configuration
-     *
-     * @param [IN] channel Channel frequency in Hz
-     * @retval PaSelect RegPaConfig PaSelect value
-     */
-    virtual uint8_t GetPaSelect( uint32_t channel );
-    
-    /*!
-     * @brief Set the RF Switch I/Os pins in Low Power mode
-     *
-     * @param [IN] status enable or disable
-     */
-    virtual void SetAntSwLowPower( bool status );
-    
-    /*!
-     * @brief Initializes the RF Switch I/Os pins interface
-     */
-    virtual void AntSwInit( void );
-    
-    /*!
-     * @brief De-initializes the RF Switch I/Os pins interface
-     *
-     * @remark Needed to decrease the power consumption in MCU lowpower modes
-     */
-    virtual void AntSwDeInit( void );
-    
-    /*!
-     * @brief Controls the antena switch if necessary.
-     *
-     * @remark see errata note
-     *
-     * @param [IN] opMode Current radio operating mode
-     */
-    virtual void SetAntSw( uint8_t opMode );
-    
-    /*
-     * The the Timeout for a given Timer.
-     */
-    virtual void SetTimeout(TimeoutTimer_t timer, timeoutFuncPtr, int timeout_ms = 0);
-    
-    public:
-    
-    /*!
-     * @brief Detect the board connected by reading the value of the antenna switch pin
-     */
-    virtual uint8_t DetectBoardType( void );
-    
-    /*!
-     * @brief Checks if the given RF frequency is supported by the hardware
-     *
-     * @param [IN] frequency RF frequency to be checked
-     * @retval isSupported [true: supported, false: unsupported]
-     */
-    virtual bool CheckRfFrequency( uint32_t frequency );
-    
-    /*!
-     * @brief Writes the radio register at the specified address
-     *
-     * @param [IN]: addr Register address
-     * @param [IN]: data New register value
-     */
-    virtual void Write ( uint8_t addr, uint8_t data ) ;
-    
-    /*!
-     * @brief Reads the radio register at the specified address
-     *
-     * @param [IN]: addr Register address
-     * @retval data Register value
-     */
-    virtual uint8_t Read ( uint8_t addr ) ;
-    
-    /*!
-     * @brief Writes multiple radio registers starting at address
-     *
-     * @param [IN] addr   First Radio register address
-     * @param [IN] buffer Buffer containing the new register's values
-     * @param [IN] size   Number of registers to be written
-     */
-    virtual void Write( uint8_t addr, void *buffer, uint8_t size ) ;
-    
-    /*!
-     * @brief Reads multiple radio registers starting at address
-     *
-     * @param [IN] addr First Radio register address
-     * @param [OUT] buffer Buffer where to copy the registers data
-     * @param [IN] size Number of registers to be read
-     */
-    virtual void Read ( uint8_t addr, void *buffer, uint8_t size ) ;
-    
-    /*!
-     * @brief Writes the buffer contents to the SX1276 FIFO
-     *
-     * @param [IN] buffer Buffer containing data to be put on the FIFO.
-     * @param [IN] size Number of bytes to be written to the FIFO
-     */
-    virtual void WriteFifo( void *buffer, uint8_t size ) ;
-    
-    /*!
-     * @brief Reads the contents of the SX1276 FIFO
-     *
-     * @param [OUT] buffer Buffer where to copy the FIFO read data.
-     * @param [IN] size Number of bytes to be read from the FIFO
-     */
-    virtual void ReadFifo( void *buffer, uint8_t size ) ;
-    
-    /*!
-     * @brief Reset the SX1276
-     */
-    virtual void Reset( void );
-
-    /*!
-     * \brief Sets the radio output power.
-     *
-     * @param [IN] power Sets the RF output power
-     */
-    virtual void SetRfTxPower( int8_t power );
-
-};
-
-#endif // __SX1276_ARDUINO_HAL_H__
-#endif // ARDUINO