Umar Naeem
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
Umar Naeem
Diff: targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/PinNames.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,156 +1,156 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 5
-
-typedef enum {
- // LPC1347 Pin Names
- P0_0 = 0,
- P0_1 = 1,
- P0_2 = 2,
- P0_3 = 3,
- P0_4 = 4,
- P0_5 = 5,
- P0_6 = 6,
- P0_7 = 7,
- P0_8 = 8,
- P0_9 = 9,
- P0_10 = 10,
- P0_11 = 11,
- P0_12 = 12,
- P0_13 = 13,
- P0_14 = 14,
- P0_15 = 15,
- P0_16 = 16,
- P0_17 = 17,
- P0_18 = 18,
- P0_19 = 19,
- P0_20 = 20,
- P0_21 = 21,
- P0_22 = 22,
- P0_23 = 23,
-
- P1_13 = 45,
- P1_14 = 46,
- P1_15 = 47,
- P1_16 = 48,
-
- P1_19 = 51,
- P1_20 = 52,
- P1_21 = 53,
- P1_22 = 54,
- P1_23 = 55,
- P1_24 = 56,
- P1_25 = 57,
- P1_26 = 58,
- P1_27 = 59,
- P1_28 = 60,
- P1_29 = 61,
-
- P1_31 = 63,
-
- // DIP Pin Names
- p1 = P0_0,
- p2 = P0_11,
- p3 = P0_12,
- p4 = P0_13,
- p5 = P0_14,
- p6 = P1_31,
- p8 = P0_16,
- p9 = P0_22,
- p10 = P0_23,
- p13 = P1_29,
- p14 = P1_21,
- p15 = P0_8,
- p16 = P0_9,
- p17 = P1_24,
- p18 = P0_4,
- p19 = P1_13,
- p20 = P1_14,
- p21 = P1_22,
- p22 = P0_17,
- p23 = P0_5,
- p24 = P0_21,
- p25 = P0_19,
- p26 = P0_18,
- p27 = P1_15,
- p28 = P1_16,
- p29 = P1_25,
- p30 = P1_19,
- p33 = P0_20,
- p34 = P0_2,
- p35 = P1_26,
- p36 = P1_27,
- p37 = P1_20,
- p38 = P1_23,
- p39 = P0_7,
- p40 = P1_28,
-
- UART_TX = P0_19,
- UART_RX = P0_18,
-
- // Not connected
- NC = (int)0xFFFFFFFF,
-
- LED1 = p21,
- LED2 = p21,
- LED3 = p21,
- LED4 = p21,
-
- // Standard but not supported pins
- USBTX = NC,
- USBRX = NC,
-
-} PinName;
-
-typedef enum {
- CHANNEL0 = PIN_INT0_IRQn,
- CHANNEL1 = PIN_INT1_IRQn,
- CHANNEL2 = PIN_INT2_IRQn,
- CHANNEL3 = PIN_INT3_IRQn,
- CHANNEL4 = PIN_INT4_IRQn,
- CHANNEL5 = PIN_INT5_IRQn,
- CHANNEL6 = PIN_INT6_IRQn,
- CHANNEL7 = PIN_INT7_IRQn
-} Channel;
-
-typedef enum {
- PullUp = 2,
- PullDown = 1,
- PullNone = 0,
- Repeater = 3,
- OpenDrain = 4,
- PullDefault = PullDown
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC1347 Pin Names
+ P0_0 = 0,
+ P0_1 = 1,
+ P0_2 = 2,
+ P0_3 = 3,
+ P0_4 = 4,
+ P0_5 = 5,
+ P0_6 = 6,
+ P0_7 = 7,
+ P0_8 = 8,
+ P0_9 = 9,
+ P0_10 = 10,
+ P0_11 = 11,
+ P0_12 = 12,
+ P0_13 = 13,
+ P0_14 = 14,
+ P0_15 = 15,
+ P0_16 = 16,
+ P0_17 = 17,
+ P0_18 = 18,
+ P0_19 = 19,
+ P0_20 = 20,
+ P0_21 = 21,
+ P0_22 = 22,
+ P0_23 = 23,
+
+ P1_13 = 45,
+ P1_14 = 46,
+ P1_15 = 47,
+ P1_16 = 48,
+
+ P1_19 = 51,
+ P1_20 = 52,
+ P1_21 = 53,
+ P1_22 = 54,
+ P1_23 = 55,
+ P1_24 = 56,
+ P1_25 = 57,
+ P1_26 = 58,
+ P1_27 = 59,
+ P1_28 = 60,
+ P1_29 = 61,
+
+ P1_31 = 63,
+
+ // DIP Pin Names
+ p1 = P0_0,
+ p2 = P0_11,
+ p3 = P0_12,
+ p4 = P0_13,
+ p5 = P0_14,
+ p6 = P1_31,
+ p8 = P0_16,
+ p9 = P0_22,
+ p10 = P0_23,
+ p13 = P1_29,
+ p14 = P1_21,
+ p15 = P0_8,
+ p16 = P0_9,
+ p17 = P1_24,
+ p18 = P0_4,
+ p19 = P1_13,
+ p20 = P1_14,
+ p21 = P1_22,
+ p22 = P0_17,
+ p23 = P0_5,
+ p24 = P0_21,
+ p25 = P0_19,
+ p26 = P0_18,
+ p27 = P1_15,
+ p28 = P1_16,
+ p29 = P1_25,
+ p30 = P1_19,
+ p33 = P0_20,
+ p34 = P0_2,
+ p35 = P1_26,
+ p36 = P1_27,
+ p37 = P1_20,
+ p38 = P1_23,
+ p39 = P0_7,
+ p40 = P1_28,
+
+ UART_TX = P0_19,
+ UART_RX = P0_18,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+ LED1 = p21,
+ LED2 = p21,
+ LED3 = p21,
+ LED4 = p21,
+
+ // Standard but not supported pins
+ USBTX = NC,
+ USBRX = NC,
+
+} PinName;
+
+typedef enum {
+ CHANNEL0 = PIN_INT0_IRQn,
+ CHANNEL1 = PIN_INT1_IRQn,
+ CHANNEL2 = PIN_INT2_IRQn,
+ CHANNEL3 = PIN_INT3_IRQn,
+ CHANNEL4 = PIN_INT4_IRQn,
+ CHANNEL5 = PIN_INT5_IRQn,
+ CHANNEL6 = PIN_INT6_IRQn,
+ CHANNEL7 = PIN_INT7_IRQn
+} Channel;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif