A simple project for sending button input up to AT&T Flow
Dependencies: FXOS8700CQ MODSERIAL mbed
For instructions on using this program, see the AT&T Starter Kit tutorial on it.
config_me.h
- Committer:
- rfinn
- Date:
- 2016-08-09
- Revision:
- 68:d38834307b17
- Parent:
- 58:c417fbc39c22
- Child:
- 69:a99e384b720f
File content as of revision 68:d38834307b17:
#ifndef __CONFIG_ME_H_ #define __CONFIG_ME_H_ // User must set these for own context: #define BUF_SIZE_FOR_N_MAX_SOCKREAD (10) #define MAX_WNC_SOCKREAD_PAYLOAD (1500) // This is the server's base URL name. Example "www.google.com" // Note that when you Fork a FLOW, it will typically assign either // "run-east.att.io" or "run-west.att.io", so be sure to check this. static const char * MY_SERVER_URL = "run-west.att.io"; // CHECK ME, might be different //This is for normal HTTP. If you want to use TCP to a specific port, change that here: static const char * MY_PORT_STR = "0000"; // CHANGE ME // These are FLOW fields from the Endpoints tab: #define FLOW_BASE_URL "/..../in/flow" // CHANGE ME #define FLOW_INPUT_NAME "/buttons" // Unless you want to use a different protocol, this field should be left as is: #define FLOW_URL_TYPE " HTTP/1.1\r\nHost: " // This identifier specifies with which FLOW device you are communicating. // If you only have one devive there then you can just leave this as is. // Once your FLOW device has been initialized (Virtual Device Initialize clicked), // the Virtual Device will show up in M2X. This is its "DEVICE SERIAL" field #define M2X_DEVICE_SERIAL "starterkit001" // This constant defines how often sensors are read and sent up to FLOW #define SENSOR_UPDATE_INTERVAL_MS 5000; //5 seconds // This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit: static const char * MY_APN_STR = "m2m.com.attz"; #endif