Diff: targets/TARGET_Maxim/TARGET_MAX32630/mxc/spix.c

Revision:

157:ff67d9f36b67

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32630/mxc/spix.c	Thu Feb 02 17:01:33 2017 +0000
@@ -0,0 +1,297 @@
+/**
+ * @file
+ * @brief   SPI execute in place driver.
+ */
+/* *****************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-09-08 17:31:41 -0500 (Thu, 08 Sep 2016) $
+ * $Revision: 24323 $
+ *
+ **************************************************************************** */
+
+/* **** Includes **** */
+#include <stddef.h>
+#include "mxc_config.h"
+#include "mxc_assert.h"
+#include "spix.h"
+#include "spix_regs.h"
+
+/**
+ * @ingroup spix 
+ * @{
+ */ 
+
+/* **** Definitions **** */
+#define CMD_CLOCKS          8
+#define ADDR_3BYTE_CLOCKS   24
+#define ADDR_4BYTE_CLOCKS   32
+
+/***** Globals *****/
+
+/***** Functions *****/
+
+/******************************************************************************/
+#if defined ( __GNUC__ )
+#undef IAR_SPIX_PRAGMA //Make sure this is not defined for GCC
+#endif 
+
+#if IAR_SPIX_PRAGMA
+// IAR memory section declaration for the SPIX functions to be loaded in RAM.
+#pragma section=".spix_config"
+#endif
+
+#if(MXC_SPIX_REV == 0)
+
+#if defined ( __GNUC__ )
+__attribute__ ((section(".spix_config"), noinline))
+#endif /* __GNUC */
+
+#if IAR_SPIX_PRAGMA
+#pragma location=".spix_config" // IAR locate function in RAM section .spix_config
+#pragma optimize=no_inline      // IAR no inline optimization on this function
+#endif /* IAR_PRAGMA */
+
+static void SPIX_UpdateFBIgnore()
+{
+    // Update the feedback ignore clocks
+    uint8_t clocks = 0;
+    uint8_t no_cmd_clocks = 0;
+
+    // Adjust the clocks for the command
+    if((MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_CMD_WIDTH) ==
+        MXC_S_SPIX_FETCH_CTRL_CMD_WIDTH_QUAD_IO) {
+
+        clocks += CMD_CLOCKS/4;
+    } else if((MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_CMD_WIDTH) ==
+        MXC_S_SPIX_FETCH_CTRL_CMD_WIDTH_DUAL_IO) {
+
+        clocks += CMD_CLOCKS/2;
+    } else {
+
+        clocks += CMD_CLOCKS;
+    }
+
+    // Adjust the clocks for the address
+    if((MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_ADDR_WIDTH) ==
+        MXC_S_SPIX_FETCH_CTRL_ADDR_WIDTH_QUAD_IO) {
+
+        if(MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_FOUR_BYTE_ADDR) {
+            clocks += ADDR_4BYTE_CLOCKS/4;
+            no_cmd_clocks += ADDR_4BYTE_CLOCKS/4;
+        } else {
+            clocks += ADDR_3BYTE_CLOCKS/4;
+            no_cmd_clocks += ADDR_3BYTE_CLOCKS/4;
+        }
+
+    } else if((MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_ADDR_WIDTH) ==
+        MXC_S_SPIX_FETCH_CTRL_ADDR_WIDTH_DUAL_IO) {
+
+        if(MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_FOUR_BYTE_ADDR) {
+            clocks += ADDR_4BYTE_CLOCKS/2;
+            no_cmd_clocks += ADDR_4BYTE_CLOCKS/2;
+        } else {
+            clocks += ADDR_3BYTE_CLOCKS/2;
+            no_cmd_clocks += ADDR_3BYTE_CLOCKS/2;
+        }
+    } else {
+
+        if(MXC_SPIX->fetch_ctrl & MXC_F_SPIX_FETCH_CTRL_FOUR_BYTE_ADDR) {
+            clocks += ADDR_4BYTE_CLOCKS;
+            no_cmd_clocks += ADDR_4BYTE_CLOCKS;
+        } else {
+            clocks += ADDR_3BYTE_CLOCKS;
+            no_cmd_clocks += ADDR_3BYTE_CLOCKS;
+        }
+    }
+
+    // Adjust for the mode clocks
+    clocks += ((MXC_SPIX->mode_ctrl & MXC_F_SPIX_MODE_CTRL_MODE_CLOCKS) >>
+        MXC_F_SPIX_MODE_CTRL_MODE_CLOCKS_POS);
+
+    // Set the FB Ignore clocks
+    MXC_SPIX->sck_fb_ctrl = ((MXC_SPIX->sck_fb_ctrl & ~MXC_F_SPIX_SCK_FB_CTRL_IGNORE_CLKS) |
+        (clocks << MXC_F_SPIX_SCK_FB_CTRL_IGNORE_CLKS_POS));
+
+    MXC_SPIX->sck_fb_ctrl = ((MXC_SPIX->sck_fb_ctrl & ~MXC_F_SPIX_SCK_FB_CTRL_IGNORE_CLKS_NO_CMD) |
+        (no_cmd_clocks << MXC_F_SPIX_SCK_FB_CTRL_IGNORE_CLKS_NO_CMD_POS));
+}
+#endif /* MXC_SPIX_REV==0 */
+
+/******************************************************************************/
+#if defined ( __GNUC__ )
+__attribute__ ((section(".spix_config"), noinline))
+#endif /* __GNUC */
+
+#if IAR_SPIX_PRAGMA
+#pragma location=".spix_config" // IAR locate function in RAM section .spix_config
+#pragma optimize=no_inline      // IAR no inline optimization on this function
+#endif /* IAR_SPIX_PRAGMA */
+int SPIX_ConfigClock(const sys_cfg_spix_t *sys_cfg, uint32_t baud, uint8_t sample)
+{
+    int err;
+    uint32_t spix_clk, clocks;
+
+    // Check the input parameters
+    if(sys_cfg == NULL) {
+        return E_NULL_PTR;
+    }
+
+    // Set system level configurations
+    if ((err = SYS_SPIX_Init(sys_cfg, baud)) != E_NO_ERROR) {
+        return err;
+    }
+
+    // Configure the mode and baud
+    spix_clk = SYS_SPIX_GetFreq();
+    if(spix_clk <= 0) {
+        return E_UNINITIALIZED;
+    }
+
+    // Make sure that we can generate this frequency
+    clocks = (spix_clk / (2*baud));
+    if((clocks <= 0) || (clocks >= 0x10)) {
+        return E_BAD_PARAM;
+    }
+
+    // Set the baud
+    MXC_SPIX->master_cfg = ((MXC_SPIX->master_cfg &
+        ~(MXC_F_SPIX_MASTER_CFG_SCK_HI_CLK | MXC_F_SPIX_MASTER_CFG_SCK_LO_CLK)) |
+        (clocks << MXC_F_SPIX_MASTER_CFG_SCK_HI_CLK_POS) |
+        (clocks << MXC_F_SPIX_MASTER_CFG_SCK_LO_CLK_POS));
+
+    if(sample != 0) {
+        // Use sample mode
+        MXC_SPIX->master_cfg = ((MXC_SPIX->master_cfg & ~MXC_F_SPIX_MASTER_CFG_SDIO_SAMPLE_POINT) |
+            (sample << MXC_F_SPIX_MASTER_CFG_SDIO_SAMPLE_POINT_POS));
+
+        MXC_SPIX->sck_fb_ctrl &= ~(MXC_F_SPIX_SCK_FB_CTRL_ENABLE_SCK_FB_MODE |
+            MXC_F_SPIX_SCK_FB_CTRL_INVERT_SCK_FB_CLK);
+    } else {
+        // Use Feedback mode
+        MXC_SPIX->master_cfg &= ~(MXC_F_SPIX_MASTER_CFG_SDIO_SAMPLE_POINT);
+
+        MXC_SPIX->sck_fb_ctrl |= (MXC_F_SPIX_SCK_FB_CTRL_ENABLE_SCK_FB_MODE |
+            MXC_F_SPIX_SCK_FB_CTRL_INVERT_SCK_FB_CLK);
+
+
+#if(MXC_SPIX_REV == 0)
+        SPIX_UpdateFBIgnore();
+#endif
+    }
+
+    return E_NO_ERROR;
+}
+
+/******************************************************************************/
+#if defined ( __GNUC__ )
+__attribute__ ((section(".spix_config"), noinline))
+#endif /* __GNUC */
+
+#if IAR_SPIX_PRAGMA
+#pragma location=".spix_config" // IAR locate function in RAM section .spix_config
+#pragma optimize=no_inline      // IAR no inline optimization on this function
+#endif /* IAR_SPIX_PRAGMA */
+
+void SPIX_ConfigSlave(uint8_t ssel, uint8_t pol, uint8_t act_delay, uint8_t inact_delay)
+{
+
+    // Set the slave select
+    MXC_SPIX->master_cfg = ((MXC_SPIX->master_cfg & ~MXC_F_SPIX_MASTER_CFG_SLAVE_SEL) |
+        (ssel << MXC_F_SPIX_MASTER_CFG_SLAVE_SEL_POS));
+
+    if(pol != 0) {
+        // Active high
+        MXC_SPIX->master_cfg &= ~(MXC_F_SPIX_MASTER_CFG_SS_ACT_LO);
+    } else {
+        // Active low
+        MXC_SPIX->master_cfg |= MXC_F_SPIX_MASTER_CFG_SS_ACT_LO;
+    }
+
+    // Set the delays
+    MXC_SPIX->master_cfg = ((MXC_SPIX->master_cfg & ~(MXC_F_SPIX_MASTER_CFG_ACT_DELAY |
+        MXC_F_SPIX_MASTER_CFG_INACT_DELAY)) |
+        (act_delay << MXC_F_SPIX_MASTER_CFG_ACT_DELAY_POS) |
+        (inact_delay << MXC_F_SPIX_MASTER_CFG_INACT_DELAY_POS));
+}
+
+/******************************************************************************/
+#if defined ( __GNUC__ )
+__attribute__ ((section(".spix_config"), noinline))
+#endif /* __GNUC */
+
+#if IAR_SPIX_PRAGMA
+#pragma location=".spix_config" // IAR locate function in RAM section .spix_config
+#pragma optimize=no_inline      // IAR no inline optimization on this function
+#endif /* IAR_SPIX_PRAGMA */
+
+void SPIX_ConfigFetch(const spix_fetch_t *fetch)
+{
+    // Configure how the SPIX fetches data
+    MXC_SPIX->fetch_ctrl = (((fetch->cmd << MXC_F_SPIX_FETCH_CTRL_CMD_VALUE_POS) & MXC_F_SPIX_FETCH_CTRL_CMD_VALUE) |
+        ((fetch->cmd_width << MXC_F_SPIX_FETCH_CTRL_CMD_WIDTH_POS) & MXC_F_SPIX_FETCH_CTRL_CMD_WIDTH) |
+        ((fetch->addr_width << MXC_F_SPIX_FETCH_CTRL_ADDR_WIDTH_POS) & MXC_F_SPIX_FETCH_CTRL_ADDR_WIDTH) |
+        ((fetch->data_width << MXC_F_SPIX_FETCH_CTRL_DATA_WIDTH_POS) & MXC_F_SPIX_FETCH_CTRL_DATA_WIDTH) |
+        ((fetch->addr_size << MXC_F_SPIX_FETCH_CTRL_FOUR_BYTE_ADDR_POS) & MXC_F_SPIX_FETCH_CTRL_FOUR_BYTE_ADDR));
+
+    // Set the command mode and clocks
+    MXC_SPIX->mode_ctrl = (((fetch->mode_clocks << MXC_F_SPIX_MODE_CTRL_MODE_CLOCKS_POS) & MXC_F_SPIX_MODE_CTRL_MODE_CLOCKS) |
+        (!!fetch->no_cmd_mode << MXC_F_SPIX_MODE_CTRL_NO_CMD_MODE_POS));
+
+    MXC_SPIX->mode_data = (((fetch->mode_data << MXC_F_SPIX_MODE_DATA_MODE_DATA_BITS_POS) & MXC_F_SPIX_MODE_DATA_MODE_DATA_BITS) |
+        MXC_F_SPIX_MODE_DATA_MODE_DATA_OE);
+
+#if(MXC_SPIX_REV == 0)
+    SPIX_UpdateFBIgnore();
+#endif
+}
+
+/******************************************************************************/
+#if defined ( __GNUC__ )
+__attribute__ ((section(".spix_config"), noinline))
+#endif /* __GNUC */
+
+#if IAR_SPIX_PRAGMA
+#pragma location=".spix_config" // IAR locate function in RAM section .spix_config
+#pragma optimize=no_inline      // IAR no inline optimization on this function
+#endif /* IAR_SPIX_PRAGMA */
+
+int SPIX_Shutdown(mxc_spix_regs_t *spix)
+{
+    int err;
+
+    // Clear system level configurations
+    if ((err = SYS_SPIX_Shutdown()) != E_NO_ERROR) {
+        return err;
+    }
+
+    return E_NO_ERROR;
+}