Umar Naeem
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
Umar Naeem
Diff: targets/hal/TARGET_NXP/TARGET_LPC2460/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_NXP/TARGET_LPC2460/PinNames.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC2460/PinNames.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,112 +1,112 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2015 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 5
-
-typedef enum {
- // LPC Pin Names
- P0_0 = LPC_GPIO0_BASE,
- P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
- P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
- P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
- P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
- P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
-
- // mbed DIP Pin Names
- p5 = P0_18,
- p6 = P0_17,
- p7 = P0_15,
- p8 = P0_16,
-
- p9 = P0_2,
- p10 = P0_3,
- p11 = P0_18,
- p12 = P0_17,
- p13 = P2_0,
- p14 = P2_1,
- p15 = P4_28,
- p16 = P4_29,
- p17 = P2_30,
- p18 = P2_31,
- p19 = P0_0,
- p20 = P0_1,
- p21 = P0_26,
- p22 = P0_12,
- p23 = P0_13,
- p24 = P1_20,
- p25 = P1_21,
- p26 = P1_23,
- p27 = P1_24,
- p28 = P0_29,
- p29 = P0_30,
- p30 = P1_2,
- p31 = P1_3,
- p32 = P1_6,
- p33 = P1_7,
- p34 = P1_11,
- p35 = P1_12,
-
- // Other mbed Pin Names
- LED1 = P1_19,
- LED2 = P2_26,
- LED3 = P2_27,
- LED4 = P2_27,
-
- USBTX = P2_8,
- USBRX = P2_9,
-
- EXT_WDT = P0_10,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullUp = 0,
- PullDown = 3,
- PullNone = 2,
- OpenDrain = 4,
- PullDefault = PullDown
-} PinMode;
-
-// version of PINCON_TypeDef using register arrays
-typedef struct {
- __IO uint32_t PINSEL[11];
- uint32_t RESERVED0[5];
- __IO uint32_t PINMODE[10];
-} PINCONARRAY_TypeDef;
-
-#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC Pin Names
+ P0_0 = LPC_GPIO0_BASE,
+ P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+ P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+ P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
+ P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
+ P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
+
+ // mbed DIP Pin Names
+ p5 = P0_18,
+ p6 = P0_17,
+ p7 = P0_15,
+ p8 = P0_16,
+
+ p9 = P0_2,
+ p10 = P0_3,
+ p11 = P0_18,
+ p12 = P0_17,
+ p13 = P2_0,
+ p14 = P2_1,
+ p15 = P4_28,
+ p16 = P4_29,
+ p17 = P2_30,
+ p18 = P2_31,
+ p19 = P0_0,
+ p20 = P0_1,
+ p21 = P0_26,
+ p22 = P0_12,
+ p23 = P0_13,
+ p24 = P1_20,
+ p25 = P1_21,
+ p26 = P1_23,
+ p27 = P1_24,
+ p28 = P0_29,
+ p29 = P0_30,
+ p30 = P1_2,
+ p31 = P1_3,
+ p32 = P1_6,
+ p33 = P1_7,
+ p34 = P1_11,
+ p35 = P1_12,
+
+ // Other mbed Pin Names
+ LED1 = P1_19,
+ LED2 = P2_26,
+ LED3 = P2_27,
+ LED4 = P2_27,
+
+ USBTX = P2_8,
+ USBRX = P2_9,
+
+ EXT_WDT = P0_10,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullUp = 0,
+ PullDown = 3,
+ PullNone = 2,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+// version of PINCON_TypeDef using register arrays
+typedef struct {
+ __IO uint32_t PINSEL[11];
+ uint32_t RESERVED0[5];
+ __IO uint32_t PINMODE[10];
+} PINCONARRAY_TypeDef;
+
+#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif