Diff: targets/TARGET_Maxim/TARGET_MAX32630/mxc/flc.c

Revision:

157:ff67d9f36b67

diff -r 95d6b41a828b -r ff67d9f36b67 targets/TARGET_Maxim/TARGET_MAX32630/mxc/flc.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32630/mxc/flc.c	Thu Feb 02 17:01:33 2017 +0000
@@ -0,0 +1,260 @@
+/**
+ * @file
+ * @brief      This file contains the function implementations for the Flash
+ *             Controller (FLC) peripheral module.
+ */
+
+/* ****************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-09-09 11:48:21 -0500 (Fri, 09 Sep 2016) $
+ * $Revision: 24338 $
+ *
+ *************************************************************************** */
+
+/* **** Includes **** */
+#include "mxc_config.h"
+#include "flc.h"
+
+
+/**
+ * @ingroup flc
+ * @{
+ */
+    
+/* **** Definitions **** */
+
+/* **** Globals **** */
+
+/* **** Functions **** */
+
+/* ************************************************************************* */
+#if defined ( __GNUC__ )
+#undef IAR_PRAGMAS //Make sure this is not defined for GCC
+#endif
+
+#if IAR_PRAGMAS
+// IAR memory section declaration for the in-system flash programming functions to be loaded in RAM.
+#pragma section=".flashprog"
+#endif
+#if defined ( __GNUC__ )
+__attribute__ ((section(".flashprog")))
+#endif
+/**
+ * @brief      Return the status of the busy state of the flash controller. 
+ *
+ * @return     0 Flash Controller is idle.
+ * @return     Non-zero indicates the flash controller is performing an 
+ *             erase or write request. 
+ */
+__STATIC_INLINE int FLC_Busy(void)
+{
+    return (MXC_FLC->ctrl & (MXC_F_FLC_CTRL_WRITE | MXC_F_FLC_CTRL_MASS_ERASE | MXC_F_FLC_CTRL_PAGE_ERASE));
+}
+
+/* ************************************************************************* */
+#if IAR_PRAGMAS
+// IAR memory section declaration for the in-system flash programming functions to be loaded in RAM.
+#pragma section=".flashprog"
+#endif
+#if defined ( __GNUC__ )
+__attribute__ ((section(".flashprog")))
+#endif
+int FLC_Init(void)
+{
+    /* Check if the flash controller is busy */
+    if (FLC_Busy()) {
+        return E_BUSY;
+    }
+
+    /* Enable automatic calculation of the clock divider to generate a 1MHz clock from the APB clock */
+    MXC_FLC->perform |= MXC_F_FLC_PERFORM_AUTO_CLKDIV;
+
+    /* The flash controller will stall any reads while flash operations are in
+     * progress. Disable the legacy failure detection logic that would flag reads
+     * during flash operations as errors.
+     */
+    MXC_FLC->perform |= MXC_F_FLC_PERFORM_EN_PREVENT_FAIL;
+
+    return E_NO_ERROR;
+}
+
+/* ************************************************************************* */
+#if IAR_PRAGMAS
+// IAR memory section declaration for the in-system flash programming functions to be loaded in RAM.
+#pragma section=".flashprog"
+#endif
+#if defined ( __GNUC__ )
+__attribute__ ((section(".flashprog")))
+#endif
+int FLC_PageErase(uint32_t address, uint8_t erase_code, uint8_t unlock_key)
+{
+    /* Check if the flash controller is busy */
+    if (FLC_Busy()) {
+        return E_BUSY;
+    }
+
+    /* Clear stale errors. Interrupt flags can only be written to zero, so this is safe */
+    MXC_FLC->intr &= ~MXC_F_FLC_INTR_FAILED_IF;
+
+    /* Unlock flash */
+    MXC_FLC->ctrl = (MXC_FLC->ctrl & ~MXC_F_FLC_CTRL_FLSH_UNLOCK) |
+                    ((unlock_key << MXC_F_FLC_CTRL_FLSH_UNLOCK_POS) & MXC_F_FLC_CTRL_FLSH_UNLOCK);
+
+    /* Write the Erase Code */
+    MXC_FLC->ctrl = (MXC_FLC->ctrl & ~MXC_F_FLC_CTRL_ERASE_CODE) |
+                    ((erase_code << MXC_F_FLC_CTRL_ERASE_CODE_POS) & MXC_F_FLC_CTRL_ERASE_CODE);
+
+    /* Erase the request page */
+    MXC_FLC->faddr = address;
+    MXC_FLC->ctrl |= MXC_F_FLC_CTRL_PAGE_ERASE;
+
+    /* Wait until flash operation is complete */
+    while (FLC_Busy());
+
+    /* Lock flash */
+    MXC_FLC->ctrl &= ~(MXC_F_FLC_CTRL_FLSH_UNLOCK | MXC_F_FLC_CTRL_ERASE_CODE);
+
+    /* Check for failures */
+    if (MXC_FLC->intr & MXC_F_FLC_INTR_FAILED_IF) {
+        /* Interrupt flags can only be written to zero, so this is safe */
+        MXC_FLC->intr &= ~MXC_F_FLC_INTR_FAILED_IF;
+        return E_UNKNOWN;
+    }
+
+    return E_NO_ERROR;
+}
+
+/* ************************************************************************* */
+#if IAR_PRAGMAS
+// IAR memory section declaration for the in-system flash programming functions to be loaded in RAM.
+#pragma section=".flashprog"
+#endif
+#if defined ( __GNUC__ )
+__attribute__ ((section(".flashprog")))
+#endif
+int FLC_Write(uint32_t address, const void *data, uint32_t length, uint8_t unlock_key)
+{
+    uint32_t *ptr = (uint32_t*)data;
+
+    /* Can only write in full word units */
+    if ((address & 3) || (length & 3)) {
+        return E_BAD_PARAM;
+    }
+
+    if (length == 0) {
+        /* Nothing to do */
+        return E_NO_ERROR;
+    }
+
+    /* Check if the flash controller is busy */
+    if (FLC_Busy()) {
+        return E_BUSY;
+    }
+
+    /* Clear stale errors. Interrupt flags can only be written to zero, so this is safe */
+    MXC_FLC->intr &= ~MXC_F_FLC_INTR_FAILED_IF;
+
+    /* Unlock flash */
+    MXC_FLC->ctrl = (MXC_FLC->ctrl & ~MXC_F_FLC_CTRL_FLSH_UNLOCK) |
+                    ((unlock_key << MXC_F_FLC_CTRL_FLSH_UNLOCK_POS) & MXC_F_FLC_CTRL_FLSH_UNLOCK);
+
+    /* Set the address to write and enable auto increment */
+    MXC_FLC->faddr = address;
+    MXC_FLC->ctrl |= MXC_F_FLC_CTRL_AUTO_INCRE_MODE;
+    uint32_t write_cmd = MXC_FLC->ctrl | MXC_F_FLC_CTRL_WRITE;
+
+    for (; length > 0; length -= 4) {
+        /* Perform the write */
+        MXC_FLC->fdata = *ptr++;
+        MXC_FLC->ctrl = write_cmd;
+        while (FLC_Busy());
+    }
+
+    /* Lock flash */
+    MXC_FLC->ctrl &= ~MXC_F_FLC_CTRL_FLSH_UNLOCK;
+
+    /* Check for failures */
+    if (MXC_FLC->intr & MXC_F_FLC_INTR_FAILED_IF) {
+        /* Interrupt flags can only be written to zero, so this is safe */
+        MXC_FLC->intr &= ~MXC_F_FLC_INTR_FAILED_IF;
+        return E_UNKNOWN;
+    }
+
+    return E_NO_ERROR;
+}
+
+/* ************************************************************************* */
+#if IAR_PRAGMAS
+// IAR memory section declaration for the in-system flash programming functions to be loaded in RAM.
+#pragma section=".flashprog"
+#endif
+#if defined ( __GNUC__ )
+__attribute__ ((section(".flashprog")))
+#endif
+int FLC_MassErase(uint8_t erase_code, uint8_t unlock_key)
+{
+    /* Check if the flash controller is busy */
+    if (FLC_Busy()) {
+        return E_BUSY;
+    }
+
+    /* Clear stale errors. Interrupt flags can only be written to zero, so this is safe */
+    MXC_FLC->intr &= ~MXC_F_FLC_INTR_FAILED_IF;
+
+    /* Unlock flash */
+    MXC_FLC->ctrl = (MXC_FLC->ctrl & ~MXC_F_FLC_CTRL_FLSH_UNLOCK) |
+                    ((unlock_key << MXC_F_FLC_CTRL_FLSH_UNLOCK_POS) & MXC_F_FLC_CTRL_FLSH_UNLOCK);
+
+    /* Write the Erase Code */
+    MXC_FLC->ctrl = (MXC_FLC->ctrl & ~MXC_F_FLC_CTRL_ERASE_CODE) |
+                    ((erase_code << MXC_F_FLC_CTRL_ERASE_CODE_POS) & MXC_F_FLC_CTRL_ERASE_CODE);
+
+    /* Start the mass erase */
+    MXC_FLC->ctrl |= MXC_F_FLC_CTRL_MASS_ERASE;
+
+    /* Wait until flash operation is complete */
+    while (FLC_Busy());
+
+    /* Lock flash */
+    MXC_FLC->ctrl &= ~(MXC_F_FLC_CTRL_FLSH_UNLOCK | MXC_F_FLC_CTRL_ERASE_CODE);
+
+    /* Check for failures */
+    if (MXC_FLC->intr & MXC_F_FLC_INTR_FAILED_IF) {
+        /* Interrupt flags can only be written to zero, so this is safe */
+        MXC_FLC->intr &= ~MXC_F_FLC_INTR_FAILED_IF;
+        return E_UNKNOWN;
+    }
+
+    return E_NO_ERROR;
+}
+
+/**@} end of group flc */