TextLCD - ok

Users » reiniermarcel » Code » TextLCD

TextLCD.cpp@42:8ae59ca7c96c, 2015-11-30 (annotated)

Committer:: reiniermarcel
Date:: Mon Nov 30 11:07:20 2015 +0000
Revision:: 42:8ae59ca7c96c
Parent:: 41:111ca62e8a59

ok

Who changed what in which revision?

User	Revision	Line number	New contents of line
wim	37:ce348c002929	1	/* mbed TextLCD Library, for LCDs based on HD44780 controllers
simon	6:e4cb7ddee0d3	2	* Copyright (c) 2007-2010, sford, http://mbed.org
wim	14:0c32b66b14b8	3	* 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
wim	14:0c32b66b14b8	4	* 2013, v02: WH, Added I2C and SPI bus interfaces
wim	15:b70ebfffb258	5	* 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
wim	18:bd65dc10f27f	6	* 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
wim	18:bd65dc10f27f	7	* 2013, v05: WH, Added support for 8x2B, added some UDCs
wim	19:c747b9e2e7b8	8	* 2013, v06: WH, Added support for devices that use internal DC/DC converters
wim	20:e0da005a777f	9	* 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
wim	22:35742ec80c24	10	* 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined pins
wim	25:6162b31128c9	11	* 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
wim	26:bd897a001012	12	* 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
wim	30:033048611c01	13	* 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
wim	32:59c4b8f648d4	14	* 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
wim	34:e5a0dcb43ecc	15	* 2014, v13: WH, Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink() method for supported devices (eg SSD1803), fixed issue in setPower()
wim	34:e5a0dcb43ecc	16	* 2014, v14: WH, Added support for PT6314 (VFD), added setOrient() method for supported devices (eg SSD1803, US2066), added Double Height lines for supported devices,
wim	34:e5a0dcb43ecc	17	* added 16 UDCs for supported devices (eg PCF2103), moved UDC defines to TextLCD_UDC file, added TextLCD_Config.h for feature and footprint settings.
wim	35:311be6444a39	18	* 2014, v15: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
wim	36:9f5f86dfd44a	19	* 2014, v16: WH, Added ST7070 and KS0073 support, added setIcon(), clrIcon() and setInvert() method for supported devices
wim	37:ce348c002929	20	* 2015, v17: WH, Clean up low-level _writeCommand() and _writeData(), Added support for alternative fonttables (eg PCF21XX), Added ST7066_ACM controller for ACM1602 module
wim	38:cbe275b0b647	21	* 2015, v18: WH, Performance improvement I2C portexpander
wim	38:cbe275b0b647	22	* 2015, v19: WH, Fixed Adafruit I2C/SPI portexpander pinmappings, fixed SYDZ Backlight
wim	39:e9c2319de9c5	23	* 2015, v20: WH, Fixed occasional Init fail caused by insufficient wait time after ReturnHome command (0x02), Added defines to reduce memory footprint (eg LCD_ICON),
wim	40:d3496c3ea301	24	* Fixed and Added more fonttable support for PCF2119R_3V3, Added HD66712 controller.
wim	41:111ca62e8a59	25	* 2015, v21: WH, Added LCD32x2 defines and code, Fixed KS0073 DL=1 init for SPI, Added defines to reduce memory footprint (LCD_TWO_CTRL, LCD_CONTRAST, LCD_UTF8_FONT)
wim	41:111ca62e8a59	26	* Added SPLC792A controller, Added UTF8_2_LCD decode for Cyrilic font (By Andriy Ribalko). Added setFont()
simon	1:ac48b187213c	27	*
simon	1:ac48b187213c	28	* Permission is hereby granted, free of charge, to any person obtaining a copy
simon	1:ac48b187213c	29	* of this software and associated documentation files (the "Software"), to deal
simon	1:ac48b187213c	30	* in the Software without restriction, including without limitation the rights
simon	1:ac48b187213c	31	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
simon	1:ac48b187213c	32	* copies of the Software, and to permit persons to whom the Software is
simon	1:ac48b187213c	33	* furnished to do so, subject to the following conditions:
simon	1:ac48b187213c	34	*
simon	1:ac48b187213c	35	* The above copyright notice and this permission notice shall be included in
simon	1:ac48b187213c	36	* all copies or substantial portions of the Software.
simon	1:ac48b187213c	37	*
simon	1:ac48b187213c	38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
simon	1:ac48b187213c	39	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
simon	1:ac48b187213c	40	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
simon	1:ac48b187213c	41	* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
simon	1:ac48b187213c	42	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
simon	1:ac48b187213c	43	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
simon	1:ac48b187213c	44	* THE SOFTWARE.
simon	1:ac48b187213c	45	*/
wim	34:e5a0dcb43ecc	46	#include "mbed.h"
simon	1:ac48b187213c	47	#include "TextLCD.h"
wim	34:e5a0dcb43ecc	48	#include "TextLCD_UDC.inc"
wim	41:111ca62e8a59	49	#include "TextLCD_UTF8.inc"
wim	34:e5a0dcb43ecc	50
wim	21:9eb628d9e164	51	/** Create a TextLCD_Base interface
wim	15:b70ebfffb258	52	*
wim	21:9eb628d9e164	53	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	54	* @param ctrl LCD controller (default = HD44780)
wim	15:b70ebfffb258	55	*/
wim	21:9eb628d9e164	56	TextLCD_Base::TextLCD_Base(LCDType type, LCDCtrl ctrl) : _type(type), _ctrl(ctrl) {
wim	30:033048611c01	57
wim	30:033048611c01	58	// Extract LCDType data
wim	30:033048611c01	59
wim	41:111ca62e8a59	60	// Columns encoded in b15..b8
wim	41:111ca62e8a59	61	_nr_cols = (_type & LCD_T_COL_MSK) >> LCD_T_COL_SHFT;
wim	41:111ca62e8a59	62
wim	41:111ca62e8a59	63	// Rows encoded in b23..b16
wim	41:111ca62e8a59	64	_nr_rows = (_type & LCD_T_ROW_MSK) >> LCD_T_ROW_SHFT;
wim	41:111ca62e8a59	65
wim	41:111ca62e8a59	66	// Addressing mode encoded in b27..b24
wim	30:033048611c01	67	_addr_mode = _type & LCD_T_ADR_MSK;
wim	37:ce348c002929	68
wim	37:ce348c002929	69	// Font table, encoded in LCDCtrl
wim	39:e9c2319de9c5	70	_font = _ctrl & LCD_C_FNT_MSK;
wim	14:0c32b66b14b8	71	}
wim	14:0c32b66b14b8	72
wim	21:9eb628d9e164	73	/** Init the LCD Controller(s)
wim	21:9eb628d9e164	74	* Clear display
wim	36:9f5f86dfd44a	75	* @param _LCDDatalength dl sets the datalength of data/commands
wim	36:9f5f86dfd44a	76	* @return none
wim	21:9eb628d9e164	77	*/
wim	36:9f5f86dfd44a	78	void TextLCD_Base::_init(_LCDDatalength dl) {
wim	38:cbe275b0b647	79
wim	38:cbe275b0b647	80	wait_ms(100); // Wait 100ms to ensure powered up
wim	15:b70ebfffb258	81
wim	41:111ca62e8a59	82	#if (LCD_TWO_CTRL == 1)
wim	15:b70ebfffb258	83	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	84	if(_type==LCD40x4) {
wim	30:033048611c01	85	_ctrl_idx=_LCDCtrl_1; // Select 2nd controller
wim	36:9f5f86dfd44a	86	_initCtrl(dl); // Init 2nd controller
wim	15:b70ebfffb258	87	}
wim	41:111ca62e8a59	88	#endif
wim	15:b70ebfffb258	89
wim	15:b70ebfffb258	90	// Select and configure primary LCD controller
wim	27:22d5086f6ba6	91	_ctrl_idx=_LCDCtrl_0; // Select primary controller
wim	36:9f5f86dfd44a	92	_initCtrl(dl); // Init primary controller
wim	28:30fa94f7341c	93
wim	32:59c4b8f648d4	94	// Clear whole display and Reset Cursor location
wim	32:59c4b8f648d4	95	// Note: This will make sure that some 3-line displays that skip topline of a 4-line configuration
wim	32:59c4b8f648d4	96	// are cleared and init cursor correctly.
wim	32:59c4b8f648d4	97	cls();
wim	15:b70ebfffb258	98	}
wim	15:b70ebfffb258	99
wim	21:9eb628d9e164	100	/** Init the LCD controller
wim	36:9f5f86dfd44a	101	* Set number of lines, fonttype, no cursor etc
wim	36:9f5f86dfd44a	102	* The controller is accessed in 4-bit parallel mode either directly via mbed pins or through I2C or SPI expander.
wim	36:9f5f86dfd44a	103	* Some controllers also support native I2C or SPI interfaces.
wim	36:9f5f86dfd44a	104	*
wim	41:111ca62e8a59	105	* @param _LCDDatalength dl sets the 4 or 8 bit datalength of data/commands. Required for some native serial modes that dont work when DL=0.
wim	36:9f5f86dfd44a	106	* @return none
wim	30:033048611c01	107	*
wim	30:033048611c01	108	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	21:9eb628d9e164	109	*/
wim	36:9f5f86dfd44a	110	void TextLCD_Base::_initCtrl(_LCDDatalength dl) {
wim	32:59c4b8f648d4	111	int _bias_lines=0; // Set Bias and lines (Instr Set 1), temporary variable.
wim	32:59c4b8f648d4	112	int _lines=0; // Set lines (Ext Instr Set), temporary variable.
wim	36:9f5f86dfd44a	113
wim	26:bd897a001012	114	this->_setRS(false); // command mode
simon	1:ac48b187213c	115
wim	37:ce348c002929	116	if (dl == _LCD_DL_4) {
wim	37:ce348c002929	117	// The Controller could be in 8 bit mode (power-on reset) or in 4 bit mode (warm reboot) at this point.
wim	37:ce348c002929	118	// Follow this procedure to make sure the Controller enters the correct state. The hardware interface
wim	37:ce348c002929	119	// between the uP and the LCD can only write the 4 most significant bits (Most Significant Nibble, MSN).
wim	37:ce348c002929	120	// In 4 bit mode the LCD expects the MSN first, followed by the LSN.
wim	37:ce348c002929	121	//
wim	38:cbe275b0b647	122	// Current state: 8 bit mode \| 4 bit mode, MSN is next \| 4 bit mode, LSN is next
wim	37:ce348c002929	123	//-------------------------------------------------------------------------------------------------
wim	38:cbe275b0b647	124	_writeNibble(0x3); // set 8 bit mode (MSN) and dummy LSN, \| set 8 bit mode (MSN), \| set dummy LSN,
wim	38:cbe275b0b647	125	// remains in 8 bit mode \| remains in 4 bit mode \| remains in 4 bit mode
wim	37:ce348c002929	126	wait_ms(15); //
wim	37:ce348c002929	127
wim	38:cbe275b0b647	128	_writeNibble(0x3); // set 8 bit mode (MSN) and dummy LSN, \| set dummy LSN, \| set 8bit mode (MSN),
wim	38:cbe275b0b647	129	// remains in 8 bit mode \| change to 8 bit mode \| remains in 4 bit mode
wim	37:ce348c002929	130	wait_ms(15); //
wim	33:900a94bc7585	131
wim	38:cbe275b0b647	132	_writeNibble(0x3); // set 8 bit mode (MSN) and dummy LSN, \| set 8 bit mode (MSN) and dummy LSN, \| set dummy LSN,
wim	38:cbe275b0b647	133	// remains in 8 bit mode \| remains in 8 bit mode \| change to 8 bit mode
wim	37:ce348c002929	134	wait_ms(15); //
wim	37:ce348c002929	135
wim	37:ce348c002929	136	// Controller is now in 8 bit mode
wim	37:ce348c002929	137
wim	37:ce348c002929	138	_writeNibble(0x2); // Change to 4-bit mode (MSN), the LSN is undefined dummy
wim	37:ce348c002929	139	wait_us(40); // most instructions take 40us
wim	37:ce348c002929	140
wim	37:ce348c002929	141	// Controller is now in 4-bit mode
wim	37:ce348c002929	142	// Note: 4/8 bit mode is ignored for most native SPI and I2C devices. They dont use the parallel bus.
wim	37:ce348c002929	143	// However, _writeNibble() method is void anyway for native SPI and I2C devices.
wim	38:cbe275b0b647	144	}
wim	38:cbe275b0b647	145	else {
wim	38:cbe275b0b647	146	// Reset in 8 bit mode, final Function set will follow
wim	38:cbe275b0b647	147	_writeCommand(0x30); // Function set 0 0 1 DL=1 N F x x
wim	39:e9c2319de9c5	148	wait_ms(1); // most instructions take 40us
wim	37:ce348c002929	149	}
wim	25:6162b31128c9	150
wim	29:a3663151aa65	151	// Device specific initialisations: DC/DC converter to generate VLCD or VLED, number of lines etc
wim	19:c747b9e2e7b8	152	switch (_ctrl) {
wim	32:59c4b8f648d4	153
wim	36:9f5f86dfd44a	154	case KS0073:
wim	36:9f5f86dfd44a	155	// Initialise Display configuration
wim	36:9f5f86dfd44a	156	switch (_type) {
wim	41:111ca62e8a59	157	// case LCD6x1:
wim	36:9f5f86dfd44a	158	case LCD8x1: //8x1 is a regular 1 line display
wim	41:111ca62e8a59	159	// case LCD8x2B: //8x1 is a 16x1 line display
wim	36:9f5f86dfd44a	160	case LCD12x1:
wim	36:9f5f86dfd44a	161	case LCD16x1:
wim	36:9f5f86dfd44a	162	case LCD20x1:
wim	36:9f5f86dfd44a	163	case LCD24x1:
wim	36:9f5f86dfd44a	164	// case LCD32x1: // EXT pin is High, extension driver needed
wim	41:111ca62e8a59	165	// case LCD40x1: // EXT pin is High, extension driver needed
wim	41:111ca62e8a59	166	// case LCD52x1: // EXT pin is High, extension driver needed
wim	41:111ca62e8a59	167	_function = dl \| 0x02; // Set function, 0 0 1 DL, N, RE(0), DH, REV
wim	41:111ca62e8a59	168	// Note: 4 bit mode is NOT ignored for native SPI !
wim	41:111ca62e8a59	169	// DL=1 (8 bits bus), DL=0 (4 bits bus)
wim	41:111ca62e8a59	170	// N=0 (1-line mode), N=1 (2-line mode), dont care for 4 line mode
wim	41:111ca62e8a59	171	// RE=0 (Dis. Extended Regs, special mode for KS0073)
wim	41:111ca62e8a59	172	// DH=1 (Disp shift enable, special mode for KS0073)
wim	41:111ca62e8a59	173	// REV=0 (Reverse normal, special mode for KS0073)
wim	41:111ca62e8a59	174
wim	41:111ca62e8a59	175	_function_1 = dl \| 0x04; // Set function, 0 0 1 DL, N, RE(1), BE, LP (Ext Regs)
wim	41:111ca62e8a59	176	// Note: 4 bit mode is NOT ignored for native SPI !
wim	41:111ca62e8a59	177	// DL=1 (8 bits bus), DL=0 (4 bits bus)
wim	41:111ca62e8a59	178	// N=0 (1-line mode), N=1 (2-line mode), dont care for 4 line mode
wim	41:111ca62e8a59	179	// RE=1 (Ena Extended Regs, special mode for KS0073)
wim	41:111ca62e8a59	180	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0073)
wim	41:111ca62e8a59	181	// LP=0 (LP=1 Low power mode, LP=0 Normal)
wim	36:9f5f86dfd44a	182
wim	36:9f5f86dfd44a	183	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	41:111ca62e8a59	184	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0073)
wim	36:9f5f86dfd44a	185	break;
wim	36:9f5f86dfd44a	186
wim	36:9f5f86dfd44a	187	// case LCD12x3D: // Special mode for KS0073, KS0078 and PCF21XX
wim	36:9f5f86dfd44a	188	// case LCD12x3D1: // Special mode for KS0073, KS0078 and PCF21XX
wim	36:9f5f86dfd44a	189	case LCD12x4D: // Special mode for KS0073, KS0078 and PCF21XX
wim	36:9f5f86dfd44a	190	// case LCD16x3D: // Special mode for KS0073, KS0078
wim	41:111ca62e8a59	191	// case LCD16x3D1: // Special mode for KS0073, KS0078
wim	36:9f5f86dfd44a	192	// case LCD16x4D: // Special mode for KS0073, KS0078
wim	36:9f5f86dfd44a	193	case LCD20x4D: // Special mode for KS0073, KS0078
wim	41:111ca62e8a59	194	_function = dl \| 0x02; // Set function, 0 0 1 DL, N, RE(0), DH, REV
wim	41:111ca62e8a59	195	// Note: 4 bit mode is NOT ignored for native SPI !
wim	41:111ca62e8a59	196	// DL=1 (8 bits bus), DL=0 (4 bits bus)
wim	41:111ca62e8a59	197	// N=0 (1-line mode), N=1 (2-line mode), dont care for 4 line mode
wim	41:111ca62e8a59	198	// RE=0 (Dis. Extended Regs, special mode for KS0073)
wim	41:111ca62e8a59	199	// DH=1 (Disp shift enable, special mode for KS0073)
wim	41:111ca62e8a59	200	// REV=0 (Reverse normal, special mode for KS0073)
wim	36:9f5f86dfd44a	201
wim	41:111ca62e8a59	202	_function_1 = dl \| 0x04; // Set function, 0 0 1 DL, N, RE(1), BE, LP (Ext Regs)
wim	41:111ca62e8a59	203	// Note: 4 bit mode is NOT ignored for native SPI !
wim	41:111ca62e8a59	204	// DL=1 (8 bits bus), DL=0 (4 bits bus)
wim	41:111ca62e8a59	205	// N=0 (1-line mode), N=1 (2-line mode), dont care for 4 line mode
wim	41:111ca62e8a59	206	// RE=1 (Ena Extended Regs, special mode for KS0073)
wim	41:111ca62e8a59	207	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0073)
wim	41:111ca62e8a59	208	// LP=0 (LP=1 Low power mode, LP=0 Normal)
wim	36:9f5f86dfd44a	209
wim	36:9f5f86dfd44a	210	_function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	41:111ca62e8a59	211	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0073)
wim	36:9f5f86dfd44a	212	break;
wim	36:9f5f86dfd44a	213
wim	41:111ca62e8a59	214	// case LCD6x2:
wim	41:111ca62e8a59	215	case LCD8x2:
wim	41:111ca62e8a59	216	case LCD16x2:
wim	41:111ca62e8a59	217	// case LCD16x1C:
wim	41:111ca62e8a59	218	case LCD20x2:
wim	41:111ca62e8a59	219	case LCD24x2:
wim	41:111ca62e8a59	220	case LCD32x2:
wim	41:111ca62e8a59	221	// All other LCD types are initialised as 2 Line displays
wim	41:111ca62e8a59	222	_function = dl \| 0x0A; // Set function, 0 0 1 DL, N, RE(0), DH, REV
wim	41:111ca62e8a59	223	// Note: 4 bit mode is NOT ignored for native SPI !
wim	41:111ca62e8a59	224	// DL=1 (8 bits bus), DL=0 (4 bits bus)
wim	41:111ca62e8a59	225	// N=1 (2-line mode), N=0 (1-line mode)
wim	41:111ca62e8a59	226	// RE=0 (Dis. Extended Regs, special mode for KS0073)
wim	41:111ca62e8a59	227	// DH=1 (Disp shift enable, special mode for KS0073)
wim	41:111ca62e8a59	228	// REV=0 (Reverse normal, special mode for KS0073)
wim	36:9f5f86dfd44a	229
wim	41:111ca62e8a59	230	_function_1 = dl \| 0x0C; // Set function, 0 0 1 DL, N, RE(1), BE, LP (Ext Regs)
wim	41:111ca62e8a59	231	// Note: 4 bit mode is NOT ignored for native SPI !
wim	41:111ca62e8a59	232	// DL=1 (8 bits bus), DL=0 (4 bits bus)
wim	41:111ca62e8a59	233	// N=1 (2 line mode), N=0 (1-line mode)
wim	41:111ca62e8a59	234	// RE=1 (Ena Extended Regs, special mode for KS0073)
wim	41:111ca62e8a59	235	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0073)
wim	41:111ca62e8a59	236	// LP=0 (LP=1 Low power mode, LP=0 Normal)
wim	36:9f5f86dfd44a	237
wim	36:9f5f86dfd44a	238	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	36:9f5f86dfd44a	239	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0073)
wim	36:9f5f86dfd44a	240	break;
wim	41:111ca62e8a59	241
wim	41:111ca62e8a59	242	default:
wim	41:111ca62e8a59	243	error("Error: LCD Controller type does not support this Display type\n\r");
wim	41:111ca62e8a59	244	break;
wim	36:9f5f86dfd44a	245	} // switch type
wim	36:9f5f86dfd44a	246
wim	36:9f5f86dfd44a	247	// init special features
wim	36:9f5f86dfd44a	248	_writeCommand(0x20 \| _function_1);// Function set 001 DL N RE(1) BE LP (Ext Regs)
wim	36:9f5f86dfd44a	249	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	36:9f5f86dfd44a	250	// N=0 (1 line mode), N=1 (2 line mode)
wim	36:9f5f86dfd44a	251	// RE=1 (Ena Extended Regs, special mode for KS0073)
wim	36:9f5f86dfd44a	252	// BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for KS0073)
wim	36:9f5f86dfd44a	253	// LP=0 (LP=1 Low power mode, LP=0 Normal)
wim	36:9f5f86dfd44a	254
wim	36:9f5f86dfd44a	255	_writeCommand(0x08 \| _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	36:9f5f86dfd44a	256	// FW=0 (5-dot font, special mode for KS0073)
wim	36:9f5f86dfd44a	257	// BW=0 (Cur BW invert disable, special mode for KS0073)
wim	36:9f5f86dfd44a	258	// NW=0 (1,2 Line), NW=1 (4 line, special mode for KS0073)
wim	36:9f5f86dfd44a	259
wim	36:9f5f86dfd44a	260	_writeCommand(0x10); // Scroll/Shift set 0001 DS/HS4 DS/HS3 DS/HS2 DS/HS1 (Ext Regs)
wim	36:9f5f86dfd44a	261	// Dotscroll/Display shift enable (Special mode for KS0073)
wim	36:9f5f86dfd44a	262
wim	36:9f5f86dfd44a	263	_writeCommand(0x80); // Scroll Quantity set 1 0 SQ5 SQ4 SQ3 SQ2 SQ1 SQ0 (Ext Regs)
wim	36:9f5f86dfd44a	264	// Scroll quantity (Special mode for KS0073)
wim	36:9f5f86dfd44a	265
wim	36:9f5f86dfd44a	266	_writeCommand(0x20 \| _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	36:9f5f86dfd44a	267	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	36:9f5f86dfd44a	268	// N=0 (1 line mode), N=1 (2 line mode)
wim	36:9f5f86dfd44a	269	// RE=0 (Dis. Extended Regs, special mode for KS0073)
wim	36:9f5f86dfd44a	270	// DH=1 (Disp shift enable/disable, special mode for KS0073)
wim	36:9f5f86dfd44a	271	// REV=0 (Reverse/Normal, special mode for KS0073)
wim	36:9f5f86dfd44a	272	break; // case KS0073 Controller
wim	36:9f5f86dfd44a	273
wim	36:9f5f86dfd44a	274
wim	29:a3663151aa65	275	case KS0078:
wim	29:a3663151aa65	276	// Initialise Display configuration
wim	29:a3663151aa65	277	switch (_type) {
wim	29:a3663151aa65	278	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	279	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	280	// case LCD12x1:
wim	29:a3663151aa65	281	case LCD16x1:
wim	30:033048611c01	282	// case LCD20x1:
wim	29:a3663151aa65	283	case LCD24x1:
wim	41:111ca62e8a59	284	_function = dl \| 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	285	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	286	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	287	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	288	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	289	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	290
wim	41:111ca62e8a59	291	_function_1 = dl \| 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	292	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	293	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	294	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	295	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	296	// 0
wim	30:033048611c01	297
wim	32:59c4b8f648d4	298	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	299	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	29:a3663151aa65	300	break;
wim	29:a3663151aa65	301
wim	36:9f5f86dfd44a	302	// case LCD12x3D: // Special mode for KS0073, KS0078 and PCF21XX
wim	36:9f5f86dfd44a	303	// case LCD12x3D1: // Special mode for KS0073, KS0078 and PCF21XX
wim	36:9f5f86dfd44a	304	// case LCD12x4D: // Special mode for KS0073, KS0078 and PCF21XX
wim	36:9f5f86dfd44a	305	// case LCD16x3D: // Special mode for KS0073, KS0078
wim	36:9f5f86dfd44a	306	// case LCD16x4D: // Special mode for KS0073, KS0078
wim	36:9f5f86dfd44a	307	// case LCD20x4D: // Special mode for KS0073, KS0078
wim	30:033048611c01	308	// case LCD24x3D: // Special mode for KS0078
wim	30:033048611c01	309	// case LCD24x3D1: // Special mode for KS0078
wim	30:033048611c01	310	case LCD24x4D: // Special mode for KS0078
wim	41:111ca62e8a59	311	_function = dl \| 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	312	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	313	// N=0 (dont care for 4 line mode)
wim	32:59c4b8f648d4	314	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	315	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	316	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	317
wim	41:111ca62e8a59	318	_function_1 = dl \| 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	319	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	320	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	321	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	322	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	323	// 0
wim	29:a3663151aa65	324
wim	32:59c4b8f648d4	325	_function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	326	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	30:033048611c01	327	break;
wim	33:900a94bc7585	328
wim	41:111ca62e8a59	329	// case LCD6x2:
wim	41:111ca62e8a59	330	case LCD8x2:
wim	41:111ca62e8a59	331	case LCD16x2:
wim	41:111ca62e8a59	332	// case LCD16x1C:
wim	41:111ca62e8a59	333	case LCD20x2:
wim	41:111ca62e8a59	334	case LCD24x2:
wim	41:111ca62e8a59	335	case LCD32x2:
wim	41:111ca62e8a59	336	case LCD40x2:
wim	30:033048611c01	337	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	41:111ca62e8a59	338	_function = dl \| 0x0A; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	339	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	340	// N=1 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	341	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	342	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	343	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	344
wim	41:111ca62e8a59	345	_function_1 = dl \| 0x0C; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	346	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	347	// N=1 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	348	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	349	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	350	// 0
wim	30:033048611c01	351
wim	32:59c4b8f648d4	352	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	353	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	29:a3663151aa65	354	break;
wim	41:111ca62e8a59	355
wim	41:111ca62e8a59	356	default:
wim	41:111ca62e8a59	357	error("Error: LCD Controller type does not support this Display type\n\r");
wim	41:111ca62e8a59	358	break;
wim	29:a3663151aa65	359	} // switch type
wim	29:a3663151aa65	360
wim	32:59c4b8f648d4	361	// init special features
wim	32:59c4b8f648d4	362	_writeCommand(0x20 \| _function_1);// Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	363	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	32:59c4b8f648d4	364	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	365	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	366	// BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	367	// 0
wim	32:59c4b8f648d4	368
wim	32:59c4b8f648d4	369	_writeCommand(0x08 \| _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	370	// FW=0 (5-dot font, special mode for KS0078)
wim	32:59c4b8f648d4	371	// BW=0 (Cur BW invert disable, special mode for KS0078)
wim	32:59c4b8f648d4	372	// NW=0 (1,2 Line), NW=1 (4 line, special mode for KS0078)
wim	32:59c4b8f648d4	373
wim	32:59c4b8f648d4	374	_writeCommand(0x10); // Scroll/Shift set 0001 DS/HS4 DS/HS3 DS/HS2 DS/HS1 (Ext Regs)
wim	32:59c4b8f648d4	375	// Dotscroll/Display shift enable (Special mode for KS0078)
wim	32:59c4b8f648d4	376
wim	32:59c4b8f648d4	377	_writeCommand(0x80); // Scroll Quantity set 1 0 SQ5 SQ4 SQ3 SQ2 SQ1 SQ0 (Ext Regs)
wim	32:59c4b8f648d4	378	// Scroll quantity (Special mode for KS0078)
wim	32:59c4b8f648d4	379
wim	32:59c4b8f648d4	380	_writeCommand(0x20 \| _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	381	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	32:59c4b8f648d4	382	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	383	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	384	// DH=1 (Disp shift enable/disable, special mode for KS0078)
wim	32:59c4b8f648d4	385	// REV=0 (Reverse/Normal, special mode for KS0078)
wim	29:a3663151aa65	386	break; // case KS0078 Controller
wim	29:a3663151aa65	387
wim	26:bd897a001012	388	case ST7032_3V3:
wim	26:bd897a001012	389	// ST7032 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	41:111ca62e8a59	390	// Note: very similar to SPLC792A
wim	26:bd897a001012	391	case ST7032_5V:
wim	32:59c4b8f648d4	392	// ST7032 controller: Disable Voltage booster for VLCD. VDD=5V
wim	41:111ca62e8a59	393
wim	29:a3663151aa65	394	// Initialise Display configuration
wim	29:a3663151aa65	395	switch (_type) {
wim	29:a3663151aa65	396	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	397	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	398	// case LCD12x1:
wim	29:a3663151aa65	399	case LCD16x1:
wim	30:033048611c01	400	// case LCD20x1:
wim	32:59c4b8f648d4	401	case LCD24x1:
wim	32:59c4b8f648d4	402	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=0 (1-line display mode), F=0 (5*7dot), 0, IS
wim	32:59c4b8f648d4	403	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	404	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	405	break;
wim	28:30fa94f7341c	406
wim	32:59c4b8f648d4	407	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	408	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	409	case LCD12x4D: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	410	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	411	case LCD24x4D: // Special mode for KS0078
wim	32:59c4b8f648d4	412	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	413	break;
wim	29:a3663151aa65	414
wim	32:59c4b8f648d4	415	default:
wim	32:59c4b8f648d4	416	// All other LCD types are initialised as 2 Line displays
wim	32:59c4b8f648d4	417	_function = 0x08; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=1 (2-line display mode), F=0 (5*7dot), 0, IS
wim	32:59c4b8f648d4	418	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	419	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	420	break;
wim	32:59c4b8f648d4	421	} // switch type
wim	32:59c4b8f648d4	422
wim	32:59c4b8f648d4	423	// init special features
wim	33:900a94bc7585	424	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
wim	33:900a94bc7585	425
wim	33:900a94bc7585	426	_writeCommand(0x1C); // Internal OSC frequency adjustment Framefreq=183HZ, Bias will be 1/4 (Instr Set=1)
wim	41:111ca62e8a59	427	// Note: Bias and Osc register not available on SPLC792A
wim	32:59c4b8f648d4	428
wim	32:59c4b8f648d4	429	_contrast = LCD_ST7032_CONTRAST;
wim	32:59c4b8f648d4	430	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast Low bits, 0 1 1 1 C3 C2 C1 C0 (IS=1)
wim	32:59c4b8f648d4	431
wim	32:59c4b8f648d4	432
wim	32:59c4b8f648d4	433	if (_ctrl == ST7032_3V3) {
wim	41:111ca62e8a59	434	// _icon_power = 0x04; // Icon display off (Bit3=0), Booster circuit is turned on (Bit2=1) (IS=1)
wim	41:111ca62e8a59	435	_icon_power = 0x0C; // Icon display on (Bit3=1), Booster circuit is turned on (Bit2=1) (IS=1)
wim	41:111ca62e8a59	436	// Note: Booster circuit always on for SPLC792A, Bit2 is dont care
wim	32:59c4b8f648d4	437	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	438	}
wim	32:59c4b8f648d4	439	else {
wim	36:9f5f86dfd44a	440	// _icon_power = 0x00; // Icon display off, Booster circuit is turned off (IS=1)
wim	36:9f5f86dfd44a	441	_icon_power = 0x08; // Icon display on, Booster circuit is turned off (IS=1)
wim	32:59c4b8f648d4	442	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	443	}
wim	32:59c4b8f648d4	444	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Icon, Booster and Contrast High bits, 0 1 0 1 Ion Bon C5 C4 (IS=1)
wim	32:59c4b8f648d4	445	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	446
wim	32:59c4b8f648d4	447	_writeCommand(0x68 \| (LCD_ST7032_RAB & 0x07)); // Voltage follower, 0 1 1 0 FOn=1, Ampl ratio Rab2=1, Rab1=0, Rab0=0 (IS=1)
wim	32:59c4b8f648d4	448	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	449
wim	32:59c4b8f648d4	450	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	451
wim	32:59c4b8f648d4	452	break; // case ST7032_3V3 Controller
wim	32:59c4b8f648d4	453	// case ST7032_5V Controller
wim	32:59c4b8f648d4	454
wim	32:59c4b8f648d4	455	case ST7036_3V3:
wim	32:59c4b8f648d4	456	// ST7036 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	32:59c4b8f648d4	457	// Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
wim	32:59c4b8f648d4	458	case ST7036_5V:
wim	32:59c4b8f648d4	459	// ST7036 controller: Disable Voltage booster for VLCD. VDD=5V
wim	32:59c4b8f648d4	460	// Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
wim	32:59c4b8f648d4	461
wim	32:59c4b8f648d4	462	// Initialise Display configuration
wim	32:59c4b8f648d4	463	switch (_type) {
wim	32:59c4b8f648d4	464	case LCD8x1: //8x1 is a regular 1 line display
wim	32:59c4b8f648d4	465	case LCD8x2B: //8x2D is a special case of 16x1
wim	32:59c4b8f648d4	466	// case LCD12x1:
wim	32:59c4b8f648d4	467	case LCD16x1:
wim	32:59c4b8f648d4	468	case LCD24x1:
wim	32:59c4b8f648d4	469	_function = 0x00; // Set function, 0 0 1 DL=0 (4-bit Databus), N=0 (1 Line), DH=0 (5x7font), IS2, IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	470	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	471	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	472
wim	32:59c4b8f648d4	473	_bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
wim	32:59c4b8f648d4	474	break;
wim	32:59c4b8f648d4	475
wim	32:59c4b8f648d4	476	// case LCD12x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	477	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	478	_function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	479	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	480	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	481
wim	32:59c4b8f648d4	482	_bias_lines = 0x05; // Bias: 1/5, 3-Lines LCD
wim	32:59c4b8f648d4	483	break;
wim	32:59c4b8f648d4	484
wim	32:59c4b8f648d4	485	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	486	// case LCD16x3D1: // Special mode for SSD1803
wim	30:033048611c01	487	case LCD12x4D: // Special mode for PCF2116
wim	30:033048611c01	488	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	489	error("Error: LCD Controller type does not support this Display type\n\r");
wim	29:a3663151aa65	490	break;
wim	28:30fa94f7341c	491
wim	29:a3663151aa65	492	default:
wim	32:59c4b8f648d4	493	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	494	_function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	495	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	496	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	497
wim	32:59c4b8f648d4	498	_bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
wim	32:59c4b8f648d4	499	break;
wim	32:59c4b8f648d4	500	} // switch type
wim	32:59c4b8f648d4	501
wim	29:a3663151aa65	502
wim	32:59c4b8f648d4	503	// init special features
wim	33:900a94bc7585	504	_writeCommand(0x20 \| _function \| 0x01); // Set function, IS2,IS1 = 01 (Select Instr Set = 1)
wim	32:59c4b8f648d4	505	_writeCommand(0x10 \| _bias_lines); // Set Bias and 1,2 or 3 lines (Instr Set 1)
wim	29:a3663151aa65	506
wim	32:59c4b8f648d4	507	_contrast = LCD_ST7036_CONTRAST;
wim	32:59c4b8f648d4	508	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast, 0 1 1 1 C3 C2 C1 C0 (Instr Set 1)
wim	32:59c4b8f648d4	509
wim	32:59c4b8f648d4	510	if (_ctrl == ST7036_3V3) {
wim	36:9f5f86dfd44a	511	_icon_power = 0x0C; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=1 Bon=1 C5 C4 (Instr Set 1)
wim	36:9f5f86dfd44a	512	// _icon_power = 0x04; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=1 C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	513	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	514	}
wim	32:59c4b8f648d4	515	else {
wim	36:9f5f86dfd44a	516	_icon_power = 0x08; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=1 Bon=0 C5 C4 (Instr Set 1)
wim	36:9f5f86dfd44a	517	// _icon_power = 0x00; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=0 C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	518	}
wim	29:a3663151aa65	519
wim	32:59c4b8f648d4	520	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Contrast C5, C4 (Instr Set 1)
wim	32:59c4b8f648d4	521	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	522
wim	32:59c4b8f648d4	523	_writeCommand(0x68 \| (LCD_ST7036_RAB & 0x07)); // Voltagefollower On = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 0 1 (Instr Set 1)
wim	32:59c4b8f648d4	524	wait_ms(10); // Wait 10ms to ensure powered up
wim	28:30fa94f7341c	525
wim	32:59c4b8f648d4	526	_writeCommand(0x20 \| _function); // Set function, IS2,IS1 = 00 (Select Instruction Set = 0)
wim	32:59c4b8f648d4	527
wim	32:59c4b8f648d4	528	break; // case ST7036_3V3 Controller
wim	32:59c4b8f648d4	529	// case ST7036_5V Controller
wim	36:9f5f86dfd44a	530
wim	36:9f5f86dfd44a	531	case ST7070:
wim	36:9f5f86dfd44a	532	// Initialise Display configuration
wim	36:9f5f86dfd44a	533	switch (_type) {
wim	36:9f5f86dfd44a	534	case LCD8x1: //8x1 is a regular 1 line display
wim	36:9f5f86dfd44a	535	case LCD8x2B: //8x2D is a special case of 16x1
wim	36:9f5f86dfd44a	536	// case LCD12x1:
wim	36:9f5f86dfd44a	537	case LCD16x1:
wim	36:9f5f86dfd44a	538	case LCD24x1:
wim	36:9f5f86dfd44a	539	_function = dl \| 0x00; // Set function, 0 0 1 DL=0 (4-bit Databus), N=0 (1 Line), EXT=0, x, x
wim	36:9f5f86dfd44a	540	// Note: 4 bit mode is NOT ignored for native SPI !
wim	36:9f5f86dfd44a	541	// Saved to allow switch between Instruction sets at later time
wim	36:9f5f86dfd44a	542	break;
wim	36:9f5f86dfd44a	543
wim	36:9f5f86dfd44a	544	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	36:9f5f86dfd44a	545	// case LCD16x3D1: // Special mode for SSD1803
wim	36:9f5f86dfd44a	546	case LCD12x4D: // Special mode for PCF2116
wim	36:9f5f86dfd44a	547	case LCD24x4D: // Special mode for KS0078
wim	36:9f5f86dfd44a	548	// case LCD12x3G: // Special mode for ST7036
wim	36:9f5f86dfd44a	549	case LCD16x3G: // Special mode for ST7036
wim	36:9f5f86dfd44a	550	error("Error: LCD Controller type does not support this Display type\n\r");
wim	36:9f5f86dfd44a	551	break;
wim	36:9f5f86dfd44a	552
wim	36:9f5f86dfd44a	553	default:
wim	36:9f5f86dfd44a	554	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	36:9f5f86dfd44a	555	_function = dl \| 0x08; // Set function, 0 0 1 DL, N=1 (2 Line), EXT=0, x, x
wim	36:9f5f86dfd44a	556	// Note: 4 bit mode is NOT ignored for native SPI !
wim	36:9f5f86dfd44a	557	// Saved to allow switch between Instruction sets at later time
wim	36:9f5f86dfd44a	558	break;
wim	36:9f5f86dfd44a	559	} // switch type
wim	36:9f5f86dfd44a	560
wim	36:9f5f86dfd44a	561	// _writeCommand(0x00); // NOP, make sure to sync SPI
wim	36:9f5f86dfd44a	562
wim	36:9f5f86dfd44a	563	// init special features
wim	36:9f5f86dfd44a	564	_writeCommand(0x20 \| _function \| 0x04); // Set function, 0 0 1 DL N EXT=1 x x (Select Instr Set = 1)
wim	36:9f5f86dfd44a	565
wim	36:9f5f86dfd44a	566	_writeCommand(0x04 \| 0x00); // Set Bias resistors 0 0 0 0 0 1 Rb1,Rb0= 0 0 (Extern Res) (Instr Set 1)
wim	36:9f5f86dfd44a	567
wim	36:9f5f86dfd44a	568	_writeCommand(0x40 \| 0x00); // COM/SEG directions 0 1 0 0 C1, C2, S1, S2 (Instr Set 1)
wim	36:9f5f86dfd44a	569	// C1=1: Com1-8 -> Com8-1; C2=1: Com9-16 -> Com16-9
wim	36:9f5f86dfd44a	570	// S1=1: Seg1-40 -> Seg40-1; S2=1: Seg41-80 -> Seg80-41
wim	36:9f5f86dfd44a	571
wim	36:9f5f86dfd44a	572	_writeCommand(0x20 \| _function); // Set function, EXT=0 (Select Instr Set = 0)
wim	36:9f5f86dfd44a	573
wim	36:9f5f86dfd44a	574	break; // case ST7070 Controller
wim	36:9f5f86dfd44a	575
wim	32:59c4b8f648d4	576	case SSD1803_3V3:
wim	32:59c4b8f648d4	577	// SSD1803 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	32:59c4b8f648d4	578	// Note: supports 1,2, 3 or 4 lines
wim	32:59c4b8f648d4	579	// case SSD1803_5V:
wim	32:59c4b8f648d4	580	// SSD1803 controller: No Voltage booster for VLCD. VDD=5V
wim	32:59c4b8f648d4	581
wim	29:a3663151aa65	582	// Initialise Display configuration
wim	29:a3663151aa65	583	switch (_type) {
wim	29:a3663151aa65	584	case LCD8x1: //8x1 is a regular 1 line display
wim	30:033048611c01	585	case LCD8x2B: //8x2D is a special case of 16x1
wim	29:a3663151aa65	586	// case LCD12x1:
wim	29:a3663151aa65	587	case LCD16x1:
wim	29:a3663151aa65	588	case LCD24x1:
wim	32:59c4b8f648d4	589	_function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	590	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	591	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	592	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	593	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	594	// DH=0 Double Height disable
wim	32:59c4b8f648d4	595	// IS=0
wim	32:59c4b8f648d4	596
wim	33:900a94bc7585	597	_function_1 = 0x02; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	598	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	599	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	600	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	601	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	602	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	603	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	604
wim	32:59c4b8f648d4	605	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	606	// NW=0 1-Line LCD (N=0)
wim	29:a3663151aa65	607	break;
wim	32:59c4b8f648d4	608
wim	33:900a94bc7585	609	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	610	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	611	case LCD16x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	612	// case LCD16x3D1: // Special mode for SSD1803
wim	32:59c4b8f648d4	613	// case LCD20x3D: // Special mode for SSD1803
wim	32:59c4b8f648d4	614	_function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	615	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	616	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	617	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	618	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	619	// DH=0 Double Height disable
wim	32:59c4b8f648d4	620	// IS=0
wim	32:59c4b8f648d4	621
wim	33:900a94bc7585	622	_function_1 = 0x02; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	623	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	624	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	625	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	626	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	627	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	628	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	629
wim	32:59c4b8f648d4	630	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	631	// NW=1 3-Line LCD (N=0)
wim	29:a3663151aa65	632	break;
wim	30:033048611c01	633
wim	39:e9c2319de9c5	634	// case LCD10x2D: // Special mode for SSD1803, 4-line mode but switch to double height font
wim	39:e9c2319de9c5	635	case LCD10x4D: // Special mode for SSD1803
wim	32:59c4b8f648d4	636	case LCD20x4D: // Special mode for SSD1803
wim	32:59c4b8f648d4	637	_function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	638	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	639	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	640	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	641	// N=1 4 Line
wim	32:59c4b8f648d4	642	// DH=0 Double Height disable
wim	32:59c4b8f648d4	643	// IS=0
wim	32:59c4b8f648d4	644
wim	33:900a94bc7585	645	_function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	646	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	647	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	648	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	649	// N=1 4 Line
wim	32:59c4b8f648d4	650	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	651	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	652
wim	32:59c4b8f648d4	653	_lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	654	// NW=1 4-Line LCD (N=1)
wim	32:59c4b8f648d4	655	break;
wim	32:59c4b8f648d4	656
wim	33:900a94bc7585	657	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	658	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	659	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	660	break;
wim	30:033048611c01	661
wim	29:a3663151aa65	662	default:
wim	30:033048611c01	663	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	664	_function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	665	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	666	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	667	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	668	// N=1 2 line / 4 Line
wim	32:59c4b8f648d4	669	// DH=0 Double Height disable
wim	36:9f5f86dfd44a	670	// RE=0
wim	32:59c4b8f648d4	671	// IS=0
wim	29:a3663151aa65	672
wim	33:900a94bc7585	673	_function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	674	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	675	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	676	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	677	// N=1 2 line / 4 Line
wim	32:59c4b8f648d4	678	// BE=0 Blink Enable off, special feature of SSD1803
wim	36:9f5f86dfd44a	679	// RE=1
wim	32:59c4b8f648d4	680	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	681
wim	32:59c4b8f648d4	682	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	683	// NW=0 2-Line LCD (N=1)
wim	32:59c4b8f648d4	684	break;
wim	32:59c4b8f648d4	685	} // switch type
wim	32:59c4b8f648d4	686
wim	32:59c4b8f648d4	687
wim	32:59c4b8f648d4	688	// init special features
wim	33:900a94bc7585	689	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	690	// Select Extended Instruction Set
wim	33:900a94bc7585	691
wim	33:900a94bc7585	692	_writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	693	// _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	694	wait_ms(5); // Wait to ensure completion or SSD1803 fails to set Top/Bottom after reset..
wim	33:900a94bc7585	695
wim	33:900a94bc7585	696	_writeCommand(0x08 \| _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
wim	32:59c4b8f648d4	697
wim	32:59c4b8f648d4	698	_writeCommand(0x10); // Double Height and Bias, 0 0 0 1 UD2=0, UD1=0, BS1=0 Bias 1/5, DH=0 (Ext Instr Set)
wim	32:59c4b8f648d4	699
wim	32:59c4b8f648d4	700	// _writeCommand(0x76); // Set TC Control, 0 1 1 1 0 1 1 0 (Ext Instr Set)
wim	32:59c4b8f648d4	701	// _writeData(0x02); // Set TC data, 0 0 0 0 0 TC2,TC1,TC0 = 0 1 0 (Ext Instr Set)
wim	32:59c4b8f648d4	702
wim	32:59c4b8f648d4	703	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH RE(0) IS=1 Select Instruction Set 1
wim	32:59c4b8f648d4	704	// Select Std Instr set, Select IS=1
wim	32:59c4b8f648d4	705
wim	32:59c4b8f648d4	706	_contrast = LCD_SSD1_CONTRAST;
wim	32:59c4b8f648d4	707	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast 0 1 1 1 C3, C2, C1, C0 (Instr Set 1)
wim	32:59c4b8f648d4	708
wim	36:9f5f86dfd44a	709	// _icon_power = 0x04; // Icon off, Booster on (Instr Set 1)
wim	36:9f5f86dfd44a	710	_icon_power = 0x0C; // Icon on, Booster on (Instr Set 1)
wim	32:59c4b8f648d4	711	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	712	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Power, Icon and Contrast, 0 1 0 1 Ion Bon C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	713	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	714
wim	32:59c4b8f648d4	715	_writeCommand(0x68 \| (LCD_SSD1_RAB & 0x07)); // Set Voltagefollower 0 1 1 0 Don = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 1 0 (Instr Set 1)
wim	32:59c4b8f648d4	716	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	717
wim	33:900a94bc7585	718	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	719	// Select Extended Instruction Set 1
wim	32:59c4b8f648d4	720	_writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set 1)
wim	32:59c4b8f648d4	721
wim	32:59c4b8f648d4	722
wim	32:59c4b8f648d4	723	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	32:59c4b8f648d4	724	// Select Std Instr set, Select IS=0
wim	32:59c4b8f648d4	725
wim	32:59c4b8f648d4	726	break; // case SSD1803 Controller
wim	32:59c4b8f648d4	727
wim	29:a3663151aa65	728
wim	32:59c4b8f648d4	729	// Note1: The PCF21XX family of controllers has several types that dont have an onboard voltage generator for V-LCD.
wim	32:59c4b8f648d4	730	// You must supply this LCD voltage externally and not try to enable VGen.
wim	32:59c4b8f648d4	731	// Note2: The early versions of PCF2116 controllers (eg PCF2116C) can not generate sufficiently negative voltage for the LCD at a VDD of 3V3.
wim	32:59c4b8f648d4	732	// You must supply this voltage externally and not enable VGen or you must use a higher VDD (e.g. 5V) and enable VGen.
wim	32:59c4b8f648d4	733	// More recent versions of the controller (eg PCF2116K) have an improved VGen that will work with 3V3.
wim	32:59c4b8f648d4	734	// Note3: See datasheet, PCF2116 and other types provide a V0 pin to control the LCD contrast voltage that is provided by VGen. This pins allows
wim	32:59c4b8f648d4	735	// contrast control similar to that of pin 3 on the standard 14pin LCD module connector.
wim	32:59c4b8f648d4	736	// You can disable VGen by connecting Vo to VDD. VLCD will then be used directly as LCD voltage.
wim	32:59c4b8f648d4	737	// Note4: PCF2113 and PCF2119 are different wrt to VLCD generator! There is no V0 pin. The contrast voltage is software controlled by setting the VA and VB registers.
wim	32:59c4b8f648d4	738	// Vgen is automatically switched off when the contrast voltage VA or VB is set to 0x00. Note that certain limits apply to allowed values for VA and VB.
wim	32:59c4b8f648d4	739	// Note5: See datasheet, members of the PCF21XX family support different numbers of rows/columns. Not all can support 3 or 4 rows.
wim	32:59c4b8f648d4	740	// Note6: See datasheet, the PCF21XX-C and PCF21XX-K use a non-standard character set. This may result is strange looking text when not corrected..
wim	32:59c4b8f648d4	741
wim	34:e5a0dcb43ecc	742	case PCF2103_3V3:
wim	34:e5a0dcb43ecc	743	// PCF2103 controller: No Voltage generator for VLCD, VDD=3V3..5V, VLCD input controls contrast voltage.
wim	34:e5a0dcb43ecc	744	// Initialise Display configuration
wim	34:e5a0dcb43ecc	745	switch (_type) {
wim	34:e5a0dcb43ecc	746	case LCD24x1:
wim	34:e5a0dcb43ecc	747	_function = 0x00; //FUNCTION SET 0 0 1 DL=0 4-bit, 0, M=0 1-line/24 chars display mode, 0, H=0
wim	34:e5a0dcb43ecc	748	//Note: 4 bit mode is ignored for I2C mode
wim	34:e5a0dcb43ecc	749	break;
wim	34:e5a0dcb43ecc	750
wim	34:e5a0dcb43ecc	751	// case LCD12x1D: //Special mode for PCF21XX, Only top line used
wim	34:e5a0dcb43ecc	752	case LCD12x2:
wim	34:e5a0dcb43ecc	753	_function = 0x04; //FUNCTION SET 0 0 1 DL=0 4-bit, 0, M=1 2-line/12 chars display mode, 0, H=0
wim	34:e5a0dcb43ecc	754	//Note: 4 bit mode is ignored for I2C mode
wim	34:e5a0dcb43ecc	755	break;
wim	34:e5a0dcb43ecc	756
wim	34:e5a0dcb43ecc	757	default:
wim	34:e5a0dcb43ecc	758	error("Error: LCD Controller type does not support this Display type\n\r");
wim	34:e5a0dcb43ecc	759	break;
wim	34:e5a0dcb43ecc	760
wim	34:e5a0dcb43ecc	761	} // switch type
wim	34:e5a0dcb43ecc	762
wim	34:e5a0dcb43ecc	763	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	34:e5a0dcb43ecc	764	wait_ms(10); // Wait 10ms to ensure powered up
wim	34:e5a0dcb43ecc	765
wim	34:e5a0dcb43ecc	766	// Note: Display from GA628 shows 12 chars. This is actually the right half of a 24x1 display. The commons have been connected in reverse order.
wim	34:e5a0dcb43ecc	767	_writeCommand(0x05); // Display Conf Set 0000 0, 1, P=0, Q=1 (Instr. Set 1)
wim	34:e5a0dcb43ecc	768
wim	34:e5a0dcb43ecc	769	_writeCommand(0x02); // Screen Config 0000 001, L=0 (Instr. Set 1)
wim	34:e5a0dcb43ecc	770	_writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=0 (no Icon blink), 0 (Instr. Set 1)
wim	34:e5a0dcb43ecc	771
wim	34:e5a0dcb43ecc	772	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	34:e5a0dcb43ecc	773
wim	36:9f5f86dfd44a	774	#if(0)
wim	34:e5a0dcb43ecc	775	// Select CG RAM
wim	34:e5a0dcb43ecc	776	_writeCommand(0x40); //Set CG-RAM address, 8 sequential locations needed per UDC
wim	34:e5a0dcb43ecc	777	// Store UDC/Icon pattern:
wim	34:e5a0dcb43ecc	778	// 3 x 8 rows x 5 bits = 120 bits for Normal pattern (UDC 0..2) and
wim	34:e5a0dcb43ecc	779	// 3 x 8 rows x 5 bits = 120 bits for Blink pattern (UDC 4..6)
wim	34:e5a0dcb43ecc	780	for (int i=0; i<(8 * 8); i++) {
wim	34:e5a0dcb43ecc	781	// _writeData(0x1F); // All On
wim	34:e5a0dcb43ecc	782	_writeData(0x00); // All Off
wim	34:e5a0dcb43ecc	783	}
wim	36:9f5f86dfd44a	784	#endif
wim	34:e5a0dcb43ecc	785	break; // case PCF2103_3V3 Controller
wim	34:e5a0dcb43ecc	786
wim	30:033048611c01	787	case PCF2113_3V3:
wim	32:59c4b8f648d4	788	// PCF2113 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	29:a3663151aa65	789	// Initialise Display configuration
wim	29:a3663151aa65	790	switch (_type) {
wim	29:a3663151aa65	791	// case LCD12x1:
wim	33:900a94bc7585	792	// _function = 0x02; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=0 1-line/12 chars display mode, SL=1, IS=0
wim	32:59c4b8f648d4	793	// Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	794	case LCD24x1:
wim	33:900a94bc7585	795	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=0 1-line/24 chars display mode, SL=0, IS=0
wim	32:59c4b8f648d4	796	// Note: 4 bit mode is ignored for I2C mode
wim	30:033048611c01	797	break;
wim	30:033048611c01	798
wim	30:033048611c01	799	case LCD12x2:
wim	33:900a94bc7585	800	_function = 0x04; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=1 2-line/12 chars display mode, SL=0, IS=0
wim	30:033048611c01	801	break;
wim	30:033048611c01	802
wim	30:033048611c01	803	default:
wim	30:033048611c01	804	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	805	break;
wim	30:033048611c01	806
wim	30:033048611c01	807	} // switch type
wim	30:033048611c01	808
wim	32:59c4b8f648d4	809	// Init special features
wim	33:900a94bc7585	810	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	33:900a94bc7585	811
wim	33:900a94bc7585	812	_writeCommand(0x04); // Display Conf Set 0000 0, 1, P=0, Q=0 (Instr. Set 1)
wim	33:900a94bc7585	813	_writeCommand(0x10); // Temp Compensation Set 0001 0, 0, TC1=0, TC2=0 (Instr. Set 1)
wim	33:900a94bc7585	814	// _writeCommand(0x42); // HV GEN 0100 S1=1, S2=0 (2x multiplier) (Instr. Set 1)
wim	33:900a94bc7585	815	_writeCommand(0x40 \| (LCD_PCF2_S12 & 0x03)); // HV Gen 0100 S1=1, S2=0 (2x multiplier) (Instr. Set 1)
wim	32:59c4b8f648d4	816
wim	32:59c4b8f648d4	817	_contrast = LCD_PCF2_CONTRAST;
wim	33:900a94bc7585	818	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) 1, V=0, VA=contrast
wim	33:900a94bc7585	819	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) 1, V=1, VB=contrast
wim	32:59c4b8f648d4	820	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	821
wim	33:900a94bc7585	822	_writeCommand(0x02); // Screen Config 0000 001, L=0 (Instr. Set 1)
wim	33:900a94bc7585	823	_writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=0 (no icon blink) DM=0 (no direct mode) (Instr. Set 1)
wim	33:900a94bc7585	824
wim	33:900a94bc7585	825	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	32:59c4b8f648d4	826
wim	30:033048611c01	827	break; // case PCF2113_3V3 Controller
wim	30:033048611c01	828
wim	30:033048611c01	829
wim	32:59c4b8f648d4	830	// case PCF2113_5V:
wim	32:59c4b8f648d4	831	// PCF2113 controller: No Voltage generator for VLCD. VDD=5V. Contrast voltage controlled by VA or VB.
wim	32:59c4b8f648d4	832	//@TODO
wim	32:59c4b8f648d4	833
wim	30:033048611c01	834
wim	30:033048611c01	835	case PCF2116_3V3:
wim	32:59c4b8f648d4	836	// PCF2116 controller: Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
wim	30:033048611c01	837	// Initialise Display configuration
wim	30:033048611c01	838	switch (_type) {
wim	30:033048611c01	839	// case LCD12x1:
wim	30:033048611c01	840	// case LCD12x2:
wim	30:033048611c01	841	case LCD24x1:
wim	34:e5a0dcb43ecc	842	_writeCommand(0x22); //FUNCTION SET 0 0 1 DL=0 4-bit, N=0/M=0 1-line/24 chars display mode, G=1 Vgen on, 0
wim	29:a3663151aa65	843	//Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	844	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	845	break;
wim	29:a3663151aa65	846
wim	32:59c4b8f648d4	847	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	848	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	849	case LCD12x4D: // Special mode for PCF21XX:
wim	34:e5a0dcb43ecc	850	_writeCommand(0x2E); //FUNCTION SET 0 0 1 DL=0 4-bit, N=1/M=1 4-line/12 chars display mode, G=1 VGen on, 0
wim	29:a3663151aa65	851	//Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	852	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	853	break;
wim	30:033048611c01	854
wim	30:033048611c01	855	case LCD24x2:
wim	34:e5a0dcb43ecc	856	_writeCommand(0x2A); //FUNCTION SET 0 0 1 DL=0 4-bit, N=1/M=0 2-line/24 chars display mode, G=1 VGen on, 0
wim	29:a3663151aa65	857	//Note: 4 bit mode is ignored for I2C mode
wim	30:033048611c01	858	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	859	break;
wim	32:59c4b8f648d4	860
wim	30:033048611c01	861	default:
wim	30:033048611c01	862	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	863	break;
wim	30:033048611c01	864
wim	29:a3663151aa65	865	} // switch type
wim	29:a3663151aa65	866
wim	30:033048611c01	867	break; // case PCF2116_3V3 Controller
wim	29:a3663151aa65	868
wim	32:59c4b8f648d4	869
wim	32:59c4b8f648d4	870	//Experimental for cellphone 3-line display, SA=0x74, No Ack supported, Character set C or K, DL = 8 bit, N=0,M=1 (reserved mode !!), external VLCD -2V5
wim	32:59c4b8f648d4	871	//@TODO
wim	32:59c4b8f648d4	872	case PCF2116_5V:
wim	32:59c4b8f648d4	873	// PCF2116 controller: No Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
wim	32:59c4b8f648d4	874	// Initialise Display configuration
wim	32:59c4b8f648d4	875	switch (_type) {
wim	32:59c4b8f648d4	876	// case LCD12x1:
wim	32:59c4b8f648d4	877	// case LCD12x2:
wim	32:59c4b8f648d4	878	// case LCD24x1:
wim	34:e5a0dcb43ecc	879	// _writeCommand(0x20); //FUNCTION SET 0 0 1 DL=0 4-bit, N=0/M=0 1-line/24 chars display mode, G=0 no Vgen, 0
wim	32:59c4b8f648d4	880	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	881	// wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	882	// break;
wim	32:59c4b8f648d4	883
wim	32:59c4b8f648d4	884	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	885	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	886	case LCD12x4D: // Special mode for PCF21XX:
wim	32:59c4b8f648d4	887	// _writeCommand(0x34); //FUNCTION SET 8 bit, N=0/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	888	// _writeCommand(0x24); //FUNCTION SET 4 bit, N=0/M=1 4-line/12 chars display mode OK
wim	34:e5a0dcb43ecc	889	_writeCommand(0x2C); //FUNCTION SET 0 0 1 DL=0 4-bit, N=1/M=1 4-line/12 chars display mode, G=0 no Vgen, 0 OK
wim	32:59c4b8f648d4	890	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	891	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	892	break;
wim	32:59c4b8f648d4	893
wim	32:59c4b8f648d4	894	// case LCD24x2:
wim	32:59c4b8f648d4	895	// _writeCommand(0x28); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode
wim	32:59c4b8f648d4	896	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	897	// wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	898	// break;
wim	32:59c4b8f648d4	899
wim	32:59c4b8f648d4	900	default:
wim	32:59c4b8f648d4	901	error("Error: LCD Controller type does not support this Display type\n\r");
wim	32:59c4b8f648d4	902	break;
wim	32:59c4b8f648d4	903
wim	32:59c4b8f648d4	904	} // switch type
wim	32:59c4b8f648d4	905
wim	32:59c4b8f648d4	906	break; // case PCF2116_5V Controller
wim	32:59c4b8f648d4	907
wim	32:59c4b8f648d4	908	case PCF2119_3V3:
wim	39:e9c2319de9c5	909	case PCF2119R_3V3:
wim	32:59c4b8f648d4	910	// PCF2119 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	32:59c4b8f648d4	911	// Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
wim	32:59c4b8f648d4	912	// Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
wim	32:59c4b8f648d4	913
wim	32:59c4b8f648d4	914	//POR or Hardware Reset should be applied
wim	32:59c4b8f648d4	915	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	916
wim	32:59c4b8f648d4	917	// Initialise Display configuration
wim	32:59c4b8f648d4	918	switch (_type) {
wim	32:59c4b8f648d4	919	case LCD8x1:
wim	32:59c4b8f648d4	920	// case LCD12x1:
wim	32:59c4b8f648d4	921	case LCD16x1:
wim	34:e5a0dcb43ecc	922	_function = 0x02; // FUNCTION SET 0 0 1 DL=0 4-bit, 0 , M=0 1-line/16 chars display mode, SL=1
wim	32:59c4b8f648d4	923	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	924	break;
wim	32:59c4b8f648d4	925
wim	32:59c4b8f648d4	926	case LCD24x1:
wim	32:59c4b8f648d4	927	// case LCD32x1:
wim	34:e5a0dcb43ecc	928	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 4-bit, 0 , M=0 1-line/32 chars display mode, SL=0
wim	32:59c4b8f648d4	929	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	930	break;
wim	32:59c4b8f648d4	931
wim	32:59c4b8f648d4	932	case LCD8x2:
wim	32:59c4b8f648d4	933	// case LCD12x2:
wim	32:59c4b8f648d4	934	case LCD16x2:
wim	34:e5a0dcb43ecc	935	_function = 0x04; // FUNCTION SET 0 0 1 DL=0 4-bit, 0, M=1 2-line/16 chars display mode, SL=0
wim	32:59c4b8f648d4	936	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	937	break;
wim	32:59c4b8f648d4	938
wim	32:59c4b8f648d4	939	default:
wim	32:59c4b8f648d4	940	error("Error: LCD Controller type does not support this Display type\n\r");
wim	32:59c4b8f648d4	941	break;
wim	32:59c4b8f648d4	942
wim	32:59c4b8f648d4	943	} // switch type
wim	32:59c4b8f648d4	944
wim	32:59c4b8f648d4	945	// Init special features
wim	32:59c4b8f648d4	946	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	947
wim	39:e9c2319de9c5	948	// _writeCommand(0x04); // DISP CONF SET (Instr. Set 1) 0000, 0, 1, P=0, Q=0 (IC at Bottom)
wim	39:e9c2319de9c5	949	// _writeCommand(0x05); // Display Conf Set 0000, 0, 1, P=0, Q=1
wim	39:e9c2319de9c5	950	// _writeCommand(0x06); // Display Conf Set 0000, 0, 1, P=1, Q=0
wim	39:e9c2319de9c5	951	_writeCommand(0x07); // Display Conf Set 0000, 0, 1, P=1, Q=1 (IC at Top)
wim	39:e9c2319de9c5	952
wim	32:59c4b8f648d4	953	_writeCommand(0x10); // TEMP CTRL SET (Instr. Set 1) 0001, 0, 0, TC1=0, TC2=0
wim	32:59c4b8f648d4	954	// _writeCommand(0x42); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	955	_writeCommand(0x40 \| (LCD_PCF2_S12 & 0x03)); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	956
wim	32:59c4b8f648d4	957	_contrast = LCD_PCF2_CONTRAST;
wim	32:59c4b8f648d4	958	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	959	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	960	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	961
wim	32:59c4b8f648d4	962	_writeCommand(0x02); // SCRN CONF (Instr. Set 1) L=0
wim	32:59c4b8f648d4	963	_writeCommand(0x08); // ICON CONF (Instr. Set 1) IM=0 (Char mode) IB=0 (no icon blink) DM=0 (no direct mode)
wim	32:59c4b8f648d4	964
wim	32:59c4b8f648d4	965	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	966
wim	32:59c4b8f648d4	967	break; // case PCF2119_3V3 Controller
wim	32:59c4b8f648d4	968
wim	32:59c4b8f648d4	969	// case PCF2119_5V:
wim	32:59c4b8f648d4	970	// PCF2119 controller: No Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	32:59c4b8f648d4	971	// Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
wim	32:59c4b8f648d4	972	// Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
wim	30:033048611c01	973	//@TODO
wim	29:a3663151aa65	974
wim	19:c747b9e2e7b8	975	case WS0010:
wim	19:c747b9e2e7b8	976	// WS0010 OLED controller: Initialise DC/DC Voltage converter for LEDs
wim	30:033048611c01	977	// Note1: Identical to RS0010
wim	30:033048611c01	978	// Note2: supports 1 or 2 lines (and 16x100 graphics)
wim	30:033048611c01	979	// supports 4 fonts (English/Japanese (default), Western European-I, English/Russian, Western European-II)
wim	19:c747b9e2e7b8	980	// Cursor/Disp shift set 0001 SC RL 0 0
wim	19:c747b9e2e7b8	981	//
wim	30:033048611c01	982	// Mode and Power set 0001 GC PWR 1 1
wim	19:c747b9e2e7b8	983	// GC = 0 (Graph Mode=1, Char Mode=0)
wim	30:033048611c01	984	// PWR = 1 (DC/DC On/Off)
wim	30:033048611c01	985
wim	30:033048611c01	986	//@Todo: This may be needed to enable a warm reboot
wim	32:59c4b8f648d4	987	//_writeCommand(0x13); // Char mode, DC/DC off
wim	30:033048611c01	988	//wait_ms(10); // Wait 10ms to ensure powered down
wim	32:59c4b8f648d4	989	_writeCommand(0x17); // Char mode, DC/DC on
wim	30:033048611c01	990	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	991
wim	29:a3663151aa65	992	// Initialise Display configuration
wim	29:a3663151aa65	993	switch (_type) {
wim	29:a3663151aa65	994	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	995	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	996	// case LCD12x1:
wim	29:a3663151aa65	997	case LCD16x1:
wim	30:033048611c01	998	case LCD24x1:
wim	30:033048611c01	999	_writeCommand(0x20); // Function set 001 DL N F FT1 FT0
wim	30:033048611c01	1000	// DL=0 (4 bits bus)
wim	30:033048611c01	1001	// N=0 (1 line)
wim	30:033048611c01	1002	// F=0 (5x7 dots font)
wim	30:033048611c01	1003	// FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
wim	30:033048611c01	1004	break;
wim	30:033048611c01	1005
wim	32:59c4b8f648d4	1006	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	1007	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	1008	case LCD12x4D: // Special mode for PCF21XX:
wim	33:900a94bc7585	1009	case LCD16x3G: // Special mode for ST7036
wim	30:033048611c01	1010	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	1011	error("Error: LCD Controller type does not support this Display type\n\r");
wim	29:a3663151aa65	1012	break;
wim	29:a3663151aa65	1013
wim	29:a3663151aa65	1014	default:
wim	30:033048611c01	1015	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	30:033048611c01	1016	_writeCommand(0x28); // Function set 001 DL N F FT1 FT0
wim	30:033048611c01	1017	// DL=0 (4 bits bus)
wim	30:033048611c01	1018	// N=1 (2 lines)
wim	30:033048611c01	1019	// F=0 (5x7 dots font)
wim	30:033048611c01	1020	// FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
wim	30:033048611c01	1021
wim	29:a3663151aa65	1022	break;
wim	29:a3663151aa65	1023	} // switch type
wim	29:a3663151aa65	1024
wim	32:59c4b8f648d4	1025	break; // case WS0010 Controller
wim	33:900a94bc7585	1026
wim	33:900a94bc7585	1027
wim	33:900a94bc7585	1028	case US2066_3V3:
wim	33:900a94bc7585	1029	// US2066/SSD1311 OLED controller, Initialise for VDD=3V3
wim	33:900a94bc7585	1030	// Note: supports 1,2, 3 or 4 lines
wim	33:900a94bc7585	1031	// case USS2066_5V:
wim	33:900a94bc7585	1032	// US2066 controller, VDD=5V
wim	33:900a94bc7585	1033
wim	33:900a94bc7585	1034	// Initialise Display configuration
wim	33:900a94bc7585	1035	switch (_type) {
wim	33:900a94bc7585	1036	case LCD8x1: //8x1 is a regular 1 line display
wim	33:900a94bc7585	1037	case LCD8x2B: //8x2D is a special case of 16x1
wim	33:900a94bc7585	1038	// case LCD12x1:
wim	33:900a94bc7585	1039	case LCD16x1:
wim	33:900a94bc7585	1040	// case LCD20x1:
wim	33:900a94bc7585	1041	_function = 0x00; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	1042	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1043	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1044	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	1045	// DH=0 Double Height disable
wim	33:900a94bc7585	1046	// IS=0
wim	33:900a94bc7585	1047
wim	33:900a94bc7585	1048	_function_1 = 0x02; // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1049	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1050	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1051	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	1052	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1053	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1054
wim	33:900a94bc7585	1055	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	1056	// NW=0 1-Line LCD (N=0)
wim	33:900a94bc7585	1057	break;
wim	33:900a94bc7585	1058
wim	33:900a94bc7585	1059	case LCD16x1C:
wim	33:900a94bc7585	1060	case LCD8x2:
wim	33:900a94bc7585	1061	case LCD16x2:
wim	33:900a94bc7585	1062	case LCD20x2:
wim	33:900a94bc7585	1063	_function = 0x08; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	1064	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1065	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1066	// N=1 2 line / 4 Line
wim	33:900a94bc7585	1067	// DH=0 Double Height disable
wim	33:900a94bc7585	1068	// IS=0
wim	33:900a94bc7585	1069
wim	33:900a94bc7585	1070	_function_1 = 0x0A; // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1071	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1072	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1073	// N=1 2 line / 4 Line
wim	33:900a94bc7585	1074	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1075	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1076
wim	33:900a94bc7585	1077	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	1078	// NW=0 2-Line LCD (N=1)
wim	33:900a94bc7585	1079	break;
wim	33:900a94bc7585	1080
wim	33:900a94bc7585	1081	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	1082	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	1083	case LCD16x3D: // Special mode for KS0078, SSD1803 and US2066
wim	33:900a94bc7585	1084	// case LCD16x3D1: // Special mode for SSD1803, US2066
wim	33:900a94bc7585	1085	// case LCD20x3D: // Special mode for SSD1803, US2066
wim	33:900a94bc7585	1086	_function = 0x00; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	1087	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1088	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1089	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	1090	// DH=0 Double Height disable
wim	33:900a94bc7585	1091	// IS=0
wim	33:900a94bc7585	1092
wim	33:900a94bc7585	1093	_function_1 = 0x02; // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1094	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1095	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1096	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	1097	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1098	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1099
wim	33:900a94bc7585	1100	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	1101	// NW=1 3-Line LCD (N=0)
wim	33:900a94bc7585	1102	break;
wim	33:900a94bc7585	1103
wim	33:900a94bc7585	1104	case LCD20x4D: // Special mode for SSD1803, US2066
wim	33:900a94bc7585	1105	_function = 0x08; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	1106	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1107	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1108	// N=1 2 line / 4 Line
wim	33:900a94bc7585	1109	// DH=0 Double Height disable
wim	33:900a94bc7585	1110	// IS=0
wim	33:900a94bc7585	1111
wim	33:900a94bc7585	1112	_function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	1113	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	1114	// DL=0 bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	1115	// N=1 2 line / 4 Line
wim	33:900a94bc7585	1116	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1117	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	1118
wim	33:900a94bc7585	1119	_lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	1120	// NW=1 4-Line LCD (N=1)
wim	33:900a94bc7585	1121	break;
wim	33:900a94bc7585	1122
wim	33:900a94bc7585	1123	// case LCD24x1:
wim	33:900a94bc7585	1124	// case LCD16x3G: // Special mode for ST7036
wim	33:900a94bc7585	1125	// case LCD24x4D: // Special mode for KS0078
wim	33:900a94bc7585	1126	default:
wim	33:900a94bc7585	1127	error("Error: LCD Controller type does not support this Display type\n\r");
wim	33:900a94bc7585	1128	break;
wim	33:900a94bc7585	1129
wim	33:900a94bc7585	1130	} // switch type
wim	33:900a94bc7585	1131
wim	34:e5a0dcb43ecc	1132	_writeCommand(0x00); // NOP, make sure to sync SPI
wim	33:900a94bc7585	1133
wim	33:900a94bc7585	1134	// init special features
wim	33:900a94bc7585	1135	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1136	// Select Extended Instruction Set
wim	33:900a94bc7585	1137
wim	33:900a94bc7585	1138	_writeCommand(0x71); // Function Select A: 0 1 1 1 0 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	1139	_writeData(0x00); // Disable Internal VDD
wim	33:900a94bc7585	1140
wim	33:900a94bc7585	1141	_writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	1142
wim	33:900a94bc7585	1143	_writeCommand(0xD5); // Display Clock Divide Ratio: 1 1 0 1 0 1 0 1 (Ext Instr Set, OLED Instr Set)
wim	33:900a94bc7585	1144	_writeCommand(0x70); // Display Clock Divide Ratio value: 0 1 1 1 0 0 0 0 (Ext Instr Set, OLED Instr Set)
wim	33:900a94bc7585	1145
wim	33:900a94bc7585	1146	_writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
wim	33:900a94bc7585	1147
wim	33:900a94bc7585	1148	// _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	1149	_writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	1150
wim	33:900a94bc7585	1151	_writeCommand(0x08 \| _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
wim	33:900a94bc7585	1152
wim	34:e5a0dcb43ecc	1153	// _writeCommand(0x1C); // Double Height, 0 0 0 1 UD2=1, UD1=1, X, DH'=0 (Ext Instr Set)
wim	33:900a94bc7585	1154	// // Default
wim	33:900a94bc7585	1155
wim	33:900a94bc7585	1156	_writeCommand(0x72); // Function Select B: 0 1 1 1 0 0 1 0 (Ext Instr Set)
wim	33:900a94bc7585	1157	_writeData(0x01); // Select ROM A (CGRAM 8, CGROM 248)
wim	33:900a94bc7585	1158
wim	33:900a94bc7585	1159	_writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	1160
wim	33:900a94bc7585	1161	_writeCommand(0xDA); // Set Segm Pins Config: 1 1 0 1 1 0 1 0 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1162	_writeCommand(0x10); // Set Segm Pins Config value: Altern Odd/Even, Disable Remap (Ext Instr Set, OLED)
wim	33:900a94bc7585	1163
wim	33:900a94bc7585	1164	_writeCommand(0xDC); // Function Select C: 1 1 0 1 1 1 0 0 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1165	// _writeCommand(0x00); // Set internal VSL, GPIO pin HiZ (always read low)
wim	33:900a94bc7585	1166	_writeCommand(0x80); // Set external VSL, GPIO pin HiZ (always read low)
wim	33:900a94bc7585	1167
wim	33:900a94bc7585	1168	_contrast = LCD_US20_CONTRAST;
wim	33:900a94bc7585	1169	_writeCommand(0x81); // Set Contrast Control: 1 0 0 0 0 0 0 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1170	_writeCommand((_contrast << 2) \| 0x03); // Set Contrast Value: 8 bits, use 6 bits for compatibility
wim	33:900a94bc7585	1171
wim	33:900a94bc7585	1172	_writeCommand(0xD9); // Set Phase Length: 1 1 0 1 1 0 0 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1173	_writeCommand(0xF1); // Set Phase Length Value:
wim	33:900a94bc7585	1174
wim	33:900a94bc7585	1175	_writeCommand(0xDB); // Set VCOMH Deselect Lvl: 1 1 0 1 1 0 1 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1176	_writeCommand(0x30); // Set VCOMH Deselect Value: 0.83 x VCC
wim	33:900a94bc7585	1177
wim	33:900a94bc7585	1178	wait_ms(10); // Wait 10ms to ensure powered up
wim	33:900a94bc7585	1179
wim	33:900a94bc7585	1180	//Test Fade/Blinking. Hard Blink on/off, No fade in/out ??
wim	33:900a94bc7585	1181	// _writeCommand(0x23); // Set (Ext Instr Set, OLED)
wim	33:900a94bc7585	1182	// _writeCommand(0x3F); // Set interval 128 frames
wim	33:900a94bc7585	1183	//End Test Blinking
wim	33:900a94bc7585	1184
wim	33:900a94bc7585	1185	_writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
wim	33:900a94bc7585	1186
wim	33:900a94bc7585	1187	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 X N DH RE(0) IS=1 Select Instruction Set 1
wim	33:900a94bc7585	1188	// Select Std Instr set, Select IS=1
wim	33:900a94bc7585	1189
wim	33:900a94bc7585	1190	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1191	// Select Ext Instr Set, IS=1
wim	33:900a94bc7585	1192	_writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set, IS=1)
wim	33:900a94bc7585	1193
wim	33:900a94bc7585	1194	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	1195	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1196	break; // case US2066/SSD1311 Controller
wim	33:900a94bc7585	1197
wim	34:e5a0dcb43ecc	1198	//not yet tested on hardware
wim	34:e5a0dcb43ecc	1199	case PT6314 :
wim	34:e5a0dcb43ecc	1200	// Initialise Display configuration
wim	34:e5a0dcb43ecc	1201	switch (_type) {
wim	34:e5a0dcb43ecc	1202	case LCD8x1: //8x1 is a regular 1 line display
wim	34:e5a0dcb43ecc	1203	case LCD8x2B: //8x2B is a special case of 16x1
wim	34:e5a0dcb43ecc	1204	// case LCD12x1:
wim	34:e5a0dcb43ecc	1205	case LCD16x1:
wim	34:e5a0dcb43ecc	1206	case LCD20x1:
wim	34:e5a0dcb43ecc	1207	case LCD24x1:
wim	34:e5a0dcb43ecc	1208	_function = 0x00; // Function set 001 DL N X BR1 BR0
wim	34:e5a0dcb43ecc	1209	// DL=0 (4 bits bus)
wim	34:e5a0dcb43ecc	1210	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	34:e5a0dcb43ecc	1211	// N=0 (1 line)
wim	34:e5a0dcb43ecc	1212	// X
wim	34:e5a0dcb43ecc	1213	// BR1=0 (2 significant bits for brightness
wim	34:e5a0dcb43ecc	1214	// BR0=0
wim	34:e5a0dcb43ecc	1215	// 0x0 = 100%
wim	34:e5a0dcb43ecc	1216	// 0x1 = 75%
wim	34:e5a0dcb43ecc	1217	// 0x2 = 50%
wim	34:e5a0dcb43ecc	1218	// 0x3 = 25%
wim	34:e5a0dcb43ecc	1219
wim	34:e5a0dcb43ecc	1220	break;
wim	34:e5a0dcb43ecc	1221
wim	34:e5a0dcb43ecc	1222	// All other valid LCD types are initialised as 2 Line displays
wim	34:e5a0dcb43ecc	1223	case LCD8x2:
wim	34:e5a0dcb43ecc	1224	case LCD16x2:
wim	34:e5a0dcb43ecc	1225	case LCD20x2:
wim	34:e5a0dcb43ecc	1226	case LCD24x2:
wim	34:e5a0dcb43ecc	1227	_function = 0x08; // Function set 001 DL N X BR1 BR2
wim	34:e5a0dcb43ecc	1228	// DL=0 (4 bits bus)
wim	34:e5a0dcb43ecc	1229	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	34:e5a0dcb43ecc	1230	// N=1 (2 lines)
wim	34:e5a0dcb43ecc	1231	// X
wim	34:e5a0dcb43ecc	1232	// BR1=0 (2 significant bits for brightness
wim	34:e5a0dcb43ecc	1233	// BR0=0
wim	34:e5a0dcb43ecc	1234	break;
wim	34:e5a0dcb43ecc	1235
wim	34:e5a0dcb43ecc	1236	default:
wim	34:e5a0dcb43ecc	1237	error("Error: LCD Controller type does not support this Display type\n\r");
wim	34:e5a0dcb43ecc	1238	break;
wim	34:e5a0dcb43ecc	1239	} // switch type
wim	34:e5a0dcb43ecc	1240
wim	34:e5a0dcb43ecc	1241	_contrast = LCD_PT63_CONTRAST;
wim	34:e5a0dcb43ecc	1242	_writeCommand(0x20 \| _function \| ((~_contrast) >> 4)); // Invert and shift to use 2 MSBs
wim	34:e5a0dcb43ecc	1243	break; // case PT6314 Controller (VFD)
wim	39:e9c2319de9c5	1244
wim	39:e9c2319de9c5	1245
wim	39:e9c2319de9c5	1246	case HD66712:
wim	39:e9c2319de9c5	1247	// Initialise Display configuration
wim	39:e9c2319de9c5	1248	switch (_type) {
wim	39:e9c2319de9c5	1249	case LCD8x1: //8x1 is a regular 1 line display
wim	39:e9c2319de9c5	1250	case LCD12x1:
wim	39:e9c2319de9c5	1251	case LCD16x1:
wim	39:e9c2319de9c5	1252	case LCD20x1:
wim	39:e9c2319de9c5	1253	case LCD24x1:
wim	39:e9c2319de9c5	1254	// case LCD32x1: // EXT pin is High, extension driver needed
wim	40:d3496c3ea301	1255	_function = 0x02; // Function set 001 DL N RE(0) - - (Std Regs)
wim	39:e9c2319de9c5	1256	// DL=0 (4 bits bus)
wim	39:e9c2319de9c5	1257	// N=0 (1-line mode, N=1 2-line mode)
wim	40:d3496c3ea301	1258	// RE=0 (Dis. Extended Regs, special mode for HD66712)
wim	40:d3496c3ea301	1259	//
wim	39:e9c2319de9c5	1260
wim	39:e9c2319de9c5	1261	_function_1 = 0x04; // Function set 001 DL N RE(1) BE LP (Ext Regs)
wim	39:e9c2319de9c5	1262	// DL=0 (4 bits bus)
wim	39:e9c2319de9c5	1263	// N=0 (1-line mode, N=1 2-line mode)
wim	40:d3496c3ea301	1264	// RE=1 (Ena Extended Regs; special mode for HD66712)
wim	40:d3496c3ea301	1265	// BE=0 (Blink Enable, CG/SEG RAM; special mode for HD66712)
wim	40:d3496c3ea301	1266	// LP=0 (LP=1 Low power mode, LP=0 Normal; special mode for HD66712)
wim	39:e9c2319de9c5	1267
wim	39:e9c2319de9c5	1268	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	40:d3496c3ea301	1269	// NW=0 (1,2 line), NW=1 (4 Line, special mode for HD66712)
wim	39:e9c2319de9c5	1270	break;
wim	39:e9c2319de9c5	1271
wim	40:d3496c3ea301	1272	// case LCD12x3D: // Special mode for KS0073, KS0078, PCF21XX and HD66712
wim	40:d3496c3ea301	1273	// case LCD12x3D1: // Special mode for KS0073, KS0078, PCF21XX and HD66712
wim	39:e9c2319de9c5	1274	case LCD12x4D: // Special mode for KS0073, KS0078, PCF21XX and HD66712
wim	40:d3496c3ea301	1275	// case LCD16x3D: // Special mode for KS0073, KS0078 and HD66712
wim	40:d3496c3ea301	1276	// case LCD16x4D: // Special mode for KS0073, KS0078 and HD66712
wim	39:e9c2319de9c5	1277	case LCD20x4D: // Special mode for KS0073, KS0078 and HD66712
wim	40:d3496c3ea301	1278	_function = 0x02; // Function set 001 DL N RE(0) - - (Std Regs)
wim	39:e9c2319de9c5	1279	// DL=0 (4 bits bus)
wim	40:d3496c3ea301	1280	// N=0 (1-line mode, N=1 2-line mode)
wim	40:d3496c3ea301	1281	// RE=0 (Dis. Extended Regs, special mode for HD66712)
wim	40:d3496c3ea301	1282	//
wim	39:e9c2319de9c5	1283
wim	39:e9c2319de9c5	1284	_function_1 = 0x04; // Function set 001 DL N RE(1) BE LP (Ext Regs)
wim	39:e9c2319de9c5	1285	// DL=0 (4 bits bus)
wim	40:d3496c3ea301	1286	// N=0 (1-line mode, N=1 2-line mode)
wim	40:d3496c3ea301	1287	// RE=1 (Ena Extended Regs; special mode for HD66712)
wim	40:d3496c3ea301	1288	// BE=0 (Blink Enable, CG/SEG RAM; special mode for HD66712)
wim	40:d3496c3ea301	1289	// LP=0 (LP=1 Low power mode, LP=0 Normal; special mode for HD66712)
wim	39:e9c2319de9c5	1290
wim	39:e9c2319de9c5	1291	_function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	40:d3496c3ea301	1292	// NW=0 (1,2 line), NW=1 (4 Line, special mode for HD66712)
wim	39:e9c2319de9c5	1293	break;
wim	39:e9c2319de9c5	1294
wim	39:e9c2319de9c5	1295	case LCD16x3G: // Special mode for ST7036
wim	39:e9c2319de9c5	1296	// case LCD24x3D: // Special mode for KS0078
wim	39:e9c2319de9c5	1297	// case LCD24x3D1: // Special mode for KS0078
wim	39:e9c2319de9c5	1298	case LCD24x4D: // Special mode for KS0078
wim	39:e9c2319de9c5	1299	error("Error: LCD Controller type does not support this Display type\n\r");
wim	39:e9c2319de9c5	1300	break;
wim	39:e9c2319de9c5	1301
wim	39:e9c2319de9c5	1302	default:
wim	39:e9c2319de9c5	1303	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	40:d3496c3ea301	1304	_function = 0x0A; // Function set 001 DL N RE(0) - - (Std Regs)
wim	39:e9c2319de9c5	1305	// DL=0 (4 bits bus)
wim	39:e9c2319de9c5	1306	// N=1 (2-line mode), N=0 (1-line mode)
wim	40:d3496c3ea301	1307	// RE=0 (Dis. Extended Regs, special mode for HD66712)
wim	39:e9c2319de9c5	1308
wim	39:e9c2319de9c5	1309	_function_1 = 0x0C; // Function set 001 DL N RE(1) BE LP (Ext Regs)
wim	39:e9c2319de9c5	1310	// DL=0 (4 bits bus)
wim	39:e9c2319de9c5	1311	// N=1 (2 line mode), N=0 (1-line mode)
wim	40:d3496c3ea301	1312	// RE=1 (Ena Extended Regs, special mode for HD66712)
wim	40:d3496c3ea301	1313	// BE=0 (Blink Enable, CG/SEG RAM, special mode for HD66712)
wim	40:d3496c3ea301	1314	// LP=0 (LP=1 Low power mode, LP=0 Normal)
wim	39:e9c2319de9c5	1315
wim	39:e9c2319de9c5	1316	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	40:d3496c3ea301	1317	// NW=0 (1,2 line), NW=1 (4 Line, special mode for HD66712)
wim	39:e9c2319de9c5	1318	break;
wim	39:e9c2319de9c5	1319	} // switch type
wim	39:e9c2319de9c5	1320
wim	39:e9c2319de9c5	1321	// init special features
wim	39:e9c2319de9c5	1322	_writeCommand(0x20 \| _function_1);// Function set 001 DL N RE(1) BE LP (Ext Regs)
wim	39:e9c2319de9c5	1323	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	39:e9c2319de9c5	1324	// N=0 (1 line mode), N=1 (2 line mode)
wim	40:d3496c3ea301	1325	// RE=1 (Ena Extended Regs, special mode for HD66712)
wim	40:d3496c3ea301	1326	// BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for HD66712)
wim	39:e9c2319de9c5	1327	// LP=0 (LP=1 Low power mode, LP=0 Normal)
wim	39:e9c2319de9c5	1328
wim	39:e9c2319de9c5	1329	_writeCommand(0x08 \| _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	40:d3496c3ea301	1330	// FW=0 (5-dot font, special mode for HD66712)
wim	40:d3496c3ea301	1331	// BW=0 (Cur BW invert disable, special mode for HD66712)
wim	40:d3496c3ea301	1332	// NW=0 (1,2 Line), NW=1 (4 line, special mode for HD66712)
wim	40:d3496c3ea301	1333
wim	40:d3496c3ea301	1334	_writeCommand(0x10); // Scroll/Shift set 0001 HS4 HS3 HS2 HS1 (Ext Regs)
wim	40:d3496c3ea301	1335	// Dotscroll/Display shift enable (Special mode for HD66712)
wim	40:d3496c3ea301	1336
wim	40:d3496c3ea301	1337	_writeCommand(0x80); // Scroll Quantity set 1 0 HDS5 HDS4 HDS3 HDS2 HDS1 HDS0 (Ext Regs)
wim	40:d3496c3ea301	1338	// Scroll quantity (Special mode for HD66712)
wim	39:e9c2319de9c5	1339
wim	39:e9c2319de9c5	1340	_writeCommand(0x20 \| _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	39:e9c2319de9c5	1341	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	39:e9c2319de9c5	1342	// N=0 (1 line mode), N=1 (2 line mode)
wim	40:d3496c3ea301	1343	// RE=0 (Dis. Extended Regs, special mode for HD66712)
wim	40:d3496c3ea301	1344	// DH=1 (Disp shift enable/disable, special mode for HD66712)
wim	40:d3496c3ea301	1345	// REV=0 (Reverse/Normal, special mode for HD66712)
wim	39:e9c2319de9c5	1346	break; // case HD66712 Controller
wim	39:e9c2319de9c5	1347
wim	41:111ca62e8a59	1348	case SPLC792A_3V3:
wim	41:111ca62e8a59	1349	// SPLC792A controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	41:111ca62e8a59	1350	// Note very similar to ST7032
wim	41:111ca62e8a59	1351
wim	41:111ca62e8a59	1352	// Initialise Display configuration
wim	41:111ca62e8a59	1353	switch (_type) {
wim	41:111ca62e8a59	1354	case LCD8x1: //8x1 is a regular 1 line display
wim	41:111ca62e8a59	1355	case LCD8x2B: //8x2B is a special case of 16x1
wim	41:111ca62e8a59	1356	// case LCD12x1:
wim	41:111ca62e8a59	1357	case LCD16x1:
wim	41:111ca62e8a59	1358	// case LCD20x1:
wim	41:111ca62e8a59	1359	case LCD24x1:
wim	41:111ca62e8a59	1360	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=0 (1-line display mode), F=0 (5*7dot), 0, IS
wim	41:111ca62e8a59	1361	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	41:111ca62e8a59	1362	// Saved to allow switch between Instruction sets at later time
wim	41:111ca62e8a59	1363	break;
wim	41:111ca62e8a59	1364
wim	41:111ca62e8a59	1365	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	41:111ca62e8a59	1366	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	41:111ca62e8a59	1367	case LCD12x4D: // Special mode for KS0078 and PCF21XX
wim	41:111ca62e8a59	1368	case LCD16x3G: // Special mode for ST7036
wim	41:111ca62e8a59	1369	case LCD24x4D: // Special mode for KS0078
wim	41:111ca62e8a59	1370	error("Error: LCD Controller type does not support this Display type\n\r");
wim	41:111ca62e8a59	1371	break;
wim	41:111ca62e8a59	1372
wim	41:111ca62e8a59	1373	default:
wim	41:111ca62e8a59	1374	// All other LCD types are initialised as 2 Line displays
wim	41:111ca62e8a59	1375	_function = 0x08; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=1 (2-line display mode), F=0 (5*7dot), 0, IS
wim	41:111ca62e8a59	1376	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	41:111ca62e8a59	1377	// Saved to allow switch between Instruction sets at later time
wim	41:111ca62e8a59	1378	break;
wim	41:111ca62e8a59	1379	} // switch type
wim	41:111ca62e8a59	1380
wim	41:111ca62e8a59	1381	// init special features
wim	41:111ca62e8a59	1382	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
wim	41:111ca62e8a59	1383
wim	41:111ca62e8a59	1384	//SPLC792A Does not support Bias and Internal Osc register
wim	41:111ca62e8a59	1385	// _writeCommand(0x1C); // Internal OSC frequency adjustment Framefreq=183HZ, Bias will be 1/4 (Instr Set=1)
wim	41:111ca62e8a59	1386
wim	41:111ca62e8a59	1387	_contrast = LCD_SPLC792A_CONTRAST;
wim	41:111ca62e8a59	1388	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast Low bits, 0 1 1 1 C3 C2 C1 C0 (IS=1)
wim	41:111ca62e8a59	1389
wim	41:111ca62e8a59	1390
wim	41:111ca62e8a59	1391	// _icon_power = 0x04; // Icon display off (Bit3=0), Booster circuit is turned on (Bit2=1) (IS=1)
wim	41:111ca62e8a59	1392	_icon_power = 0x0C; // Icon display on (Bit3=1), Booster circuit is turned on (Bit2=1) (IS=1)
wim	41:111ca62e8a59	1393	// Note: Booster circuit always on for SPLC792A, Bit2 is dont care
wim	41:111ca62e8a59	1394	// Saved to allow contrast change at later time
wim	41:111ca62e8a59	1395
wim	41:111ca62e8a59	1396	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Icon, Booster and Contrast High bits, 0 1 0 1 Ion Bon C5 C4 (IS=1)
wim	41:111ca62e8a59	1397	wait_ms(10); // Wait 10ms to ensure powered up
wim	41:111ca62e8a59	1398
wim	41:111ca62e8a59	1399	_writeCommand(0x68 \| (LCD_SPLC792A_RAB & 0x07)); // Voltage follower, 0 1 1 0 FOn=1, Ampl ratio Rab2=1, Rab1=0, Rab0=0 (IS=1)
wim	41:111ca62e8a59	1400	// Note: Follower circuit always on for SPLC792A, Bit3 is dont care
wim	41:111ca62e8a59	1401	wait_ms(10); // Wait 10ms to ensure powered up
wim	41:111ca62e8a59	1402
wim	41:111ca62e8a59	1403	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	41:111ca62e8a59	1404
wim	41:111ca62e8a59	1405	break; // case SPLC792A_3V3 Controller
wim	41:111ca62e8a59	1406
wim	37:ce348c002929	1407	case ST7066_ACM: // ST7066 4/8 bit, I2C on ACM1602 using a PIC
wim	19:c747b9e2e7b8	1408	default:
wim	32:59c4b8f648d4	1409	// Devices fully compatible to HD44780 that do not use any DC/DC Voltage converters but external VLCD, no icons etc
wim	10:dd9b3a696acd	1410
wim	29:a3663151aa65	1411	// Initialise Display configuration
wim	29:a3663151aa65	1412	switch (_type) {
wim	29:a3663151aa65	1413	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	1414	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	1415	// case LCD12x1:
wim	29:a3663151aa65	1416	case LCD16x1:
wim	30:033048611c01	1417	// case LCD20x1:
wim	29:a3663151aa65	1418	case LCD24x1:
wim	30:033048611c01	1419	// case LCD40x1:
wim	32:59c4b8f648d4	1420	_function = 0x00; // Function set 001 DL N F - -
wim	29:a3663151aa65	1421	// DL=0 (4 bits bus)
wim	29:a3663151aa65	1422	// N=0 (1 line)
wim	29:a3663151aa65	1423	// F=0 (5x7 dots font)
wim	29:a3663151aa65	1424	break;
wim	29:a3663151aa65	1425
wim	32:59c4b8f648d4	1426	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	1427	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	1428	case LCD12x4D: // Special mode for KS0078 and PCF21XX:
wim	33:900a94bc7585	1429	case LCD16x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	1430	// case LCD16x3D1: // Special mode for KS0078
wim	30:033048611c01	1431	// case LCD24x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	1432	// case LCD24x3D1: // Special mode for KS0078
wim	30:033048611c01	1433	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	1434	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	1435	break;
wim	30:033048611c01	1436
wim	30:033048611c01	1437	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	29:a3663151aa65	1438	default:
wim	32:59c4b8f648d4	1439	_function = 0x08; // Function set 001 DL N F - -
wim	29:a3663151aa65	1440	// DL=0 (4 bits bus)
wim	29:a3663151aa65	1441	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	29:a3663151aa65	1442	// N=1 (2 lines)
wim	29:a3663151aa65	1443	// F=0 (5x7 dots font, only option for 2 line display)
wim	32:59c4b8f648d4	1444	// - (Don't care)
wim	29:a3663151aa65	1445	break;
wim	29:a3663151aa65	1446	} // switch type
wim	10:dd9b3a696acd	1447
wim	34:e5a0dcb43ecc	1448	_writeCommand(0x20 \| _function);
wim	29:a3663151aa65	1449	break; // case default Controller
wim	29:a3663151aa65	1450
wim	34:e5a0dcb43ecc	1451	} // switch Controller specific initialisations
wim	10:dd9b3a696acd	1452
wim	30:033048611c01	1453	// Controller general initialisations
wim	39:e9c2319de9c5	1454	// _writeCommand(0x01); // Clear Display and set cursor to 0
wim	32:59c4b8f648d4	1455	// wait_ms(10); // The CLS command takes 1.64 ms.
wim	32:59c4b8f648d4	1456	// // Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	28:30fa94f7341c	1457
wim	39:e9c2319de9c5	1458	_writeCommand(0x02); // Cursor Home, DDRAM Address to Origin
wim	39:e9c2319de9c5	1459	wait_ms(10); // The Return Home command takes 1.64 ms.
wim	39:e9c2319de9c5	1460	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	28:30fa94f7341c	1461
wim	28:30fa94f7341c	1462	_writeCommand(0x06); // Entry Mode 0000 0 1 I/D S
wim	13:24506ba22480	1463	// Cursor Direction and Display Shift
wim	28:30fa94f7341c	1464	// I/D=1 (Cur incr)
wim	28:30fa94f7341c	1465	// S=0 (No display shift)
wim	10:dd9b3a696acd	1466
wim	29:a3663151aa65	1467	_writeCommand(0x14); // Cursor or Display shift 0001 S/C R/L x x
wim	29:a3663151aa65	1468	// S/C=0 Cursor moves
wim	29:a3663151aa65	1469	// R/L=1 Right
wim	29:a3663151aa65	1470	//
wim	29:a3663151aa65	1471
wim	13:24506ba22480	1472	// _writeCommand(0x0C); // Display Ctrl 0000 1 D C B
wim	17:652ab113bc2e	1473	// // Display On, Cursor Off, Blink Off
wim	36:9f5f86dfd44a	1474
wim	39:e9c2319de9c5	1475	// setCursor(CurOff_BlkOff);
wim	39:e9c2319de9c5	1476	setCursor(CurOn_BlkOff);
wim	21:9eb628d9e164	1477	setMode(DispOn);
simon	1:ac48b187213c	1478	}
simon	1:ac48b187213c	1479
wim	8:03116f75b66e	1480
wim	21:9eb628d9e164	1481	/** Clear the screen, Cursor home.
wim	39:e9c2319de9c5	1482	* Note: The whole display is initialised to charcode 0x20, which may not be a 'space' on some controllers with a
wim	39:e9c2319de9c5	1483	* different fontset such as the PCF2116C or PCF2119R. In this case you should fill the display with 'spaces'.
wim	21:9eb628d9e164	1484	*/
wim	21:9eb628d9e164	1485	void TextLCD_Base::cls() {
wim	15:b70ebfffb258	1486
wim	41:111ca62e8a59	1487	#if (LCD_TWO_CTRL == 1)
wim	15:b70ebfffb258	1488	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	1489	if(_type==LCD40x4) {
wim	21:9eb628d9e164	1490	_ctrl_idx=_LCDCtrl_1; // Select 2nd controller
wim	15:b70ebfffb258	1491
wim	15:b70ebfffb258	1492	// Second LCD controller Cursor always Off
wim	21:9eb628d9e164	1493	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	15:b70ebfffb258	1494
wim	15:b70ebfffb258	1495	// Second LCD controller Clearscreen
wim	27:22d5086f6ba6	1496	_writeCommand(0x01); // cls, and set cursor to 0
wim	39:e9c2319de9c5	1497	wait_ms(20); // The CLS command takes 1.64 ms.
wim	29:a3663151aa65	1498	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	15:b70ebfffb258	1499
wim	21:9eb628d9e164	1500	_ctrl_idx=_LCDCtrl_0; // Select primary controller
wim	15:b70ebfffb258	1501	}
wim	41:111ca62e8a59	1502
wim	15:b70ebfffb258	1503
wim	15:b70ebfffb258	1504	// Primary LCD controller Clearscreen
wim	27:22d5086f6ba6	1505	_writeCommand(0x01); // cls, and set cursor to 0
wim	39:e9c2319de9c5	1506	wait_ms(20); // The CLS command takes 1.64 ms.
wim	29:a3663151aa65	1507	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	15:b70ebfffb258	1508
wim	15:b70ebfffb258	1509	// Restore cursormode on primary LCD controller when needed
wim	15:b70ebfffb258	1510	if(_type==LCD40x4) {
wim	17:652ab113bc2e	1511	_setCursorAndDisplayMode(_currentMode,_currentCursor);
wim	15:b70ebfffb258	1512	}
wim	41:111ca62e8a59	1513
wim	41:111ca62e8a59	1514	#else
wim	41:111ca62e8a59	1515	// Support only one LCD controller
wim	41:111ca62e8a59	1516	_writeCommand(0x01); // cls, and set cursor to 0
wim	41:111ca62e8a59	1517	wait_ms(20); // The CLS command takes 1.64 ms.
wim	41:111ca62e8a59	1518	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	41:111ca62e8a59	1519	#endif
wim	15:b70ebfffb258	1520
wim	29:a3663151aa65	1521	setAddress(0, 0); // Reset Cursor location
wim	32:59c4b8f648d4	1522	// Note: This is needed because some displays (eg PCF21XX) don't use line 0 in the '3 Line' mode.
simon	1:ac48b187213c	1523	}
simon	1:ac48b187213c	1524
wim	29:a3663151aa65	1525	/** Locate cursor to a screen column and row
wim	29:a3663151aa65	1526	*
wim	29:a3663151aa65	1527	* @param column The horizontal position from the left, indexed from 0
wim	29:a3663151aa65	1528	* @param row The vertical position from the top, indexed from 0
wim	29:a3663151aa65	1529	*/
wim	21:9eb628d9e164	1530	void TextLCD_Base::locate(int column, int row) {
wim	15:b70ebfffb258	1531
wim	15:b70ebfffb258	1532	// setAddress() does all the heavy lifting:
wim	15:b70ebfffb258	1533	// check column and row sanity,
wim	15:b70ebfffb258	1534	// switch controllers for LCD40x4 if needed
wim	15:b70ebfffb258	1535	// switch cursor for LCD40x4 if needed
wim	15:b70ebfffb258	1536	// set the new memory address to show cursor at correct location
wim	32:59c4b8f648d4	1537	setAddress(column, row);
wim	15:b70ebfffb258	1538	}
wim	30:033048611c01	1539
wim	15:b70ebfffb258	1540
wim	21:9eb628d9e164	1541	/** Write a single character (Stream implementation)
wim	21:9eb628d9e164	1542	*/
wim	21:9eb628d9e164	1543	int TextLCD_Base::_putc(int value) {
wim	15:b70ebfffb258	1544	int addr;
wim	15:b70ebfffb258	1545
wim	15:b70ebfffb258	1546	if (value == '\n') {
wim	15:b70ebfffb258	1547	//No character to write
wim	15:b70ebfffb258	1548
wim	15:b70ebfffb258	1549	//Update Cursor
wim	15:b70ebfffb258	1550	_column = 0;
wim	15:b70ebfffb258	1551	_row++;
wim	15:b70ebfffb258	1552	if (_row >= rows()) {
wim	15:b70ebfffb258	1553	_row = 0;
wim	15:b70ebfffb258	1554	}
wim	15:b70ebfffb258	1555	}
wim	15:b70ebfffb258	1556	else {
wim	37:ce348c002929	1557	//Character to write
wim	41:111ca62e8a59	1558
wim	41:111ca62e8a59	1559	#if (LCD_DEF_FONT == 1) //Default HD44780 font
wim	37:ce348c002929	1560	_writeData(value);
wim	41:111ca62e8a59	1561	#elif (LCD_C_FONT == 1) \|\| (LCD_R_FONT == 1) //PCF21xxC or PCF21xxR font
wim	41:111ca62e8a59	1562	_writeData(ASCII_2_LCD(value));
wim	41:111ca62e8a59	1563	#elif (LCD_UTF8_FONT == 1) // UTF8 2 byte font (eg Cyrillic)
wim	41:111ca62e8a59	1564	// value = UTF_2_LCD(value, utf_seq_rec_first_cyr, utf_seq_recode_cyr, &utf_rnd_recode_cyr[0][0]);
wim	41:111ca62e8a59	1565	value = UTF_2_LCD(value);
wim	41:111ca62e8a59	1566	if (value >= 0) {
wim	41:111ca62e8a59	1567	_writeData(value);
wim	41:111ca62e8a59	1568
wim	41:111ca62e8a59	1569	// Only increment cursor when there is something to write
wim	41:111ca62e8a59	1570	// Continue below to closing bracket...
wim	37:ce348c002929	1571	#else
wim	41:111ca62e8a59	1572	_writeData('?'); //Oops, no font defined
wim	41:111ca62e8a59	1573	#endif
wim	41:111ca62e8a59	1574
wim	15:b70ebfffb258	1575	//Update Cursor
wim	15:b70ebfffb258	1576	_column++;
wim	15:b70ebfffb258	1577	if (_column >= columns()) {
wim	15:b70ebfffb258	1578	_column = 0;
wim	15:b70ebfffb258	1579	_row++;
wim	15:b70ebfffb258	1580	if (_row >= rows()) {
wim	15:b70ebfffb258	1581	_row = 0;
wim	15:b70ebfffb258	1582	}
wim	41:111ca62e8a59	1583	}
wim	41:111ca62e8a59	1584
wim	41:111ca62e8a59	1585	#if (LCD_DEF_FONT == 1) //Default HD44780 font
wim	41:111ca62e8a59	1586
wim	41:111ca62e8a59	1587	#elif (LCD_C_FONT == 1) \|\| (LCD_R_FONT == 1) //PCF21xxC or PCF21xxR font
wim	41:111ca62e8a59	1588
wim	41:111ca62e8a59	1589	#elif (LCD_UTF8_FONT == 1) //UTF8 2 byte font (eg Cyrillic)
wim	41:111ca62e8a59	1590	// Continue code above to close bracket...
wim	41:111ca62e8a59	1591	} // if (value >= 0) {..
wim	41:111ca62e8a59	1592	#else
wim	41:111ca62e8a59	1593
wim	41:111ca62e8a59	1594	#endif
wim	41:111ca62e8a59	1595
wim	15:b70ebfffb258	1596	} //else
wim	15:b70ebfffb258	1597
wim	15:b70ebfffb258	1598	//Set next memoryaddress, make sure cursor blinks at next location
wim	15:b70ebfffb258	1599	addr = getAddress(_column, _row);
wim	15:b70ebfffb258	1600	_writeCommand(0x80 \| addr);
wim	15:b70ebfffb258	1601
wim	15:b70ebfffb258	1602	return value;
wim	15:b70ebfffb258	1603	}
wim	15:b70ebfffb258	1604
wim	15:b70ebfffb258	1605
wim	16:c276b75e6585	1606	// get a single character (Stream implementation)
wim	21:9eb628d9e164	1607	int TextLCD_Base::_getc() {
simon	1:ac48b187213c	1608	return -1;
simon	1:ac48b187213c	1609	}
simon	1:ac48b187213c	1610
wim	41:111ca62e8a59	1611
wim	41:111ca62e8a59	1612	#if ((LCD_C_FONT == 1) \|\| (LCD_R_FONT == 1)) //PCF21xxC or PCF21xxR font
wim	37:ce348c002929	1613	/** Convert ASCII character code to the LCD fonttable code
wim	37:ce348c002929	1614	*
wim	37:ce348c002929	1615	* @param c The character to write to the display
wim	37:ce348c002929	1616	* @return The character code for the specific fonttable of the controller
wim	37:ce348c002929	1617	*/
wim	37:ce348c002929	1618	int TextLCD_Base::ASCII_2_LCD (int c) {
wim	37:ce348c002929	1619
wim	41:111ca62e8a59	1620	//LCD_C_F0 is default for HD44780 and compatible series
wim	41:111ca62e8a59	1621	// if (_font == LCD_C_F0) return c;
wim	41:111ca62e8a59	1622
wim	41:111ca62e8a59	1623	//LCD_C_FC for PCF21XXC series
wim	41:111ca62e8a59	1624	//LCD_C_FR for PCF21XXR series
wim	39:e9c2319de9c5	1625	//Used code from Suga koubou library for PCF2119K and PCF2119R
wim	37:ce348c002929	1626	if (((c >= ' ') && (c <= '?')) \|\| ((c >= 'A') && (c <= 'Z')) \|\| ((c >= 'a') && (c <= 'z'))) {
wim	37:ce348c002929	1627	c \|= 0x80;
wim	39:e9c2319de9c5	1628	} else if (c >= 0xF0 && c <= 0xFF) {
wim	41:111ca62e8a59	1629	c &= 0x0F;
wim	37:ce348c002929	1630	}
wim	37:ce348c002929	1631	return c;
wim	37:ce348c002929	1632	}
wim	41:111ca62e8a59	1633	#endif
wim	41:111ca62e8a59	1634
wim	41:111ca62e8a59	1635	#if(LCD_UTF8_FONT == 1)
wim	41:111ca62e8a59	1636
wim	41:111ca62e8a59	1637	/** Convert UTF8 2-byte character code to the LCD fonttable code
wim	41:111ca62e8a59	1638	* @param c The character to write to the display
wim	41:111ca62e8a59	1639	* @return character code for the specific fonttable of the controller or -1 if UTF8 code is not yet complete or incorrect
wim	41:111ca62e8a59	1640	*
wim	41:111ca62e8a59	1641	* Orig by Andriy, Modified by WH
wim	41:111ca62e8a59	1642	*
wim	41:111ca62e8a59	1643	* Note: The UTF8 decoding table for a specific controller is defined and selected in file TextLCD_UTF8.inc
wim	41:111ca62e8a59	1644	* The table is accessed in this UTF_2_LCD() method through
wim	41:111ca62e8a59	1645	* #define UTF_FIRST, UTF_LAST, UTF_SEQ_REC_FIRST, UTF_SEQ_REC_LAST and
wim	41:111ca62e8a59	1646	* #define UTF_SEQ_RECODE and UTF_RND_RECODE
wim	41:111ca62e8a59	1647	*/
wim	41:111ca62e8a59	1648	int TextLCD_Base::UTF_2_LCD (int c) {
wim	41:111ca62e8a59	1649	int utf_code;
wim	41:111ca62e8a59	1650	int utf_low_byte; // Low byte UTF8
wim	41:111ca62e8a59	1651	static int utf_hi_byte = 0; // High byte UTF8
wim	41:111ca62e8a59	1652
wim	41:111ca62e8a59	1653	if (c < 0x80) { // Regular ASCII code, no need to convert
wim	41:111ca62e8a59	1654	return c;
wim	41:111ca62e8a59	1655	}
wim	41:111ca62e8a59	1656	else { // UTF8 handling, See wikipedia.org/wiki/UTF-8 and www.utf8-chartable.de
wim	41:111ca62e8a59	1657	// printf("0x%X ", c);
wim	41:111ca62e8a59	1658
wim	41:111ca62e8a59	1659	if (c >= 0xC0) { // First UTF8 byte should be formatted as 110b bbaa, Do sanity check
wim	41:111ca62e8a59	1660	utf_hi_byte = c & 0x1F; // Mask out significant bits (0x1F) and save high byte
wim	41:111ca62e8a59	1661	return -1; // Nothing to display as yet, wait for second UTF8 byte
wim	41:111ca62e8a59	1662	}
wim	41:111ca62e8a59	1663
wim	41:111ca62e8a59	1664	if (c <= 0xBF) { // Second UTF8 byte should be formatted as 10aa aaaa, Do sanity check
wim	41:111ca62e8a59	1665	utf_low_byte = c & 0x3F; // Mask out significant bits (0x3F)
wim	41:111ca62e8a59	1666
wim	41:111ca62e8a59	1667	// Compose UTF character code from UTF8 bytes. The UTF codes will be between U+0080 and U+07FF
wim	41:111ca62e8a59	1668	utf_code = (utf_hi_byte << 6) \| utf_low_byte; // 00000bbb aaaaaaaa
wim	41:111ca62e8a59	1669	// printf("0x%4X ", utf_code);
wim	41:111ca62e8a59	1670
wim	41:111ca62e8a59	1671	// Sanity check on UTF codes
wim	41:111ca62e8a59	1672	// For example Cyrillic characters are UTF encoded between 0x0400 and 0x04FF
wim	41:111ca62e8a59	1673	if ((utf_code < UTF_FIRST) \|\| (utf_code > UTF_LAST)) {
wim	41:111ca62e8a59	1674	return -1; // Invalid UTF8 code
wim	41:111ca62e8a59	1675	};
wim	41:111ca62e8a59	1676
wim	41:111ca62e8a59	1677	//Map some specific UTF codes on a character in LCD fonttable using a special correcting lookup table
wim	41:111ca62e8a59	1678	for (char i=0; UTF_RND_RECODE[i][0]; i++) { // Step through table until endvalue 0 is found or until a match is found
wim	41:111ca62e8a59	1679	if (utf_code == UTF_RND_RECODE[i][0]) { // UTF8 code match is found
wim	41:111ca62e8a59	1680	c = UTF_RND_RECODE[1][1];
wim	41:111ca62e8a59	1681	return c; // found match in correcting random table
wim	41:111ca62e8a59	1682	}
wim	41:111ca62e8a59	1683	}
wim	41:111ca62e8a59	1684
wim	41:111ca62e8a59	1685	//Sanity check on table idx range
wim	41:111ca62e8a59	1686	if ((utf_code < UTF_SEQ_REC_FIRST) \|\| (utf_code > UTF_SEQ_REC_LAST)) {
wim	41:111ca62e8a59	1687	return -1; // Invalid UTF8 code
wim	41:111ca62e8a59	1688	};
wim	41:111ca62e8a59	1689
wim	41:111ca62e8a59	1690	//Map all other UTF codes on a character in LCD fonttable using a sequential lookup table
wim	41:111ca62e8a59	1691	c = UTF_SEQ_RECODE[utf_code - UTF_SEQ_REC_FIRST];
wim	41:111ca62e8a59	1692	return c; // entry in sequential table
wim	41:111ca62e8a59	1693	}
wim	41:111ca62e8a59	1694	else {
wim	41:111ca62e8a59	1695	return -1; // Invalid UTF8 code for second byte
wim	41:111ca62e8a59	1696	}
wim	41:111ca62e8a59	1697	} // End UTF8 handling
wim	41:111ca62e8a59	1698	}
wim	41:111ca62e8a59	1699
wim	41:111ca62e8a59	1700	#endif
wim	41:111ca62e8a59	1701
wim	14:0c32b66b14b8	1702
wim	34:e5a0dcb43ecc	1703	#if(LCD_PRINTF != 1)
wim	34:e5a0dcb43ecc	1704	/** Write a character to the LCD
wim	34:e5a0dcb43ecc	1705	*
wim	34:e5a0dcb43ecc	1706	* @param c The character to write to the display
wim	34:e5a0dcb43ecc	1707	*/
wim	34:e5a0dcb43ecc	1708	int TextLCD_Base::putc(int c){
wim	34:e5a0dcb43ecc	1709	return _putc(c);
wim	34:e5a0dcb43ecc	1710	}
wim	34:e5a0dcb43ecc	1711
wim	34:e5a0dcb43ecc	1712
wim	34:e5a0dcb43ecc	1713	/** Write a raw string to the LCD
wim	34:e5a0dcb43ecc	1714	*
wim	34:e5a0dcb43ecc	1715	* @param string text, may be followed by variables to emulate formatting the string.
wim	34:e5a0dcb43ecc	1716	* However, printf formatting is NOT supported and variables will be ignored!
wim	34:e5a0dcb43ecc	1717	*/
wim	34:e5a0dcb43ecc	1718	int TextLCD_Base::printf(const char* text, ...) {
wim	34:e5a0dcb43ecc	1719
wim	34:e5a0dcb43ecc	1720	while (*text !=0) {
wim	34:e5a0dcb43ecc	1721	_putc(*text);
wim	34:e5a0dcb43ecc	1722	text++;
wim	34:e5a0dcb43ecc	1723	}
wim	34:e5a0dcb43ecc	1724	return 0;
wim	34:e5a0dcb43ecc	1725	}
wim	34:e5a0dcb43ecc	1726	#endif
wim	34:e5a0dcb43ecc	1727
wim	34:e5a0dcb43ecc	1728
wim	17:652ab113bc2e	1729	// Write a nibble using the 4-bit interface
wim	21:9eb628d9e164	1730	void TextLCD_Base::_writeNibble(int value) {
wim	17:652ab113bc2e	1731
wim	17:652ab113bc2e	1732	// Enable is Low
wim	21:9eb628d9e164	1733	this->_setEnable(true);
wim	38:cbe275b0b647	1734	this->_setData(value); // Low nibble of value on D4..D7
wim	17:652ab113bc2e	1735	wait_us(1); // Data setup time
wim	21:9eb628d9e164	1736	this->_setEnable(false);
wim	17:652ab113bc2e	1737	wait_us(1); // Datahold time
wim	17:652ab113bc2e	1738	// Enable is Low
wim	17:652ab113bc2e	1739	}
wim	17:652ab113bc2e	1740
wim	16:c276b75e6585	1741	// Write a byte using the 4-bit interface
wim	21:9eb628d9e164	1742	void TextLCD_Base::_writeByte(int value) {
wim	15:b70ebfffb258	1743
wim	15:b70ebfffb258	1744	// Enable is Low
wim	21:9eb628d9e164	1745	this->_setEnable(true);
wim	21:9eb628d9e164	1746	this->_setData(value >> 4); // High nibble
wim	15:b70ebfffb258	1747	wait_us(1); // Data setup time
wim	21:9eb628d9e164	1748	this->_setEnable(false);
wim	15:b70ebfffb258	1749	wait_us(1); // Data hold time
wim	15:b70ebfffb258	1750
wim	21:9eb628d9e164	1751	this->_setEnable(true);
wim	37:ce348c002929	1752	this->_setData(value); // Low nibble
wim	15:b70ebfffb258	1753	wait_us(1); // Data setup time
wim	21:9eb628d9e164	1754	this->_setEnable(false);
wim	15:b70ebfffb258	1755	wait_us(1); // Datahold time
wim	15:b70ebfffb258	1756
wim	15:b70ebfffb258	1757	// Enable is Low
simon	1:ac48b187213c	1758	}
simon	1:ac48b187213c	1759
wim	21:9eb628d9e164	1760	// Write a command byte to the LCD controller
wim	21:9eb628d9e164	1761	void TextLCD_Base::_writeCommand(int command) {
wim	15:b70ebfffb258	1762
wim	21:9eb628d9e164	1763	this->_setRS(false);
wim	16:c276b75e6585	1764	wait_us(1); // Data setup time for RS
wim	15:b70ebfffb258	1765
wim	21:9eb628d9e164	1766	this->_writeByte(command);
wim	15:b70ebfffb258	1767	wait_us(40); // most instructions take 40us
simon	1:ac48b187213c	1768	}
simon	1:ac48b187213c	1769
wim	21:9eb628d9e164	1770	// Write a data byte to the LCD controller
wim	21:9eb628d9e164	1771	void TextLCD_Base::_writeData(int data) {
wim	15:b70ebfffb258	1772
wim	21:9eb628d9e164	1773	this->_setRS(true);
wim	16:c276b75e6585	1774	wait_us(1); // Data setup time for RS
wim	15:b70ebfffb258	1775
wim	21:9eb628d9e164	1776	this->_writeByte(data);
wim	15:b70ebfffb258	1777	wait_us(40); // data writes take 40us
simon	1:ac48b187213c	1778	}
simon	1:ac48b187213c	1779
wim	8:03116f75b66e	1780
wim	32:59c4b8f648d4	1781	// This replaces the original _address() method.
wim	8:03116f75b66e	1782	// It is confusing since it returns the memoryaddress or-ed with the set memorycommand 0x80.
wim	8:03116f75b66e	1783	// Left it in here for compatibility with older code. New applications should use getAddress() instead.
wim	21:9eb628d9e164	1784	int TextLCD_Base::_address(int column, int row) {
wim	8:03116f75b66e	1785	return 0x80 \| getAddress(column, row);
wim	8:03116f75b66e	1786	}
wim	8:03116f75b66e	1787
wim	30:033048611c01	1788
wim	30:033048611c01	1789	// This is new method to return the memory address based on row, column and displaytype.
wim	30:033048611c01	1790	//
wim	30:033048611c01	1791	/** Return the memoryaddress of screen column and row location
wim	30:033048611c01	1792	*
wim	30:033048611c01	1793	* @param column The horizontal position from the left, indexed from 0
wim	30:033048611c01	1794	* @param row The vertical position from the top, indexed from 0
wim	36:9f5f86dfd44a	1795	* @return The memoryaddress of screen column and row location
wim	30:033048611c01	1796	*
wim	30:033048611c01	1797	*/
wim	30:033048611c01	1798	int TextLCD_Base::getAddress(int column, int row) {
wim	30:033048611c01	1799
wim	30:033048611c01	1800	switch (_addr_mode) {
wim	30:033048611c01	1801
wim	30:033048611c01	1802	case LCD_T_A:
wim	30:033048611c01	1803	//Default addressing mode for 1, 2 and 4 rows (except 40x4)
wim	30:033048611c01	1804	//The two available rows are split and stacked on top of eachother. Addressing for 3rd and 4th line continues where lines 1 and 2 were split.
wim	30:033048611c01	1805	//Displays top rows when less than four are used.
wim	30:033048611c01	1806	switch (row) {
wim	30:033048611c01	1807	case 0:
wim	30:033048611c01	1808	return 0x00 + column;
wim	30:033048611c01	1809	case 1:
wim	30:033048611c01	1810	return 0x40 + column;
wim	30:033048611c01	1811	case 2:
wim	30:033048611c01	1812	return 0x00 + _nr_cols + column;
wim	30:033048611c01	1813	case 3:
wim	30:033048611c01	1814	return 0x40 + _nr_cols + column;
wim	30:033048611c01	1815	// Should never get here.
wim	39:e9c2319de9c5	1816	// default:
wim	39:e9c2319de9c5	1817	// return 0x00;
wim	30:033048611c01	1818	}
wim	30:033048611c01	1819
wim	30:033048611c01	1820	case LCD_T_B:
wim	30:033048611c01	1821	// LCD8x2B is a special layout of LCD16x1
wim	30:033048611c01	1822	if (row==0)
wim	30:033048611c01	1823	return 0x00 + column;
wim	30:033048611c01	1824	else
wim	30:033048611c01	1825	// return _nr_cols + column;
wim	30:033048611c01	1826	return 0x08 + column;
wim	30:033048611c01	1827
wim	30:033048611c01	1828	case LCD_T_C:
wim	30:033048611c01	1829	// LCD16x1C is a special layout of LCD8x2
wim	33:900a94bc7585	1830	// LCD32x1C is a special layout of LCD16x2
wim	33:900a94bc7585	1831	// LCD40x1C is a special layout of LCD20x2
wim	33:900a94bc7585	1832	#if(0)
wim	32:59c4b8f648d4	1833	if (column < 8)
wim	30:033048611c01	1834	return 0x00 + column;
wim	30:033048611c01	1835	else
wim	30:033048611c01	1836	return 0x40 + (column - 8);
wim	32:59c4b8f648d4	1837	#else
wim	32:59c4b8f648d4	1838	if (column < (_nr_cols >> 1))
wim	32:59c4b8f648d4	1839	return 0x00 + column;
wim	32:59c4b8f648d4	1840	else
wim	32:59c4b8f648d4	1841	return 0x40 + (column - (_nr_cols >> 1));
wim	32:59c4b8f648d4	1842	#endif
wim	30:033048611c01	1843
wim	30:033048611c01	1844	case LCD_T_D:
wim	36:9f5f86dfd44a	1845	//Alternate addressing mode for 3 and 4 row displays (except 40x4). Used by PCF21XX, KS0073, KS0078, SSD1803
wim	30:033048611c01	1846	//The 4 available rows start at a hardcoded address.
wim	30:033048611c01	1847	//Displays top rows when less than four are used.
wim	30:033048611c01	1848	switch (row) {
wim	30:033048611c01	1849	case 0:
wim	30:033048611c01	1850	return 0x00 + column;
wim	30:033048611c01	1851	case 1:
wim	30:033048611c01	1852	return 0x20 + column;
wim	30:033048611c01	1853	case 2:
wim	30:033048611c01	1854	return 0x40 + column;
wim	30:033048611c01	1855	case 3:
wim	30:033048611c01	1856	return 0x60 + column;
wim	30:033048611c01	1857	// Should never get here.
wim	39:e9c2319de9c5	1858	// default:
wim	39:e9c2319de9c5	1859	// return 0x00;
wim	30:033048611c01	1860	}
wim	30:033048611c01	1861
wim	30:033048611c01	1862	case LCD_T_D1:
wim	36:9f5f86dfd44a	1863	//Alternate addressing mode for 3 row displays. Used by PCF21XX, KS0073, KS0078, SSD1803
wim	30:033048611c01	1864	//The 4 available rows start at a hardcoded address.
wim	30:033048611c01	1865	//Skips top row of 4 row display and starts display at row 1
wim	30:033048611c01	1866	switch (row) {
wim	30:033048611c01	1867	case 0:
wim	30:033048611c01	1868	return 0x20 + column;
wim	30:033048611c01	1869	case 1:
wim	30:033048611c01	1870	return 0x40 + column;
wim	30:033048611c01	1871	case 2:
wim	30:033048611c01	1872	return 0x60 + column;
wim	30:033048611c01	1873	// Should never get here.
wim	39:e9c2319de9c5	1874	// default:
wim	39:e9c2319de9c5	1875	// return 0x00;
wim	30:033048611c01	1876	}
wim	30:033048611c01	1877
wim	30:033048611c01	1878	case LCD_T_E:
wim	30:033048611c01	1879	// LCD40x4 is a special case since it has 2 controllers.
wim	30:033048611c01	1880	// Each controller is configured as 40x2 (Type A)
wim	30:033048611c01	1881	if (row<2) {
wim	30:033048611c01	1882	// Test to see if we need to switch between controllers
wim	30:033048611c01	1883	if (_ctrl_idx != _LCDCtrl_0) {
wim	30:033048611c01	1884
wim	30:033048611c01	1885	// Second LCD controller Cursor Off
wim	30:033048611c01	1886	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	30:033048611c01	1887
wim	30:033048611c01	1888	// Select primary controller
wim	30:033048611c01	1889	_ctrl_idx = _LCDCtrl_0;
wim	30:033048611c01	1890
wim	30:033048611c01	1891	// Restore cursormode on primary LCD controller
wim	30:033048611c01	1892	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1893	}
wim	30:033048611c01	1894
wim	30:033048611c01	1895	return 0x00 + (row * 0x40) + column;
wim	30:033048611c01	1896	}
wim	30:033048611c01	1897	else {
wim	30:033048611c01	1898
wim	30:033048611c01	1899	// Test to see if we need to switch between controllers
wim	30:033048611c01	1900	if (_ctrl_idx != _LCDCtrl_1) {
wim	30:033048611c01	1901	// Primary LCD controller Cursor Off
wim	30:033048611c01	1902	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	30:033048611c01	1903
wim	30:033048611c01	1904	// Select secondary controller
wim	30:033048611c01	1905	_ctrl_idx = _LCDCtrl_1;
wim	30:033048611c01	1906
wim	30:033048611c01	1907	// Restore cursormode on secondary LCD controller
wim	30:033048611c01	1908	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1909	}
wim	30:033048611c01	1910
wim	30:033048611c01	1911	return 0x00 + ((row-2) * 0x40) + column;
wim	30:033048611c01	1912	}
wim	30:033048611c01	1913
wim	32:59c4b8f648d4	1914	case LCD_T_F:
wim	32:59c4b8f648d4	1915	//Alternate addressing mode for 3 row displays.
wim	32:59c4b8f648d4	1916	//The first half of 3rd row continues from 1st row, the second half continues from 2nd row.
wim	32:59c4b8f648d4	1917	switch (row) {
wim	32:59c4b8f648d4	1918	case 0:
wim	32:59c4b8f648d4	1919	return 0x00 + column;
wim	32:59c4b8f648d4	1920	case 1:
wim	32:59c4b8f648d4	1921	return 0x40 + column;
wim	32:59c4b8f648d4	1922	case 2:
wim	32:59c4b8f648d4	1923	if (column < (_nr_cols >> 1)) // check first or second half of line
wim	32:59c4b8f648d4	1924	return (0x00 + _nr_cols + column);
wim	32:59c4b8f648d4	1925	else
wim	32:59c4b8f648d4	1926	return (0x40 + _nr_cols + (column - (_nr_cols >> 1)));
wim	32:59c4b8f648d4	1927	// Should never get here.
wim	39:e9c2319de9c5	1928	// default:
wim	39:e9c2319de9c5	1929	// return 0x00;
wim	32:59c4b8f648d4	1930	}
wim	32:59c4b8f648d4	1931
wim	32:59c4b8f648d4	1932	case LCD_T_G:
wim	32:59c4b8f648d4	1933	//Alternate addressing mode for 3 row displays. Used by ST7036
wim	32:59c4b8f648d4	1934	switch (row) {
wim	32:59c4b8f648d4	1935	case 0:
wim	32:59c4b8f648d4	1936	return 0x00 + column;
wim	32:59c4b8f648d4	1937	case 1:
wim	32:59c4b8f648d4	1938	return 0x10 + column;
wim	32:59c4b8f648d4	1939	case 2:
wim	32:59c4b8f648d4	1940	return 0x20 + column;
wim	32:59c4b8f648d4	1941	// Should never get here.
wim	39:e9c2319de9c5	1942	// default:
wim	39:e9c2319de9c5	1943	// return 0x00;
wim	32:59c4b8f648d4	1944	}
wim	32:59c4b8f648d4	1945
wim	30:033048611c01	1946	// Should never get here.
wim	30:033048611c01	1947	default:
wim	30:033048611c01	1948	return 0x00;
wim	32:59c4b8f648d4	1949
wim	32:59c4b8f648d4	1950	} // switch _addr_mode
wim	30:033048611c01	1951	}
wim	30:033048611c01	1952
wim	30:033048611c01	1953
wim	29:a3663151aa65	1954	/** Set the memoryaddress of screen column and row location
wim	29:a3663151aa65	1955	*
wim	29:a3663151aa65	1956	* @param column The horizontal position from the left, indexed from 0
wim	29:a3663151aa65	1957	* @param row The vertical position from the top, indexed from 0
wim	29:a3663151aa65	1958	*/
wim	21:9eb628d9e164	1959	void TextLCD_Base::setAddress(int column, int row) {
wim	15:b70ebfffb258	1960
wim	15:b70ebfffb258	1961	// Sanity Check column
wim	15:b70ebfffb258	1962	if (column < 0) {
wim	15:b70ebfffb258	1963	_column = 0;
wim	15:b70ebfffb258	1964	}
wim	36:9f5f86dfd44a	1965	else if (column >= _nr_cols) {
wim	36:9f5f86dfd44a	1966	_column = _nr_cols - 1;
wim	15:b70ebfffb258	1967	} else _column = column;
wim	8:03116f75b66e	1968
wim	15:b70ebfffb258	1969	// Sanity Check row
wim	15:b70ebfffb258	1970	if (row < 0) {
wim	15:b70ebfffb258	1971	_row = 0;
wim	15:b70ebfffb258	1972	}
wim	36:9f5f86dfd44a	1973	else if (row >= _nr_rows) {
wim	36:9f5f86dfd44a	1974	_row = _nr_rows - 1;
wim	15:b70ebfffb258	1975	} else _row = row;
wim	15:b70ebfffb258	1976
wim	15:b70ebfffb258	1977
wim	15:b70ebfffb258	1978	// Compute the memory address
wim	15:b70ebfffb258	1979	// For LCD40x4: switch controllers if needed
wim	15:b70ebfffb258	1980	// switch cursor if needed
wim	15:b70ebfffb258	1981	int addr = getAddress(_column, _row);
wim	8:03116f75b66e	1982
wim	13:24506ba22480	1983	_writeCommand(0x80 \| addr);
wim	8:03116f75b66e	1984	}
simon	1:ac48b187213c	1985
wim	29:a3663151aa65	1986
wim	29:a3663151aa65	1987	/** Return the number of columns
wim	29:a3663151aa65	1988	*
wim	36:9f5f86dfd44a	1989	* @return The number of columns
wim	30:033048611c01	1990	*
wim	30:033048611c01	1991	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	29:a3663151aa65	1992	*/
wim	21:9eb628d9e164	1993	int TextLCD_Base::columns() {
wim	30:033048611c01	1994
wim	30:033048611c01	1995	// Columns encoded in b7..b0
wim	30:033048611c01	1996	//return (_type & 0xFF);
wim	31:ef31cd8a00d1	1997	return _nr_cols;
simon	1:ac48b187213c	1998	}
simon	1:ac48b187213c	1999
wim	29:a3663151aa65	2000	/** Return the number of rows
wim	29:a3663151aa65	2001	*
wim	36:9f5f86dfd44a	2002	* @return The number of rows
wim	30:033048611c01	2003	*
wim	30:033048611c01	2004	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	29:a3663151aa65	2005	*/
wim	21:9eb628d9e164	2006	int TextLCD_Base::rows() {
wim	30:033048611c01	2007
wim	30:033048611c01	2008	// Rows encoded in b15..b8
wim	30:033048611c01	2009	//return ((_type >> 8) & 0xFF);
wim	30:033048611c01	2010	return _nr_rows;
simon	1:ac48b187213c	2011	}
wim	10:dd9b3a696acd	2012
wim	29:a3663151aa65	2013	/** Set the Cursormode
wim	29:a3663151aa65	2014	*
wim	29:a3663151aa65	2015	* @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
wim	29:a3663151aa65	2016	*/
wim	21:9eb628d9e164	2017	void TextLCD_Base::setCursor(LCDCursor cursorMode) {
wim	15:b70ebfffb258	2018
wim	17:652ab113bc2e	2019	// Save new cursor mode, needed when 2 controllers are in use or when display is switched off/on
wim	17:652ab113bc2e	2020	_currentCursor = cursorMode;
wim	10:dd9b3a696acd	2021
wim	17:652ab113bc2e	2022	// Configure only current LCD controller
wim	31:ef31cd8a00d1	2023	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	15:b70ebfffb258	2024	}
wim	15:b70ebfffb258	2025
wim	29:a3663151aa65	2026	/** Set the Displaymode
wim	29:a3663151aa65	2027	*
wim	29:a3663151aa65	2028	* @param displayMode The Display mode (DispOff, DispOn)
wim	29:a3663151aa65	2029	*/
wim	21:9eb628d9e164	2030	void TextLCD_Base::setMode(LCDMode displayMode) {
wim	17:652ab113bc2e	2031
wim	17:652ab113bc2e	2032	// Save new displayMode, needed when 2 controllers are in use or when cursor is changed
wim	17:652ab113bc2e	2033	_currentMode = displayMode;
wim	41:111ca62e8a59	2034
wim	41:111ca62e8a59	2035	#if (LCD_TWO_CTRL == 1)
wim	17:652ab113bc2e	2036	// Select and configure second LCD controller when needed
wim	17:652ab113bc2e	2037	if(_type==LCD40x4) {
wim	21:9eb628d9e164	2038	if (_ctrl_idx==_LCDCtrl_0) {
wim	17:652ab113bc2e	2039	// Configure primary LCD controller
wim	17:652ab113bc2e	2040	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	11:9ec02df863a1	2041
wim	17:652ab113bc2e	2042	// Select 2nd controller
wim	21:9eb628d9e164	2043	_ctrl_idx=_LCDCtrl_1;
wim	17:652ab113bc2e	2044
wim	17:652ab113bc2e	2045	// Configure secondary LCD controller
wim	21:9eb628d9e164	2046	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	11:9ec02df863a1	2047
wim	17:652ab113bc2e	2048	// Restore current controller
wim	21:9eb628d9e164	2049	_ctrl_idx=_LCDCtrl_0;
wim	17:652ab113bc2e	2050	}
wim	17:652ab113bc2e	2051	else {
wim	17:652ab113bc2e	2052	// Select primary controller
wim	21:9eb628d9e164	2053	_ctrl_idx=_LCDCtrl_0;
wim	17:652ab113bc2e	2054
wim	17:652ab113bc2e	2055	// Configure primary LCD controller
wim	21:9eb628d9e164	2056	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	17:652ab113bc2e	2057
wim	17:652ab113bc2e	2058	// Restore current controller
wim	21:9eb628d9e164	2059	_ctrl_idx=_LCDCtrl_1;
wim	11:9ec02df863a1	2060
wim	17:652ab113bc2e	2061	// Configure secondary LCD controller
wim	17:652ab113bc2e	2062	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	10:dd9b3a696acd	2063	}
wim	17:652ab113bc2e	2064	}
wim	17:652ab113bc2e	2065	else {
wim	17:652ab113bc2e	2066	// Configure primary LCD controller
wim	17:652ab113bc2e	2067	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	2068	}
wim	41:111ca62e8a59	2069	#else
wim	41:111ca62e8a59	2070	// Support only one LCD controller
wim	41:111ca62e8a59	2071	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	41:111ca62e8a59	2072
wim	41:111ca62e8a59	2073	#endif
wim	17:652ab113bc2e	2074	}
wim	17:652ab113bc2e	2075
wim	29:a3663151aa65	2076	/** Low level method to restore the cursortype and display mode for current controller
wim	29:a3663151aa65	2077	*/
wim	36:9f5f86dfd44a	2078	void TextLCD_Base::_setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType) {
wim	36:9f5f86dfd44a	2079
wim	36:9f5f86dfd44a	2080	// Configure current LCD controller
wim	36:9f5f86dfd44a	2081	switch (_ctrl) {
wim	36:9f5f86dfd44a	2082	case ST7070:
wim	36:9f5f86dfd44a	2083	//ST7070 does not support Cursorblink. The P bit selects the font instead !
wim	36:9f5f86dfd44a	2084	_writeCommand(0x08 \| displayMode \| (cursorType & 0x02));
wim	36:9f5f86dfd44a	2085	break;
wim	36:9f5f86dfd44a	2086	default:
wim	36:9f5f86dfd44a	2087	_writeCommand(0x08 \| displayMode \| cursorType);
wim	36:9f5f86dfd44a	2088	break;
wim	36:9f5f86dfd44a	2089	} //switch
wim	10:dd9b3a696acd	2090	}
wim	10:dd9b3a696acd	2091
wim	29:a3663151aa65	2092	/** Set the Backlight mode
wim	29:a3663151aa65	2093	*
wim	29:a3663151aa65	2094	* @param backlightMode The Backlight mode (LightOff, LightOn)
wim	29:a3663151aa65	2095	*/
wim	21:9eb628d9e164	2096	void TextLCD_Base::setBacklight(LCDBacklight backlightMode) {
wim	20:e0da005a777f	2097
wim	35:311be6444a39	2098	#if (BACKLIGHT_INV==0)
wim	35:311be6444a39	2099	// Positive Backlight control pin logic
wim	20:e0da005a777f	2100	if (backlightMode == LightOn) {
wim	35:311be6444a39	2101	this->_setBL(true);
wim	20:e0da005a777f	2102	}
wim	20:e0da005a777f	2103	else {
wim	21:9eb628d9e164	2104	this->_setBL(false);
wim	20:e0da005a777f	2105	}
wim	35:311be6444a39	2106	#else
wim	35:311be6444a39	2107	// Inverted Backlight control pin logic
wim	35:311be6444a39	2108	if (backlightMode == LightOn) {
wim	35:311be6444a39	2109	this->_setBL(false);
wim	35:311be6444a39	2110	}
wim	35:311be6444a39	2111	else {
wim	35:311be6444a39	2112	this->_setBL(true);
wim	35:311be6444a39	2113	}
wim	35:311be6444a39	2114	#endif
wim	20:e0da005a777f	2115	}
wim	20:e0da005a777f	2116
wim	29:a3663151aa65	2117	/** Set User Defined Characters
wim	29:a3663151aa65	2118	*
wim	34:e5a0dcb43ecc	2119	* @param unsigned char c The Index of the UDC (0..7) for HD44780 or clones and (0..15) for some more advanced controllers
wim	34:e5a0dcb43ecc	2120	* @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
wim	29:a3663151aa65	2121	*/
wim	21:9eb628d9e164	2122	void TextLCD_Base::setUDC(unsigned char c, char *udc_data) {
wim	41:111ca62e8a59	2123
wim	41:111ca62e8a59	2124	#if (LCD_TWO_CTRL == 1)
wim	15:b70ebfffb258	2125	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	2126	if(_type==LCD40x4) {
wim	19:c747b9e2e7b8	2127	_LCDCtrl_Idx current_ctrl_idx = _ctrl_idx; // Temp save current controller
wim	15:b70ebfffb258	2128
wim	15:b70ebfffb258	2129	// Select primary controller
wim	21:9eb628d9e164	2130	_ctrl_idx=_LCDCtrl_0;
wim	15:b70ebfffb258	2131
wim	15:b70ebfffb258	2132	// Configure primary LCD controller
wim	15:b70ebfffb258	2133	_setUDC(c, udc_data);
wim	15:b70ebfffb258	2134
wim	15:b70ebfffb258	2135	// Select 2nd controller
wim	21:9eb628d9e164	2136	_ctrl_idx=_LCDCtrl_1;
wim	15:b70ebfffb258	2137
wim	15:b70ebfffb258	2138	// Configure secondary LCD controller
wim	15:b70ebfffb258	2139	_setUDC(c, udc_data);
wim	11:9ec02df863a1	2140
wim	15:b70ebfffb258	2141	// Restore current controller
wim	19:c747b9e2e7b8	2142	_ctrl_idx=current_ctrl_idx;
wim	15:b70ebfffb258	2143	}
wim	15:b70ebfffb258	2144	else {
wim	15:b70ebfffb258	2145	// Configure primary LCD controller
wim	15:b70ebfffb258	2146	_setUDC(c, udc_data);
wim	34:e5a0dcb43ecc	2147	}
wim	41:111ca62e8a59	2148	#else
wim	41:111ca62e8a59	2149	// Support only one LCD controller
wim	41:111ca62e8a59	2150	_setUDC(c, udc_data);
wim	41:111ca62e8a59	2151	#endif
wim	15:b70ebfffb258	2152	}
wim	15:b70ebfffb258	2153
wim	34:e5a0dcb43ecc	2154	/** Low level method to store user defined characters for current controller
wim	34:e5a0dcb43ecc	2155	*
wim	34:e5a0dcb43ecc	2156	* @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
wim	34:e5a0dcb43ecc	2157	* @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
wim	34:e5a0dcb43ecc	2158	*/
wim	34:e5a0dcb43ecc	2159	void TextLCD_Base::_setUDC(unsigned char c, char *udc_data) {
wim	34:e5a0dcb43ecc	2160
wim	34:e5a0dcb43ecc	2161	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2162	case PCF2103_3V3 : // Some UDCs may be used for Icons
wim	34:e5a0dcb43ecc	2163	case PCF2113_3V3 : // Some UDCs may be used for Icons
wim	34:e5a0dcb43ecc	2164	case PCF2116_3V3 :
wim	34:e5a0dcb43ecc	2165	case PCF2116_5V :
wim	40:d3496c3ea301	2166	case PCF2119_3V3 : // Some UDCs may be used for Icons
wim	40:d3496c3ea301	2167	case PCF2119R_3V3: // Some UDCs may be used for Icons
wim	34:e5a0dcb43ecc	2168	c = c & 0x0F; // mask down to valid range
wim	34:e5a0dcb43ecc	2169	break;
wim	34:e5a0dcb43ecc	2170
wim	34:e5a0dcb43ecc	2171	default:
wim	34:e5a0dcb43ecc	2172	c = c & 0x07; // mask down to valid range
wim	34:e5a0dcb43ecc	2173	break;
wim	34:e5a0dcb43ecc	2174	} //switch _ctrl
wim	34:e5a0dcb43ecc	2175
wim	34:e5a0dcb43ecc	2176	// Select DD RAM for current LCD controller
wim	34:e5a0dcb43ecc	2177	// This is needed to correctly set Bit 6 of the addresspointer for controllers that support 16 UDCs
wim	34:e5a0dcb43ecc	2178	_writeCommand(0x80 \| ((c << 3) & 0x40)) ;
wim	34:e5a0dcb43ecc	2179
wim	34:e5a0dcb43ecc	2180	// Select CG RAM for current LCD controller
wim	34:e5a0dcb43ecc	2181	_writeCommand(0x40 \| ((c << 3) & 0x3F)); //Set CG-RAM address, (note that Bit 6 is retained and can not be set by this command !)
wim	34:e5a0dcb43ecc	2182	//8 sequential locations needed per UDC
wim	34:e5a0dcb43ecc	2183	// Store UDC pattern
wim	34:e5a0dcb43ecc	2184	for (int i=0; i<8; i++) {
wim	34:e5a0dcb43ecc	2185	_writeData(*udc_data++);
wim	34:e5a0dcb43ecc	2186	}
wim	34:e5a0dcb43ecc	2187
wim	34:e5a0dcb43ecc	2188	//Select DD RAM again for current LCD controller and restore the addresspointer
wim	34:e5a0dcb43ecc	2189	int addr = getAddress(_column, _row);
wim	34:e5a0dcb43ecc	2190	_writeCommand(0x80 \| addr);
wim	34:e5a0dcb43ecc	2191	}
wim	32:59c4b8f648d4	2192
wim	39:e9c2319de9c5	2193	#if(LCD_BLINK == 1)
wim	36:9f5f86dfd44a	2194	/** Set UDC Blink and Icon blink
wim	33:900a94bc7585	2195	* setUDCBlink method is supported by some compatible devices (eg SSD1803)
wim	33:900a94bc7585	2196	*
wim	33:900a94bc7585	2197	* @param blinkMode The Blink mode (BlinkOff, BlinkOn)
wim	33:900a94bc7585	2198	*/
wim	33:900a94bc7585	2199	void TextLCD_Base::setUDCBlink(LCDBlink blinkMode){
wim	36:9f5f86dfd44a	2200	// Blinking UDCs (and icons) are enabled when a specific controlbit (BE) is set.
wim	36:9f5f86dfd44a	2201	// The blinking pixels in the UDC and icons can be controlled by setting additional bits in the UDC or icon bitpattern.
wim	36:9f5f86dfd44a	2202	// UDCs are defined by an 8 byte bitpattern. The P0..P4 form the character pattern.
wim	33:900a94bc7585	2203	// P7 P6 P5 P4 P3 P2 P1 P0
wim	33:900a94bc7585	2204	// 0 B1 B0 x 0 1 1 1 0
wim	33:900a94bc7585	2205	// 1 B1 B0 x 1 0 0 0 1
wim	33:900a94bc7585	2206	// .............
wim	33:900a94bc7585	2207	// 7 B1 B0 x 1 0 0 0 1
wim	33:900a94bc7585	2208	//
wim	33:900a94bc7585	2209	// Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
wim	33:900a94bc7585	2210	// B1 B0 Mode
wim	33:900a94bc7585	2211	// 0 0 No Blinking in this row of the UDC
wim	33:900a94bc7585	2212	// 0 1 Enabled pixels in P4 will blink
wim	33:900a94bc7585	2213	// 1 x Enabled pixels in P0..P4 will blink
wim	36:9f5f86dfd44a	2214	//
wim	36:9f5f86dfd44a	2215	// Note: the PCF2103 and PCF2113 use UDCs to set Icons
wim	36:9f5f86dfd44a	2216	// 3 x 8 rows x 5 bits = 120 bits Icons for Normal pattern (UDC 0..2) and
wim	36:9f5f86dfd44a	2217	// 3 x 8 rows x 5 bits = 120 bits Icons for Blink pattern (UDC 4..6)
wim	36:9f5f86dfd44a	2218	// Note: the PCF2119 uses UDCs to set Icons
wim	36:9f5f86dfd44a	2219	// 4 x 8 rows x 5 bits = 160 bits Icons for Normal pattern (UDC 0..3) and
wim	36:9f5f86dfd44a	2220	// 4 x 8 rows x 5 bits = 160 bits Icons for Blink pattern (UDC 4..7)
wim	33:900a94bc7585	2221	switch (blinkMode) {
wim	33:900a94bc7585	2222	case BlinkOn:
wim	36:9f5f86dfd44a	2223	// Controllers that support UDC/Icon Blink
wim	33:900a94bc7585	2224	switch (_ctrl) {
wim	40:d3496c3ea301	2225	case KS0073 :
wim	40:d3496c3ea301	2226	case KS0078 :
wim	40:d3496c3ea301	2227	case HD66712 :
wim	36:9f5f86dfd44a	2228	_function_1 \|= 0x02; // Enable UDC/Icon Blink
wim	36:9f5f86dfd44a	2229	_writeCommand(0x20 \| _function_1); // Function set 0 0 1 DL N RE(1) BE 0/LP (Ext Regs)
wim	33:900a94bc7585	2230
wim	33:900a94bc7585	2231	_writeCommand(0x20 \| _function); // Function set 0 0 1 DL N RE(0) DH REV (Std Regs)
wim	40:d3496c3ea301	2232	break; // case KS0073, KS0078, HD66712 Controller
wim	33:900a94bc7585	2233
wim	33:900a94bc7585	2234	case US2066_3V3 :
wim	33:900a94bc7585	2235	case SSD1803_3V3 :
wim	36:9f5f86dfd44a	2236	_function_1 \|= 0x04; // Enable UDC/Icon Blink
wim	33:900a94bc7585	2237	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	2238	// Select Ext Instr Set
wim	33:900a94bc7585	2239
wim	33:900a94bc7585	2240	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	2241	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	2242	break; // case SSD1803, US2066
wim	36:9f5f86dfd44a	2243
wim	36:9f5f86dfd44a	2244	case PCF2103_3V3 :
wim	36:9f5f86dfd44a	2245	case PCF2113_3V3 :
wim	36:9f5f86dfd44a	2246	case PCF2119_3V3 :
wim	39:e9c2319de9c5	2247	case PCF2119R_3V3 :
wim	36:9f5f86dfd44a	2248	// Enable Icon Blink
wim	36:9f5f86dfd44a	2249	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	36:9f5f86dfd44a	2250	_writeCommand(0x08 \| 0x02); // ICON Conf 0000 1, IM=0 (Char mode), IB=1 (Icon blink), 0 (Instr. Set 1)
wim	36:9f5f86dfd44a	2251	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	36:9f5f86dfd44a	2252
wim	36:9f5f86dfd44a	2253	break;
wim	33:900a94bc7585	2254
wim	33:900a94bc7585	2255	default:
wim	33:900a94bc7585	2256	//Unsupported feature for other controllers
wim	33:900a94bc7585	2257	break;
wim	33:900a94bc7585	2258	} //switch _ctrl
wim	33:900a94bc7585	2259
wim	36:9f5f86dfd44a	2260	break; // BlinkOn
wim	33:900a94bc7585	2261
wim	33:900a94bc7585	2262	case BlinkOff:
wim	33:900a94bc7585	2263	// Controllers that support UDC Blink
wim	33:900a94bc7585	2264	switch (_ctrl) {
wim	40:d3496c3ea301	2265	case KS0073 :
wim	40:d3496c3ea301	2266	case KS0078 :
wim	40:d3496c3ea301	2267	case HD66712:
wim	36:9f5f86dfd44a	2268	_function_1 &= ~0x02; // Disable UDC/Icon Blink
wim	36:9f5f86dfd44a	2269	_writeCommand(0x20 \| _function_1); // Function set 0 0 1 DL N RE(1) BE 0/LP (Ext Regs)
wim	33:900a94bc7585	2270
wim	33:900a94bc7585	2271	_writeCommand(0x20 \| _function); // Function set 0 0 1 DL N RE(0) DH REV (Std Regs)
wim	40:d3496c3ea301	2272	break; // case KS0073, KS0078, HD66712 Controller
wim	33:900a94bc7585	2273
wim	33:900a94bc7585	2274	case US2066_3V3 :
wim	33:900a94bc7585	2275	case SSD1803_3V3 :
wim	36:9f5f86dfd44a	2276	_function_1 &= ~0x04; // Disable UDC/Icon Blink
wim	33:900a94bc7585	2277	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	2278	// Select Ext Instr Set
wim	33:900a94bc7585	2279
wim	33:900a94bc7585	2280	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	2281	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	2282	break; // case SSD1803, US2066
wim	36:9f5f86dfd44a	2283
wim	36:9f5f86dfd44a	2284	case PCF2103_3V3 :
wim	39:e9c2319de9c5	2285	case PCF2113_3V3 :
wim	39:e9c2319de9c5	2286	case PCF2119_3V3 :
wim	39:e9c2319de9c5	2287	case PCF2119R_3V3 :
wim	36:9f5f86dfd44a	2288	// Disable Icon Blink
wim	36:9f5f86dfd44a	2289	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	36:9f5f86dfd44a	2290	_writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=1 (Icon blink), 0 (Instr. Set 1)
wim	36:9f5f86dfd44a	2291	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	36:9f5f86dfd44a	2292
wim	36:9f5f86dfd44a	2293	break;
wim	33:900a94bc7585	2294
wim	33:900a94bc7585	2295	default:
wim	33:900a94bc7585	2296	//Unsupported feature for other controllers
wim	33:900a94bc7585	2297	break;
wim	33:900a94bc7585	2298	} //switch _ctrl
wim	33:900a94bc7585	2299
wim	36:9f5f86dfd44a	2300	break; //BlinkOff
wim	33:900a94bc7585	2301
wim	33:900a94bc7585	2302	default:
wim	33:900a94bc7585	2303	break;
wim	33:900a94bc7585	2304	} // blinkMode
wim	33:900a94bc7585	2305
wim	33:900a94bc7585	2306	} // setUDCBlink()
wim	39:e9c2319de9c5	2307	#endif
wim	33:900a94bc7585	2308
wim	41:111ca62e8a59	2309	#if(LCD_CONTRAST == 1)
wim	32:59c4b8f648d4	2310	/** Set Contrast
wim	32:59c4b8f648d4	2311	* setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
wim	32:59c4b8f648d4	2312	* Initial code for ST70XX imported from fork by JH1PJL
wim	32:59c4b8f648d4	2313	*
wim	32:59c4b8f648d4	2314	* @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
wim	32:59c4b8f648d4	2315	* @return none
wim	32:59c4b8f648d4	2316	*/
wim	32:59c4b8f648d4	2317	//@TODO Add support for 40x4 dual controller
wim	32:59c4b8f648d4	2318	void TextLCD_Base::setContrast(unsigned char c) {
wim	32:59c4b8f648d4	2319
wim	32:59c4b8f648d4	2320	// Function set mode stored during Init. Make sure we dont accidentally switch between 1-line and 2-line mode!
wim	32:59c4b8f648d4	2321	// Icon/Booster mode stored during Init. Make sure we dont accidentally change this!
wim	32:59c4b8f648d4	2322
wim	32:59c4b8f648d4	2323	_contrast = c & 0x3F; // Sanity check
wim	32:59c4b8f648d4	2324
wim	33:900a94bc7585	2325	switch (_ctrl) {
wim	32:59c4b8f648d4	2326	case PCF2113_3V3 :
wim	39:e9c2319de9c5	2327	case PCF2119_3V3 :
wim	39:e9c2319de9c5	2328	case PCF2119R_3V3 :
wim	32:59c4b8f648d4	2329	if (_contrast < 5) _contrast = 0; // See datasheet. Sanity check for PCF2113/PCF2119
wim	32:59c4b8f648d4	2330	if (_contrast > 55) _contrast = 55;
wim	32:59c4b8f648d4	2331
wim	32:59c4b8f648d4	2332	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	2333	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	2334	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	2335	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	2336	break;
wim	32:59c4b8f648d4	2337
wim	32:59c4b8f648d4	2338	case ST7032_3V3 :
wim	32:59c4b8f648d4	2339	case ST7032_5V :
wim	32:59c4b8f648d4	2340	case ST7036_3V3 :
wim	32:59c4b8f648d4	2341	// case ST7036_5V :
wim	41:111ca62e8a59	2342	case SSD1803_3V3 :
wim	41:111ca62e8a59	2343	case SPLC792A_3V3 :
wim	32:59c4b8f648d4	2344	_writeCommand(0x20 \| _function \| 0x01); // Select Instruction Set = 1
wim	32:59c4b8f648d4	2345	_writeCommand(0x70 \| (_contrast & 0x0F)); // Contrast Low bits
wim	32:59c4b8f648d4	2346	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Contrast High bits
wim	32:59c4b8f648d4	2347	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	2348	break;
wim	32:59c4b8f648d4	2349
wim	33:900a94bc7585	2350	case US2066_3V3 :
wim	33:900a94bc7585	2351	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	2352	// Select Extended Instruction Set
wim	33:900a94bc7585	2353
wim	33:900a94bc7585	2354	_writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	2355
wim	33:900a94bc7585	2356	_writeCommand(0x81); // Set Contrast Control: 1 0 0 0 0 0 0 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	2357	_writeCommand((_contrast << 2) \| 0x03); // Set Contrast Value: 8 bits. Use 6 bits for compatibility
wim	33:900a94bc7585	2358
wim	33:900a94bc7585	2359	_writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
wim	33:900a94bc7585	2360
wim	33:900a94bc7585	2361	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	2362	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	2363	break;
wim	33:900a94bc7585	2364
wim	34:e5a0dcb43ecc	2365	//not yet tested on hardware
wim	32:59c4b8f648d4	2366	case PT6314 :
wim	32:59c4b8f648d4	2367	// Only 2 significant bits
wim	32:59c4b8f648d4	2368	// 0x00 = 100%
wim	32:59c4b8f648d4	2369	// 0x01 = 75%
wim	32:59c4b8f648d4	2370	// 0x02 = 50%
wim	32:59c4b8f648d4	2371	// 0x03 = 25%
wim	32:59c4b8f648d4	2372	_writeCommand(0x20 \| _function \| ((~_contrast) >> 4)); // Invert and shift to use 2 MSBs
wim	32:59c4b8f648d4	2373	break;
wim	32:59c4b8f648d4	2374
wim	32:59c4b8f648d4	2375	default:
wim	32:59c4b8f648d4	2376	//Unsupported feature for other controllers
wim	33:900a94bc7585	2377	break;
wim	33:900a94bc7585	2378	} // end switch
wim	33:900a94bc7585	2379	} // end setContrast()
wim	41:111ca62e8a59	2380	#endif
wim	32:59c4b8f648d4	2381
wim	39:e9c2319de9c5	2382	#if(LCD_POWER == 1)
wim	32:59c4b8f648d4	2383	/** Set Power
wim	32:59c4b8f648d4	2384	* setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
wim	32:59c4b8f648d4	2385	*
wim	32:59c4b8f648d4	2386	* @param bool powerOn Power on/off
wim	32:59c4b8f648d4	2387	* @return none
wim	32:59c4b8f648d4	2388	*/
wim	32:59c4b8f648d4	2389	//@TODO Add support for 40x4 dual controller
wim	32:59c4b8f648d4	2390	void TextLCD_Base::setPower(bool powerOn) {
wim	32:59c4b8f648d4	2391
wim	32:59c4b8f648d4	2392	if (powerOn) {
wim	32:59c4b8f648d4	2393	// Switch on
wim	32:59c4b8f648d4	2394	setMode(DispOn);
wim	32:59c4b8f648d4	2395
wim	32:59c4b8f648d4	2396	// Controllers that supports specific Power Down mode
wim	32:59c4b8f648d4	2397	switch (_ctrl) {
wim	32:59c4b8f648d4	2398
wim	32:59c4b8f648d4	2399	// case PCF2113_3V3 :
wim	39:e9c2319de9c5	2400	// case PCF2119_3V3 :
wim	39:e9c2319de9c5	2401	// case PCF2119R_3V3 :
wim	32:59c4b8f648d4	2402	// case ST7032_3V3 :
wim	32:59c4b8f648d4	2403	//@todo
wim	33:900a94bc7585	2404	// enable Booster Bon
wim	33:900a94bc7585	2405
wim	33:900a94bc7585	2406	case WS0010:
wim	33:900a94bc7585	2407	_writeCommand(0x17); // Char mode, DC/DC on
wim	33:900a94bc7585	2408	wait_ms(10); // Wait 10ms to ensure powered up
wim	33:900a94bc7585	2409	break;
wim	33:900a94bc7585	2410
wim	36:9f5f86dfd44a	2411	case KS0073:
wim	33:900a94bc7585	2412	case KS0078:
wim	32:59c4b8f648d4	2413	case SSD1803_3V3 :
wim	32:59c4b8f648d4	2414	// case SSD1803_5V :
wim	33:900a94bc7585	2415	_writeCommand(0x20 \| _function_1); // Select Ext Instr Set
wim	33:900a94bc7585	2416	_writeCommand(0x02); // Power On
wim	32:59c4b8f648d4	2417	_writeCommand(0x20 \| _function); // Select Std Instr Set
wim	32:59c4b8f648d4	2418	break;
wim	32:59c4b8f648d4	2419
wim	32:59c4b8f648d4	2420	default:
wim	32:59c4b8f648d4	2421	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	2422	break;
wim	32:59c4b8f648d4	2423	} // end switch
wim	32:59c4b8f648d4	2424	}
wim	32:59c4b8f648d4	2425	else {
wim	32:59c4b8f648d4	2426	// Switch off
wim	32:59c4b8f648d4	2427	setMode(DispOff);
wim	32:59c4b8f648d4	2428
wim	32:59c4b8f648d4	2429	// Controllers that support specific Power Down mode
wim	32:59c4b8f648d4	2430	switch (_ctrl) {
wim	32:59c4b8f648d4	2431
wim	32:59c4b8f648d4	2432	// case PCF2113_3V3 :
wim	39:e9c2319de9c5	2433	// case PCF2119_3V3 :
wim	39:e9c2319de9c5	2434	// case PCF2119R_3V3 :
wim	32:59c4b8f648d4	2435	// case ST7032_3V3 :
wim	32:59c4b8f648d4	2436	//@todo
wim	33:900a94bc7585	2437	// disable Booster Bon
wim	33:900a94bc7585	2438
wim	33:900a94bc7585	2439	case WS0010:
wim	33:900a94bc7585	2440	_writeCommand(0x13); // Char mode, DC/DC off
wim	33:900a94bc7585	2441	break;
wim	33:900a94bc7585	2442
wim	36:9f5f86dfd44a	2443	case KS0073:
wim	33:900a94bc7585	2444	case KS0078:
wim	32:59c4b8f648d4	2445	case SSD1803_3V3 :
wim	32:59c4b8f648d4	2446	// case SSD1803_5V :
wim	33:900a94bc7585	2447	_writeCommand(0x20 \| _function_1); // Select Ext Instr Set
wim	33:900a94bc7585	2448	_writeCommand(0x03); // Power Down
wim	32:59c4b8f648d4	2449	_writeCommand(0x20 \| _function); // Select Std Instr Set
wim	32:59c4b8f648d4	2450	break;
wim	32:59c4b8f648d4	2451
wim	32:59c4b8f648d4	2452	default:
wim	32:59c4b8f648d4	2453	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	2454	break;
wim	32:59c4b8f648d4	2455	} // end switch
wim	32:59c4b8f648d4	2456	}
wim	33:900a94bc7585	2457	} // end setPower()
wim	39:e9c2319de9c5	2458	#endif
wim	39:e9c2319de9c5	2459
wim	39:e9c2319de9c5	2460	#if(LCD_ORIENT == 1)
wim	33:900a94bc7585	2461	/** Set Orient
wim	33:900a94bc7585	2462	* setOrient method is supported by some compatible devices (eg SSD1803, US2066) that have top/bottom view modes
wim	33:900a94bc7585	2463	*
wim	33:900a94bc7585	2464	* @param LCDOrient orient Orientation
wim	33:900a94bc7585	2465	* @return none
wim	33:900a94bc7585	2466	*/
wim	33:900a94bc7585	2467	void TextLCD_Base::setOrient(LCDOrient orient){
wim	33:900a94bc7585	2468
wim	33:900a94bc7585	2469	switch (orient) {
wim	33:900a94bc7585	2470
wim	33:900a94bc7585	2471	case Top:
wim	33:900a94bc7585	2472	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2473	case PCF2103_3V3:
wim	34:e5a0dcb43ecc	2474	case PCF2116_3V3:
wim	34:e5a0dcb43ecc	2475	case PCF2116_5V:
wim	34:e5a0dcb43ecc	2476	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	34:e5a0dcb43ecc	2477	_writeCommand(0x05); // Display Conf Set 0000 0, 1, P=0, Q=1 (Instr. Set 1)
wim	34:e5a0dcb43ecc	2478	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	34:e5a0dcb43ecc	2479	break;
wim	39:e9c2319de9c5	2480
wim	39:e9c2319de9c5	2481	case PCF2119_3V3:
wim	39:e9c2319de9c5	2482	case PCF2119R_3V3:
wim	39:e9c2319de9c5	2483	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	39:e9c2319de9c5	2484	_writeCommand(0x07); // Display Conf Set 0000 0, 1, P=1, Q=1 (Instr. Set 1)
wim	39:e9c2319de9c5	2485	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	39:e9c2319de9c5	2486	break;
wim	34:e5a0dcb43ecc	2487
wim	33:900a94bc7585	2488	case SSD1803_3V3 :
wim	33:900a94bc7585	2489	// case SSD1803_5V :
wim	33:900a94bc7585	2490	case US2066_3V3 :
wim	33:900a94bc7585	2491	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	2492	// Select Extended Instruction Set
wim	33:900a94bc7585	2493	// _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	2494	_writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	2495
wim	33:900a94bc7585	2496	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	2497	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	2498	break;
wim	36:9f5f86dfd44a	2499
wim	36:9f5f86dfd44a	2500	case ST7070:
wim	36:9f5f86dfd44a	2501	_writeCommand(0x20 \| _function \| 0x04); // Set function, 0 0 1 DL, N, EXT=1, x, x (Select Instr Set = 1)
wim	36:9f5f86dfd44a	2502
wim	36:9f5f86dfd44a	2503	_writeCommand(0x40 \| 0x00); // COM/SEG directions 0 1 0 0 C1, C2, S1, S2 (Instr Set 1)
wim	36:9f5f86dfd44a	2504	// C1=1: Com1-8 -> Com8-1; C2=1: Com9-16 -> Com16-9
wim	36:9f5f86dfd44a	2505	// S1=1: Seg1-40 -> Seg40-1; S2=1: Seg41-80 -> Seg80-41
wim	36:9f5f86dfd44a	2506	wait_ms(5); // Wait to ensure completion or ST7070 fails to set Top/Bottom after reset..
wim	36:9f5f86dfd44a	2507
wim	36:9f5f86dfd44a	2508	_writeCommand(0x20 \| _function); // Set function, EXT=0 (Select Instr Set = 0)
wim	36:9f5f86dfd44a	2509
wim	36:9f5f86dfd44a	2510	break; // case ST7070 Controller
wim	33:900a94bc7585	2511
wim	33:900a94bc7585	2512	default:
wim	33:900a94bc7585	2513	//Unsupported feature for other controllers
wim	33:900a94bc7585	2514	break;
wim	33:900a94bc7585	2515
wim	33:900a94bc7585	2516	} // end switch _ctrl
wim	33:900a94bc7585	2517	break; // end Top
wim	33:900a94bc7585	2518
wim	33:900a94bc7585	2519	case Bottom:
wim	33:900a94bc7585	2520	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2521	case PCF2103_3V3:
wim	34:e5a0dcb43ecc	2522	case PCF2116_3V3:
wim	34:e5a0dcb43ecc	2523	case PCF2116_5V:
wim	34:e5a0dcb43ecc	2524	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	34:e5a0dcb43ecc	2525	_writeCommand(0x06); // Display Conf Set 0000 0, 1, P=1, Q=0 (Instr. Set 1)
wim	34:e5a0dcb43ecc	2526	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	34:e5a0dcb43ecc	2527	break;
wim	39:e9c2319de9c5	2528
wim	39:e9c2319de9c5	2529	case PCF2119_3V3:
wim	39:e9c2319de9c5	2530	case PCF2119R_3V3 :
wim	39:e9c2319de9c5	2531	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	39:e9c2319de9c5	2532	_writeCommand(0x04); // Display Conf Set 0000 0, 1, P=0, Q=0 (Instr. Set 1)
wim	39:e9c2319de9c5	2533	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	39:e9c2319de9c5	2534	break;
wim	34:e5a0dcb43ecc	2535
wim	33:900a94bc7585	2536	case SSD1803_3V3 :
wim	33:900a94bc7585	2537	// case SSD1803_5V :
wim	33:900a94bc7585	2538	case US2066_3V3 :
wim	33:900a94bc7585	2539	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	2540	// Select Extended Instruction Set
wim	33:900a94bc7585	2541	_writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	2542	// _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	2543
wim	33:900a94bc7585	2544	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	2545	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	2546	break;
wim	36:9f5f86dfd44a	2547
wim	36:9f5f86dfd44a	2548	case ST7070:
wim	36:9f5f86dfd44a	2549	//Note: this does not result in correct top/bottom view.
wim	36:9f5f86dfd44a	2550	//The left and right half of each row are reversed and the addressing of both rows is also incorrect:
wim	36:9f5f86dfd44a	2551	//Top/bottomline when orientation is flipped:
wim	36:9f5f86dfd44a	2552	// 0x48...0x4F 0x40...0x47
wim	36:9f5f86dfd44a	2553	// 0x08...0x0F 0x00...0x07
wim	36:9f5f86dfd44a	2554	_writeCommand(0x20 \| _function \| 0x04); // Set function, 0 0 1 DL N EXT=1 x x (Select Instr Set = 1)
wim	36:9f5f86dfd44a	2555
wim	36:9f5f86dfd44a	2556	_writeCommand(0x40 \| 0x0F); // COM/SEG directions 0 1 0 0 C1, C2, S1, S2 (Instr Set 1)
wim	36:9f5f86dfd44a	2557	// C1=1: Com1-8 -> Com8-1; C2=1: Com9-16 -> Com16-9
wim	36:9f5f86dfd44a	2558	// S1=1: Seg1-40 -> Seg40-1; S2=1: Seg41-80 -> Seg80-41
wim	36:9f5f86dfd44a	2559	wait_ms(5); // Wait to ensure completion or ST7070 fails to set Top/Bottom after reset..
wim	36:9f5f86dfd44a	2560
wim	36:9f5f86dfd44a	2561	_writeCommand(0x20 \| _function); // Set function, EXT=0 (Select Instr Set = 0)
wim	36:9f5f86dfd44a	2562
wim	36:9f5f86dfd44a	2563	break; // case ST7070 Controller
wim	33:900a94bc7585	2564
wim	33:900a94bc7585	2565	default:
wim	33:900a94bc7585	2566	//Unsupported feature for other controllers
wim	33:900a94bc7585	2567	break;
wim	33:900a94bc7585	2568
wim	33:900a94bc7585	2569	} // end switch _ctrl
wim	33:900a94bc7585	2570
wim	33:900a94bc7585	2571	break; // end Bottom
wim	33:900a94bc7585	2572	} // end switch orient
wim	33:900a94bc7585	2573	} // end setOrient()
wim	39:e9c2319de9c5	2574	#endif
wim	39:e9c2319de9c5	2575
wim	39:e9c2319de9c5	2576	#if(LCD_BIGFONT == 1)
wim	34:e5a0dcb43ecc	2577	/** Set Big Font
wim	34:e5a0dcb43ecc	2578	* setBigFont method is supported by some compatible devices (eg SSD1803, US2066)
wim	34:e5a0dcb43ecc	2579	*
wim	34:e5a0dcb43ecc	2580	* @param lines The selected Big Font lines (None, TopLine, CenterLine, BottomLine, TopBottomLine)
wim	34:e5a0dcb43ecc	2581	* Double height characters can be shown on lines 1+2, 2+3, 3+4 or 1+2 and 3+4
wim	34:e5a0dcb43ecc	2582	* Valid double height lines depend on the LCDs number of rows.
wim	34:e5a0dcb43ecc	2583	*/
wim	34:e5a0dcb43ecc	2584	void TextLCD_Base::setBigFont(LCDBigFont lines) {
wim	34:e5a0dcb43ecc	2585
wim	34:e5a0dcb43ecc	2586	switch (lines) {
wim	34:e5a0dcb43ecc	2587	case None:
wim	34:e5a0dcb43ecc	2588	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2589	case SSD1803_3V3 :
wim	34:e5a0dcb43ecc	2590	case US2066_3V3 :
wim	34:e5a0dcb43ecc	2591	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	34:e5a0dcb43ecc	2592	// Select Extended Instruction Set
wim	34:e5a0dcb43ecc	2593	_writeCommand(0x1C); // Double Height, 0 0 0 1 UD2=1, UD1=1, X, DH'=0 (Ext Instr Set)
wim	34:e5a0dcb43ecc	2594	// Default
wim	34:e5a0dcb43ecc	2595	_function = _function & ~0x04; // Set function, 0 0 1 DL N DH=0 RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2596	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2597	// Select Std Instr set, Select IS=0
wim	34:e5a0dcb43ecc	2598	break; // end US2066
wim	34:e5a0dcb43ecc	2599
wim	34:e5a0dcb43ecc	2600	default:
wim	34:e5a0dcb43ecc	2601	break; // end default
wim	34:e5a0dcb43ecc	2602	} // end switch _ctrl
wim	34:e5a0dcb43ecc	2603	break; // end None
wim	34:e5a0dcb43ecc	2604
wim	34:e5a0dcb43ecc	2605	case TopLine:
wim	34:e5a0dcb43ecc	2606	if (_nr_rows < 2) return; //Sanity check
wim	34:e5a0dcb43ecc	2607
wim	34:e5a0dcb43ecc	2608	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2609	case SSD1803_3V3 :
wim	34:e5a0dcb43ecc	2610	case US2066_3V3 :
wim	34:e5a0dcb43ecc	2611	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	34:e5a0dcb43ecc	2612	// Select Extended Instruction Set
wim	34:e5a0dcb43ecc	2613	_writeCommand(0x1C); // Double Height, 0 0 0 1 UD2=1, UD1=1, X, DH'=0 (Ext Instr Set)
wim	34:e5a0dcb43ecc	2614	// Default
wim	34:e5a0dcb43ecc	2615	_function = _function \| 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2616	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2617	// Select Std Instr set, Select IS=0
wim	34:e5a0dcb43ecc	2618	break; // end US2066, SSD1803
wim	34:e5a0dcb43ecc	2619
wim	34:e5a0dcb43ecc	2620	default:
wim	34:e5a0dcb43ecc	2621	break; // end default
wim	34:e5a0dcb43ecc	2622	} // end switch _ctrl
wim	34:e5a0dcb43ecc	2623	break; // end TopLine
wim	34:e5a0dcb43ecc	2624
wim	34:e5a0dcb43ecc	2625	case CenterLine:
wim	34:e5a0dcb43ecc	2626	if (_nr_rows != 4) return; //Sanity check
wim	34:e5a0dcb43ecc	2627
wim	34:e5a0dcb43ecc	2628	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2629	case SSD1803_3V3 :
wim	34:e5a0dcb43ecc	2630	case US2066_3V3 :
wim	34:e5a0dcb43ecc	2631	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	34:e5a0dcb43ecc	2632	// Select Extended Instruction Set
wim	34:e5a0dcb43ecc	2633	_writeCommand(0x14); // Double Height, 0 0 0 1 UD2=0, UD1=1, X, DH'=0 (Ext Instr Set)
wim	34:e5a0dcb43ecc	2634	// Default
wim	34:e5a0dcb43ecc	2635	_function = _function \| 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2636	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2637	// Select Std Instr set, Select IS=0
wim	34:e5a0dcb43ecc	2638	break; // end US2066, SSD1803
wim	34:e5a0dcb43ecc	2639
wim	34:e5a0dcb43ecc	2640	default:
wim	34:e5a0dcb43ecc	2641	break; // end default
wim	34:e5a0dcb43ecc	2642	} // end switch _ctrl
wim	34:e5a0dcb43ecc	2643	break; // end CenterLine
wim	34:e5a0dcb43ecc	2644
wim	34:e5a0dcb43ecc	2645	case BottomLine:
wim	34:e5a0dcb43ecc	2646	if (_nr_rows < 3) return; //Sanity check
wim	34:e5a0dcb43ecc	2647
wim	34:e5a0dcb43ecc	2648	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2649	case SSD1803_3V3 :
wim	34:e5a0dcb43ecc	2650	case US2066_3V3 :
wim	34:e5a0dcb43ecc	2651	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	34:e5a0dcb43ecc	2652	// Select Extended Instruction Set
wim	34:e5a0dcb43ecc	2653	if (_nr_rows == 3) {
wim	34:e5a0dcb43ecc	2654	_writeCommand(0x14); // Double Height, 0 0 0 1 UD2=0, UD1=1, X, DH'=0 (Ext Instr Set)
wim	34:e5a0dcb43ecc	2655	}
wim	34:e5a0dcb43ecc	2656	else {
wim	34:e5a0dcb43ecc	2657	_writeCommand(0x10); // Double Height, 0 0 0 1 UD2=0, UD1=0, X, DH'=0 (Ext Instr Set)
wim	34:e5a0dcb43ecc	2658	}
wim	34:e5a0dcb43ecc	2659	_function = _function \| 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2660	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2661	// Select Std Instr set, Select IS=0
wim	34:e5a0dcb43ecc	2662	break; // end US2066, SSD1803
wim	34:e5a0dcb43ecc	2663
wim	34:e5a0dcb43ecc	2664	default:
wim	34:e5a0dcb43ecc	2665	break; // end default
wim	34:e5a0dcb43ecc	2666	} // end switch _ctrl
wim	34:e5a0dcb43ecc	2667	break; // end BottomLine
wim	34:e5a0dcb43ecc	2668
wim	34:e5a0dcb43ecc	2669	case TopBottomLine:
wim	34:e5a0dcb43ecc	2670	if (_nr_rows != 4) return; //Sanity check
wim	34:e5a0dcb43ecc	2671
wim	34:e5a0dcb43ecc	2672	switch (_ctrl) {
wim	34:e5a0dcb43ecc	2673	case SSD1803_3V3 :
wim	34:e5a0dcb43ecc	2674	case US2066_3V3 :
wim	34:e5a0dcb43ecc	2675	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	34:e5a0dcb43ecc	2676	// Select Extended Instruction Set
wim	34:e5a0dcb43ecc	2677	_writeCommand(0x18); // Double Height, 0 0 0 1 UD2=1, UD1=0, X, DH'=0 (Ext Instr Set)
wim	34:e5a0dcb43ecc	2678	// Default
wim	34:e5a0dcb43ecc	2679	_function = _function \| 0x04; // Set function, 0 0 1 DL N DH=1 RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2680	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	34:e5a0dcb43ecc	2681	// Select Std Instr set, Select IS=0
wim	34:e5a0dcb43ecc	2682	break; // end US2066, SSD1803
wim	34:e5a0dcb43ecc	2683
wim	34:e5a0dcb43ecc	2684	default:
wim	34:e5a0dcb43ecc	2685	break; // end default
wim	34:e5a0dcb43ecc	2686	} // end switch _ctrl
wim	34:e5a0dcb43ecc	2687	break; // end TopBottomLine
wim	34:e5a0dcb43ecc	2688
wim	34:e5a0dcb43ecc	2689	} // end switch lines
wim	34:e5a0dcb43ecc	2690
wim	34:e5a0dcb43ecc	2691	} // end setBigFont()
wim	39:e9c2319de9c5	2692	#endif
wim	39:e9c2319de9c5	2693
wim	41:111ca62e8a59	2694
wim	41:111ca62e8a59	2695	#if (LCD_FONTSEL == 1)
wim	41:111ca62e8a59	2696	/** Set Font
wim	41:111ca62e8a59	2697	* setFont method is supported by some compatible devices (eg SSD1803, US2066, ST7070)
wim	41:111ca62e8a59	2698	*
wim	41:111ca62e8a59	2699	* @param LCDFont font The selected Font
wim	41:111ca62e8a59	2700	* @return none
wim	41:111ca62e8a59	2701	*
wim	41:111ca62e8a59	2702	* Note: most controllers support only one font and the hardware specific
wim	41:111ca62e8a59	2703	* fonttable is encoded as part of the controller type number (eg PCF21XXC or PCF21XXR).
wim	41:111ca62e8a59	2704	* Some controllers support multiple tables that can only be selected by logic levels on a few pins.
wim	41:111ca62e8a59	2705	* Some controllers also support runtime fontable switching through a specific instruction
wim	41:111ca62e8a59	2706	*/
wim	41:111ca62e8a59	2707	void TextLCD_Base::setFont(LCDFont font) {
wim	41:111ca62e8a59	2708
wim	41:111ca62e8a59	2709	switch (font) {
wim	41:111ca62e8a59	2710	case Font_RA: // UK/EU
wim	41:111ca62e8a59	2711	switch (_ctrl) {
wim	41:111ca62e8a59	2712	case SSD1803_3V3 :
wim	41:111ca62e8a59	2713	case US2066_3V3 :
wim	41:111ca62e8a59	2714	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	41:111ca62e8a59	2715	// Select Extended Instruction Set
wim	41:111ca62e8a59	2716	_writeCommand(0x72); // ROM Select command, 0 1 1 1 0 0 1 0 (Ext Instr Set)
wim	41:111ca62e8a59	2717	_writeData(0x00); // ROM_0 Select data, 0 0 0 0 ROM2 ROM1 0 0 (Ext Instr Set)
wim	41:111ca62e8a59	2718
wim	41:111ca62e8a59	2719	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS (Std Instr Set)
wim	41:111ca62e8a59	2720
wim	41:111ca62e8a59	2721	_font = font; // Save active font
wim	41:111ca62e8a59	2722	break; // end SSD1803, US2066
wim	41:111ca62e8a59	2723
wim	41:111ca62e8a59	2724	case ST7070:
wim	41:111ca62e8a59	2725	//ST7070 does not support Cursorblink. The P bit selects the font instead !
wim	41:111ca62e8a59	2726	_writeCommand(0x08 \| _currentMode \| (_currentCursor & 0x02));
wim	41:111ca62e8a59	2727
wim	41:111ca62e8a59	2728	_font = font; // Save active font
wim	41:111ca62e8a59	2729	break; // end ST7070
wim	41:111ca62e8a59	2730
wim	41:111ca62e8a59	2731	default:
wim	41:111ca62e8a59	2732	break; // end default
wim	41:111ca62e8a59	2733	} // end switch _ctrl
wim	41:111ca62e8a59	2734	break; // end Font_RA
wim	41:111ca62e8a59	2735
wim	41:111ca62e8a59	2736	case Font_RB: // UK/CYR
wim	41:111ca62e8a59	2737	switch (_ctrl) {
wim	41:111ca62e8a59	2738	case SSD1803_3V3 :
wim	41:111ca62e8a59	2739	case US2066_3V3 :
wim	41:111ca62e8a59	2740	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	41:111ca62e8a59	2741	// Select Extended Instruction Set
wim	41:111ca62e8a59	2742	_writeCommand(0x72); // ROM Select command, 0 1 1 1 0 0 1 0 (Ext Instr Set)
wim	41:111ca62e8a59	2743	_writeData(0x04); // ROM_0 Select data, 0 0 0 0 ROM2 ROM1 0 0 (Ext Instr Set)
wim	41:111ca62e8a59	2744
wim	41:111ca62e8a59	2745	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS (Std Instr Set)
wim	41:111ca62e8a59	2746
wim	41:111ca62e8a59	2747	_font = font; // Save active font
wim	41:111ca62e8a59	2748	break; // end SSD1803, US2066
wim	41:111ca62e8a59	2749
wim	41:111ca62e8a59	2750	case ST7070:
wim	41:111ca62e8a59	2751	//ST7070 does not support Cursorblink. The P bit selects the font instead !
wim	41:111ca62e8a59	2752	_writeCommand(0x08 \| _currentMode \| (_currentCursor & 0x02) \| 0x01);
wim	41:111ca62e8a59	2753
wim	41:111ca62e8a59	2754	_font = font; // Save active font
wim	41:111ca62e8a59	2755	break; // end ST7070
wim	41:111ca62e8a59	2756
wim	41:111ca62e8a59	2757	default:
wim	41:111ca62e8a59	2758	break; // end default
wim	41:111ca62e8a59	2759	} // end switch _ctrl
wim	41:111ca62e8a59	2760	break; // end Font_RB
wim	41:111ca62e8a59	2761
wim	41:111ca62e8a59	2762	case Font_0: //Font_O is pretty similar to ROM_C
wim	41:111ca62e8a59	2763	case Font_RC: // UK/JAP
wim	41:111ca62e8a59	2764	switch (_ctrl) {
wim	41:111ca62e8a59	2765	case SSD1803_3V3 :
wim	41:111ca62e8a59	2766	case US2066_3V3 :
wim	41:111ca62e8a59	2767	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	41:111ca62e8a59	2768	// Select Extended Instruction Set
wim	41:111ca62e8a59	2769	_writeCommand(0x72); // ROM Select command, 0 1 1 1 0 0 1 0 (Ext Instr Set)
wim	41:111ca62e8a59	2770	_writeData(0x08); // ROM_0 Select data, 0 0 0 0 ROM2 ROM1 0 0 (Ext Instr Set)
wim	41:111ca62e8a59	2771
wim	41:111ca62e8a59	2772	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS (Std Instr Set)
wim	41:111ca62e8a59	2773
wim	41:111ca62e8a59	2774	_font = font; // Save active font
wim	41:111ca62e8a59	2775	break; // end SSD1803, US2066
wim	41:111ca62e8a59	2776
wim	41:111ca62e8a59	2777	default:
wim	41:111ca62e8a59	2778	break; // end default
wim	41:111ca62e8a59	2779	} // end switch _ctrl
wim	41:111ca62e8a59	2780	break; // end Font_RC
wim	41:111ca62e8a59	2781	} // end switch font
wim	41:111ca62e8a59	2782
wim	41:111ca62e8a59	2783	//SSD1803 seems to screw up cursor position after selecting new font. Restore to make sure...
wim	41:111ca62e8a59	2784	//Set next memoryaddress, make sure cursor blinks at next location
wim	41:111ca62e8a59	2785	int addr = getAddress(_column, _row);
wim	41:111ca62e8a59	2786	_writeCommand(0x80 \| addr);
wim	41:111ca62e8a59	2787
wim	41:111ca62e8a59	2788	}
wim	41:111ca62e8a59	2789	#endif
wim	41:111ca62e8a59	2790
wim	41:111ca62e8a59	2791
wim	39:e9c2319de9c5	2792	#if(LCD_ICON==1)
wim	36:9f5f86dfd44a	2793	/** Set Icons
wim	36:9f5f86dfd44a	2794	*
wim	36:9f5f86dfd44a	2795	* @param unsigned char idx The Index of the icon pattern (0..15) for KS0073 and similar controllers
wim	36:9f5f86dfd44a	2796	* and Index (0..31) for PCF2103 and similar controllers
wim	36:9f5f86dfd44a	2797	* @param unsigned char data The bitpattern for the icons (6 lsb for KS0073 bitpattern (5 lsb for KS0078) and 2 msb for blinkmode)
wim	36:9f5f86dfd44a	2798	* The bitpattern for the PCF2103 icons is 5 lsb (UDC 0..2) and 5 lsb for blinkmode (UDC 4..6)
wim	36:9f5f86dfd44a	2799	*/
wim	36:9f5f86dfd44a	2800	void TextLCD_Base::setIcon(unsigned char idx, unsigned char data) {
wim	36:9f5f86dfd44a	2801	// Blinking icons are enabled when a specific controlbit (BE) is set.
wim	36:9f5f86dfd44a	2802	// The blinking pixels in the icons can be controlled by setting additional bits in the icon bitpattern.
wim	36:9f5f86dfd44a	2803	// Icons are defined by a byte bitpattern. The P0..P5 form the Icon pattern for KS0073, and P0..P4 for KS0078
wim	36:9f5f86dfd44a	2804	// P7 P6 P5 P4 P3 P2 P1 P0
wim	36:9f5f86dfd44a	2805	// 0 B1 B0 0 0 1 1 1 0
wim	36:9f5f86dfd44a	2806	// 1 B1 B0 1 1 0 0 0 1
wim	36:9f5f86dfd44a	2807	// .............
wim	36:9f5f86dfd44a	2808	// 15 B1 B0 1 1 0 0 0 1
wim	36:9f5f86dfd44a	2809	//
wim	36:9f5f86dfd44a	2810	// Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
wim	36:9f5f86dfd44a	2811	// B1 B0 Mode
wim	36:9f5f86dfd44a	2812	// 0 0 No Blinking for this icon row
wim	36:9f5f86dfd44a	2813	// 0 1 Enabled pixels in P5 will blink
wim	36:9f5f86dfd44a	2814	// 1 x Enabled pixels in P0..P5 will blink
wim	36:9f5f86dfd44a	2815	//
wim	36:9f5f86dfd44a	2816	// Note: the PCF2103 and PCF2113 use UDCs to set Icons
wim	36:9f5f86dfd44a	2817	// 3 x 8 rows x 5 bits = 120 bits Icons for Normal pattern (UDC 0..2) and
wim	36:9f5f86dfd44a	2818	// 3 x 8 rows x 5 bits = 120 bits Icons for Blink pattern (UDC 4..6)
wim	36:9f5f86dfd44a	2819	// Note: the PCF2119 uses UDCs to set Icons
wim	36:9f5f86dfd44a	2820	// 4 x 8 rows x 5 bits = 160 bits Icons for Normal pattern (UDC 0..3) and
wim	36:9f5f86dfd44a	2821	// 4 x 8 rows x 5 bits = 160 bits Icons for Blink pattern (UDC 4..7)
wim	36:9f5f86dfd44a	2822
wim	36:9f5f86dfd44a	2823	switch (_ctrl) {
wim	36:9f5f86dfd44a	2824	case KS0073:
wim	36:9f5f86dfd44a	2825	case KS0078:
wim	36:9f5f86dfd44a	2826	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N RE(1) BE LP
wim	36:9f5f86dfd44a	2827	// Select Extended Instruction Set
wim	36:9f5f86dfd44a	2828	_writeCommand(0x40 \| (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Ext Instr Set)
wim	36:9f5f86dfd44a	2829
wim	36:9f5f86dfd44a	2830	_writeData(data); // Set Icon pattern (Ext Instr Set)
wim	36:9f5f86dfd44a	2831
wim	36:9f5f86dfd44a	2832	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Instruction Set 0
wim	36:9f5f86dfd44a	2833	// Select Std Instr set, Select IS=0
wim	36:9f5f86dfd44a	2834	break; // end KS0073, KS0078
wim	36:9f5f86dfd44a	2835
wim	36:9f5f86dfd44a	2836	case ST7032_3V3:
wim	36:9f5f86dfd44a	2837	case ST7032_5V:
wim	41:111ca62e8a59	2838	case SPLC792A_3V3:
wim	36:9f5f86dfd44a	2839	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
wim	36:9f5f86dfd44a	2840	_writeCommand(0x40 \| (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Instr Set 1)
wim	36:9f5f86dfd44a	2841
wim	36:9f5f86dfd44a	2842	_writeData(data & 0x1F); // Set Icon pattern, no blink support (Instr Set 1)
wim	36:9f5f86dfd44a	2843
wim	36:9f5f86dfd44a	2844	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Instruction Set 0
wim	36:9f5f86dfd44a	2845	// Select Std Instr set, Select IS=0
wim	36:9f5f86dfd44a	2846	break; // end ST7032
wim	36:9f5f86dfd44a	2847
wim	36:9f5f86dfd44a	2848	case ST7036_3V3:
wim	36:9f5f86dfd44a	2849	case ST7036_5V:
wim	36:9f5f86dfd44a	2850	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH IS2,IS1 = 01 (Select Instr Set = 1)
wim	36:9f5f86dfd44a	2851	_writeCommand(0x40 \| (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Instr Set 1)
wim	36:9f5f86dfd44a	2852
wim	36:9f5f86dfd44a	2853	_writeData(data & 0x1F); // Set Icon pattern, no blink support (Instr Set 1)
wim	36:9f5f86dfd44a	2854
wim	36:9f5f86dfd44a	2855	_writeCommand(0x20 \| _function); // Set function, IS2,IS1 = 00 (Select Instr Set = 0)
wim	36:9f5f86dfd44a	2856	// Select Std Instr set, Select IS=0
wim	36:9f5f86dfd44a	2857	break; // end ST7036
wim	36:9f5f86dfd44a	2858
wim	36:9f5f86dfd44a	2859	case SSD1803_3V3:
wim	36:9f5f86dfd44a	2860	// case SSD1803_5V:
wim	36:9f5f86dfd44a	2861	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH RE(0) IS
wim	36:9f5f86dfd44a	2862	// Select Instruction Set 1
wim	36:9f5f86dfd44a	2863	_writeCommand(0x40 \| (idx & 0x0F)); // Set Icon Address, mask Address to valid range (Instr Set = 1)
wim	36:9f5f86dfd44a	2864	_writeData(data); // Set Icon pattern (Instr Set = 1)
wim	36:9f5f86dfd44a	2865
wim	36:9f5f86dfd44a	2866	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS
wim	36:9f5f86dfd44a	2867	// Select IS=0
wim	36:9f5f86dfd44a	2868	break; // end SSD1803
wim	36:9f5f86dfd44a	2869
wim	36:9f5f86dfd44a	2870	case PCF2103_3V3:
wim	36:9f5f86dfd44a	2871	case PCF2113_3V3:
wim	39:e9c2319de9c5	2872	case PCF2119_3V3:
wim	39:e9c2319de9c5	2873	case PCF2119R_3V3:
wim	36:9f5f86dfd44a	2874	// Store UDC/Icon pattern for PCF2103 and PCF2113:
wim	36:9f5f86dfd44a	2875	// 3 x 8 rows x 5 bits = 120 bits for Normal pattern (UDC 0..2) and
wim	36:9f5f86dfd44a	2876	// 3 x 8 rows x 5 bits = 120 bits for Blink pattern (UDC 4..6)
wim	36:9f5f86dfd44a	2877	// Store UDC/Icon pattern for PCF2119:
wim	36:9f5f86dfd44a	2878	// 4 x 8 rows x 5 bits = 160 bits for Normal pattern (UDC 0..3) and
wim	36:9f5f86dfd44a	2879	// 4 x 8 rows x 5 bits = 160 bits for Blink pattern (UDC 4..7)
wim	36:9f5f86dfd44a	2880	_writeCommand(0x40 \| (idx & 0x3F)); //Set CG-RAM address, 8 sequential locations needed per UDC
wim	36:9f5f86dfd44a	2881	_writeData(data); // Set Icon pattern (Instr Set = 1)
wim	36:9f5f86dfd44a	2882	break; // case PCF2103_3V3 Controller
wim	36:9f5f86dfd44a	2883
wim	36:9f5f86dfd44a	2884	default:
wim	36:9f5f86dfd44a	2885	break; // end default
wim	36:9f5f86dfd44a	2886	} // end switch _ctrl
wim	36:9f5f86dfd44a	2887
wim	36:9f5f86dfd44a	2888	//Select DD RAM again for current LCD controller and restore the addresspointer
wim	36:9f5f86dfd44a	2889	int addr = getAddress(_column, _row);
wim	36:9f5f86dfd44a	2890	_writeCommand(0x80 \| addr);
wim	36:9f5f86dfd44a	2891
wim	36:9f5f86dfd44a	2892	} // end setIcon()
wim	36:9f5f86dfd44a	2893
wim	36:9f5f86dfd44a	2894	/** Clear Icons
wim	36:9f5f86dfd44a	2895	*
wim	36:9f5f86dfd44a	2896	* @param none
wim	36:9f5f86dfd44a	2897	* @return none
wim	36:9f5f86dfd44a	2898	*/
wim	36:9f5f86dfd44a	2899	//@TODO Add support for 40x4 dual controller
wim	36:9f5f86dfd44a	2900	void TextLCD_Base::clrIcon() {
wim	36:9f5f86dfd44a	2901	// Icons are defined by a byte bitpattern. The P0..P5 form the Icon pattern for KS0073, and P0..P4 for KS0078
wim	36:9f5f86dfd44a	2902	// P7 P6 P5 P4 P3 P2 P1 P0
wim	36:9f5f86dfd44a	2903	// 0 B1 B0 0 0 0 0 0 0
wim	36:9f5f86dfd44a	2904	// 1 B1 B0 0 0 0 0 0 0
wim	36:9f5f86dfd44a	2905	// .............
wim	36:9f5f86dfd44a	2906	// 15 B1 B0 0 0 0 0 0 0
wim	36:9f5f86dfd44a	2907	//
wim	36:9f5f86dfd44a	2908	// Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
wim	36:9f5f86dfd44a	2909	// B1 B0 Mode
wim	36:9f5f86dfd44a	2910	// 0 0 No Blinking for this icon row
wim	36:9f5f86dfd44a	2911	// 0 1 Enabled pixels in P5 will blink
wim	36:9f5f86dfd44a	2912	// 1 x Enabled pixels in P0..P5 will blink
wim	36:9f5f86dfd44a	2913	//
wim	36:9f5f86dfd44a	2914	// Note: the PCF2103 and PCF2113 use UDCs to set Icons
wim	36:9f5f86dfd44a	2915	// 3 x 8 rows x 5 bits = 120 bits Icons for Normal pattern (UDC 0..2) and
wim	36:9f5f86dfd44a	2916	// 3 x 8 rows x 5 bits = 120 bits Icons for Blink pattern (UDC 4..6)
wim	36:9f5f86dfd44a	2917	// Note: the PCF2119 uses UDCs to set Icons
wim	36:9f5f86dfd44a	2918	// 4 x 8 rows x 5 bits = 160 bits Icons for Normal pattern (UDC 0..3) and
wim	36:9f5f86dfd44a	2919	// 4 x 8 rows x 5 bits = 160 bits Icons for Blink pattern (UDC 4..7)
wim	36:9f5f86dfd44a	2920	int idx;
wim	36:9f5f86dfd44a	2921
wim	36:9f5f86dfd44a	2922	switch (_ctrl) {
wim	36:9f5f86dfd44a	2923	case KS0073:
wim	36:9f5f86dfd44a	2924	case KS0078:
wim	36:9f5f86dfd44a	2925	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N RE(1) BE LP
wim	36:9f5f86dfd44a	2926	// Select Extended Instruction Set
wim	36:9f5f86dfd44a	2927	for (idx=0; idx<16; idx++) {
wim	36:9f5f86dfd44a	2928	_writeCommand(0x40 \| idx); // Set Icon Address, mask Address to valid range (Ext Instr Set)
wim	36:9f5f86dfd44a	2929	_writeData(0x00); // Clear Icon pattern (Ext Instr Set)
wim	36:9f5f86dfd44a	2930	}
wim	36:9f5f86dfd44a	2931	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Std Instruction Set
wim	36:9f5f86dfd44a	2932	// Select Std Instr set
wim	36:9f5f86dfd44a	2933	break; // end KS0073, KS0078
wim	36:9f5f86dfd44a	2934
wim	36:9f5f86dfd44a	2935	case ST7032_3V3:
wim	36:9f5f86dfd44a	2936	case ST7032_5V:
wim	41:111ca62e8a59	2937	case SPLC792A_3V3:
wim	36:9f5f86dfd44a	2938	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
wim	36:9f5f86dfd44a	2939
wim	36:9f5f86dfd44a	2940	for (idx=0; idx<16; idx++) {
wim	36:9f5f86dfd44a	2941	_writeCommand(0x40 \| idx); // Set Icon Address, mask Address to valid range (Instr Set 1)
wim	36:9f5f86dfd44a	2942	_writeData(0x00); // Clear Icon pattern (Instr Set 1)
wim	36:9f5f86dfd44a	2943	}
wim	36:9f5f86dfd44a	2944
wim	36:9f5f86dfd44a	2945	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N RE(0) DH REV Select Instruction Set 0
wim	36:9f5f86dfd44a	2946	// Select Std Instr set, Select IS=0
wim	36:9f5f86dfd44a	2947	break; // end ST7032
wim	36:9f5f86dfd44a	2948
wim	36:9f5f86dfd44a	2949	case ST7036_3V3:
wim	36:9f5f86dfd44a	2950	case ST7036_5V:
wim	36:9f5f86dfd44a	2951	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH IS2,IS1 = 01 (Select Instr Set = 1)
wim	36:9f5f86dfd44a	2952
wim	36:9f5f86dfd44a	2953	for (idx=0; idx<16; idx++) {
wim	36:9f5f86dfd44a	2954	_writeCommand(0x40 \| idx); // Set Icon Address, mask Address to valid range (Instr Set 1)
wim	36:9f5f86dfd44a	2955	_writeData(0x00); // Clear Icon pattern (Instr Set 1)
wim	36:9f5f86dfd44a	2956	}
wim	36:9f5f86dfd44a	2957
wim	36:9f5f86dfd44a	2958	_writeCommand(0x20 \| _function); // Set function, IS2,IS1 = 00 (Select Instr Set = 0)
wim	36:9f5f86dfd44a	2959	// Select Std Instr set, Select IS=0
wim	36:9f5f86dfd44a	2960	break; // end ST7036
wim	36:9f5f86dfd44a	2961
wim	36:9f5f86dfd44a	2962	case SSD1803_3V3:
wim	36:9f5f86dfd44a	2963	// case SSD1803_5V:
wim	36:9f5f86dfd44a	2964	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH RE(0) IS
wim	36:9f5f86dfd44a	2965	// Select Instruction Set 1
wim	36:9f5f86dfd44a	2966	for (idx=0; idx<16; idx++) {
wim	36:9f5f86dfd44a	2967	_writeCommand(0x40 \| idx); // Set Icon Address, mask Address to valid range (Ext Instr Set)
wim	36:9f5f86dfd44a	2968	_writeData(0x00); // Clear Icon pattern (Ext Instr Set)
wim	36:9f5f86dfd44a	2969	}
wim	36:9f5f86dfd44a	2970	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS
wim	36:9f5f86dfd44a	2971	// Select IS=0
wim	36:9f5f86dfd44a	2972	break; // end SSD1803
wim	36:9f5f86dfd44a	2973
wim	36:9f5f86dfd44a	2974	case PCF2103_3V3:
wim	36:9f5f86dfd44a	2975	case PCF2113_3V3:
wim	36:9f5f86dfd44a	2976	// PCF2103 and PCF2113 use part of the UDC RAM to control Icons
wim	36:9f5f86dfd44a	2977	// Select CG RAM
wim	36:9f5f86dfd44a	2978
wim	36:9f5f86dfd44a	2979	_writeCommand(0x40 \| (0 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
wim	36:9f5f86dfd44a	2980	// Store UDC/Icon pattern:
wim	36:9f5f86dfd44a	2981	// 3 x 8 rows x 5 bits = 120 bits for Normal pattern (UDC 0..2) and
wim	36:9f5f86dfd44a	2982	for (int i=0; i<(3 * 8); i++) {
wim	36:9f5f86dfd44a	2983	// _writeData(0x1F); // All On
wim	36:9f5f86dfd44a	2984	_writeData(0x00); // All Off
wim	36:9f5f86dfd44a	2985	}
wim	36:9f5f86dfd44a	2986
wim	36:9f5f86dfd44a	2987	_writeCommand(0x40 \| (4 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
wim	36:9f5f86dfd44a	2988	// 3 x 8 rows x 5 bits = 120 bits for Blink pattern (UDC 4..6)
wim	36:9f5f86dfd44a	2989	for (int i=0; i<(3 * 8); i++) {
wim	36:9f5f86dfd44a	2990	// _writeData(0x1F); // All On
wim	36:9f5f86dfd44a	2991	_writeData(0x00); // All Off
wim	36:9f5f86dfd44a	2992	}
wim	36:9f5f86dfd44a	2993	break; // case PCF2103_3V3 Controller
wim	36:9f5f86dfd44a	2994
wim	39:e9c2319de9c5	2995	case PCF2119_3V3:
wim	39:e9c2319de9c5	2996	case PCF2119R_3V3:
wim	36:9f5f86dfd44a	2997	// PCF2119 uses part of the UDC RAM to control Icons
wim	36:9f5f86dfd44a	2998	// Select CG RAM
wim	36:9f5f86dfd44a	2999
wim	36:9f5f86dfd44a	3000	_writeCommand(0x40 \| (0 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
wim	36:9f5f86dfd44a	3001	// Store UDC/Icon pattern:
wim	36:9f5f86dfd44a	3002	// 4 x 8 rows x 5 bits = 160 bits for Normal pattern (UDC 0..3) and
wim	36:9f5f86dfd44a	3003	for (int i=0; i<(4 * 8); i++) {
wim	36:9f5f86dfd44a	3004	// _writeData(0x1F); // All On
wim	36:9f5f86dfd44a	3005	_writeData(0x00); // All Off
wim	36:9f5f86dfd44a	3006	}
wim	36:9f5f86dfd44a	3007
wim	36:9f5f86dfd44a	3008	_writeCommand(0x40 \| (4 * 8)); //Set CG-RAM address, 8 sequential locations needed per UDC
wim	36:9f5f86dfd44a	3009	// 4 x 8 rows x 5 bits = 160 bits for Blink pattern (UDC 4..7)
wim	36:9f5f86dfd44a	3010	for (int i=0; i<(4 * 8); i++) {
wim	36:9f5f86dfd44a	3011	// _writeData(0x1F); // All On
wim	36:9f5f86dfd44a	3012	_writeData(0x00); // All Off
wim	36:9f5f86dfd44a	3013	}
wim	36:9f5f86dfd44a	3014	break; // case PCF2119_3V3 Controller
wim	36:9f5f86dfd44a	3015
wim	36:9f5f86dfd44a	3016	default:
wim	36:9f5f86dfd44a	3017	break; // end default
wim	36:9f5f86dfd44a	3018	} // end switch _ctrl
wim	36:9f5f86dfd44a	3019
wim	36:9f5f86dfd44a	3020	//Select DD RAM again for current LCD controller and restore the addresspointer
wim	36:9f5f86dfd44a	3021	int addr = getAddress(_column, _row);
wim	36:9f5f86dfd44a	3022	_writeCommand(0x80 \| addr);
wim	36:9f5f86dfd44a	3023	} //end clrIcon()
wim	39:e9c2319de9c5	3024	#endif
wim	39:e9c2319de9c5	3025
wim	39:e9c2319de9c5	3026	#if(LCD_INVERT == 1)
wim	36:9f5f86dfd44a	3027	/** Set Invert
wim	36:9f5f86dfd44a	3028	* setInvert method is supported by some compatible devices (eg KS0073) to swap between black and white
wim	36:9f5f86dfd44a	3029	*
wim	36:9f5f86dfd44a	3030	* @param bool invertOn Invert on/off
wim	36:9f5f86dfd44a	3031	* @return none
wim	36:9f5f86dfd44a	3032	*/
wim	36:9f5f86dfd44a	3033	//@TODO Add support for 40x4 dual controller
wim	36:9f5f86dfd44a	3034	void TextLCD_Base::setInvert(bool invertOn) {
wim	36:9f5f86dfd44a	3035
wim	36:9f5f86dfd44a	3036	if (invertOn) {
wim	36:9f5f86dfd44a	3037	// Controllers that support Invert
wim	36:9f5f86dfd44a	3038	switch (_ctrl) {
wim	36:9f5f86dfd44a	3039	case KS0073:
wim	36:9f5f86dfd44a	3040	case KS0078:
wim	36:9f5f86dfd44a	3041	_function = _function \| 0x01; // Enable Invert
wim	36:9f5f86dfd44a	3042	_writeCommand(0x20 \| _function); // Activate Invert (Std Instr Set)
wim	36:9f5f86dfd44a	3043	break;
wim	36:9f5f86dfd44a	3044	case SSD1803_3V3 :
wim	36:9f5f86dfd44a	3045	// case SSD1803_5V :
wim	36:9f5f86dfd44a	3046	case US2066_3V3:
wim	36:9f5f86dfd44a	3047	// case USS2066_5V:
wim	36:9f5f86dfd44a	3048	_function_1 = _function_1 \| 0x01; // Enable Invert
wim	36:9f5f86dfd44a	3049	// Set function, 0 0 1 DL N BE RE(1) REV (SSD1803)
wim	36:9f5f86dfd44a	3050	// Set function, 0 0 1 X N BE RE(1) REV (US2066)
wim	36:9f5f86dfd44a	3051	_writeCommand(0x20 \| _function_1); // Activate Invert (Ext Instr Set)
wim	36:9f5f86dfd44a	3052	_writeCommand(0x20 \| _function); // Return to Std Instr Set
wim	36:9f5f86dfd44a	3053	break;
wim	36:9f5f86dfd44a	3054	default:
wim	36:9f5f86dfd44a	3055	//Unsupported feature for other controllers
wim	36:9f5f86dfd44a	3056	break;
wim	36:9f5f86dfd44a	3057	} // end switch
wim	36:9f5f86dfd44a	3058	}
wim	36:9f5f86dfd44a	3059	else {
wim	36:9f5f86dfd44a	3060	// Controllers that support Invert
wim	36:9f5f86dfd44a	3061	switch (_ctrl) {
wim	36:9f5f86dfd44a	3062	case KS0073:
wim	36:9f5f86dfd44a	3063	case KS0078:
wim	36:9f5f86dfd44a	3064	_function = _function & ~0x01; // Disable Invert
wim	36:9f5f86dfd44a	3065	_writeCommand(0x20 \| _function); // Disable Invert (Std Instr Set)
wim	36:9f5f86dfd44a	3066	break;
wim	36:9f5f86dfd44a	3067	case SSD1803_3V3 :
wim	36:9f5f86dfd44a	3068	// case SSD1803_5V :
wim	36:9f5f86dfd44a	3069	case US2066_3V3:
wim	36:9f5f86dfd44a	3070	// case USS2066_5V:
wim	36:9f5f86dfd44a	3071	_function_1 = _function_1 & ~0x01; // Disable Invert
wim	36:9f5f86dfd44a	3072	// Set function, 0 0 1 DL N BE RE(1) REV (SSD1803)
wim	36:9f5f86dfd44a	3073	// Set function, 0 0 1 X N BE RE(1) REV (US2066)
wim	36:9f5f86dfd44a	3074	_writeCommand(0x20 \| _function_1); // Activate Invert (Ext Instr Set)
wim	36:9f5f86dfd44a	3075	_writeCommand(0x20 \| _function); // Return to Std Instr Set
wim	36:9f5f86dfd44a	3076	break;
wim	36:9f5f86dfd44a	3077
wim	36:9f5f86dfd44a	3078	default:
wim	36:9f5f86dfd44a	3079	//Unsupported feature for other controllers
wim	36:9f5f86dfd44a	3080	break;
wim	36:9f5f86dfd44a	3081	} // end switch
wim	36:9f5f86dfd44a	3082	}
wim	36:9f5f86dfd44a	3083	} // end setInvert()
wim	39:e9c2319de9c5	3084	#endif
wim	36:9f5f86dfd44a	3085
wim	23:d47f226efb24	3086	//--------- End TextLCD_Base -----------
wim	21:9eb628d9e164	3087
wim	22:35742ec80c24	3088
wim	23:d47f226efb24	3089	//--------- Start TextLCD Bus -----------
wim	21:9eb628d9e164	3090
wim	21:9eb628d9e164	3091	/* Create a TextLCD interface for using regular mbed pins
wim	21:9eb628d9e164	3092	*
wim	21:9eb628d9e164	3093	* @param rs Instruction/data control line
wim	21:9eb628d9e164	3094	* @param e Enable line (clock)
wim	21:9eb628d9e164	3095	* @param d4-d7 Data lines for using as a 4-bit interface
wim	21:9eb628d9e164	3096	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	3097	* @param bl Backlight control line (optional, default = NC)
wim	21:9eb628d9e164	3098	* @param e2 Enable2 line (clock for second controller, LCD40x4 only)
wim	21:9eb628d9e164	3099	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	3100	*/
wim	21:9eb628d9e164	3101	TextLCD::TextLCD(PinName rs, PinName e,
wim	21:9eb628d9e164	3102	PinName d4, PinName d5, PinName d6, PinName d7,
wim	21:9eb628d9e164	3103	LCDType type, PinName bl, PinName e2, LCDCtrl ctrl) :
wim	21:9eb628d9e164	3104	TextLCD_Base(type, ctrl),
wim	22:35742ec80c24	3105	_rs(rs), _e(e), _d(d4, d5, d6, d7) {
wim	22:35742ec80c24	3106
wim	22:35742ec80c24	3107	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	22:35742ec80c24	3108	if (bl != NC) {
wim	22:35742ec80c24	3109	_bl = new DigitalOut(bl); //Construct new pin
wim	22:35742ec80c24	3110	_bl->write(0); //Deactivate
wim	22:35742ec80c24	3111	}
wim	22:35742ec80c24	3112	else {
wim	22:35742ec80c24	3113	// No Hardware Backlight pin
wim	22:35742ec80c24	3114	_bl = NULL; //Construct dummy pin
wim	22:35742ec80c24	3115	}
wim	22:35742ec80c24	3116
wim	22:35742ec80c24	3117	// The hardware Enable2 pin is only needed for LCD40x4. Test and make sure whether it exists or not to prevent illegal access.
wim	22:35742ec80c24	3118	if (e2 != NC) {
wim	22:35742ec80c24	3119	_e2 = new DigitalOut(e2); //Construct new pin
wim	22:35742ec80c24	3120	_e2->write(0); //Deactivate
wim	22:35742ec80c24	3121	}
wim	22:35742ec80c24	3122	else {
wim	22:35742ec80c24	3123	// No Hardware Enable pin
wim	22:35742ec80c24	3124	_e2 = NULL; //Construct dummy pin
wim	22:35742ec80c24	3125	}
wim	38:cbe275b0b647	3126
wim	38:cbe275b0b647	3127	_init(_LCD_DL_4); // Set Datalength to 4 bit for mbed bus interfaces
wim	21:9eb628d9e164	3128	}
wim	21:9eb628d9e164	3129
wim	29:a3663151aa65	3130	/** Destruct a TextLCD interface for using regular mbed pins
wim	29:a3663151aa65	3131	*
wim	29:a3663151aa65	3132	* @param none
wim	29:a3663151aa65	3133	* @return none
wim	29:a3663151aa65	3134	*/
wim	29:a3663151aa65	3135	TextLCD::~TextLCD() {
wim	29:a3663151aa65	3136	if (_bl != NULL) {delete _bl;} // BL pin
wim	29:a3663151aa65	3137	if (_e2 != NULL) {delete _e2;} // E2 pin
wim	29:a3663151aa65	3138	}
wim	29:a3663151aa65	3139
wim	22:35742ec80c24	3140	/** Set E pin (or E2 pin)
wim	22:35742ec80c24	3141	* Used for mbed pins, I2C bus expander or SPI shiftregister
wim	22:35742ec80c24	3142	* Default PinName value for E2 is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	3143	* @param value true or false
wim	22:35742ec80c24	3144	* @return none
wim	22:35742ec80c24	3145	*/
wim	21:9eb628d9e164	3146	void TextLCD::_setEnable(bool value) {
wim	21:9eb628d9e164	3147
wim	22:35742ec80c24	3148	if(_ctrl_idx==_LCDCtrl_0) {
wim	22:35742ec80c24	3149	if (value) {
wim	22:35742ec80c24	3150	_e = 1; // Set E bit
wim	22:35742ec80c24	3151	}
wim	22:35742ec80c24	3152	else {
wim	22:35742ec80c24	3153	_e = 0; // Reset E bit
wim	22:35742ec80c24	3154	}
wim	22:35742ec80c24	3155	}
wim	22:35742ec80c24	3156	else {
wim	22:35742ec80c24	3157	if (value) {
wim	22:35742ec80c24	3158	if (_e2 != NULL) {_e2->write(1);} //Set E2 bit
wim	22:35742ec80c24	3159	}
wim	22:35742ec80c24	3160	else {
wim	22:35742ec80c24	3161	if (_e2 != NULL) {_e2->write(0);} //Reset E2 bit
wim	22:35742ec80c24	3162	}
wim	22:35742ec80c24	3163	}
wim	21:9eb628d9e164	3164	}
wim	21:9eb628d9e164	3165
wim	21:9eb628d9e164	3166	// Set RS pin
wim	21:9eb628d9e164	3167	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	3168	void TextLCD::_setRS(bool value) {
wim	21:9eb628d9e164	3169
wim	22:35742ec80c24	3170	if (value) {
wim	21:9eb628d9e164	3171	_rs = 1; // Set RS bit
wim	22:35742ec80c24	3172	}
wim	22:35742ec80c24	3173	else {
wim	21:9eb628d9e164	3174	_rs = 0; // Reset RS bit
wim	22:35742ec80c24	3175	}
wim	21:9eb628d9e164	3176	}
wim	21:9eb628d9e164	3177
wim	22:35742ec80c24	3178	/** Set BL pin
wim	22:35742ec80c24	3179	* Used for mbed pins, I2C bus expander or SPI shiftregister
wim	22:35742ec80c24	3180	* Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	3181	* @param value true or false
wim	22:35742ec80c24	3182	* @return none
wim	22:35742ec80c24	3183	*/
wim	21:9eb628d9e164	3184	void TextLCD::_setBL(bool value) {
wim	21:9eb628d9e164	3185
wim	22:35742ec80c24	3186	if (value) {
wim	22:35742ec80c24	3187	if (_bl != NULL) {_bl->write(1);} //Set BL bit
wim	22:35742ec80c24	3188	}
wim	22:35742ec80c24	3189	else {
wim	22:35742ec80c24	3190	if (_bl != NULL) {_bl->write(0);} //Reset BL bit
wim	22:35742ec80c24	3191	}
wim	21:9eb628d9e164	3192	}
wim	21:9eb628d9e164	3193
wim	21:9eb628d9e164	3194	// Place the 4bit data on the databus
wim	21:9eb628d9e164	3195	// Used for mbed pins, I2C bus expander or SPI shifregister
wim	21:9eb628d9e164	3196	void TextLCD::_setData(int value) {
wim	21:9eb628d9e164	3197	_d = value & 0x0F; // Write Databits
wim	21:9eb628d9e164	3198	}
wim	34:e5a0dcb43ecc	3199
wim	23:d47f226efb24	3200	//----------- End TextLCD ---------------
wim	21:9eb628d9e164	3201
wim	21:9eb628d9e164	3202
wim	23:d47f226efb24	3203	//--------- Start TextLCD_I2C -----------
wim	34:e5a0dcb43ecc	3204	#if(LCD_I2C == 1) /* I2C Expander PCF8574/MCP23008 */
wim	26:bd897a001012	3205	/** Create a TextLCD interface using an I2C PC8574 (or PCF8574A) or MCP23008 portexpander
wim	22:35742ec80c24	3206	*
wim	22:35742ec80c24	3207	* @param i2c I2C Bus
wim	26:bd897a001012	3208	* @param deviceAddress I2C slave address (PCF8574, PCF8574A or MCP23008, default = 0x40)
wim	22:35742ec80c24	3209	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	22:35742ec80c24	3210	* @param ctrl LCD controller (default = HD44780)
wim	22:35742ec80c24	3211	*/
wim	21:9eb628d9e164	3212	TextLCD_I2C::TextLCD_I2C(I2C *i2c, char deviceAddress, LCDType type, LCDCtrl ctrl) :
wim	21:9eb628d9e164	3213	TextLCD_Base(type, ctrl),
wim	21:9eb628d9e164	3214	_i2c(i2c){
wim	21:9eb628d9e164	3215
wim	22:35742ec80c24	3216	_slaveAddress = deviceAddress & 0xFE;
wim	28:30fa94f7341c	3217
wim	28:30fa94f7341c	3218	// Setup the I2C bus
wim	28:30fa94f7341c	3219	// The max bitrate for PCF8574 is 100kbit, the max bitrate for MCP23008 is 400kbit,
wim	32:59c4b8f648d4	3220	_i2c->frequency(100000);
wim	21:9eb628d9e164	3221
wim	26:bd897a001012	3222	#if (MCP23008==1)
wim	26:bd897a001012	3223	// MCP23008 portexpander Init
wim	37:ce348c002929	3224	_writeRegister(IODIR, 0x00); // All pins are outputs
wim	37:ce348c002929	3225	_writeRegister(IPOL, 0x00); // No reverse polarity on inputs
wim	37:ce348c002929	3226	_writeRegister(GPINTEN, 0x00); // No interrupt on change of input pins
wim	37:ce348c002929	3227	_writeRegister(DEFVAL, 0x00); // Default value to compare against for interrupts
wim	37:ce348c002929	3228	_writeRegister(INTCON, 0x00); // No interrupt on changes, compare against previous pin value
wim	37:ce348c002929	3229	_writeRegister(IOCON, 0x20); // b1=0 - Interrupt polarity active low
wim	37:ce348c002929	3230	// b2=0 - Interrupt pin active driver output
wim	37:ce348c002929	3231	// b4=0 - Slew rate enable on SDA
wim	37:ce348c002929	3232	// b5=0 - Auto-increment on registeraddress
wim	37:ce348c002929	3233	// b5=1 - No auto-increment on registeraddress => needed for performance improved I2C expander mode
wim	37:ce348c002929	3234	_writeRegister(GPPU, 0x00); // No Pullup
wim	37:ce348c002929	3235	// INTF // Interrupt flags read (Read-Only)
wim	37:ce348c002929	3236	// INTCAP // Captured inputpins at time of interrupt (Read-Only)
wim	37:ce348c002929	3237	// _writeRegister(GPIO, 0x00); // Output/Input pins
wim	37:ce348c002929	3238	// _writeRegister(OLAT, 0x00); // Output Latch
wim	26:bd897a001012	3239
wim	21:9eb628d9e164	3240	// Init the portexpander bus
wim	38:cbe275b0b647	3241	_lcd_bus = LCD_BUS_I2C_DEF;
wim	21:9eb628d9e164	3242
wim	21:9eb628d9e164	3243	// write the new data to the portexpander
wim	37:ce348c002929	3244	_writeRegister(GPIO, _lcd_bus);
wim	26:bd897a001012	3245	#else
wim	26:bd897a001012	3246	// PCF8574 of PCF8574A portexpander
wim	26:bd897a001012	3247
wim	26:bd897a001012	3248	// Init the portexpander bus
wim	38:cbe275b0b647	3249	_lcd_bus = LCD_BUS_I2C_DEF;
wim	26:bd897a001012	3250
wim	26:bd897a001012	3251	// write the new data to the portexpander
wim	21:9eb628d9e164	3252	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	3253	#endif
wim	21:9eb628d9e164	3254
wim	37:ce348c002929	3255	_init(_LCD_DL_4); // Set Datalength to 4 bit for all serial expander interfaces
wim	21:9eb628d9e164	3256	}
wim	21:9eb628d9e164	3257
wim	37:ce348c002929	3258	// Set E bit (or E2 bit) in the databus shadowvalue
wim	37:ce348c002929	3259	// Used for mbed I2C bus expander
wim	37:ce348c002929	3260	void TextLCD_I2C::_setEnableBit(bool value) {
wim	21:9eb628d9e164	3261
wim	41:111ca62e8a59	3262	#if (LCD_TWO_CTRL == 1)
wim	22:35742ec80c24	3263	if(_ctrl_idx==_LCDCtrl_0) {
wim	26:bd897a001012	3264	if (value) {
wim	38:cbe275b0b647	3265	_lcd_bus \|= LCD_BUS_I2C_E; // Set E bit
wim	26:bd897a001012	3266	}
wim	26:bd897a001012	3267	else {
wim	38:cbe275b0b647	3268	_lcd_bus &= ~LCD_BUS_I2C_E; // Reset E bit
wim	26:bd897a001012	3269	}
wim	22:35742ec80c24	3270	}
wim	22:35742ec80c24	3271	else {
wim	26:bd897a001012	3272	if (value) {
wim	38:cbe275b0b647	3273	_lcd_bus \|= LCD_BUS_I2C_E2; // Set E2 bit
wim	26:bd897a001012	3274	}
wim	26:bd897a001012	3275	else {
wim	38:cbe275b0b647	3276	_lcd_bus &= ~LCD_BUS_I2C_E2; // Reset E2bit
wim	26:bd897a001012	3277	}
wim	26:bd897a001012	3278	}
wim	41:111ca62e8a59	3279	#else
wim	41:111ca62e8a59	3280	// Support only one controller
wim	41:111ca62e8a59	3281	if (value) {
wim	41:111ca62e8a59	3282	_lcd_bus \|= LCD_BUS_I2C_E; // Set E bit
wim	41:111ca62e8a59	3283	}
wim	41:111ca62e8a59	3284	else {
wim	41:111ca62e8a59	3285	_lcd_bus &= ~LCD_BUS_I2C_E; // Reset E bit
wim	41:111ca62e8a59	3286	}
wim	41:111ca62e8a59	3287
wim	41:111ca62e8a59	3288	#endif
wim	37:ce348c002929	3289	}
wim	37:ce348c002929	3290
wim	37:ce348c002929	3291	// Set E pin (or E2 pin)
wim	37:ce348c002929	3292	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	37:ce348c002929	3293	void TextLCD_I2C::_setEnable(bool value) {
wim	37:ce348c002929	3294
wim	37:ce348c002929	3295	// Place the E or E2 bit data on the databus shadowvalue
wim	37:ce348c002929	3296	_setEnableBit(value);
wim	26:bd897a001012	3297
wim	26:bd897a001012	3298	#if (MCP23008==1)
wim	26:bd897a001012	3299	// MCP23008 portexpander
wim	26:bd897a001012	3300
wim	26:bd897a001012	3301	// write the new data to the portexpander
wim	37:ce348c002929	3302	_writeRegister(GPIO, _lcd_bus);
wim	26:bd897a001012	3303	#else
wim	26:bd897a001012	3304	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	3305
wim	22:35742ec80c24	3306	// write the new data to the I2C portexpander
wim	22:35742ec80c24	3307	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	3308	#endif
wim	21:9eb628d9e164	3309	}
wim	21:9eb628d9e164	3310
wim	37:ce348c002929	3311
wim	21:9eb628d9e164	3312	// Set RS pin
wim	21:9eb628d9e164	3313	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	3314	void TextLCD_I2C::_setRS(bool value) {
wim	21:9eb628d9e164	3315
wim	26:bd897a001012	3316	if (value) {
wim	38:cbe275b0b647	3317	_lcd_bus \|= LCD_BUS_I2C_RS; // Set RS bit
wim	26:bd897a001012	3318	}
wim	26:bd897a001012	3319	else {
wim	38:cbe275b0b647	3320	_lcd_bus &= ~LCD_BUS_I2C_RS; // Reset RS bit
wim	26:bd897a001012	3321	}
wim	26:bd897a001012	3322
wim	26:bd897a001012	3323	#if (MCP23008==1)
wim	26:bd897a001012	3324	// MCP23008 portexpander
wim	26:bd897a001012	3325
wim	26:bd897a001012	3326	// write the new data to the portexpander
wim	37:ce348c002929	3327	_writeRegister(GPIO, _lcd_bus);
wim	26:bd897a001012	3328	#else
wim	26:bd897a001012	3329	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	3330
wim	22:35742ec80c24	3331	// write the new data to the I2C portexpander
wim	22:35742ec80c24	3332	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	30:033048611c01	3333	#endif
wim	21:9eb628d9e164	3334	}
wim	21:9eb628d9e164	3335
wim	21:9eb628d9e164	3336	// Set BL pin
wim	21:9eb628d9e164	3337	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	3338	void TextLCD_I2C::_setBL(bool value) {
wim	21:9eb628d9e164	3339
wim	26:bd897a001012	3340	if (value) {
wim	38:cbe275b0b647	3341	_lcd_bus \|= LCD_BUS_I2C_BL; // Set BL bit
wim	26:bd897a001012	3342	}
wim	26:bd897a001012	3343	else {
wim	38:cbe275b0b647	3344	_lcd_bus &= ~LCD_BUS_I2C_BL; // Reset BL bit
wim	26:bd897a001012	3345	}
wim	26:bd897a001012	3346
wim	26:bd897a001012	3347	#if (MCP23008==1)
wim	26:bd897a001012	3348	// MCP23008 portexpander
wim	26:bd897a001012	3349
wim	26:bd897a001012	3350	// write the new data to the portexpander
wim	37:ce348c002929	3351	_writeRegister(GPIO, _lcd_bus);
wim	37:ce348c002929	3352	#else
wim	37:ce348c002929	3353	// PCF8574 of PCF8574A portexpander
wim	37:ce348c002929	3354
wim	37:ce348c002929	3355	// write the new data to the I2C portexpander
wim	37:ce348c002929	3356	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	37:ce348c002929	3357	#endif
wim	37:ce348c002929	3358	}
wim	37:ce348c002929	3359
wim	38:cbe275b0b647	3360	#if(0)
wim	38:cbe275b0b647	3361	// New optimized v018
wim	38:cbe275b0b647	3362	// Test faster _writeByte 0.11s vs 0.27s for a 20x4 fillscreen (PCF8574), same as v018
wim	38:cbe275b0b647	3363	// Place the 4bit data in the databus shadowvalue
wim	38:cbe275b0b647	3364	// Used for mbed I2C bus expander
wim	38:cbe275b0b647	3365	const char _LCD_DATA_BITS[16] = {
wim	38:cbe275b0b647	3366	0x00,
wim	38:cbe275b0b647	3367	( LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3368	( LCD_BUS_I2C_D5 ),
wim	38:cbe275b0b647	3369	( LCD_BUS_I2C_D5 \| LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3370	( LCD_BUS_I2C_D6 ),
wim	38:cbe275b0b647	3371	( LCD_BUS_I2C_D6 \| LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3372	( LCD_BUS_I2C_D6 \| LCD_BUS_I2C_D5 ),
wim	38:cbe275b0b647	3373	( LCD_BUS_I2C_D6 \| LCD_BUS_I2C_D5 \| LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3374	(LCD_BUS_I2C_D7 ),
wim	38:cbe275b0b647	3375	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3376	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D5 ),
wim	38:cbe275b0b647	3377	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D5 \| LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3378	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D6 ),
wim	38:cbe275b0b647	3379	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D6 \| LCD_BUS_I2C_D4),
wim	38:cbe275b0b647	3380	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D6 \| LCD_BUS_I2C_D5 ),
wim	38:cbe275b0b647	3381	(LCD_BUS_I2C_D7 \| LCD_BUS_I2C_D6 \| LCD_BUS_I2C_D5 \| LCD_BUS_I2C_D4)
wim	38:cbe275b0b647	3382	};
wim	38:cbe275b0b647	3383	void TextLCD_I2C::_setDataBits(int value) {
wim	38:cbe275b0b647	3384
wim	38:cbe275b0b647	3385	//Clear all databits
wim	38:cbe275b0b647	3386	_lcd_bus &= ~LCD_BUS_I2C_MSK;
wim	38:cbe275b0b647	3387
wim	38:cbe275b0b647	3388	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	38:cbe275b0b647	3389	_lcd_bus \|= _LCD_DATA_BITS[value & 0x0F];
wim	38:cbe275b0b647	3390	}
wim	39:e9c2319de9c5	3391	#endif
wim	39:e9c2319de9c5	3392
wim	39:e9c2319de9c5	3393	// Test faster _writeByte 0.11s vs 0.27s for a 20x4 fillscreen (PCF8574)
wim	39:e9c2319de9c5	3394	// Place the 4bit data in the databus shadowvalue
wim	39:e9c2319de9c5	3395	// Used for mbed I2C bus expander
wim	39:e9c2319de9c5	3396	void TextLCD_I2C::_setDataBits(int value) {
wim	39:e9c2319de9c5	3397
wim	39:e9c2319de9c5	3398	//Clear all databits
wim	39:e9c2319de9c5	3399	_lcd_bus &= ~LCD_BUS_I2C_MSK;
wim	39:e9c2319de9c5	3400
wim	39:e9c2319de9c5	3401	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	39:e9c2319de9c5	3402	if (value & 0x01){
wim	39:e9c2319de9c5	3403	_lcd_bus \|= LCD_BUS_I2C_D4; // Set Databit
wim	39:e9c2319de9c5	3404	}
wim	39:e9c2319de9c5	3405
wim	39:e9c2319de9c5	3406	if (value & 0x02){
wim	39:e9c2319de9c5	3407	_lcd_bus \|= LCD_BUS_I2C_D5; // Set Databit
wim	39:e9c2319de9c5	3408	}
wim	39:e9c2319de9c5	3409
wim	39:e9c2319de9c5	3410	if (value & 0x04) {
wim	39:e9c2319de9c5	3411	_lcd_bus \|= LCD_BUS_I2C_D6; // Set Databit
wim	39:e9c2319de9c5	3412	}
wim	39:e9c2319de9c5	3413
wim	39:e9c2319de9c5	3414	if (value & 0x08) {
wim	39:e9c2319de9c5	3415	_lcd_bus \|= LCD_BUS_I2C_D7; // Set Databit
wim	39:e9c2319de9c5	3416	}
wim	39:e9c2319de9c5	3417	}
wim	41:111ca62e8a59	3418
wim	37:ce348c002929	3419
wim	37:ce348c002929	3420	// Place the 4bit data on the databus
wim	37:ce348c002929	3421	// Used for mbed pins, I2C bus expander or SPI shifregister
wim	37:ce348c002929	3422	void TextLCD_I2C::_setData(int value) {
wim	37:ce348c002929	3423
wim	37:ce348c002929	3424	// Place the 4bit data on the databus shadowvalue
wim	37:ce348c002929	3425	_setDataBits(value);
wim	37:ce348c002929	3426
wim	37:ce348c002929	3427	// Place the 4bit data on the databus
wim	37:ce348c002929	3428	#if (MCP23008==1)
wim	37:ce348c002929	3429	// MCP23008 portexpander
wim	37:ce348c002929	3430
wim	37:ce348c002929	3431	// write the new data to the portexpander
wim	37:ce348c002929	3432	_writeRegister(GPIO, _lcd_bus);
wim	26:bd897a001012	3433	#else
wim	26:bd897a001012	3434	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	3435
wim	21:9eb628d9e164	3436	// write the new data to the I2C portexpander
wim	21:9eb628d9e164	3437	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	30:033048611c01	3438	#endif
wim	21:9eb628d9e164	3439	}
wim	21:9eb628d9e164	3440
wim	37:ce348c002929	3441	// Write data to MCP23008 I2C portexpander
wim	37:ce348c002929	3442	// Used for mbed I2C bus expander
wim	37:ce348c002929	3443	void TextLCD_I2C::_writeRegister (int reg, int value) {
wim	37:ce348c002929	3444	char data[] = {reg, value};
wim	37:ce348c002929	3445
wim	37:ce348c002929	3446	_i2c->write(_slaveAddress, data, 2);
wim	37:ce348c002929	3447	}
wim	37:ce348c002929	3448
wim	37:ce348c002929	3449	//New optimized
wim	37:ce348c002929	3450	//Test faster _writeByte 0.11s vs 0.27s for a 20x4 fillscreen (PCF8574)
wim	37:ce348c002929	3451	//Test faster _writeByte 0.14s vs 0.34s for a 20x4 fillscreen (MCP23008)
wim	37:ce348c002929	3452
wim	37:ce348c002929	3453	// Write a byte using I2C
wim	37:ce348c002929	3454	void TextLCD_I2C::_writeByte(int value) {
wim	37:ce348c002929	3455	char data[6];
wim	37:ce348c002929	3456
wim	37:ce348c002929	3457	#if (MCP23008==1)
wim	37:ce348c002929	3458	// MCP23008 portexpander
wim	37:ce348c002929	3459
wim	37:ce348c002929	3460	data[0] = GPIO; // set registeraddres
wim	37:ce348c002929	3461	// Note: auto-increment is disabled so all data will go to GPIO register
wim	37:ce348c002929	3462
wim	37:ce348c002929	3463	_setEnableBit(true); // set E
wim	37:ce348c002929	3464	_setDataBits(value >> 4); // set data high
wim	37:ce348c002929	3465	data[1] = _lcd_bus;
wim	37:ce348c002929	3466
wim	37:ce348c002929	3467	_setEnableBit(false); // clear E
wim	37:ce348c002929	3468	data[2] = _lcd_bus;
wim	37:ce348c002929	3469
wim	37:ce348c002929	3470	_setEnableBit(true); // set E
wim	37:ce348c002929	3471	_setDataBits(value); // set data low
wim	37:ce348c002929	3472	data[3] = _lcd_bus;
wim	37:ce348c002929	3473
wim	37:ce348c002929	3474	_setEnableBit(false); // clear E
wim	37:ce348c002929	3475	data[4] = _lcd_bus;
wim	37:ce348c002929	3476
wim	37:ce348c002929	3477	// write the packed data to the I2C portexpander
wim	37:ce348c002929	3478	_i2c->write(_slaveAddress, data, 5);
wim	37:ce348c002929	3479	#else
wim	37:ce348c002929	3480	// PCF8574 of PCF8574A portexpander
wim	37:ce348c002929	3481
wim	37:ce348c002929	3482	_setEnableBit(true); // set E
wim	37:ce348c002929	3483	_setDataBits(value >> 4); // set data high
wim	37:ce348c002929	3484	data[0] = _lcd_bus;
wim	37:ce348c002929	3485
wim	37:ce348c002929	3486	_setEnableBit(false); // clear E
wim	37:ce348c002929	3487	data[1] = _lcd_bus;
wim	37:ce348c002929	3488
wim	37:ce348c002929	3489	_setEnableBit(true); // set E
wim	37:ce348c002929	3490	_setDataBits(value); // set data low
wim	37:ce348c002929	3491	data[2] = _lcd_bus;
wim	37:ce348c002929	3492
wim	37:ce348c002929	3493	_setEnableBit(false); // clear E
wim	37:ce348c002929	3494	data[3] = _lcd_bus;
wim	37:ce348c002929	3495
wim	37:ce348c002929	3496	// write the packed data to the I2C portexpander
wim	37:ce348c002929	3497	_i2c->write(_slaveAddress, data, 4);
wim	37:ce348c002929	3498	#endif
wim	37:ce348c002929	3499	}
wim	37:ce348c002929	3500
wim	37:ce348c002929	3501	#endif /* I2C Expander PCF8574/MCP23008 */
wim	37:ce348c002929	3502	//---------- End TextLCD_I2C ------------
wim	37:ce348c002929	3503
wim	37:ce348c002929	3504
wim	37:ce348c002929	3505	//--------- Start TextLCD_SPI -----------
wim	37:ce348c002929	3506	#if(LCD_SPI == 1) /* SPI Expander SN74595 */
wim	37:ce348c002929	3507
wim	37:ce348c002929	3508	/** Create a TextLCD interface using an SPI 74595 portexpander
wim	37:ce348c002929	3509	*
wim	37:ce348c002929	3510	* @param spi SPI Bus
wim	37:ce348c002929	3511	* @param cs chip select pin (active low)
wim	37:ce348c002929	3512	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	37:ce348c002929	3513	* @param ctrl LCD controller (default = HD44780)
wim	37:ce348c002929	3514	*/
wim	37:ce348c002929	3515	TextLCD_SPI::TextLCD_SPI(SPI *spi, PinName cs, LCDType type, LCDCtrl ctrl) :
wim	37:ce348c002929	3516	TextLCD_Base(type, ctrl),
wim	37:ce348c002929	3517	_spi(spi),
wim	38:cbe275b0b647	3518	_cs(cs) {
wim	37:ce348c002929	3519	// Init cs
wim	37:ce348c002929	3520	_cs = 1;
wim	37:ce348c002929	3521
wim	37:ce348c002929	3522	// Setup the spi for 8 bit data, low steady state clock,
wim	37:ce348c002929	3523	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	37:ce348c002929	3524	_spi->format(8,0);
wim	37:ce348c002929	3525	_spi->frequency(500000);
wim	37:ce348c002929	3526	//_spi.frequency(1000000);
wim	37:ce348c002929	3527
wim	38:cbe275b0b647	3528	wait_ms(100); // Wait 100ms to ensure LCD powered up
wim	38:cbe275b0b647	3529
wim	37:ce348c002929	3530	// Init the portexpander bus
wim	38:cbe275b0b647	3531	_lcd_bus = LCD_BUS_SPI_DEF;
wim	37:ce348c002929	3532
wim	37:ce348c002929	3533	// write the new data to the portexpander
wim	37:ce348c002929	3534	_cs = 0;
wim	37:ce348c002929	3535	_spi->write(_lcd_bus);
wim	37:ce348c002929	3536	_cs = 1;
wim	37:ce348c002929	3537
wim	37:ce348c002929	3538	_init(_LCD_DL_4); // Set Datalength to 4 bit for all serial expander interfaces
wim	37:ce348c002929	3539	}
wim	37:ce348c002929	3540
wim	37:ce348c002929	3541	// Set E pin (or E2 pin)
wim	37:ce348c002929	3542	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	37:ce348c002929	3543	void TextLCD_SPI::_setEnable(bool value) {
wim	37:ce348c002929	3544
wim	37:ce348c002929	3545	if(_ctrl_idx==_LCDCtrl_0) {
wim	37:ce348c002929	3546	if (value) {
wim	38:cbe275b0b647	3547	_lcd_bus \|= LCD_BUS_SPI_E; // Set E bit
wim	37:ce348c002929	3548	}
wim	37:ce348c002929	3549	else {
wim	38:cbe275b0b647	3550	_lcd_bus &= ~LCD_BUS_SPI_E; // Reset E bit
wim	37:ce348c002929	3551	}
wim	37:ce348c002929	3552	}
wim	37:ce348c002929	3553	else {
wim	37:ce348c002929	3554	if (value) {
wim	38:cbe275b0b647	3555	_lcd_bus \|= LCD_BUS_SPI_E2; // Set E2 bit
wim	37:ce348c002929	3556	}
wim	37:ce348c002929	3557	else {
wim	38:cbe275b0b647	3558	_lcd_bus &= ~LCD_BUS_SPI_E2; // Reset E2 bit
wim	37:ce348c002929	3559	}
wim	37:ce348c002929	3560	}
wim	37:ce348c002929	3561
wim	37:ce348c002929	3562	// write the new data to the SPI portexpander
wim	37:ce348c002929	3563	_cs = 0;
wim	37:ce348c002929	3564	_spi->write(_lcd_bus);
wim	37:ce348c002929	3565	_cs = 1;
wim	37:ce348c002929	3566	}
wim	37:ce348c002929	3567
wim	37:ce348c002929	3568	// Set RS pin
wim	37:ce348c002929	3569	// Used for mbed pins, I2C bus expander or SPI shiftregister and SPI_N
wim	37:ce348c002929	3570	void TextLCD_SPI::_setRS(bool value) {
wim	37:ce348c002929	3571
wim	37:ce348c002929	3572	if (value) {
wim	38:cbe275b0b647	3573	_lcd_bus \|= LCD_BUS_SPI_RS; // Set RS bit
wim	37:ce348c002929	3574	}
wim	37:ce348c002929	3575	else {
wim	38:cbe275b0b647	3576	_lcd_bus &= ~LCD_BUS_SPI_RS; // Reset RS bit
wim	37:ce348c002929	3577	}
wim	37:ce348c002929	3578
wim	37:ce348c002929	3579	// write the new data to the SPI portexpander
wim	37:ce348c002929	3580	_cs = 0;
wim	37:ce348c002929	3581	_spi->write(_lcd_bus);
wim	37:ce348c002929	3582	_cs = 1;
wim	37:ce348c002929	3583	}
wim	37:ce348c002929	3584
wim	37:ce348c002929	3585	// Set BL pin
wim	37:ce348c002929	3586	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	37:ce348c002929	3587	void TextLCD_SPI::_setBL(bool value) {
wim	37:ce348c002929	3588
wim	37:ce348c002929	3589	if (value) {
wim	38:cbe275b0b647	3590	_lcd_bus \|= LCD_BUS_SPI_BL; // Set BL bit
wim	37:ce348c002929	3591	}
wim	37:ce348c002929	3592	else {
wim	38:cbe275b0b647	3593	_lcd_bus &= ~LCD_BUS_SPI_BL; // Reset BL bit
wim	37:ce348c002929	3594	}
wim	37:ce348c002929	3595
wim	37:ce348c002929	3596	// write the new data to the SPI portexpander
wim	37:ce348c002929	3597	_cs = 0;
wim	37:ce348c002929	3598	_spi->write(_lcd_bus);
wim	37:ce348c002929	3599	_cs = 1;
wim	37:ce348c002929	3600	}
wim	21:9eb628d9e164	3601
wim	21:9eb628d9e164	3602	// Place the 4bit data on the databus
wim	37:ce348c002929	3603	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	37:ce348c002929	3604	void TextLCD_SPI::_setData(int value) {
wim	22:35742ec80c24	3605
wim	22:35742ec80c24	3606	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	37:ce348c002929	3607	if (value & 0x01) {
wim	38:cbe275b0b647	3608	_lcd_bus \|= LCD_BUS_SPI_D4; // Set Databit
wim	26:bd897a001012	3609	}
wim	37:ce348c002929	3610	else {
wim	38:cbe275b0b647	3611	_lcd_bus &= ~LCD_BUS_SPI_D4; // Reset Databit
wim	37:ce348c002929	3612	}
wim	37:ce348c002929	3613
wim	37:ce348c002929	3614	if (value & 0x02) {
wim	38:cbe275b0b647	3615	_lcd_bus \|= LCD_BUS_SPI_D5; // Set Databit
wim	26:bd897a001012	3616	}
wim	26:bd897a001012	3617	else {
wim	38:cbe275b0b647	3618	_lcd_bus &= ~LCD_BUS_SPI_D5; // Reset Databit
wim	37:ce348c002929	3619	}
wim	37:ce348c002929	3620
wim	37:ce348c002929	3621	if (value & 0x04) {
wim	38:cbe275b0b647	3622	_lcd_bus \|= LCD_BUS_SPI_D6; // Set Databit
wim	26:bd897a001012	3623	}
wim	37:ce348c002929	3624	else {
wim	38:cbe275b0b647	3625	_lcd_bus &= ~LCD_BUS_SPI_D6; // Reset Databit
wim	37:ce348c002929	3626	}
wim	37:ce348c002929	3627
wim	37:ce348c002929	3628	if (value & 0x08) {
wim	38:cbe275b0b647	3629	_lcd_bus \|= LCD_BUS_SPI_D7; // Set Databit
wim	26:bd897a001012	3630	}
wim	26:bd897a001012	3631	else {
wim	38:cbe275b0b647	3632	_lcd_bus &= ~LCD_BUS_SPI_D7; // Reset Databit
wim	26:bd897a001012	3633	}
wim	21:9eb628d9e164	3634
wim	37:ce348c002929	3635	// write the new data to the SPI portexpander
wim	37:ce348c002929	3636	_cs = 0;
wim	37:ce348c002929	3637	_spi->write(_lcd_bus);
wim	37:ce348c002929	3638	_cs = 1;
wim	22:35742ec80c24	3639	}
wim	21:9eb628d9e164	3640
wim	37:ce348c002929	3641	#endif /* SPI Expander SN74595 */
wim	37:ce348c002929	3642	//---------- End TextLCD_SPI ------------
wim	21:9eb628d9e164	3643
wim	21:9eb628d9e164	3644
wim	28:30fa94f7341c	3645	//--------- Start TextLCD_I2C_N ---------
wim	34:e5a0dcb43ecc	3646	#if(LCD_I2C_N == 1) /* Native I2C */
wim	28:30fa94f7341c	3647
wim	28:30fa94f7341c	3648	/** Create a TextLCD interface using a controller with native I2C interface
wim	28:30fa94f7341c	3649	*
wim	28:30fa94f7341c	3650	* @param i2c I2C Bus
wim	28:30fa94f7341c	3651	* @param deviceAddress I2C slave address (default = 0x7C)
wim	28:30fa94f7341c	3652	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	28:30fa94f7341c	3653	* @param bl Backlight control line (optional, default = NC)
wim	28:30fa94f7341c	3654	* @param ctrl LCD controller (default = ST7032_3V3)
wim	28:30fa94f7341c	3655	*/
wim	28:30fa94f7341c	3656	TextLCD_I2C_N::TextLCD_I2C_N(I2C *i2c, char deviceAddress, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	28:30fa94f7341c	3657	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	3658
wim	33:900a94bc7585	3659	_i2c(i2c){
wim	30:033048611c01	3660
wim	28:30fa94f7341c	3661	_slaveAddress = deviceAddress & 0xFE;
wim	28:30fa94f7341c	3662
wim	28:30fa94f7341c	3663	// Setup the I2C bus
wim	29:a3663151aa65	3664	// The max bitrate for ST7032i is 400kbit, lets stick to default here
wim	29:a3663151aa65	3665	_i2c->frequency(100000);
wim	32:59c4b8f648d4	3666
wim	30:033048611c01	3667
wim	28:30fa94f7341c	3668	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	28:30fa94f7341c	3669	if (bl != NC) {
wim	28:30fa94f7341c	3670	_bl = new DigitalOut(bl); //Construct new pin
wim	28:30fa94f7341c	3671	_bl->write(0); //Deactivate
wim	28:30fa94f7341c	3672	}
wim	28:30fa94f7341c	3673	else {
wim	28:30fa94f7341c	3674	// No Hardware Backlight pin
wim	28:30fa94f7341c	3675	_bl = NULL; //Construct dummy pin
wim	28:30fa94f7341c	3676	}
wim	28:30fa94f7341c	3677
wim	30:033048611c01	3678	//Sanity check
wim	30:033048611c01	3679	if (_ctrl & LCD_C_I2C) {
wim	36:9f5f86dfd44a	3680	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	30:033048611c01	3681	}
wim	30:033048611c01	3682	else {
wim	30:033048611c01	3683	error("Error: LCD Controller type does not support native I2C interface\n\r");
wim	30:033048611c01	3684	}
wim	28:30fa94f7341c	3685	}
wim	28:30fa94f7341c	3686
wim	28:30fa94f7341c	3687	TextLCD_I2C_N::~TextLCD_I2C_N() {
wim	28:30fa94f7341c	3688	if (_bl != NULL) {delete _bl;} // BL pin
wim	28:30fa94f7341c	3689	}
wim	28:30fa94f7341c	3690
wim	28:30fa94f7341c	3691	// Not used in this mode
wim	28:30fa94f7341c	3692	void TextLCD_I2C_N::_setEnable(bool value) {
wim	28:30fa94f7341c	3693	}
wim	28:30fa94f7341c	3694
wim	28:30fa94f7341c	3695	// Set RS pin
wim	28:30fa94f7341c	3696	// Used for mbed pins, I2C bus expander or SPI shiftregister and native I2C or SPI
wim	28:30fa94f7341c	3697	void TextLCD_I2C_N::_setRS(bool value) {
wim	30:033048611c01	3698	// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	3699	// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
wim	30:033048611c01	3700	// Co RS RW 0 0 0 0 0 command or data
wim	30:033048611c01	3701	//
wim	30:033048611c01	3702	// C0=1 indicates that another controlbyte will follow after the next data or command byte
wim	30:033048611c01	3703	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	3704	// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
wim	30:033048611c01	3705	// Many native I2C controllers dont support this option and it is not used by this lib.
wim	30:033048611c01	3706	//
wim	30:033048611c01	3707
wim	28:30fa94f7341c	3708	if (value) {
wim	28:30fa94f7341c	3709	_controlbyte = 0x40; // Next byte is data, No more control bytes will follow
wim	28:30fa94f7341c	3710	}
wim	28:30fa94f7341c	3711	else {
wim	28:30fa94f7341c	3712	_controlbyte = 0x00; // Next byte is command, No more control bytes will follow
wim	28:30fa94f7341c	3713	}
wim	28:30fa94f7341c	3714	}
wim	28:30fa94f7341c	3715
wim	28:30fa94f7341c	3716	// Set BL pin
wim	28:30fa94f7341c	3717	void TextLCD_I2C_N::_setBL(bool value) {
wim	28:30fa94f7341c	3718	if (_bl) {
wim	28:30fa94f7341c	3719	_bl->write(value);
wim	28:30fa94f7341c	3720	}
wim	28:30fa94f7341c	3721	}
wim	29:a3663151aa65	3722
wim	29:a3663151aa65	3723	// Not used in this mode
wim	29:a3663151aa65	3724	void TextLCD_I2C_N::_setData(int value) {
wim	29:a3663151aa65	3725	}
wim	29:a3663151aa65	3726
wim	28:30fa94f7341c	3727	// Write a byte using I2C
wim	28:30fa94f7341c	3728	void TextLCD_I2C_N::_writeByte(int value) {
wim	30:033048611c01	3729	// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	3730	// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
wim	30:033048611c01	3731	// Co RS RW 0 0 0 0 0 command or data
wim	30:033048611c01	3732	//
wim	30:033048611c01	3733	// C0=1 indicates that another controlbyte will follow after the next data or command byte
wim	30:033048611c01	3734	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	3735	// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
wim	30:033048611c01	3736	// Many native I2C controllers dont support this option and it is not used by this lib.
wim	30:033048611c01	3737	//
wim	28:30fa94f7341c	3738	char data[] = {_controlbyte, value};
wim	28:30fa94f7341c	3739
wim	32:59c4b8f648d4	3740	#if(LCD_I2C_ACK==1)
wim	32:59c4b8f648d4	3741	//Controllers that support ACK
wim	30:033048611c01	3742	_i2c->write(_slaveAddress, data, 2);
wim	32:59c4b8f648d4	3743	#else
wim	32:59c4b8f648d4	3744	//Controllers that dont support ACK
wim	37:ce348c002929	3745	//Note: This may be issue with some mbed platforms that dont fully/correctly support I2C byte operations.
wim	32:59c4b8f648d4	3746	_i2c->start();
wim	32:59c4b8f648d4	3747	_i2c->write(_slaveAddress);
wim	32:59c4b8f648d4	3748	_i2c->write(data[0]);
wim	32:59c4b8f648d4	3749	_i2c->write(data[1]);
wim	32:59c4b8f648d4	3750	_i2c->stop();
wim	32:59c4b8f648d4	3751	#endif
wim	28:30fa94f7341c	3752	}
wim	34:e5a0dcb43ecc	3753	#endif /* Native I2C */
wim	28:30fa94f7341c	3754	//-------- End TextLCD_I2C_N ------------
wim	28:30fa94f7341c	3755
wim	28:30fa94f7341c	3756
wim	25:6162b31128c9	3757	//--------- Start TextLCD_SPI_N ---------
wim	34:e5a0dcb43ecc	3758	#if(LCD_SPI_N == 1) /* Native SPI bus */
wim	30:033048611c01	3759	/** Create a TextLCD interface using a controller with a native SPI4 interface
Sissors	24:fb3399713710	3760	*
Sissors	24:fb3399713710	3761	* @param spi SPI Bus
Sissors	24:fb3399713710	3762	* @param cs chip select pin (active low)
wim	25:6162b31128c9	3763	* @param rs Instruction/data control line
Sissors	24:fb3399713710	3764	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	25:6162b31128c9	3765	* @param bl Backlight control line (optional, default = NC)
wim	26:bd897a001012	3766	* @param ctrl LCD controller (default = ST7032_3V3)
wim	25:6162b31128c9	3767	*/
wim	25:6162b31128c9	3768	TextLCD_SPI_N::TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	25:6162b31128c9	3769	TextLCD_Base(type, ctrl),
wim	25:6162b31128c9	3770	_spi(spi),
wim	25:6162b31128c9	3771	_cs(cs),
wim	25:6162b31128c9	3772	_rs(rs) {
Sissors	24:fb3399713710	3773
wim	32:59c4b8f648d4	3774	// Init CS
wim	32:59c4b8f648d4	3775	_cs = 1;
wim	32:59c4b8f648d4	3776
wim	36:9f5f86dfd44a	3777	// Setup the spi for 8 bit data, high steady state clock,
wim	36:9f5f86dfd44a	3778	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	36:9f5f86dfd44a	3779	// _spi->format(8,3);
wim	37:ce348c002929	3780	// _spi->frequency(500000);
wim	36:9f5f86dfd44a	3781	// _spi->frequency(1000000);
wim	36:9f5f86dfd44a	3782
Sissors	24:fb3399713710	3783	// Setup the spi for 8 bit data, low steady state clock,
Sissors	24:fb3399713710	3784	// rising edge capture, with a 500KHz or 1MHz clock rate
Sissors	24:fb3399713710	3785	_spi->format(8,0);
wim	36:9f5f86dfd44a	3786	// _spi->frequency(500000);
Sissors	24:fb3399713710	3787	_spi->frequency(1000000);
wim	36:9f5f86dfd44a	3788
Sissors	24:fb3399713710	3789	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
Sissors	24:fb3399713710	3790	if (bl != NC) {
Sissors	24:fb3399713710	3791	_bl = new DigitalOut(bl); //Construct new pin
Sissors	24:fb3399713710	3792	_bl->write(0); //Deactivate
Sissors	24:fb3399713710	3793	}
Sissors	24:fb3399713710	3794	else {
Sissors	24:fb3399713710	3795	// No Hardware Backlight pin
Sissors	24:fb3399713710	3796	_bl = NULL; //Construct dummy pin
Sissors	24:fb3399713710	3797	}
wim	30:033048611c01	3798
wim	30:033048611c01	3799	//Sanity check
wim	30:033048611c01	3800	if (_ctrl & LCD_C_SPI4) {
wim	36:9f5f86dfd44a	3801	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	36:9f5f86dfd44a	3802	// ST7070 must set datalength to 8 bits!
wim	30:033048611c01	3803	}
wim	30:033048611c01	3804	else {
wim	30:033048611c01	3805	error("Error: LCD Controller type does not support native SPI4 interface\n\r");
wim	30:033048611c01	3806	}
Sissors	24:fb3399713710	3807	}
Sissors	24:fb3399713710	3808
wim	25:6162b31128c9	3809	TextLCD_SPI_N::~TextLCD_SPI_N() {
Sissors	24:fb3399713710	3810	if (_bl != NULL) {delete _bl;} // BL pin
Sissors	24:fb3399713710	3811	}
Sissors	24:fb3399713710	3812
Sissors	24:fb3399713710	3813	// Not used in this mode
wim	25:6162b31128c9	3814	void TextLCD_SPI_N::_setEnable(bool value) {
Sissors	24:fb3399713710	3815	}
Sissors	24:fb3399713710	3816
Sissors	24:fb3399713710	3817	// Set RS pin
wim	36:9f5f86dfd44a	3818	// Used for mbed pins, I2C bus expander or SPI shiftregister, SPI_N
wim	25:6162b31128c9	3819	void TextLCD_SPI_N::_setRS(bool value) {
Sissors	24:fb3399713710	3820	_rs = value;
Sissors	24:fb3399713710	3821	}
Sissors	24:fb3399713710	3822
Sissors	24:fb3399713710	3823	// Set BL pin
wim	25:6162b31128c9	3824	void TextLCD_SPI_N::_setBL(bool value) {
wim	26:bd897a001012	3825	if (_bl) {
Sissors	24:fb3399713710	3826	_bl->write(value);
wim	26:bd897a001012	3827	}
Sissors	24:fb3399713710	3828	}
Sissors	24:fb3399713710	3829
wim	29:a3663151aa65	3830	// Not used in this mode
wim	29:a3663151aa65	3831	void TextLCD_SPI_N::_setData(int value) {
wim	29:a3663151aa65	3832	}
wim	29:a3663151aa65	3833
Sissors	24:fb3399713710	3834	// Write a byte using SPI
wim	25:6162b31128c9	3835	void TextLCD_SPI_N::_writeByte(int value) {
Sissors	24:fb3399713710	3836	_cs = 0;
Sissors	24:fb3399713710	3837	wait_us(1);
Sissors	24:fb3399713710	3838	_spi->write(value);
Sissors	24:fb3399713710	3839	wait_us(1);
Sissors	24:fb3399713710	3840	_cs = 1;
Sissors	24:fb3399713710	3841	}
wim	34:e5a0dcb43ecc	3842	#endif /* Native SPI bus */
wim	25:6162b31128c9	3843	//-------- End TextLCD_SPI_N ------------
wim	21:9eb628d9e164	3844
wim	21:9eb628d9e164	3845
wim	36:9f5f86dfd44a	3846	//-------- Start TextLCD_SPI_N_3_8 --------
wim	36:9f5f86dfd44a	3847	#if(LCD_SPI_N_3_8 == 1) /* Native SPI bus */
wim	36:9f5f86dfd44a	3848
wim	36:9f5f86dfd44a	3849	/** Create a TextLCD interface using a controller with a native SPI3 8 bits interface
wim	36:9f5f86dfd44a	3850	* This mode is supported by ST7070. Note that implementation in TexTLCD is not very efficient due to
wim	36:9f5f86dfd44a	3851	* structure of the TextLCD library: each databyte is written separately and requires a separate 'count command' set to 1 byte.
wim	36:9f5f86dfd44a	3852	*
wim	36:9f5f86dfd44a	3853	* @param spi SPI Bus
wim	36:9f5f86dfd44a	3854	* @param cs chip select pin (active low)
wim	36:9f5f86dfd44a	3855	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	36:9f5f86dfd44a	3856	* @param bl Backlight control line (optional, default = NC)
wim	36:9f5f86dfd44a	3857	* @param ctrl LCD controller (default = ST7070)
wim	36:9f5f86dfd44a	3858	*/
wim	36:9f5f86dfd44a	3859	TextLCD_SPI_N_3_8::TextLCD_SPI_N_3_8(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	36:9f5f86dfd44a	3860	TextLCD_Base(type, ctrl),
wim	36:9f5f86dfd44a	3861	_spi(spi),
wim	36:9f5f86dfd44a	3862	_cs(cs) {
wim	36:9f5f86dfd44a	3863
wim	36:9f5f86dfd44a	3864	// Init CS
wim	36:9f5f86dfd44a	3865	_cs = 1;
wim	36:9f5f86dfd44a	3866
wim	36:9f5f86dfd44a	3867	// Setup the spi for 8 bit data, high steady state clock,
wim	36:9f5f86dfd44a	3868	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	36:9f5f86dfd44a	3869	// _spi->format(8,3);
wim	37:ce348c002929	3870	// _spi->frequency(500000);
wim	36:9f5f86dfd44a	3871	// _spi->frequency(1000000);
wim	36:9f5f86dfd44a	3872
wim	36:9f5f86dfd44a	3873	// Setup the spi for 8 bit data, low steady state clock,
wim	36:9f5f86dfd44a	3874	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	36:9f5f86dfd44a	3875	_spi->format(8,0);
wim	36:9f5f86dfd44a	3876	// _spi->frequency(500000);
wim	36:9f5f86dfd44a	3877	_spi->frequency(1000000);
wim	36:9f5f86dfd44a	3878
wim	36:9f5f86dfd44a	3879
wim	36:9f5f86dfd44a	3880	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	36:9f5f86dfd44a	3881	if (bl != NC) {
wim	36:9f5f86dfd44a	3882	_bl = new DigitalOut(bl); //Construct new pin
wim	36:9f5f86dfd44a	3883	_bl->write(0); //Deactivate
wim	36:9f5f86dfd44a	3884	}
wim	36:9f5f86dfd44a	3885	else {
wim	36:9f5f86dfd44a	3886	// No Hardware Backlight pin
wim	36:9f5f86dfd44a	3887	_bl = NULL; //Construct dummy pin
wim	36:9f5f86dfd44a	3888	}
wim	36:9f5f86dfd44a	3889
wim	36:9f5f86dfd44a	3890	//Sanity check
wim	36:9f5f86dfd44a	3891	if (_ctrl & LCD_C_SPI3_8) {
wim	36:9f5f86dfd44a	3892	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	36:9f5f86dfd44a	3893	}
wim	36:9f5f86dfd44a	3894	else {
wim	36:9f5f86dfd44a	3895	error("Error: LCD Controller type does not support native SPI3 8 bits interface\n\r");
wim	36:9f5f86dfd44a	3896	}
wim	36:9f5f86dfd44a	3897	}
wim	36:9f5f86dfd44a	3898
wim	36:9f5f86dfd44a	3899	TextLCD_SPI_N_3_8::~TextLCD_SPI_N_3_8() {
wim	36:9f5f86dfd44a	3900	if (_bl != NULL) {delete _bl;} // BL pin
wim	36:9f5f86dfd44a	3901	}
wim	36:9f5f86dfd44a	3902
wim	36:9f5f86dfd44a	3903	// Not used in this mode
wim	36:9f5f86dfd44a	3904	void TextLCD_SPI_N_3_8::_setEnable(bool value) {
wim	36:9f5f86dfd44a	3905	}
wim	36:9f5f86dfd44a	3906
wim	36:9f5f86dfd44a	3907	// Used for mbed pins, I2C bus expander or SPI shiftregister, SPI_N
wim	36:9f5f86dfd44a	3908	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	36:9f5f86dfd44a	3909	void TextLCD_SPI_N_3_8::_setRS(bool value) {
wim	36:9f5f86dfd44a	3910
wim	36:9f5f86dfd44a	3911	if (value) {
wim	36:9f5f86dfd44a	3912	_controlbyte = 0x01; // Next byte is data, No more control bytes will follow
wim	36:9f5f86dfd44a	3913	}
wim	36:9f5f86dfd44a	3914	else {
wim	36:9f5f86dfd44a	3915	_controlbyte = 0x00; // Next byte is command, No more control bytes will follow
wim	36:9f5f86dfd44a	3916	}
wim	36:9f5f86dfd44a	3917	}
wim	36:9f5f86dfd44a	3918
wim	36:9f5f86dfd44a	3919	// Set BL pin
wim	36:9f5f86dfd44a	3920	void TextLCD_SPI_N_3_8::_setBL(bool value) {
wim	36:9f5f86dfd44a	3921	if (_bl) {
wim	36:9f5f86dfd44a	3922	_bl->write(value);
wim	36:9f5f86dfd44a	3923	}
wim	36:9f5f86dfd44a	3924	}
wim	36:9f5f86dfd44a	3925
wim	36:9f5f86dfd44a	3926	// Not used in this mode
wim	36:9f5f86dfd44a	3927	void TextLCD_SPI_N_3_8::_setData(int value) {
wim	36:9f5f86dfd44a	3928	}
wim	36:9f5f86dfd44a	3929
wim	36:9f5f86dfd44a	3930	// Write a byte using SPI3 8 bits mode (ST7070)
wim	36:9f5f86dfd44a	3931	void TextLCD_SPI_N_3_8::_writeByte(int value) {
wim	36:9f5f86dfd44a	3932
wim	36:9f5f86dfd44a	3933	if (_controlbyte == 0x00) { // Byte is command
wim	36:9f5f86dfd44a	3934	_cs = 0;
wim	36:9f5f86dfd44a	3935	wait_us(1);
wim	36:9f5f86dfd44a	3936	_spi->write(value);
wim	36:9f5f86dfd44a	3937	wait_us(1);
wim	36:9f5f86dfd44a	3938	_cs = 1;
wim	36:9f5f86dfd44a	3939	}
wim	36:9f5f86dfd44a	3940	else { // Byte is data
wim	36:9f5f86dfd44a	3941	// Select Extended Instr Set
wim	36:9f5f86dfd44a	3942	_cs = 0;
wim	36:9f5f86dfd44a	3943	wait_us(1);
wim	36:9f5f86dfd44a	3944	_spi->write(0x20 \| _function \| 0x04); // Set function, 0 0 1 DL N EXT=1 x x (Select Instr Set = 1));
wim	36:9f5f86dfd44a	3945	wait_us(1);
wim	36:9f5f86dfd44a	3946	_cs = 1;
wim	36:9f5f86dfd44a	3947
wim	36:9f5f86dfd44a	3948	wait_us(40); // Wait until command has finished...
wim	36:9f5f86dfd44a	3949
wim	36:9f5f86dfd44a	3950	// Set Count to 1 databyte
wim	36:9f5f86dfd44a	3951	_cs = 0;
wim	36:9f5f86dfd44a	3952	wait_us(1);
wim	36:9f5f86dfd44a	3953	_spi->write(0x80); // Set display data length, 1 L6 L5 L4 L3 L2 L1 L0 (Instr Set = 1)
wim	36:9f5f86dfd44a	3954	wait_us(1);
wim	36:9f5f86dfd44a	3955	_cs = 1;
wim	36:9f5f86dfd44a	3956
wim	36:9f5f86dfd44a	3957	wait_us(40);
wim	36:9f5f86dfd44a	3958
wim	36:9f5f86dfd44a	3959	// Write 1 databyte
wim	36:9f5f86dfd44a	3960	_cs = 0;
wim	36:9f5f86dfd44a	3961	wait_us(1);
wim	36:9f5f86dfd44a	3962	_spi->write(value); // Write data (Instr Set = 1)
wim	36:9f5f86dfd44a	3963	wait_us(1);
wim	36:9f5f86dfd44a	3964	_cs = 1;
wim	36:9f5f86dfd44a	3965
wim	36:9f5f86dfd44a	3966	wait_us(40);
wim	36:9f5f86dfd44a	3967
wim	36:9f5f86dfd44a	3968	// Select Standard Instr Set
wim	36:9f5f86dfd44a	3969	_cs = 0;
wim	36:9f5f86dfd44a	3970	wait_us(1);
wim	36:9f5f86dfd44a	3971	_spi->write(0x20 \| _function); // Set function, 0 0 1 DL N EXT=0 x x (Select Instr Set = 0));
wim	36:9f5f86dfd44a	3972	wait_us(1);
wim	36:9f5f86dfd44a	3973	_cs = 1;
wim	36:9f5f86dfd44a	3974	}
wim	36:9f5f86dfd44a	3975	}
wim	36:9f5f86dfd44a	3976	#endif /* Native SPI bus */
wim	36:9f5f86dfd44a	3977	//------- End TextLCD_SPI_N_3_8 -----------
wim	36:9f5f86dfd44a	3978
wim	36:9f5f86dfd44a	3979
wim	30:033048611c01	3980	//-------- Start TextLCD_SPI_N_3_9 --------
wim	34:e5a0dcb43ecc	3981	#if(LCD_SPI_N_3_9 == 1) /* Native SPI bus */
wim	34:e5a0dcb43ecc	3982	//Code checked out on logic analyser. Not yet tested on hardware..
wim	30:033048611c01	3983
wim	30:033048611c01	3984	/** Create a TextLCD interface using a controller with a native SPI3 9 bits interface
wim	30:033048611c01	3985	*
wim	30:033048611c01	3986	* @param spi SPI Bus
wim	30:033048611c01	3987	* @param cs chip select pin (active low)
wim	30:033048611c01	3988	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	3989	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	3990	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	3991	*/
wim	30:033048611c01	3992	TextLCD_SPI_N_3_9::TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	30:033048611c01	3993	TextLCD_Base(type, ctrl),
wim	30:033048611c01	3994	_spi(spi),
wim	33:900a94bc7585	3995	_cs(cs) {
wim	32:59c4b8f648d4	3996
wim	32:59c4b8f648d4	3997	// Init CS
wim	32:59c4b8f648d4	3998	_cs = 1;
wim	32:59c4b8f648d4	3999
wim	34:e5a0dcb43ecc	4000	// Setup the spi for 9 bit data, high steady state clock,
wim	30:033048611c01	4001	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	4002	_spi->format(9,3);
wim	30:033048611c01	4003	_spi->frequency(1000000);
wim	30:033048611c01	4004
wim	30:033048611c01	4005	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	30:033048611c01	4006	if (bl != NC) {
wim	30:033048611c01	4007	_bl = new DigitalOut(bl); //Construct new pin
wim	30:033048611c01	4008	_bl->write(0); //Deactivate
wim	30:033048611c01	4009	}
wim	30:033048611c01	4010	else {
wim	30:033048611c01	4011	// No Hardware Backlight pin
wim	30:033048611c01	4012	_bl = NULL; //Construct dummy pin
wim	30:033048611c01	4013	}
wim	30:033048611c01	4014
wim	30:033048611c01	4015	//Sanity check
wim	36:9f5f86dfd44a	4016	if (_ctrl & LCD_C_SPI3_9) {
wim	36:9f5f86dfd44a	4017	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	30:033048611c01	4018	}
wim	30:033048611c01	4019	else {
wim	30:033048611c01	4020	error("Error: LCD Controller type does not support native SPI3 9 bits interface\n\r");
wim	30:033048611c01	4021	}
wim	30:033048611c01	4022	}
wim	30:033048611c01	4023
wim	30:033048611c01	4024	TextLCD_SPI_N_3_9::~TextLCD_SPI_N_3_9() {
wim	30:033048611c01	4025	if (_bl != NULL) {delete _bl;} // BL pin
wim	30:033048611c01	4026	}
wim	30:033048611c01	4027
wim	30:033048611c01	4028	// Not used in this mode
wim	30:033048611c01	4029	void TextLCD_SPI_N_3_9::_setEnable(bool value) {
wim	30:033048611c01	4030	}
wim	30:033048611c01	4031
wim	30:033048611c01	4032	// Set RS pin
wim	30:033048611c01	4033	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	30:033048611c01	4034	void TextLCD_SPI_N_3_9::_setRS(bool value) {
wim	30:033048611c01	4035	// The controlbits define the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	4036	// b8 b7...........b0
wim	30:033048611c01	4037	// RS command or data
wim	30:033048611c01	4038	//
wim	30:033048611c01	4039	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	4040	//
wim	30:033048611c01	4041
wim	30:033048611c01	4042	if (value) {
wim	30:033048611c01	4043	_controlbyte = 0x01; // Next byte is data
wim	30:033048611c01	4044	}
wim	30:033048611c01	4045	else {
wim	30:033048611c01	4046	_controlbyte = 0x00; // Next byte is command
wim	34:e5a0dcb43ecc	4047	}
wim	30:033048611c01	4048	}
wim	30:033048611c01	4049
wim	30:033048611c01	4050	// Set BL pin
wim	30:033048611c01	4051	void TextLCD_SPI_N_3_9::_setBL(bool value) {
wim	30:033048611c01	4052	if (_bl) {
wim	30:033048611c01	4053	_bl->write(value);
wim	30:033048611c01	4054	}
wim	30:033048611c01	4055	}
wim	30:033048611c01	4056
wim	30:033048611c01	4057	// Not used in this mode
wim	30:033048611c01	4058	void TextLCD_SPI_N_3_9::_setData(int value) {
wim	30:033048611c01	4059	}
wim	30:033048611c01	4060
wim	30:033048611c01	4061	// Write a byte using SPI3 9 bits mode
wim	30:033048611c01	4062	void TextLCD_SPI_N_3_9::_writeByte(int value) {
wim	30:033048611c01	4063	_cs = 0;
wim	30:033048611c01	4064	wait_us(1);
wim	30:033048611c01	4065	_spi->write( (_controlbyte << 8) \| (value & 0xFF));
wim	30:033048611c01	4066	wait_us(1);
wim	30:033048611c01	4067	_cs = 1;
wim	30:033048611c01	4068	}
wim	34:e5a0dcb43ecc	4069	#endif /* Native SPI bus */
wim	30:033048611c01	4070	//------- End TextLCD_SPI_N_3_9 -----------
wim	34:e5a0dcb43ecc	4071
wim	34:e5a0dcb43ecc	4072
wim	30:033048611c01	4073	//------- Start TextLCD_SPI_N_3_10 --------
wim	34:e5a0dcb43ecc	4074	#if(LCD_SPI_N_3_10 == 1) /* Native SPI bus */
wim	30:033048611c01	4075
wim	30:033048611c01	4076	/** Create a TextLCD interface using a controller with a native SPI3 10 bits interface
wim	30:033048611c01	4077	*
wim	30:033048611c01	4078	* @param spi SPI Bus
wim	30:033048611c01	4079	* @param cs chip select pin (active low)
wim	30:033048611c01	4080	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	4081	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	4082	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	4083	*/
wim	30:033048611c01	4084	TextLCD_SPI_N_3_10::TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	30:033048611c01	4085	TextLCD_Base(type, ctrl),
wim	30:033048611c01	4086	_spi(spi),
wim	30:033048611c01	4087	_cs(cs) {
wim	30:033048611c01	4088
wim	32:59c4b8f648d4	4089	// Init CS
wim	32:59c4b8f648d4	4090	_cs = 1;
wim	32:59c4b8f648d4	4091
wim	30:033048611c01	4092	// Setup the spi for 10 bit data, low steady state clock,
wim	30:033048611c01	4093	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	30:033048611c01	4094	_spi->format(10,0);
wim	30:033048611c01	4095	_spi->frequency(1000000);
wim	30:033048611c01	4096
wim	30:033048611c01	4097	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	30:033048611c01	4098	if (bl != NC) {
wim	30:033048611c01	4099	_bl = new DigitalOut(bl); //Construct new pin
wim	30:033048611c01	4100	_bl->write(0); //Deactivate
wim	30:033048611c01	4101	}
wim	30:033048611c01	4102	else {
wim	30:033048611c01	4103	// No Hardware Backlight pin
wim	30:033048611c01	4104	_bl = NULL; //Construct dummy pin
wim	30:033048611c01	4105	}
wim	30:033048611c01	4106
wim	30:033048611c01	4107	//Sanity check
wim	30:033048611c01	4108	if (_ctrl & LCD_C_SPI3_10) {
wim	36:9f5f86dfd44a	4109	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	30:033048611c01	4110	}
wim	30:033048611c01	4111	else {
wim	30:033048611c01	4112	error("Error: LCD Controller type does not support native SPI3 10 bits interface\n\r");
wim	30:033048611c01	4113	}
wim	30:033048611c01	4114	}
wim	30:033048611c01	4115
wim	30:033048611c01	4116	TextLCD_SPI_N_3_10::~TextLCD_SPI_N_3_10() {
wim	30:033048611c01	4117	if (_bl != NULL) {delete _bl;} // BL pin
wim	30:033048611c01	4118	}
wim	30:033048611c01	4119
wim	30:033048611c01	4120	// Not used in this mode
wim	30:033048611c01	4121	void TextLCD_SPI_N_3_10::_setEnable(bool value) {
wim	30:033048611c01	4122	}
wim	30:033048611c01	4123
wim	30:033048611c01	4124	// Set RS pin
wim	30:033048611c01	4125	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	30:033048611c01	4126	void TextLCD_SPI_N_3_10::_setRS(bool value) {
wim	30:033048611c01	4127	// The controlbits define the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	4128	// b9 b8 b7...........b0
wim	30:033048611c01	4129	// RS RW command or data
wim	30:033048611c01	4130	//
wim	30:033048611c01	4131	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	4132	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	30:033048611c01	4133	//
wim	30:033048611c01	4134
wim	30:033048611c01	4135	if (value) {
wim	30:033048611c01	4136	_controlbyte = 0x02; // Next byte is data
wim	30:033048611c01	4137	}
wim	30:033048611c01	4138	else {
wim	30:033048611c01	4139	_controlbyte = 0x00; // Next byte is command
wim	34:e5a0dcb43ecc	4140	}
wim	30:033048611c01	4141	}
wim	30:033048611c01	4142
wim	30:033048611c01	4143	// Set BL pin
wim	30:033048611c01	4144	void TextLCD_SPI_N_3_10::_setBL(bool value) {
wim	30:033048611c01	4145	if (_bl) {
wim	30:033048611c01	4146	_bl->write(value);
wim	30:033048611c01	4147	}
wim	30:033048611c01	4148	}
wim	30:033048611c01	4149
wim	30:033048611c01	4150	// Not used in this mode
wim	30:033048611c01	4151	void TextLCD_SPI_N_3_10::_setData(int value) {
wim	30:033048611c01	4152	}
wim	30:033048611c01	4153
wim	30:033048611c01	4154	// Write a byte using SPI3 10 bits mode
wim	30:033048611c01	4155	void TextLCD_SPI_N_3_10::_writeByte(int value) {
wim	30:033048611c01	4156	_cs = 0;
wim	30:033048611c01	4157	wait_us(1);
wim	30:033048611c01	4158	_spi->write( (_controlbyte << 8) \| (value & 0xFF));
wim	30:033048611c01	4159	wait_us(1);
wim	30:033048611c01	4160	_cs = 1;
wim	30:033048611c01	4161	}
wim	34:e5a0dcb43ecc	4162	#endif /* Native SPI bus */
wim	30:033048611c01	4163	//------- End TextLCD_SPI_N_3_10 ----------
wim	34:e5a0dcb43ecc	4164
wim	32:59c4b8f648d4	4165
wim	32:59c4b8f648d4	4166	//------- Start TextLCD_SPI_N_3_16 --------
wim	34:e5a0dcb43ecc	4167	#if(LCD_SPI_N_3_16 == 1) /* Native SPI bus */
wim	32:59c4b8f648d4	4168
wim	32:59c4b8f648d4	4169	/** Create a TextLCD interface using a controller with a native SPI3 16 bits interface
wim	32:59c4b8f648d4	4170	*
wim	32:59c4b8f648d4	4171	* @param spi SPI Bus
wim	32:59c4b8f648d4	4172	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	4173	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	4174	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	4175	* @param ctrl LCD controller (default = PT6314)
wim	32:59c4b8f648d4	4176	*/
wim	32:59c4b8f648d4	4177	TextLCD_SPI_N_3_16::TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	32:59c4b8f648d4	4178	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	4179	_spi(spi),
wim	32:59c4b8f648d4	4180	_cs(cs) {
wim	32:59c4b8f648d4	4181
wim	32:59c4b8f648d4	4182	// Init CS
wim	32:59c4b8f648d4	4183	_cs = 1;
wim	32:59c4b8f648d4	4184
wim	32:59c4b8f648d4	4185	// Setup the spi for 8 bit data, low steady state clock,
wim	32:59c4b8f648d4	4186	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	4187	_spi->format(8,0);
wim	32:59c4b8f648d4	4188	_spi->frequency(1000000);
wim	32:59c4b8f648d4	4189
wim	32:59c4b8f648d4	4190	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	32:59c4b8f648d4	4191	if (bl != NC) {
wim	32:59c4b8f648d4	4192	_bl = new DigitalOut(bl); //Construct new pin
wim	32:59c4b8f648d4	4193	_bl->write(0); //Deactivate
wim	32:59c4b8f648d4	4194	}
wim	32:59c4b8f648d4	4195	else {
wim	32:59c4b8f648d4	4196	// No Hardware Backlight pin
wim	32:59c4b8f648d4	4197	_bl = NULL; //Construct dummy pin
wim	32:59c4b8f648d4	4198	}
wim	32:59c4b8f648d4	4199
wim	32:59c4b8f648d4	4200	//Sanity check
wim	32:59c4b8f648d4	4201	if (_ctrl & LCD_C_SPI3_16) {
wim	36:9f5f86dfd44a	4202	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	32:59c4b8f648d4	4203	}
wim	32:59c4b8f648d4	4204	else {
wim	32:59c4b8f648d4	4205	error("Error: LCD Controller type does not support native SPI3 16 bits interface\n\r");
wim	32:59c4b8f648d4	4206	}
wim	32:59c4b8f648d4	4207	}
wim	32:59c4b8f648d4	4208
wim	32:59c4b8f648d4	4209	TextLCD_SPI_N_3_16::~TextLCD_SPI_N_3_16() {
wim	32:59c4b8f648d4	4210	if (_bl != NULL) {delete _bl;} // BL pin
wim	32:59c4b8f648d4	4211	}
wim	32:59c4b8f648d4	4212
wim	32:59c4b8f648d4	4213	// Not used in this mode
wim	32:59c4b8f648d4	4214	void TextLCD_SPI_N_3_16::_setEnable(bool value) {
wim	32:59c4b8f648d4	4215	}
wim	32:59c4b8f648d4	4216
wim	32:59c4b8f648d4	4217	// Set RS pin
wim	32:59c4b8f648d4	4218	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	32:59c4b8f648d4	4219	void TextLCD_SPI_N_3_16::_setRS(bool value) {
wim	32:59c4b8f648d4	4220	// The 16bit mode is split in 2 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next byte.
wim	32:59c4b8f648d4	4221	// The 8 actual bits represent either a data or a command byte.
wim	32:59c4b8f648d4	4222	// b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
wim	32:59c4b8f648d4	4223	// 1 1 1 1 1 RW RS 0 d7 d6 d5 d4 d3 d2 d1 d0
wim	32:59c4b8f648d4	4224	//
wim	32:59c4b8f648d4	4225	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	32:59c4b8f648d4	4226	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	32:59c4b8f648d4	4227	//
wim	32:59c4b8f648d4	4228
wim	32:59c4b8f648d4	4229	if (value) {
wim	32:59c4b8f648d4	4230	_controlbyte = 0xFA; // Next byte is data
wim	32:59c4b8f648d4	4231	}
wim	32:59c4b8f648d4	4232	else {
wim	32:59c4b8f648d4	4233	_controlbyte = 0xF8; // Next byte is command
wim	32:59c4b8f648d4	4234	}
wim	32:59c4b8f648d4	4235	}
wim	32:59c4b8f648d4	4236
wim	32:59c4b8f648d4	4237	// Set BL pin
wim	32:59c4b8f648d4	4238	void TextLCD_SPI_N_3_16::_setBL(bool value) {
wim	32:59c4b8f648d4	4239	if (_bl) {
wim	32:59c4b8f648d4	4240	_bl->write(value);
wim	32:59c4b8f648d4	4241	}
wim	32:59c4b8f648d4	4242	}
wim	32:59c4b8f648d4	4243
wim	32:59c4b8f648d4	4244	// Not used in this mode
wim	32:59c4b8f648d4	4245	void TextLCD_SPI_N_3_16::_setData(int value) {
wim	32:59c4b8f648d4	4246	}
wim	34:e5a0dcb43ecc	4247
wim	32:59c4b8f648d4	4248	// Write a byte using SPI3 16 bits mode
wim	32:59c4b8f648d4	4249	void TextLCD_SPI_N_3_16::_writeByte(int value) {
wim	32:59c4b8f648d4	4250	_cs = 0;
wim	32:59c4b8f648d4	4251	wait_us(1);
wim	32:59c4b8f648d4	4252
wim	32:59c4b8f648d4	4253	_spi->write(_controlbyte);
wim	32:59c4b8f648d4	4254
wim	32:59c4b8f648d4	4255	_spi->write(value);
wim	32:59c4b8f648d4	4256
wim	32:59c4b8f648d4	4257	wait_us(1);
wim	32:59c4b8f648d4	4258	_cs = 1;
wim	32:59c4b8f648d4	4259	}
wim	34:e5a0dcb43ecc	4260	#endif /* Native SPI bus */
wim	32:59c4b8f648d4	4261	//------- End TextLCD_SPI_N_3_16 ----------
wim	34:e5a0dcb43ecc	4262
wim	34:e5a0dcb43ecc	4263
wim	32:59c4b8f648d4	4264	//------- Start TextLCD_SPI_N_3_24 --------
wim	34:e5a0dcb43ecc	4265	#if(LCD_SPI_N_3_24 == 1) /* Native SPI bus */
wim	32:59c4b8f648d4	4266
wim	32:59c4b8f648d4	4267	/** Create a TextLCD interface using a controller with a native SPI3 24 bits interface
wim	32:59c4b8f648d4	4268	*
wim	32:59c4b8f648d4	4269	* @param spi SPI Bus
wim	32:59c4b8f648d4	4270	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	4271	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	4272	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	4273	* @param ctrl LCD controller (default = SSD1803)
wim	32:59c4b8f648d4	4274	*/
wim	32:59c4b8f648d4	4275	TextLCD_SPI_N_3_24::TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	32:59c4b8f648d4	4276	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	4277	_spi(spi),
wim	32:59c4b8f648d4	4278	_cs(cs) {
wim	32:59c4b8f648d4	4279
wim	32:59c4b8f648d4	4280	// Init CS
wim	32:59c4b8f648d4	4281	_cs = 1;
wim	32:59c4b8f648d4	4282
wim	34:e5a0dcb43ecc	4283	// Setup the spi for 8 bit data, high steady state clock,
wim	32:59c4b8f648d4	4284	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	34:e5a0dcb43ecc	4285	_spi->format(8,3);
wim	32:59c4b8f648d4	4286	_spi->frequency(1000000);
wim	32:59c4b8f648d4	4287
wim	32:59c4b8f648d4	4288	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	32:59c4b8f648d4	4289	if (bl != NC) {
wim	32:59c4b8f648d4	4290	_bl = new DigitalOut(bl); //Construct new pin
wim	32:59c4b8f648d4	4291	_bl->write(0); //Deactivate
wim	32:59c4b8f648d4	4292	}
wim	32:59c4b8f648d4	4293	else {
wim	32:59c4b8f648d4	4294	// No Hardware Backlight pin
wim	32:59c4b8f648d4	4295	_bl = NULL; //Construct dummy pin
wim	32:59c4b8f648d4	4296	}
wim	32:59c4b8f648d4	4297
wim	32:59c4b8f648d4	4298	//Sanity check
wim	32:59c4b8f648d4	4299	if (_ctrl & LCD_C_SPI3_24) {
wim	36:9f5f86dfd44a	4300	_init(_LCD_DL_8); // Set Datalength to 8 bit for all native serial interfaces
wim	32:59c4b8f648d4	4301	}
wim	32:59c4b8f648d4	4302	else {
wim	32:59c4b8f648d4	4303	error("Error: LCD Controller type does not support native SPI3 24 bits interface\n\r");
wim	32:59c4b8f648d4	4304	}
wim	32:59c4b8f648d4	4305	}
wim	32:59c4b8f648d4	4306
wim	32:59c4b8f648d4	4307	TextLCD_SPI_N_3_24::~TextLCD_SPI_N_3_24() {
wim	32:59c4b8f648d4	4308	if (_bl != NULL) {delete _bl;} // BL pin
wim	32:59c4b8f648d4	4309	}
wim	32:59c4b8f648d4	4310
wim	32:59c4b8f648d4	4311	// Not used in this mode
wim	32:59c4b8f648d4	4312	void TextLCD_SPI_N_3_24::_setEnable(bool value) {
wim	32:59c4b8f648d4	4313	}
wim	32:59c4b8f648d4	4314
wim	32:59c4b8f648d4	4315	// Set RS pin
wim	32:59c4b8f648d4	4316	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	32:59c4b8f648d4	4317	void TextLCD_SPI_N_3_24::_setRS(bool value) {
wim	32:59c4b8f648d4	4318	// The 24bit mode is split in 3 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next two bytes.
wim	32:59c4b8f648d4	4319	// Each byte encodes 4 actual bits. The 8 actual bits represent either a data or a command byte.
wim	32:59c4b8f648d4	4320	// b23 b22 b21 b20 b19 b18 b17 b16 - b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
wim	32:59c4b8f648d4	4321	// 1 1 1 1 1 RW RS 0 d0 d1 d2 d3 0 0 0 0 d4 d5 d6 d7 0 0 0 0
wim	32:59c4b8f648d4	4322	//
wim	32:59c4b8f648d4	4323	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	32:59c4b8f648d4	4324	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	32:59c4b8f648d4	4325	//
wim	32:59c4b8f648d4	4326	// Note: SPI3_24 expects LSB first. This is inconsistent with regular SPI convention (and hardware) that sends MSB first.
wim	32:59c4b8f648d4	4327
wim	32:59c4b8f648d4	4328	if (value) {
wim	32:59c4b8f648d4	4329	_controlbyte = 0xFA; // Next byte is data
wim	32:59c4b8f648d4	4330	}
wim	32:59c4b8f648d4	4331	else {
wim	32:59c4b8f648d4	4332	_controlbyte = 0xF8; // Next byte is command
wim	34:e5a0dcb43ecc	4333	}
wim	32:59c4b8f648d4	4334	}
wim	32:59c4b8f648d4	4335
wim	32:59c4b8f648d4	4336	// Set BL pin
wim	32:59c4b8f648d4	4337	void TextLCD_SPI_N_3_24::_setBL(bool value) {
wim	32:59c4b8f648d4	4338	if (_bl) {
wim	32:59c4b8f648d4	4339	_bl->write(value);
wim	32:59c4b8f648d4	4340	}
wim	32:59c4b8f648d4	4341	}
wim	32:59c4b8f648d4	4342
wim	32:59c4b8f648d4	4343	// Not used in this mode
wim	32:59c4b8f648d4	4344	void TextLCD_SPI_N_3_24::_setData(int value) {
wim	32:59c4b8f648d4	4345	}
wim	32:59c4b8f648d4	4346
wim	32:59c4b8f648d4	4347	//Mapping table to flip the bits around cause SPI3_24 expects LSB first.
wim	32:59c4b8f648d4	4348	const uint8_t map3_24[16] = {0x00, 0x80, 0x40, 0xC0, 0x20, 0xA0, 0x60, 0xE0, 0x10, 0x90, 0x50, 0xD0, 0x30, 0xB0, 0x70, 0xF0};
wim	32:59c4b8f648d4	4349
wim	32:59c4b8f648d4	4350	// Write a byte using SPI3 24 bits mode
wim	32:59c4b8f648d4	4351	void TextLCD_SPI_N_3_24::_writeByte(int value) {
wim	32:59c4b8f648d4	4352	_cs = 0;
wim	32:59c4b8f648d4	4353	wait_us(1);
wim	32:59c4b8f648d4	4354	_spi->write(_controlbyte);
wim	32:59c4b8f648d4	4355
wim	32:59c4b8f648d4	4356	//Map and send the LSB nibble
wim	32:59c4b8f648d4	4357	_spi->write( map3_24[value & 0x0F]);
wim	32:59c4b8f648d4	4358
wim	32:59c4b8f648d4	4359	//Map and send the MSB nibble
wim	32:59c4b8f648d4	4360	_spi->write( map3_24[(value >> 4) & 0x0F]);
wim	32:59c4b8f648d4	4361
wim	32:59c4b8f648d4	4362	wait_us(1);
wim	32:59c4b8f648d4	4363	_cs = 1;
wim	32:59c4b8f648d4	4364	}
wim	34:e5a0dcb43ecc	4365	#endif /* Native SPI bus */
wim	32:59c4b8f648d4	4366	//------- End TextLCD_SPI_N_3_24 ----------

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	30 Nov 2015
Imports:	0
Forks:	0
Commits:	43
Dependents:	0
Dependencies:	0
Followers:	1

TextLCD.cpp@42:8ae59ca7c96c, 2015-11-30 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning