Diff: targets/TARGET_Maxim/TARGET_MAX32630/mxc/spix.h

Revision:

157:ff67d9f36b67

diff -r 95d6b41a828b -r ff67d9f36b67 targets/TARGET_Maxim/TARGET_MAX32630/mxc/spix.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32630/mxc/spix.h	Thu Feb 02 17:01:33 2017 +0000
@@ -0,0 +1,140 @@
+/**
+ * @file
+ * @brief      This is the high level API for the SPI Execute in Place (SPIX)
+ *             module.
+ * @note       If using this SPIX with IAR Embedded Workbench for ARM, it is
+ *             required to define <tt>IAR_SPIX_PRAGMA=1</tt>. This should be
+ *             done under Project->Options-> C/C++ Compiler->Preprocessor in the
+ *             Defined Symbols input box. See the IAR documentation for
+ *             additional information on how to set a preprocessor define in a
+ *             project.
+ */
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-10-10 19:45:55 -0500 (Mon, 10 Oct 2016) $
+ * $Revision: 24674 $
+ *
+ **************************************************************************** */
+
+
+
+#include "mxc_sys.h"
+#include "spix_regs.h"
+
+/* Define to prevent redundant inclusion */
+#ifndef _SPIX_H_
+#define _SPIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @ingroup periphlibs
+ * @defgroup spix SPIX
+ * @brief SPI Execute In Place.
+ * @{
+ */
+
+/* **** Definitions **** */
+/// @brief Options for number of I/O pins to use during for each fetch stage
+typedef enum {
+    SPIX_SINGLE_IO = MXC_V_SPIX_FETCH_CTRL_CMD_WIDTH_SINGLE,
+    SPIX_DUAL_IO = MXC_V_SPIX_FETCH_CTRL_CMD_WIDTH_DUAL_IO,
+    SPIX_QUAD_IO = MXC_V_SPIX_FETCH_CTRL_CMD_WIDTH_QUAD_IO
+} spix_width_t;
+
+/// @brief  Options for number of address bytes to use during fetch
+typedef enum {
+    SPIX_3BYTE_FETCH_ADDR = 0,
+    SPIX_4BYTE_FETCH_ADDR = 1
+} spix_addr_size_t;
+
+/// @brief SPIX fetch configuration.
+typedef struct {
+    spix_width_t cmd_width;                 ///< Number of I/O lines used for command SPI transaction.
+    spix_width_t addr_width;                ///< Number of I/O lines used for address SPI transaction.
+    spix_width_t data_width;                ///< Number of I/O lines used for data SPI transaction.
+    spix_addr_size_t addr_size;             ///< Use 3 or 4 byte addresses for fetches.
+    uint8_t cmd;                            ///< Command value to initiate fetch.
+    uint8_t mode_clocks;                    ///< Number of SPI clocks required during mode phase of fetch.
+    uint8_t no_cmd_mode;                    ///< Read command sent only once.
+    uint16_t mode_data;                     ///< Data sent with mode clocks.
+} spix_fetch_t;
+
+/* **** Globals **** */
+
+/* **** Function Prototypes **** */
+
+ /**
+  * @brief      Configure SPI execute in place clocking.
+  * @param      sys_cfg  Pointer to system level configuration structure.
+  * @param      baud     Frequency in hertz to set the clock to. May not be able
+  *                      to achieve with the given clock divider.
+  * @param      sample   Number of SPIX clocks to delay the sampling of the SDIO
+  *                      lines. Will use feedback mode if set to 0.
+  * @return     #E_NO_ERROR if everything is successful
+  */
+int SPIX_ConfigClock(const sys_cfg_spix_t *sys_cfg, uint32_t baud, uint8_t sample);
+
+/**
+ * @brief      Configure SPI execute in place slave select.
+ * @param      ssel         Index of which slave select line to use.
+ * @param      pol          Polarity of slave select (0 for active low, 1 for
+ *                          active high).
+ * @param      act_delay    SPIX clocks between slave select assert and active
+ *                          SPI clock.
+ * @param      inact_delay  SPIX clocks between active SPI clock and slave
+ *                          select deassert.
+ */
+void SPIX_ConfigSlave(uint8_t ssel, uint8_t pol, uint8_t act_delay, uint8_t inact_delay);
+
+/**
+ * @brief      Configure how the SPIX fetches data.
+ * @param      fetch  Pointer to configuration struct that describes how to
+ *                    fetch data.
+ */
+void SPIX_ConfigFetch(const spix_fetch_t *fetch);
+
+/**
+ * @brief      Shutdown SPIX module.
+ * @param      spix  Pointer to SPIX regs.
+ * @return     #E_NO_ERROR if everything is successful
+ */
+int SPIX_Shutdown(mxc_spix_regs_t *spix);
+
+/**@} end of group spix */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _SPIX_H */