mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
targets/TARGET_ONSEMI/TARGET_NCS36510/rfAna_map.h
- Committer:
- <>
- Date:
- 2016-11-24
- Revision:
- 151:5eaa88a5bcc7
- Parent:
- 150:02e0a0aed4ec
File content as of revision 151:5eaa88a5bcc7:
/** ****************************************************************************** * @file rfAna_map.h * @brief rfAna hw module register map * @internal * @author ON Semiconductor * $Rev: 2953 $ * $Date: 2014-09-15 18:13:01 +0530 (Mon, 15 Sep 2014) $ ****************************************************************************** * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). * All rights reserved. This software and/or documentation is licensed by ON Semiconductor * under limited terms and conditions. The terms and conditions pertaining to the software * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and * if applicable the software license agreement. Do not use this software and/or * documentation unless you have carefully read and you agree to the limited terms and * conditions. By using this software and/or documentation, you agree to the limited * terms and conditions. * * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * @endinternal * * @ingroup rfAna * * @details * <p> * Rf and Analog control and trimming hw module register map * </p> */ #ifndef RFANA_MAP_H_ #define RFANA_MAP_H_ /************************************************************************************************* * * * Header files * * * *************************************************************************************************/ #include "architecture.h" /************************************************************************************************** * * * Type definitions * * * **************************************************************************************************/ /** rfAna register map (control part) */ typedef struct { union { struct { __IO uint32_t FRACT_WORD:24; __IO uint32_t INT_WORD:8; } BITS; __IO uint32_t WORD; } TX_LO_CONTROL; union { struct { __IO uint32_t FRACT_WORD:24; __IO uint32_t INT_WORD:8; } BITS; __IO uint32_t WORD; } RX_LO_CONTROL; union { struct { __IO uint32_t PLL_RESET_TIME:10; __I uint32_t RESERVED:6; __IO uint32_t PLL_LOCK_TIME:10; } BITS; __IO uint32_t WORD; } PLL_TIMING; union { struct { __IO uint32_t LNA_GAIN_MODE:1; __IO uint32_t ADC_DITHER_MODE:1; } BITS; __IO uint32_t WORD; } RX_CONTROL; __IO uint32_t TX_POWER; __I uint32_t RECEIVER_GAIN; } RfAnaReg_t, *RfAnaReg_pt; /** rfAna register map (trimming part) */ typedef struct { __IO uint32_t PMU_TRIM; __IO uint32_t RESERVED; __IO uint32_t RX_CHAIN_TRIM; union { struct { __I uint32_t BIAS_VCO_TRIM:4; __I uint32_t MODULATION_TRIM:4; __IO uint32_t TX_VCO_TRIM:4; __IO uint32_t RX_VCO_TRIM:4; __I uint32_t DIV_TRIM:3; __I uint32_t REG_TRIM:2; __I uint32_t LFR_TRIM:3; __I uint32_t PAD0:4; __I uint32_t CHARGE_PUMP_RANGE:4; } BITS; __IO uint32_t WORD; } PLL_TRIM; __IO uint32_t PLL_VCO_TAP_LOCATION; union { struct { __IO uint32_t TX_TUNE:4; __IO uint32_t PA_REGULATOR_TRIM:4; __IO uint32_t REGULATOR_TRIM:2; __IO uint32_t RESERVED:2; } BITS; __IO uint32_t WORD; } TX_TRIM; __IO uint32_t RX_VCO_TRIM_LUT2; /** 0x40019098 */ __IO uint32_t RX_VCO_TRIM_LUT1; /** 0x4001909C */ __IO uint32_t TX_VCO_TRIM_LUT2; /** 0x400190A0 */ __IO uint32_t TX_VCO_TRIM_LUT1; /** 0x400190A4 */ __IO uint32_t ADC_OFFSET_BUF; /** 0x400190A8 */ } RfAnaTrimReg_t, *RfAnaTrimReg_pt; #endif /* RFANA_MAP_H_ */