Umar Naeem
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
Umar Naeem
Diff: targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h
--- a/targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/PinNames.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,181 +1,181 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2014 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 16
-#define PIN_SHIFT 9
-
-typedef enum {
- // LPC11U68 Pin Names (PORT[19:16] + PIN[15:9] + IOCON offset[8:0])
-
- P0_0 = (0 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x000,
- P0_1 = (0 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x004,
- P0_2 = (0 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x008,
- P0_3 = (0 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x00C,
- P0_4 = (0 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x010,
- P0_5 = (0 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x014,
- P0_6 = (0 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x018,
- P0_7 = (0 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x01C,
- P0_8 = (0 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x020,
- P0_9 = (0 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x024,
- P0_10= (0 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x028,
- P0_11= (0 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x02C,
- P0_12= (0 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x030,
- P0_13= (0 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x034,
- P0_14= (0 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x038,
- P0_15= (0 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x03C,
- P0_16= (0 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x040,
- P0_17= (0 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x044,
- P0_18= (0 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x048,
- P0_19= (0 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x04C,
- P0_20= (0 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x050,
- P0_21= (0 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x054,
- P0_22= (0 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x058,
- P0_23= (0 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x05C,
-
- P1_0 = (1 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x060,
- P1_1 = (1 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x064,
- P1_2 = (1 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x068,
- P1_3 = (1 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x06C,
- P1_4 = (1 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x070,
- P1_5 = (1 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x074,
- P1_6 = (1 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x078,
- P1_7 = (1 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x07C,
- P1_8 = (1 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x080,
- P1_9 = (1 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x084,
- P1_10= (1 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x088,
- P1_11= (1 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x08C,
- P1_12= (1 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x090,
- P1_13= (1 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x094,
- P1_14= (1 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x098,
- P1_15= (1 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x09C,
- P1_16= (1 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x0A0,
- P1_17= (1 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x0A4,
- P1_18= (1 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x0A8,
- P1_19= (1 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x0AC,
- P1_20= (1 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x0B0,
- P1_21= (1 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x0B4,
- P1_22= (1 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x0B8,
- P1_23= (1 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x0BC,
- P1_24= (1 << PORT_SHIFT) | (24<< PIN_SHIFT) | 0x0C0,
- P1_25= (1 << PORT_SHIFT) | (25<< PIN_SHIFT) | 0x0C4,
- P1_26= (1 << PORT_SHIFT) | (26<< PIN_SHIFT) | 0x0C8,
- P1_27= (1 << PORT_SHIFT) | (27<< PIN_SHIFT) | 0x0CC,
- P1_28= (1 << PORT_SHIFT) | (28<< PIN_SHIFT) | 0x0D0,
- P1_29= (1 << PORT_SHIFT) | (29<< PIN_SHIFT) | 0x0D4,
- P1_30= (1 << PORT_SHIFT) | (30<< PIN_SHIFT) | 0x0D8,
- P1_31= (1 << PORT_SHIFT) | (31<< PIN_SHIFT) | 0x0DC,
-
- P2_0 = (2 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x0F0,
- P2_1 = (2 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x0F4,
- P2_2 = (2 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x0FC,
- P2_3 = (2 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x100,
- P2_4 = (2 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x104,
- P2_5 = (2 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x108,
- P2_6 = (2 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x10C,
- P2_7 = (2 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x110,
- P2_8 = (2 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x114,
- P2_9 = (2 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x118,
- P2_10= (2 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x11C,
- P2_11= (2 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x120,
- P2_12= (2 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x124,
- P2_13= (2 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x128,
- P2_14= (2 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x12C,
- P2_15= (2 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x130,
- P2_16= (2 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x134,
- P2_17= (2 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x138,
- P2_18= (2 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x13C,
- P2_19= (2 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x140,
- P2_20= (2 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x144,
- P2_21= (2 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x148,
- P2_22= (2 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x14C,
- P2_23= (2 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x150,
-
- LED_RED = P2_17,
- LED_GREEN = P2_16,
- LED_BLUE = P2_18,
-
- // mbed original LED naming
- LED1 = LED_RED,
- LED2 = LED_GREEN,
- LED3 = LED_BLUE,
- LED4 = LED_BLUE,
-
- // Serial to USB pins
- USBTX = P0_19,
- USBRX = P0_18,
-
- // Arduino Shield Receptacles Names
- D0 = P0_18,
- D1 = P0_19,
- D2 = P1_18,
- D3 = P1_24,
- D4 = P1_19,
- D5 = P1_26,
- D6 = P1_27,
- D7 = P1_25,
- D8 = P1_28,
- D9 = P2_3,
- D10= P0_2,
- D11= P0_9,
- D12= P0_8,
- D13= P1_29,
- D14= P0_5,
- D15= P0_4,
-
- A0 = P1_9,
- A1 = P0_14,
- A2 = P0_13,
- A3 = P0_12,
- A4 = P0_5, // same port as SDA
- A5 = P0_4, // same port as SCL
- SDA= P0_5, // same port as A4
- SCL= P0_4, // same port as A5
-
- // Not connected
- NC = (int)0xFFFFFFFF,
-} PinName;
-
-typedef enum {
- PullUp = 2,
- PullDown = 1,
- PullNone = 0,
- Repeater = 3,
- OpenDrain = 4,
- PullDefault = PullDown
-} PinMode;
-
-#define STDIO_UART_TX USBTX
-#define STDIO_UART_RX USBRX
-#define STDIO_UART UART_0
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2014 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 16
+#define PIN_SHIFT 9
+
+typedef enum {
+ // LPC11U68 Pin Names (PORT[19:16] + PIN[15:9] + IOCON offset[8:0])
+
+ P0_0 = (0 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x000,
+ P0_1 = (0 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x004,
+ P0_2 = (0 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x008,
+ P0_3 = (0 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x00C,
+ P0_4 = (0 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x010,
+ P0_5 = (0 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x014,
+ P0_6 = (0 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x018,
+ P0_7 = (0 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x01C,
+ P0_8 = (0 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x020,
+ P0_9 = (0 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x024,
+ P0_10= (0 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x028,
+ P0_11= (0 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x02C,
+ P0_12= (0 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x030,
+ P0_13= (0 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x034,
+ P0_14= (0 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x038,
+ P0_15= (0 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x03C,
+ P0_16= (0 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x040,
+ P0_17= (0 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x044,
+ P0_18= (0 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x048,
+ P0_19= (0 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x04C,
+ P0_20= (0 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x050,
+ P0_21= (0 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x054,
+ P0_22= (0 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x058,
+ P0_23= (0 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x05C,
+
+ P1_0 = (1 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x060,
+ P1_1 = (1 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x064,
+ P1_2 = (1 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x068,
+ P1_3 = (1 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x06C,
+ P1_4 = (1 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x070,
+ P1_5 = (1 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x074,
+ P1_6 = (1 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x078,
+ P1_7 = (1 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x07C,
+ P1_8 = (1 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x080,
+ P1_9 = (1 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x084,
+ P1_10= (1 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x088,
+ P1_11= (1 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x08C,
+ P1_12= (1 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x090,
+ P1_13= (1 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x094,
+ P1_14= (1 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x098,
+ P1_15= (1 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x09C,
+ P1_16= (1 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x0A0,
+ P1_17= (1 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x0A4,
+ P1_18= (1 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x0A8,
+ P1_19= (1 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x0AC,
+ P1_20= (1 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x0B0,
+ P1_21= (1 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x0B4,
+ P1_22= (1 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x0B8,
+ P1_23= (1 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x0BC,
+ P1_24= (1 << PORT_SHIFT) | (24<< PIN_SHIFT) | 0x0C0,
+ P1_25= (1 << PORT_SHIFT) | (25<< PIN_SHIFT) | 0x0C4,
+ P1_26= (1 << PORT_SHIFT) | (26<< PIN_SHIFT) | 0x0C8,
+ P1_27= (1 << PORT_SHIFT) | (27<< PIN_SHIFT) | 0x0CC,
+ P1_28= (1 << PORT_SHIFT) | (28<< PIN_SHIFT) | 0x0D0,
+ P1_29= (1 << PORT_SHIFT) | (29<< PIN_SHIFT) | 0x0D4,
+ P1_30= (1 << PORT_SHIFT) | (30<< PIN_SHIFT) | 0x0D8,
+ P1_31= (1 << PORT_SHIFT) | (31<< PIN_SHIFT) | 0x0DC,
+
+ P2_0 = (2 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x0F0,
+ P2_1 = (2 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x0F4,
+ P2_2 = (2 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x0FC,
+ P2_3 = (2 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x100,
+ P2_4 = (2 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x104,
+ P2_5 = (2 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x108,
+ P2_6 = (2 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x10C,
+ P2_7 = (2 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x110,
+ P2_8 = (2 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x114,
+ P2_9 = (2 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x118,
+ P2_10= (2 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x11C,
+ P2_11= (2 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x120,
+ P2_12= (2 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x124,
+ P2_13= (2 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x128,
+ P2_14= (2 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x12C,
+ P2_15= (2 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x130,
+ P2_16= (2 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x134,
+ P2_17= (2 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x138,
+ P2_18= (2 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x13C,
+ P2_19= (2 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x140,
+ P2_20= (2 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x144,
+ P2_21= (2 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x148,
+ P2_22= (2 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x14C,
+ P2_23= (2 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x150,
+
+ LED_RED = P2_17,
+ LED_GREEN = P2_16,
+ LED_BLUE = P2_18,
+
+ // mbed original LED naming
+ LED1 = LED_RED,
+ LED2 = LED_GREEN,
+ LED3 = LED_BLUE,
+ LED4 = LED_BLUE,
+
+ // Serial to USB pins
+ USBTX = P0_19,
+ USBRX = P0_18,
+
+ // Arduino Shield Receptacles Names
+ D0 = P0_18,
+ D1 = P0_19,
+ D2 = P1_18,
+ D3 = P1_24,
+ D4 = P1_19,
+ D5 = P1_26,
+ D6 = P1_27,
+ D7 = P1_25,
+ D8 = P1_28,
+ D9 = P2_3,
+ D10= P0_2,
+ D11= P0_9,
+ D12= P0_8,
+ D13= P1_29,
+ D14= P0_5,
+ D15= P0_4,
+
+ A0 = P1_9,
+ A1 = P0_14,
+ A2 = P0_13,
+ A3 = P0_12,
+ A4 = P0_5, // same port as SDA
+ A5 = P0_4, // same port as SCL
+ SDA= P0_5, // same port as A4
+ SCL= P0_4, // same port as A5
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+#define STDIO_UART UART_0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif