mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
targets/TARGET_ONSEMI/TARGET_NCS36510/objects.h@165:2dd56e6daeec, 2017-05-23 (annotated)
- Committer:
- ranaumarnaeem
- Date:
- Tue May 23 12:54:50 2017 +0000
- Revision:
- 165:2dd56e6daeec
- Parent:
- 153:fa9ff456f731
jhjg
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 149:156823d33999 | 1 | /** |
<> | 149:156823d33999 | 2 | ****************************************************************************** |
<> | 149:156823d33999 | 3 | * @file Objects.h |
<> | 149:156823d33999 | 4 | * @brief Implements an assertion. |
<> | 149:156823d33999 | 5 | * @internal |
<> | 149:156823d33999 | 6 | * @author ON Semiconductor |
<> | 149:156823d33999 | 7 | * $Rev: 0.1 $ |
<> | 149:156823d33999 | 8 | * $Date: 2015-11-06 $ |
<> | 149:156823d33999 | 9 | ****************************************************************************** |
<> | 149:156823d33999 | 10 | * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). |
<> | 149:156823d33999 | 11 | * All rights reserved. This software and/or documentation is licensed by ON Semiconductor |
<> | 149:156823d33999 | 12 | * under limited terms and conditions. The terms and conditions pertaining to the software |
<> | 149:156823d33999 | 13 | * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf |
<> | 149:156823d33999 | 14 | * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and |
<> | 149:156823d33999 | 15 | * if applicable the software license agreement. Do not use this software and/or |
<> | 149:156823d33999 | 16 | * documentation unless you have carefully read and you agree to the limited terms and |
<> | 149:156823d33999 | 17 | * conditions. By using this software and/or documentation, you agree to the limited |
<> | 149:156823d33999 | 18 | * terms and conditions. |
<> | 149:156823d33999 | 19 | * |
<> | 149:156823d33999 | 20 | * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED |
<> | 149:156823d33999 | 21 | * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF |
<> | 149:156823d33999 | 22 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. |
<> | 149:156823d33999 | 23 | * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, |
<> | 149:156823d33999 | 24 | * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
<> | 149:156823d33999 | 25 | * @endinternal |
<> | 149:156823d33999 | 26 | * |
<> | 149:156823d33999 | 27 | * @ingroup debug |
<> | 149:156823d33999 | 28 | */ |
<> | 149:156823d33999 | 29 | #ifndef OBJECTS_H_ |
<> | 149:156823d33999 | 30 | #define OBJECTS_H_ |
<> | 149:156823d33999 | 31 | |
<> | 149:156823d33999 | 32 | |
<> | 149:156823d33999 | 33 | #ifdef __cplusplus |
<> | 149:156823d33999 | 34 | extern "C" { |
<> | 149:156823d33999 | 35 | #endif |
<> | 149:156823d33999 | 36 | |
<> | 149:156823d33999 | 37 | #include "gpio_map.h" |
<> | 149:156823d33999 | 38 | #include "uart_16c550_map.h" |
<> | 149:156823d33999 | 39 | #include "PinNames.h" |
<> | 149:156823d33999 | 40 | #include "PortNames.h" |
<> | 149:156823d33999 | 41 | #include "PeripheralNames.h" |
<> | 149:156823d33999 | 42 | #include "target_config.h" |
<> | 149:156823d33999 | 43 | #include "spi.h" |
<> | 149:156823d33999 | 44 | |
<> | 149:156823d33999 | 45 | typedef enum { |
<> | 149:156823d33999 | 46 | FlowControlNone_1, |
<> | 149:156823d33999 | 47 | FlowControlRTS_1, |
<> | 149:156823d33999 | 48 | FlowControlCTS_1, |
<> | 149:156823d33999 | 49 | FlowControlRTSCTS_1 |
<> | 149:156823d33999 | 50 | } FlowControl_1; |
<> | 149:156823d33999 | 51 | |
<> | 149:156823d33999 | 52 | struct serial_s { |
<> | 149:156823d33999 | 53 | Uart16C550Reg_pt UARTREG; |
<> | 149:156823d33999 | 54 | FlowControl_1 FlowCtrl; |
<> | 149:156823d33999 | 55 | IRQn_Type IRQType; |
<> | 149:156823d33999 | 56 | int index; |
<> | 149:156823d33999 | 57 | }; |
<> | 149:156823d33999 | 58 | |
<> | 149:156823d33999 | 59 | typedef struct _gpio_t { |
<> | 149:156823d33999 | 60 | GpioReg_pt GPIOMEMBASE; |
<> | 149:156823d33999 | 61 | PinName gpioPin; |
<> | 149:156823d33999 | 62 | uint32_t gpioMask; |
<> | 149:156823d33999 | 63 | |
<> | 149:156823d33999 | 64 | } gpio_t; |
<> | 149:156823d33999 | 65 | |
<> | 149:156823d33999 | 66 | |
<> | 149:156823d33999 | 67 | /* TODO: This is currently a dummy structure; implementation will be done along |
<> | 149:156823d33999 | 68 | * with the sleep API implementation |
<> | 149:156823d33999 | 69 | */ |
<> | 149:156823d33999 | 70 | typedef struct sleep_s { |
<> | 149:156823d33999 | 71 | uint32_t timeToSleep; /* 0: Use sleep type variable to select low power mode; Noz-zero: Selects sleep type based on timeToSleep duration using table 1. sleep below */ |
<> | 149:156823d33999 | 72 | uint8_t SleepType; /* 0: Sleep; 1: DeepSleep; 2: Coma */ |
<> | 149:156823d33999 | 73 | } sleep_t; |
<> | 149:156823d33999 | 74 | |
<> | 149:156823d33999 | 75 | /* Table 1. Sleep |
<> | 149:156823d33999 | 76 | ___________________________________________________________________________________ |
<> | 149:156823d33999 | 77 | | Sleep duration | Sleep Type | |
<> | 149:156823d33999 | 78 | |-------------------------------------------------------------------|---------------| |
<> | 149:156823d33999 | 79 | | > Zero AND <= SLEEP_DURATION_SLEEP_MAX | sleep | |
<> | 149:156823d33999 | 80 | | > SLEEP_DURATION_SLEEP_MAX AND <= SLEEP_DURATION_DEEPSLEEP_MAX | deepsleep | |
<> | 149:156823d33999 | 81 | | > SLEEP_DURATION_DEEPSLEEP_MAX | coma | |
<> | 149:156823d33999 | 82 | |___________________________________________________________________|_______________| |
<> | 149:156823d33999 | 83 | |
<> | 149:156823d33999 | 84 | */ |
<> | 149:156823d33999 | 85 | |
<> | 149:156823d33999 | 86 | struct gpio_irq_s { |
<> | 149:156823d33999 | 87 | uint32_t pin; |
<> | 149:156823d33999 | 88 | uint32_t pinMask; |
<> | 149:156823d33999 | 89 | GpioReg_pt GPIOMEMBASE; |
<> | 149:156823d33999 | 90 | }; |
<> | 149:156823d33999 | 91 | |
<> | 149:156823d33999 | 92 | typedef struct { |
<> | 149:156823d33999 | 93 | |
<> | 149:156823d33999 | 94 | /* options to configure the ADC */ |
<> | 149:156823d33999 | 95 | uint8_t interruptConfig; /**< 1= interrupt Enable 0=Interrupt Disable */ |
<> | 149:156823d33999 | 96 | uint8_t PrescaleVal; /**< Prescaler: Sets the converter clock frequency. Fclk = 32 MHz/(prescaler + 1) where prescaler is the value of this register segment. The minimum tested value is 07 (4 MHz clock) */ |
<> | 149:156823d33999 | 97 | uint8_t measurementType; /**< 1= Absolute 0= Differential */ |
<> | 149:156823d33999 | 98 | uint8_t mode; /**< 1= Continuous Conversion 0= Single Shot */ |
<> | 149:156823d33999 | 99 | uint8_t referenceCh; /**< Selects 1 to 8 channels for reference channel */ |
<> | 149:156823d33999 | 100 | uint8_t convCh; /**< Selects 1 or 8 channels to do a conversion on.*/ |
<> | 149:156823d33999 | 101 | uint8_t inputScale; /**< Sets the input scale, 000 ? 1.0, 001 ? 0.6923, 010 ? 0.5294, 011 ? 0.4286, 100 ? 0.3600, 101 ? 0.3103, 110 ? 0.2728, 111 ? 0.2432 */ |
<> | 149:156823d33999 | 102 | uint8_t samplingTime; /**< Sample Time. Sets the measure time in units of PCLKperiod * (Prescale + 1).*/ |
<> | 149:156823d33999 | 103 | uint8_t WarmUpTime; /**< The number of converter clock cycles that the state machine dwells in the warm or warm_meas state */ |
<> | 149:156823d33999 | 104 | uint16_t samplingRate; /**< Sets the sample rate in units of PCLKperiod * (Prescale + 1). */ |
<> | 149:156823d33999 | 105 | |
<> | 149:156823d33999 | 106 | } analog_config_s; |
<> | 149:156823d33999 | 107 | |
<> | 149:156823d33999 | 108 | struct analogin_s { |
<> | 149:156823d33999 | 109 | |
<> | 149:156823d33999 | 110 | analog_config_s *adcConf; |
<> | 149:156823d33999 | 111 | AdcReg_pt adcReg; |
<> | 149:156823d33999 | 112 | PinName pin; |
<> | 149:156823d33999 | 113 | uint8_t pinFlag; |
<> | 153:fa9ff456f731 | 114 | uint32_t ADC_Offset_Value; |
<> | 149:156823d33999 | 115 | }; |
<> | 149:156823d33999 | 116 | |
<> | 149:156823d33999 | 117 | struct pwmout_s { |
<> | 149:156823d33999 | 118 | |
<> | 149:156823d33999 | 119 | PwmReg_pt pwmReg; |
<> | 149:156823d33999 | 120 | }; |
<> | 149:156823d33999 | 121 | |
<> | 149:156823d33999 | 122 | struct port_s { |
<> | 149:156823d33999 | 123 | GpioReg_pt GPIOMEMBASE; |
<> | 149:156823d33999 | 124 | PortName port; |
<> | 149:156823d33999 | 125 | uint32_t mask; |
<> | 149:156823d33999 | 126 | }; |
<> | 149:156823d33999 | 127 | |
<> | 149:156823d33999 | 128 | typedef enum { |
<> | 149:156823d33999 | 129 | littleEndian = 0, |
<> | 149:156823d33999 | 130 | bigEndian |
<> | 149:156823d33999 | 131 | } spi_ipc7207_endian_t, *spi_ipc7207_endian_pt; |
<> | 149:156823d33999 | 132 | |
<> | 149:156823d33999 | 133 | /** Type for the clock polarity. */ |
<> | 149:156823d33999 | 134 | typedef enum { |
<> | 149:156823d33999 | 135 | activeLow = 0, |
<> | 149:156823d33999 | 136 | activeHigh |
<> | 149:156823d33999 | 137 | } spi_clockPolarity_t, *spi_clockPolarity_pt; |
<> | 149:156823d33999 | 138 | |
<> | 149:156823d33999 | 139 | /** Type for the clock phase. */ |
<> | 149:156823d33999 | 140 | typedef enum { |
<> | 149:156823d33999 | 141 | risingEdge = 0, |
<> | 149:156823d33999 | 142 | fallingEdge |
<> | 149:156823d33999 | 143 | } spi_clockPhase_t, *spi_clockPhase_pt; |
<> | 149:156823d33999 | 144 | |
<> | 149:156823d33999 | 145 | struct spi_s { |
<> | 149:156823d33999 | 146 | SpiIpc7207Reg_pt membase; /* Register address */ |
<> | 149:156823d33999 | 147 | IRQn_Type irq; /* IRQ number of the IRQ associated to the device. */ |
<> | 149:156823d33999 | 148 | uint8_t irqEnable; /* IRQ enables for 8 IRQ sources: |
<> | 149:156823d33999 | 149 | * - bit 7 = Receive FIFO Full |
<> | 149:156823d33999 | 150 | * - bit 6 = Receive FIFO 'Half' Full (watermark level) |
<> | 149:156823d33999 | 151 | * - bit 5 = Receive FIFO Not Empty |
<> | 149:156823d33999 | 152 | * - bit 4 = Transmit FIFO Not Full |
<> | 149:156823d33999 | 153 | * - bit 3 = Transmit FIFO 'Half' Empty (watermark level) |
<> | 149:156823d33999 | 154 | * - bit 2 = Transmit FIFO Empty |
<> | 149:156823d33999 | 155 | * - bit 1 = Transfer Error |
<> | 149:156823d33999 | 156 | * - bit 0 = ssIn (conditionally inverted and synchronized to PCLK) |
<> | 149:156823d33999 | 157 | * (unused option in current implementation / irq 6 and 7 used) */ |
<> | 149:156823d33999 | 158 | uint8_t slaveSelectEnable; /* Slave Select enables (x4): |
<> | 149:156823d33999 | 159 | * - 0 (x4) = Slave select enable |
<> | 149:156823d33999 | 160 | * - 1 (x4) = Slave select disable */ |
<> | 149:156823d33999 | 161 | uint8_t slaveSelectBurst; /* Slave Select burst mode: |
<> | 149:156823d33999 | 162 | * - NO_BURST_MODE = Burst mode disable |
<> | 149:156823d33999 | 163 | * - BURST_MODE = Burst mode enable */ |
<> | 149:156823d33999 | 164 | uint8_t slaveSelectPolarity; /* Slave Select polarity (x4) for up to 4 slaves: |
<> | 149:156823d33999 | 165 | * - 0 (x4) = Slave select is active low |
<> | 149:156823d33999 | 166 | * - 1 (x4) = Slave select is active high */ |
<> | 149:156823d33999 | 167 | uint8_t txWatermark; /* Transmit FIFO Watermark: Defines level of RX Half Full Flag |
<> | 149:156823d33999 | 168 | * - Value between 1 and 15 |
<> | 149:156823d33999 | 169 | * (unused option in current implementation / not txWatermark irq used) */ |
<> | 149:156823d33999 | 170 | uint8_t rxWatermark; /* Receive FIFO Watermark: Defines level of TX Half Full Flag: |
<> | 149:156823d33999 | 171 | * - Value between 1 and 15 |
<> | 149:156823d33999 | 172 | * * (unused option in current implementation / rxWatermark fixed to 1) */ |
<> | 150:02e0a0aed4ec | 173 | spi_ipc7207_endian_t endian; /* Bits endianness: |
<> | 149:156823d33999 | 174 | * - LITTLE_ENDIAN = LSB first |
<> | 149:156823d33999 | 175 | * - BIG_ENDIAN = MSB first */ |
<> | 149:156823d33999 | 176 | uint8_t samplingEdge; /* SDI sampling edge (relative to SDO sampling edge): |
<> | 149:156823d33999 | 177 | * - 0 = opposite to SDO sampling edge |
<> | 149:156823d33999 | 178 | * - 1 = same as SDO sampling edge */ |
<> | 149:156823d33999 | 179 | uint32_t baudrate; /* The expected baud rate. */ |
<> | 149:156823d33999 | 180 | spi_clockPolarity_t clockPolarity; /* The clock polarity (active high or low). */ |
<> | 149:156823d33999 | 181 | spi_clockPhase_t clockPhase; /* The clock phase (sample on rising or falling edge). */ |
<> | 149:156823d33999 | 182 | uint8_t wordSize; /* The size word size in number of bits. */ |
<> | 149:156823d33999 | 183 | uint8_t Mode; |
<> | 149:156823d33999 | 184 | uint32_t event; |
<> | 149:156823d33999 | 185 | }; |
<> | 149:156823d33999 | 186 | |
<> | 149:156823d33999 | 187 | struct i2c_s { |
<> | 149:156823d33999 | 188 | uint32_t baudrate; /**< The expected baud rate. */ |
<> | 149:156823d33999 | 189 | uint32_t I2cStatusFromInt; |
<> | 149:156823d33999 | 190 | uint8_t ClockSource; /**< I2C clock source, 0 clkI2C pin, 1 PCLK */ |
<> | 149:156823d33999 | 191 | uint8_t irqEnable; /**< IRQs to be enabled */ |
<> | 149:156823d33999 | 192 | I2cIpc7208Reg_pt membase; /**< The memory base for the device's registers. */ |
<> | 149:156823d33999 | 193 | IRQn_Type irq; /**< The IRQ number of the IRQ associated to the device. */ |
<> | 149:156823d33999 | 194 | //queue_pt rxQueue; /**< The receive queue for the device instance. */ |
<> | 149:156823d33999 | 195 | }; |
<> | 149:156823d33999 | 196 | |
<> | 150:02e0a0aed4ec | 197 | struct trng_s { |
<> | 150:02e0a0aed4ec | 198 | RandReg_pt membase; /**< The memory base for the device's registers. */ |
<> | 150:02e0a0aed4ec | 199 | }; |
<> | 150:02e0a0aed4ec | 200 | |
<> | 149:156823d33999 | 201 | #ifdef __cplusplus |
<> | 149:156823d33999 | 202 | } |
<> | 149:156823d33999 | 203 | #endif |
<> | 149:156823d33999 | 204 | |
<> | 149:156823d33999 | 205 | #endif //OBJECTS_H_ |