Umar Naeem
mbed library sources. Supersedes mbed-src.
Fork of
mbed-dev
by 
Umar Naeem
Diff: targets/cmsis/TARGET_WIZNET/TARGET_W7500x/W7500x.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/cmsis/TARGET_WIZNET/TARGET_W7500x/W7500x.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/TARGET_WIZNET/TARGET_W7500x/W7500x.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,1191 +1,1191 @@
-/**************************************************************************//**
- * @file W7500x.h
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
- * Device W7500x
- * @version V3.01
- * @date 06. March 2012
- *
- * @note
- * Copyright (C) 2010-2012 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#ifndef W7500x_H
-#define W7500x_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup W7500x_Definitions W7500x Definitions
- This file defines all structures and symbols for W7500x:
- - registers and bitfields
- - peripheral base address
- - peripheral ID
- - Peripheral definitions
- @{
-*/
-
-
-/******************************************************************************/
-/* Processor and Core Peripherals */
-/******************************************************************************/
-/** @addtogroup W7500x_CMSIS Device CMSIS Definitions
- Configuration of the Cortex-M0 Processor and Core Peripherals
- @{
-*/
-
-/*
- * ==========================================================================
- * ---------- Interrupt Number Definition -----------------------------------
- * ==========================================================================
- */
-
-typedef enum IRQn
-{
-/****** Cortex-M0 Processor Exceptions Numbers **************************************************/
-
-/* ToDo: use this Cortex interrupt numbers if your device is a CORTEX-M0 device */
- NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M0 Non Maskable Interrupt */
- HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
- SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
- PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
- SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
-/****** W7500x Specific Interrupt Numbers *********************************************************/
- SSP0_IRQn = 0, /*!< SSP 0 Interrupt */
- SSP1_IRQn = 1, /*!< SSP 1 Interrupt */
- UART0_IRQn = 2, /*!< UART 0 Interrupt */
- UART1_IRQn = 3, /*!< UART 1 Interrupt */
- UART2_IRQn = 4, /*!< UART 2 Interrupt */
- I2C0_IRQn = 5, /*!< I2C 0 Interrupt */
- I2C1_IRQn = 6, /*!< I2C 1 Interrupt */
- PORT0_IRQn = 7, /*!< Port 1 combined Interrupt */
- PORT1_IRQn = 8, /*!< Port 2 combined Interrupt */
- PORT2_IRQn = 9, /*!< Port 2 combined Interrupt */
- PORT3_IRQn = 10, /*!< Port 2 combined Interrupt */
- DMA_IRQn = 11, /*!< DMA combined Interrupt */
- DUALTIMER0_IRQn = 12, /*!< Dual Timer 0 Interrupt */
- DUALTIMER1_IRQn = 13, /*!< Dual Timer 1 Interrupt */
- PWM0_IRQn = 14, /*!< PWM 0 Interrupt */
- PWM1_IRQn = 15, /*!< PWM 1 Interrupt */
- PWM2_IRQn = 16, /*!< PWM 2 Interrupt */
- PWM3_IRQn = 17, /*!< PWM 3 Interrupt */
- PWM4_IRQn = 18, /*!< PWM 4 Interrupt */
- PWM5_IRQn = 19, /*!< PWM 5 Interrupt */
- PWM6_IRQn = 20, /*!< PWM 6 Interrupt */
- PWM7_IRQn = 21, /*!< PWM 7 Interrupt */
- RTC_IRQn = 22, /*!< RTC Interrupt */
- ADC_IRQn = 23, /*!< ADC Interrupt */
- WZTOE_IRQn = 24, /*!< WZTOE Interrupt */
- EXTI_IRQn = 25 /*!< EXTI Interrupt */
-} IRQn_Type;
-
-/*
- * ==========================================================================
- * ----------- Processor and Core Peripheral Section ------------------------
- * ==========================================================================
- */
-
-/* Configuration of the Cortex-M0 Processor and Core Peripherals */
-#define __CM0_REV 0x0000 /*!< Core Revision r0p0 */
-#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-
-/*@}*/ /* end of group W7500x_CMSIS */
-
-
-#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
-#include "system_W7500x.h" /* W7500x System include file */
-
-
-/** @addtogroup Exported_types
- * @{
- */
-
-typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
-typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
-
-
-
-
-/**
- * @}
- */
-
-
-
-
-/** @addtogroup Peripheral_registers_structures
- * @{
- */
-
-/**
- * @brief Clock Reset Generator
- */
-typedef struct
-{
- __IO uint32_t OSC_PDR; /*!< Oscillator power down register, Address offset : 0x00 */
- uint32_t RESERVED0[3];
- __IO uint32_t PLL_PDR; /*!< PLL power down register, Address offset : 0x10 */
- __IO uint32_t PLL_FCR; /*!< PLL frequency calculating register, Address offset : 0x14 */
- __IO uint32_t PLL_OER; /*!< PLL output enable register, Address offset : 0x18 */
- __IO uint32_t PLL_BPR; /*!< PLL bypass register, Address offset : 0x1c */
- __IO uint32_t PLL_IFSR; /*!< PLL input frequency select register, Address offset : 0x20 */
- uint32_t RESERVED1[3];
- __IO uint32_t FCLK_SSR; /*!< FCLK source select register, Address offset : 0x30 */
- __IO uint32_t FCLK_PVSR; /*!< FCLK prescale value select register, Address offset : 0x34 */
- uint32_t RESERVED2[2];
- __IO uint32_t SSPCLK_SSR; /*!< SSPCLK source select register, Address offset : 0x40 */
- __IO uint32_t SSPCLK_PVSR; /*!< SSPCLK prescale value select register, Address offset : 0x44 */
- uint32_t RESERVED3[6];
- __IO uint32_t ADCCLK_SSR; /*!< ADCCLK source select register, Address offset : 0x60 */
- __IO uint32_t ADCCLK_PVSR; /*!< ADCCLK prescale value select register, Address offset : 0x64 */
- uint32_t RESERVED4[2];
- __IO uint32_t TIMER0CLK_SSR; /*!< TIMER0CLK source select register, Address offset : 0x70 */
- __IO uint32_t TIMER0CLK_PVSR; /*!< TIMER0CLK prescale value select register, Address offset : 0x74 */
- uint32_t RESERVED5[2];
- __IO uint32_t TIMER1CLK_SSR; /*!< TIMER1CLK source select register, Address offset : 0x80 */
- __IO uint32_t TIMER1CLK_PVSR; /*!< TIMER1CLK prescale value select register, Address offset : 0x84 */
- uint32_t RESERVED6[10];
- __IO uint32_t PWM0CLK_SSR; /*!< PWM0CLK source select register, Address offset : 0xb0 */
- __IO uint32_t PWM0CLK_PVSR; /*!< PWM0CLK prescale value select register, Address offset : 0xb4 */
- uint32_t RESERVED7[2];
- __IO uint32_t PWM1CLK_SSR; /*!< PWM1CLK source select register, Address offset : 0xc0 */
- __IO uint32_t PWM1CLK_PVSR; /*!< PWM1CLK prescale value select register, Address offset : 0xc4 */
- uint32_t RESERVED8[2];
- __IO uint32_t PWM2CLK_SSR; /*!< PWM2CLK source select register, Address offset : 0xd0 */
- __IO uint32_t PWM2CLK_PVSR; /*!< PWM2CLK prescale value select register, Address offset : 0xd4 */
- uint32_t RESERVED9[2];
- __IO uint32_t PWM3CLK_SSR; /*!< PWM3CLK source select register, Address offset : 0xe0 */
- __IO uint32_t PWM3CLK_PVSR; /*!< PWM3CLK prescale value select register, Address offset : 0xe4 */
- uint32_t RESERVED10[2];
- __IO uint32_t PWM4CLK_SSR; /*!< PWM4CLK source select register, Address offset : 0xf0 */
- __IO uint32_t PWM4CLK_PVSR; /*!< PWM4CLK prescale value select register, Address offset : 0xf4 */
- uint32_t RESERVED11[2];
- __IO uint32_t PWM5CLK_SSR; /*!< PWM5CLK source select register, Address offset : 0x100 */
- __IO uint32_t PWM5LK_PVSR; /*!< PWM5CLK prescale value select register, Address offset : 0x104 */
- uint32_t RESERVED12[2];
- __IO uint32_t PWM6CLK_SSR; /*!< PWM6CLK source select register, Address offset : 0x110 */
- __IO uint32_t PWM6CLK_PVSR; /*!< PWM6CLK prescale value select register, Address offset : 0x114 */
- uint32_t RESERVED13[2];
- __IO uint32_t PWM7CLK_SSR; /*!< PWM7CLK source select register, Address offset : 0x120 */
- __IO uint32_t PWM7CLK_PVSR; /*!< PWM7CLK prescale value select register, Address offset : 0x124 */
- uint32_t RESERVED14[2];
- __IO uint32_t RTC_HS_SSR; /*!< RTC High Speed source select register, Address offset : 0x130 */
- __IO uint32_t RTC_HS_PVSR; /*!< RTC High Speed prescale value select register, Address offset : 0x134 */
- uint32_t RESERVED15;
- __IO uint32_t RTC_SSR; /*!< RTC source select register, Address offset : 0x13c */
-
- __IO uint32_t WDOGCLK_HS_SSR; /*!< WDOGCLK High Speed source select register, Address offset : 0x140 */
- __IO uint32_t WDOGCLK_HS_PVSR; /*!< WDOGCLK High Speed prescale value select register, Address offset : 0x144 */
- uint32_t RESERVED16;
- __IO uint32_t WDOGCLK_SSR; /*!< WDOGCLK source select register, Address offset : 0x14c */
-
- __IO uint32_t UARTCLK_SSR; /*!< UARTCLK source select register, Address offset : 0x150 */
- __IO uint32_t UARTCLK_PVSR; /*!< UARTCLK prescale value select register, Address offset : 0x154 */
- uint32_t RESERVED17[2];
- __IO uint32_t MIICLK_ECR; /*!< MII clock enable control register, Address offset : 0x160 */
- uint32_t RESERVED18[3];
- __IO uint32_t MONCLK_SSR; /*!< Monitoring clock source select I found Treasure was IoT Base Station in March.register, Address offset : 0x170 */
-}CRG_TypeDef;
-
-
-/**
- * @brief UART
- */
-typedef struct
-{
- __IO uint32_t DR; /*!< Data, Address offset : 0x00 */
- union {
- __I uint32_t RSR; /*!< Receive Status, Address offset : 0x04 */
- __O uint32_t ECR; /*!< Error Clear, Address offset : 0x04 */
- } STATUS;
- uint32_t RESERVED0[4];
- __IO uint32_t FR; /*!< Flags, Address offset : 0x18 */
- uint32_t RESERVED1;
- __IO uint32_t ILPR; /*!< IrDA Low-power Counter, Address offset : 0x20 */
- __IO uint32_t IBRD; /*!< Integer Baud Rate, Address offset : 0x24 */
- __IO uint32_t FBRD; /*!< Fractional Baud Rate, Address offset : 0x28 */
- __IO uint32_t LCR_H; /*!< Line Control, Address offset : 0x2C */
- __IO uint32_t CR; /*!< Control, Address offset : 0x30 */
- __IO uint32_t IFLS; /*!< Interrupt FIFO Level Select, Address offset : 0x34 */
- __IO uint32_t IMSC; /*!< Interrupt Mask Set / Clear, Address offset : 0x38 */
- __IO uint32_t RIS; /*!< Raw Interrupt Status , Address offset : 0x3C */
- __IO uint32_t MIS; /*!< Masked Interrupt Status , Address offset : 0x40 */
- __O uint32_t ICR; /*!< Interrupt Clear, Address offset : 0x44 */
- __IO uint32_t DMACR; /*!< DMA Control, Address offset : 0x48 */
-} UART_TypeDef;
-
-
-/**
- * @brief Simple UART
- */
-typedef struct
-{
- __IO uint32_t DATA; /*!< Offset: 0x000 Data Register (R/W) */
- __IO uint32_t STATE; /*!< Offset: 0x004 Status Register (R/W) */
- __IO uint32_t CTRL; /*!< Offset: 0x008 Control Register (R/W) */
- union {
- __I uint32_t STATUS; /*!< Offset: 0x00C Interrupt Status Register (R/ ) */
- __O uint32_t CLEAR; /*!< Offset: 0x00C Interrupt Clear Register ( /W) */
- }INT;
- __IO uint32_t BAUDDIV; /*!< Offset: 0x010 Baudrate Divider Register (R/W) */
-
-} S_UART_TypeDef;
-
-/**
- * @brief Analog Digital Converter
- */
-
-typedef struct
-{
- __IO uint32_t ADC_CTR; /* ADC control register, Address offset : 0x000 */
- __IO uint32_t ADC_CHSEL; /* ADC channel select register, Address offset : 0x004 */
- __IO uint32_t ADC_START; /* ADC start register, Address offset : 0x008 */
- __I uint32_t ADC_DATA; /* ADC conversion data register, Address offset : 0x00c */
- __IO uint32_t ADC_INT; /* ADC interrupt register, Address offset : 0x010 */
- uint32_t RESERVED0[2];
- __IO uint32_t ADC_INTCLR; /* ADC interrupt clear register, Address offset : 0x01c */
-}ADC_TypeDef;
-
-/**
- * @brief dualtimer
- */
-typedef struct
-{
- __IO uint32_t TimerLoad; // <h> Timer Load </h>
- __I uint32_t TimerValue; // <h> Timer Counter Current Value <r></h>
- __IO uint32_t TimerControl; // <h> Timer Control
- // <o.7> TimerEn: Timer Enable
- // <o.6> TimerMode: Timer Mode
- // <0=> Freerunning-mode
- // <1=> Periodic mode
- // <o.5> IntEnable: Interrupt Enable
- // <o.2..3> TimerPre: Timer Prescale
- // <0=> / 1
- // <1=> / 16
- // <2=> / 256
- // <3=> Undefined!
- // <o.1> TimerSize: Timer Size
- // <0=> 16-bit counter
- // <1=> 32-bit counter
- // <o.0> OneShot: One-shoot mode
- // <0=> Wrapping mode
- // <1=> One-shot mode
- // </h>
- __O uint32_t TimerIntClr; // <h> Timer Interrupt Clear <w></h>
- __I uint32_t TimerRIS; // <h> Timer Raw Interrupt Status <r></h>
- __I uint32_t TimerMIS; // <h> Timer Masked Interrupt Status <r></h>
- __IO uint32_t TimerBGLoad; // <h> Background Load Register </h>
-} DUALTIMER_TypeDef;
-
-/**
- * @brief GPIO
- */
-typedef struct
-{
- __IO uint32_t DATA; /* DATA Register (R/W), offset : 0x000 */
- __IO uint32_t DATAOUT; /* Data Output Latch Register (R/W), offset : 0x004 */
- uint32_t RESERVED0[2];
- __IO uint32_t OUTENSET; /* Output Enable Set Register (R/W) offset : 0x010 */
- __IO uint32_t OUTENCLR; /* Output Enable Clear Register (R/W) offset : 0x014 */
- __IO uint32_t RESERVED1; /* Alternate Function Set Register (R/W) offset : 0x018 */
- __IO uint32_t RESERVED2; /* Alternate Function Clear Register (R/W) offset : 0x01C */
- __IO uint32_t INTENSET; /* Interrupt Enable Set Register (R/W) offset : 0x020 */
- __IO uint32_t INTENCLR; /* Interrupt Enable Clear Register (R/W) offset : 0x024 */
- __IO uint32_t INTTYPESET; /* Interrupt Type Set Register (R/W) offset : 0x028 */
- __IO uint32_t INTTYPECLR; /* Interrupt Type Clear Register (R/W) offset : 0x02C */
- __IO uint32_t INTPOLSET; /* Interrupt Polarity Set Register (R/W) offset : 0x030 */
- __IO uint32_t INTPOLCLR; /* Interrupt Polarity Clear Register (R/W) offset : 0x034 */
- union {
- __I uint32_t INTSTATUS; /* Interrupt Status Register (R/ ) offset : 0x038 */
- __O uint32_t INTCLEAR; /* Interrupt Clear Register ( /W) offset : 0x038 */
- }Interrupt;
- uint32_t RESERVED3[241];
- __IO uint32_t LB_MASKED[256]; /* Lower byte Masked Access Register (R/W) offset : 0x400 - 0x7FC */
- __IO uint32_t UB_MASKED[256]; /* Upper byte Masked Access Register (R/W) offset : 0x800 - 0xBFC */
-} GPIO_TypeDef;
-
-typedef struct
-{
- __IO uint32_t Port[16]; /* Port_00, offset : 0x00 */
- /* Port_01, offset : 0x04 */
- /* Port_02, offset : 0x08 */
- /* Port_03, offset : 0x0C */
- /* Port_04, offset : 0x10 */
- /* Port_05, offset : 0x14 */
- /* Port_06, offset : 0x18 */
- /* Port_07, offset : 0x1C */
- /* Port_08, offset : 0x20 */
- /* Port_09, offset : 0x24 */
- /* Port_10, offset : 0x28 */
- /* Port_11, offset : 0x2C */
- /* Port_12, offset : 0x30 */
- /* Port_13, offset : 0x34 */
- /* Port_14, offset : 0x38 */
- /* Port_15, offset : 0x3C */
-} P_Port_Def;
-
-typedef struct
-{
- __IO uint32_t Port[5]; /* Port_00, offset : 0x00 */
- /* Port_01, offset : 0x04 */
- /* Port_02, offset : 0x08 */
- /* Port_03, offset : 0x0C */
- /* Port_04, offset : 0x10 */
-} P_Port_D_Def;
-
-/**
- * @brief I2C Register structure definition
- */
-typedef struct
-{
- __IO uint32_t PRER; //0x00
- __IO uint32_t CTR; //0x04
- __IO uint32_t CMDR; //0x08
- __I uint32_t SR; //0x0C
- __IO uint32_t TSR; //0x10
- __IO uint32_t SADDR; //0x14
- __IO uint32_t TXR; //0x18
- __I uint32_t RXR; //0x1C
- __I uint32_t ISR; //0x20
- __IO uint32_t ISCR; //0x24
- __IO uint32_t ISMR; //0x28
-}I2C_TypeDef;
-
-/**
- * @brief PWM Register structure definition
- */
-typedef struct
-{
- __IO uint32_t IER; //Interrupt enable register
- // <7> IE7 : Channel 7 interrupt enable <R/W>
- // <6> IE6 : Channel 6 interrupt enable <R/W>
- // <5> IE5 : Channel 5 interrupt enable <R/W>
- // <4> IE4 : Channel 4 interrupt enable <R/W>
- // <3> IE3 : Channel 3 interrupt enable <R/W>
- // <2> IE2 : Channel 2 interrupt enable <R/W>
- // <1> IE1 : Channel 1 interrupt enable <R/W>
- // <0> IE0 : Channel 0 interrupt enable <R/W>
-
- __IO uint32_t SSR; //Start Stop register
- // <7> SS7 : Channel 7 TC start or stop <R/W>
- // <6> SS6 : Channel 6 TC start or stop <R/W>
- // <5> SS5 : Channel 5 TC start or stop <R/W>
- // <4> SS4 : Channel 4 TC start or stop <R/W>
- // <3> SS3 : Channel 3 TC start or stop <R/W>
- // <2> SS2 : Channel 2 TC start or stop <R/W>
- // <1> SS1 : Channel 1 TC start or stop <R/W>
- // <0> SS0 : Channel 0 TC start or stop <R/W>
-
- __IO uint32_t PSR; //Pause register
- // <7> PS7 : Channel 7 TC pasue <R/W>
- // <6> PS6 : Channel 6 TC pasue <R/W>
- // <5> PS5 : Channel 5 TC pasue <R/W>
- // <4> PS4 : Channel 4 TC pasue <R/W>
- // <3> PS3 : Channel 3 TC pasue <R/W>
- // <2> PS2 : Channel 2 TC pasue <R/W>
- // <1> PS1 : Channel 1 TC pasue <R/W>
- // <0> PS0 : Channel 0 TC pasue <R/W>
-} PWM_TypeDef;
-
-typedef struct
-{
- __I uint32_t IR; //Interrupt register
- // <2> CI : Capture interrupt <R>
- // <1> OI : Overflow interrupt <R>
- // <0> MI : Match interrupt <R>
-
- __IO uint32_t IER; //Interrupt enable register
- // <2> CIE : Capture interrupt enable <R/W>
- // <1> OIE : Overflow interrupt enable <R/W>
- // <0> MIE : Match interrupt enable <R/W>
-
- __O uint32_t ICR; //Interrupt clear register
- // <2> CIC : Capture interrupt clear <W>
- // <1> OIC : Overflow interrupt clear <W>
- // <0> MIC : Match interrupt clear <W>
-
- __I uint32_t TCR; //Timer/Counter register
- // <0..31> TCR : Timer/Counter register <R>
-
- __I uint32_t PCR; //Prescale counter register
- // <0..5> PCR : Prescale Counter register <R>
-
- __IO uint32_t PR; //Prescale register
- // <0..5> PR : prescale register <R/W>
-
- __IO uint32_t MR; //Match register
- // <0..31> MR : Match register <R/W>
-
- __IO uint32_t LR; //Limit register
- // <0..31> LR : Limit register <R/W>
- __IO uint32_t UDMR; //Up-Down mode register
- // <0> UDM : Up-down mode <R/W>
-
- __IO uint32_t TCMR; //Timer/Counter mode register
- // <0> TCM : Timer/Counter mode <R/W>
-
- __IO uint32_t PEEER; //PWM output enable and external input enable register
- // <0..1> PEEE : PWM output enable and external input enable <R/W>
-
- __IO uint32_t CMR; //Capture mode register
- // <0> CM : Capture mode <R/W>
-
- __IO uint32_t CR; //Capture register
- // <0..31> CR : Capture register <R>
-
- __IO uint32_t PDMR; //Periodic mode register
- // <0> PDM : Periodic mode <R/W>
-
- __IO uint32_t DZER; //Dead-zone enable register
- // <0> DZE : Dead-zone enable <R/W>
-
- __IO uint32_t DZCR; //Dead-zone counter register
- // <0..9> DZC : Dead-zone counter <R/W>
-} PWM_CHn_TypeDef;
-
-typedef struct
-{
- __IO uint32_t PWM_CHn_PR; //Prescale register
- // <0..5> PR : prescale register <R/W>
- __IO uint32_t PWM_CHn_MR; //Match register
- // <0..31> MR : Match register <R/W>
- __IO uint32_t PWM_CHn_LR; //Limit register
- // <0..31> LR : Limit register <R/W>
- __IO uint32_t PWM_CHn_UDMR; //Up-Down mode register
- // <0> UDM : Up-down mode <R/W>
- __IO uint32_t PWM_CHn_PDMR; //Periodic mode register
- // <0> PDM : Periodic mode <R/W>
-}PWM_TimerModeInitTypeDef;
-
-typedef struct
-{
- __IO uint32_t PWM_CHn_PR; //Prescale register
- // <0..5> PR : prescale register <R/W>
- __IO uint32_t PWM_CHn_MR; //Match register
- // <0..31> MR : Match register <R/W>
- __IO uint32_t PWM_CHn_LR; //Limit register
- // <0..31> LR : Limit register <R/W>
- __IO uint32_t PWM_CHn_UDMR; //Up-Down mode register
- // <0> UDM : Up-down mode <R/W>
- __IO uint32_t PWM_CHn_PDMR; //Periodic mode register
- // <0> PDM : Peiodic mode <R/W>
- __IO uint32_t PWM_CHn_CMR; //Capture mode register
- // <0> CM : Capture mode <R/W>
-}PWM_CaptureModeInitTypeDef;
-
-typedef struct
-{
- __IO uint32_t PWM_CHn_MR;
- __IO uint32_t PWM_CHn_LR;
- __IO uint32_t PWM_CHn_UDMR;
- __IO uint32_t PWM_CHn_PDMR;
- __IO uint32_t PWM_CHn_TCMR;
-}PWM_CounterModeInitTypeDef;
-
-
-/**
- * @brief Random Number generator
- */
-typedef struct
-{
- __IO uint32_t RNG_RUN; /* RNG run register, Address offset : 0x000 */
- __IO uint32_t RNG_SEED; /* RNG seed value register, Address offset : 0x004 */
- __IO uint32_t RNG_CLKSEL; /* RNG Clock source select register, Address offset : 0x008 */
- __IO uint32_t RNG_MODE; /* RNG MODE select register, Address offset : 0x00c */
- __I uint32_t RNG_RN; /* RNG random number value register, Address offset : 0x010 */
- __IO uint32_t RNG_POLY; /* RNG polynomial register, Address offset : 0x014 */
-}RNG_TypeDef;
-
-/**
- * @brief Serial Peripheral Interface
- */
-typedef struct
-{
- __IO uint32_t CR0;
- __IO uint32_t CR1;
- __IO uint32_t DR;
- __IO uint32_t SR;
- __IO uint32_t CPSR;
- __IO uint32_t IMSC;
- __IO uint32_t RIS;
- __IO uint32_t MIS;
- __IO uint32_t ICR;
- __IO uint32_t DMACR;
-} SSP_TypeDef;
-
-typedef struct
-{
- __IO uint32_t WatchdogLoad; // <h> Watchdog Load Register </h>
- __I uint32_t WatchdogValue; // <h> Watchdog Value Register </h>
- __IO uint32_t WatchdogControl; // <h> Watchdog Control Register
- // <o.1> RESEN: Reset enable
- // <o.0> INTEN: Interrupt enable
- // </h>
- __O uint32_t WatchdogIntClr; // <h> Watchdog Clear Interrupt Register </h>
- __I uint32_t WatchdogRIS; // <h> Watchdog Raw Interrupt Status Register </h>
- __I uint32_t WatchdogMIS; // <h> Watchdog Interrupt Status Register </h>
- uint32_t RESERVED[762];
- __IO uint32_t WatchdogLock; // <h> Watchdog Lock Register </h>
-}WATCHDOG_TypeDef;
-
-/** @addtogroup Peripheral_memory_map
- * @{
- */
-
-/* Peripheral and SRAM base address */
-#define W7500x_FLASH_BASE (0x00000000UL) /*!< (FLASH ) Base Address */
-#define W7500x_SRAM_BASE (0x20000000UL) /*!< (SRAM ) Base Address */
-#define W7500x_PERIPH_BASE (0x40000000UL) /*!< (Peripheral) Base Address */
-
-#define W7500x_RAM_BASE (0x20000000UL)
-#define W7500x_APB1_BASE (0x40000000UL)
-#define W7500x_APB2_BASE (0x41000000UL)
-#define W7500x_AHB_BASE (0x42000000UL)
-
-#define W7500x_UART0_BASE (W7500x_APB1_BASE + 0x0000C000UL)
-#define W7500x_UART1_BASE (W7500x_APB1_BASE + 0x0000D000UL)
-#define W7500x_UART2_BASE (W7500x_APB1_BASE + 0x00006000UL)
-
-#define W7500x_CRG_BASE (W7500x_APB2_BASE + 0x00001000UL)
-#define W7500x_ADC_BASE (W7500x_APB2_BASE + 0x00000000UL)
-
-#define W7500x_INFO_BGT (0x0003FDB8)
-#define W7500x_INFO_OSC (0x0003FDBC)
-
-#define W7500x_TRIM_BGT (0x41001210)
-#define W7500x_TRIM_OSC (0x41001004)
-
-#define W7500x_DUALTIMER0_BASE (W7500x_APB1_BASE + 0x00001000ul)
-#define W7500x_DUALTIMER1_BASE (W7500x_APB1_BASE + 0x00002000ul)
-
-#define EXTI_Px_BASE (W7500x_APB2_BASE + 0x00002200UL)
-
-#define GPIOA_BASE (W7500x_AHB_BASE + 0x00000000UL) // W7500x_AHB_BASE : 0x42000000UL
-#define GPIOB_BASE (W7500x_AHB_BASE + 0x01000000UL)
-#define GPIOC_BASE (W7500x_AHB_BASE + 0x02000000UL)
-#define GPIOD_BASE (W7500x_AHB_BASE + 0x03000000UL)
-
-#define P_AFSR_BASE (W7500x_APB2_BASE + 0x00002000UL)
-
-#define P_PCR_BASE (W7500x_APB2_BASE + 0x00003000UL)
-
-#define I2C0_BASE (W7500x_APB1_BASE + 0x8000)
-#define I2C1_BASE (W7500x_APB1_BASE + 0x9000)
-
-#define W7500x_PWM_BASE (W7500x_APB1_BASE + 0x00005000UL)
-
-#define W7500x_RNG_BASE (W7500x_APB1_BASE + 0x00007000UL)
-
-#define SSP0_BASE (0x4000A000)
-#define SSP1_BASE (0x4000B000)
-
-#define W7500x_WATCHDOG_BASE (W7500x_APB1_BASE + 0x0000UL)
-
-/**
- * @}
- */
-
-
-/** @addtogroup Peripheral_declaration
- * @{
- */
-#define CRG ((CRG_TypeDef *) W7500x_CRG_BASE)
-
-#define UART0 ((UART_TypeDef *) W7500x_UART0_BASE)
-#define UART1 ((UART_TypeDef *) W7500x_UART1_BASE)
-#define UART2 ((S_UART_TypeDef *) W7500x_UART2_BASE)
-
-#define ADC ((ADC_TypeDef *) W7500x_ADC_BASE)
-
-#define DUALTIMER0_0 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER0_BASE) )
-#define DUALTIMER0_1 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER0_BASE + 0x20ul))
-#define DUALTIMER1_0 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER1_BASE) )
-#define DUALTIMER1_1 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER1_BASE + 0x20ul))
-
-#define EXTI_PA ((P_Port_Def *) (EXTI_Px_BASE + 0x00000000UL)) /* PA_XX External interrupt Enable Register */
-#define EXTI_PB ((P_Port_Def *) (EXTI_Px_BASE + 0x00000040UL)) /* PB_XX External interrupt Enable Register */
-#define EXTI_PC ((P_Port_Def *) (EXTI_Px_BASE + 0x00000080UL)) /* PC_XX External interrupt Enable Register */
-#define EXTI_PD ((P_Port_D_Def *) (EXTI_Px_BASE + 0x000000C0UL)) /* PD_XX External interrupt Enable Register */
-
-#define GPIOA ((GPIO_TypeDef *) (GPIOA_BASE) )
-#define GPIOB ((GPIO_TypeDef *) (GPIOB_BASE) )
-#define GPIOC ((GPIO_TypeDef *) (GPIOC_BASE) )
-#define GPIOD ((GPIO_TypeDef *) (GPIOD_BASE) )
-
-#define PA_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000000UL)) /* PA_XX Pad Alternate Function Select Register */
-#define PB_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000040UL)) /* PB_XX Pad Alternate Function Select Register */
-#define PC_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000080UL)) /* PC_XX Pad Alternate Function Select Register */
-#define PD_AFSR ((P_Port_D_Def *) (P_AFSR_BASE + 0x000000C0UL)) /* PD_XX Pad Alternate Function Select Register */
-
-#define PA_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000000UL)) /* PA_XX Pad Control Register */
-#define PB_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000040UL)) /* PB_XX Pad Control Register */
-#define PC_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000080UL)) /* PC_XX Pad Control Register */
-#define PD_PCR ((P_Port_D_Def *) (P_PCR_BASE + 0x000000C0UL)) /* PD_XX Pad Control Register */
-
-#define I2C0 ((I2C_TypeDef *) I2C0_BASE)
-#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
-
-
-#define TIMCLKEN0_0 *(uint32_t *)(W7500x_DUALTIMER0_BASE + 0x80ul)
-#define TIMCLKEN0_1 *(uint32_t *)(W7500x_DUALTIMER0_BASE + 0xA0ul)
-#define TIMCLKEN1_0 *(uint32_t *)(W7500x_DUALTIMER1_BASE + 0x80ul)
-#define TIMCLKEN1_1 *(uint32_t *)(W7500x_DUALTIMER1_BASE + 0xA0ul)
-
-#define PWM ((PWM_TypeDef *) (W7500x_PWM_BASE + 0x800UL ))
-#define PWM_CH0 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE))
-#define PWM_CH1 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x100UL))
-#define PWM_CH2 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x200UL))
-#define PWM_CH3 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x300UL))
-#define PWM_CH4 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x400UL))
-#define PWM_CH5 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x500UL))
-#define PWM_CH6 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x600UL))
-#define PWM_CH7 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x700UL))
-
-#define PWM_CH0_BASE (W7500x_PWM_BASE)
-#define PWM_CH1_BASE (W7500x_PWM_BASE + 0x100UL)
-#define PWM_CH2_BASE (W7500x_PWM_BASE + 0x200UL)
-#define PWM_CH3_BASE (W7500x_PWM_BASE + 0x300UL)
-#define PWM_CH4_BASE (W7500x_PWM_BASE + 0x400UL)
-#define PWM_CH5_BASE (W7500x_PWM_BASE + 0x500UL)
-#define PWM_CH6_BASE (W7500x_PWM_BASE + 0x600UL)
-#define PWM_CH7_BASE (W7500x_PWM_BASE + 0x700UL)
-
-#define RNG ((RNG_TypeDef *) W7500x_RNG_BASE)
-
-#define SSP0 ((SSP_TypeDef*) (SSP0_BASE))
-#define SSP1 ((SSP_TypeDef*) (SSP1_BASE))
-
-#define WATCHDOG ((WATCHDOG_TypeDef *) W7500x_WATCHDOG_BASE)
-
-/**
- * @}
- */
-
-
-
-/******************************************************************************/
-/* */
-/* Clock Reset Generator */
-/* */
-/******************************************************************************/
-/**************** Bit definition for CRG_OSC_PDR **************************/
-#define CRG_OSC_PDR_NRMLOP (0x0ul) // Normal Operation
-#define CRG_OSC_PDR_PD (0x1ul) // Power Down
-/**************** Bit definition for CRG_PLL_PDR **************************/
-#define CRG_PLL_PDR_PD (0x0ul) // Power Down
-#define CRG_PLL_PDR_NRMLOP (0x1ul) // Normal Operation
-/**************** Bit definition for CRG_PLL_FCR **************************/
-//ToDo
-/**************** Bit definition for CRG_PLL_OER **************************/
-#define CRG_PLL_OER_DIS (0x0ul) // Clock out is disable
-#define CRG_PLL_OER_EN (0x1ul) // Clock out is enable
-/**************** Bit definition for CRG_PLL_BPR **************************/
-#define CRG_PLL_BPR_DIS (0x0ul) // Bypass disable. Normal operation
-#define CRG_PLL_BPR_EN (0x1ul) // Bypass enable. Clock will be set to external clock
-/**************** Bit definition for CRG_PLL_IFSR **************************/
-#define CRG_PLL_IFSR_RCLK (0x0ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_PLL_IFSR_OCLK (0x1ul) // External oscillator clock (OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_FCLK_SSR **************************/
-#define CRG_FCLK_SSR_MCLK (0x01ul) // 00,01 Output clock of PLL(MCLK)
-#define CRG_FCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_FCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_FCLK_PVSR **************************/
-#define CRG_FCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_FCLK_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_FCLK_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_FCLK_PVSR_DIV8 (0x03ul) // 1/8
-/**************** Bit definition for CRG_SSPCLK_SSR **************************/
-#define CRG_SSPCLK_SSR_DIS (0x00ul) // Disable clock
-#define CRG_SSPCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_SSPCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_SSPCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_SSPCLK_PVSR **************************/
-#define CRG_SSPCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_SSPCLK_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_SSPCLK_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_SSPCLK_PVSR_DIV8 (0x03ul) // 1/8
-/**************** Bit definition for CRG_ADCCLK_SSR **************************/
-#define CRG_ADCCLK_SSR_DIS (0x00ul) // Disable clock
-#define CRG_ADCCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_ADCCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_ADCCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_ADCCLK_PVSR **************************/
-#define CRG_ADCCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_ADCCLK_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_ADCCLK_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_ADCCLK_PVSR_DIV8 (0x03ul) // 1/8
-/**************** Bit definition for CRG_TIMER0/1CLK_SSR **************************/
-#define CRG_TIMERCLK_SSR_DIS (0x00ul) // Disable clock
-#define CRG_TIMERCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_TIMERCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_TIMERCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_TIMER0/1CLK_PVSR **************************/
-#define CRG_TIMERCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_TIMERCLK_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_TIMERCLK_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_TIMERCLK_PVSR_DIV8 (0x03ul) // 1/8
-#define CRG_TIMERCLK_PVSR_DIV16 (0x04ul) // 1/16
-#define CRG_TIMERCLK_PVSR_DIV32 (0x05ul) // 1/32
-#define CRG_TIMERCLK_PVSR_DIV64 (0x06ul) // 1/64
-#define CRG_TIMERCLK_PVSR_DIV128 (0x07ul) // 1/128
-/**************** Bit definition for CRG_PWMnCLK_SSR **************************/
-#define CRG_PWMCLK_SSR_DIS (0x00ul) // Disable clock
-#define CRG_PWMCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_PWMCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_PWMCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_PWMnCLK_PVSR **************************/
-#define CRG_PWMCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_PWMCLK_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_PWMCLK_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_PWMCLK_PVSR_DIV8 (0x03ul) // 1/8
-#define CRG_PWMCLK_PVSR_DIV16 (0x04ul) // 1/16
-#define CRG_PWMCLK_PVSR_DIV32 (0x05ul) // 1/32
-#define CRG_PWMCLK_PVSR_DIV64 (0x06ul) // 1/64
-#define CRG_PWMCLK_PVSR_DIV128 (0x07ul) // 1/128
-/**************** Bit definition for CRG_RTC_HS_SSR **************************/
-#define CRG_RTC_HS_SSR_DIS (0x00ul) // Disable clock
-#define CRG_RTC_HS_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_RTC_HS_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_RTC_HS_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_RTC_HS_PVSR **************************/
-#define CRG_RTC_HS_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_RTC_HS_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_RTC_HS_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_RTC_HS_PVSR_DIV8 (0x03ul) // 1/8
-#define CRG_RTC_HS_PVSR_DIV16 (0x04ul) // 1/16
-#define CRG_RTC_HS_PVSR_DIV32 (0x05ul) // 1/32
-#define CRG_RTC_HS_PVSR_DIV64 (0x06ul) // 1/64
-#define CRG_RTC_HS_PVSR_DIV128 (0x07ul) // 1/128
-/**************** Bit definition for CRG_RTC_SSR **************************/
-#define CRG_RTC_SSR_HS (0x00ul) // RTCCLK HS(High Speed clock)
-#define CRG_RTC_SSR_LW (0x01ul) // 32K_OSC_CLK(Low Speed external oscillator clock)
-/**************** Bit definition for CRG_WDOGCLK_HS_SSR **************************/
-#define CRG_WDOGCLK_HS_SSR_DIS (0x00ul) // Disable clock
-#define CRG_WDOGCLK_HS_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_WDOGCLK_HS_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_WDOGCLK_HS_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_WDOGCLK_HS_PVSR **************************/
-#define CRG_WDOGCLK_HS_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_WDOGCLK_HS_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_WDOGCLK_HS_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_WDOGCLK_HS_PVSR_DIV8 (0x03ul) // 1/8
-#define CRG_WDOGCLK_HS_PVSR_DIV16 (0x04ul) // 1/16
-#define CRG_WDOGCLK_HS_PVSR_DIV32 (0x05ul) // 1/32
-#define CRG_WDOGCLK_HS_PVSR_DIV64 (0x06ul) // 1/64
-#define CRG_WDOGCLK_HS_PVSR_DIV128 (0x07ul) // 1/128
-/**************** Bit definition for CRG_WDOGCLK_SSR **************************/
-#define CRG_WDOGCLK_SSR_HS (0x00ul) // RTCCLK HS(High Speed clock)
-#define CRG_WDOGCLK_SSR_LW (0x01ul) // 32K_OSC_CLK(Low Speed external oscillator clock)
-/**************** Bit definition for CRG_UARTCLK_SSR **************************/
-#define CRG_UARTCLK_SSR_DIS (0x00ul) // Disable clock
-#define CRG_UARTCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
-#define CRG_UARTCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_UARTCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-/**************** Bit definition for CRG_UARTCLK_PVSR **************************/
-#define CRG_UARTCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
-#define CRG_UARTCLK_PVSR_DIV2 (0x01ul) // 1/2
-#define CRG_UARTCLK_PVSR_DIV4 (0x02ul) // 1/4
-#define CRG_UARTCLK_PVSR_DIV8 (0x03ul) // 1/8
-/**************** Bit definition for CRG_MIICLK_ECR **************************/
-#define CRG_MIICLK_ECR_EN_RXCLK (0x01ul << 0) // Enable MII_RCK and MII_RCK_N
-#define CRG_MIICLK_ECR_EN_TXCLK (0x01ul << 1) // Enable MII_TCK and MII_TCK_N
-/**************** Bit definition for CRG_MONCLK_SSR **************************/
-#define CRG_MONCLK_SSR_MCLK (0x00ul) // PLL output clock (MCLK)
-#define CRG_MONCLK_SSR_FCLK (0x01ul) // FCLK
-#define CRG_MONCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
-#define CRG_MONCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
-#define CRG_MONCLK_SSR_ADCCLK (0x04ul) // ADCCLK
-#define CRG_MONCLK_SSR_SSPCLK (0x05ul) // SSPCLK
-#define CRG_MONCLK_SSR_TIMCLK0 (0x06ul) // TIMCLK0
-#define CRG_MONCLK_SSR_TIMCLK1 (0x07ul) // TIMCLK1
-#define CRG_MONCLK_SSR_PWMCLK0 (0x08ul) // PWMCLK0
-#define CRG_MONCLK_SSR_PWMCLK1 (0x09ul) // PWMCLK1
-#define CRG_MONCLK_SSR_PWMCLK2 (0x0Aul) // PWMCLK2
-#define CRG_MONCLK_SSR_PWMCLK3 (0x0Bul) // PWMCLK3
-#define CRG_MONCLK_SSR_PWMCLK4 (0x0Cul) // PWMCLK4
-#define CRG_MONCLK_SSR_PWMCLK5 (0x0Dul) // PWMCLK5
-#define CRG_MONCLK_SSR_PWMCLK6 (0x0Eul) // PWMCLK6
-#define CRG_MONCLK_SSR_PWMCLK7 (0x0Ful) // PWMCLK7
-#define CRG_MONCLK_SSR_UARTCLK (0x10ul) // UARTCLK
-#define CRG_MONCLK_SSR_MII_RXCLK (0x11ul) // MII_RXCLK
-#define CRG_MONCLK_SSR_MII_TXCLK (0x12ul) // MII_TXCLK
-#define CRG_MONCLK_SSR_RTCCLK (0x13ul) // RTCCLK
-
-/******************************************************************************/
-/* */
-/* UART */
-/* */
-/******************************************************************************/
-/****************** Bit definition for UART Data(UARTDR) register *************************/
-#define UART_DR_OE (0x01ul << 11) // Overrun Error
-#define UART_DR_BE (0x01ul << 10) // Break Error
-#define UART_DR_PE (0x01ul << 9) // Parity Error
-#define UART_DR_FE (0x01ul << 8) // Framing Error
-//#define UART_DR_DR // ToDo
-/***************** Bit definition for UART Receive Status(UARTRSR) register ***************/
-#define UARTR_SR_OE (0x01ul << 3) // Overrun Error
-#define UARTR_SR_BE (0x01ul << 2) // Break Error
-#define UARTR_SR_PE (0x01ul << 1) // Parity Error
-#define UARTR_SR_FE (0x01ul << 0) // Framing Error
-/***************** Bit definition for UART Error Clear(UARTECR) register ******************/
-#define UARTE_CR_OE (0x01ul << 3) // Overrun Error
-#define UARTE_CR_BE (0x01ul << 2) // Break Error
-#define UARTE_CR_PE (0x01ul << 1) // Parity Error
-#define UARTE_CR_FE (0x01ul << 0) // Framing Error
-/****************** Bit definition for UART Flags(UARTFR) register ************************/
-#define UART_FR_RI (0x01ul << 8) // Ring indicator
-#define UART_FR_TXFE (0x01ul << 7) // Transmit FIFO empty
-#define UART_FR_RXFF (0x01ul << 6) // Receive FIFO full
-#define UART_FR_TXFF (0x01ul << 5) // Transmit FIFO full
-#define UART_FR_RXFE (0x01ul << 4) // Receive FIFO empty
-#define UART_FR_BUSY (0x01ul << 3) // UART busy
-#define UART_FR_DCD (0x01ul << 2) // Data carrier detect
-#define UART_FR_DSR (0x01ul << 1) // Data set ready
-#define UART_FR_CTS (0x01ul << 0) // Clear to send
-/********** Bit definition for UART Low-power Counter(UARTILPR) register *******************/
-#define UARTILPR_COUNTER (0xFFul << 0) // 8-bit low-power divisor value (0..255)
-/********************* Bit definition for Line Control(UARTLCR_H) register *****************/
-#define UART_LCR_H_SPS (0x1ul << 7) // Stick parity select
-#define UART_LCR_H_WLEN(n) ((n & 0x3ul) << 5) // Word length ( 0=5bits, 1=6bits, 2=7bits, 3=8bits )
-#define UART_LCR_H_FEN (0x1ul << 4) // Enable FIFOs
-#define UART_LCR_H_STP2 (0x1ul << 3) // Two stop bits select
-#define UART_LCR_H_EPS (0x1ul << 2) // Even parity select
-#define UART_LCR_H_PEN (0x1ul << 1) // Parity enable
-#define UART_LCR_H_BRK (0x1ul << 0) // Send break
-/********************* Bit definition for Contro(UARTCR) register *************************/
-#define UART_CR_CTSEn (0x1ul << 15) // CTS hardware flow control enable
-#define UART_CR_RTSEn (0x1ul << 14) // RTS hardware flow control enable
-#define UART_CR_Out2 (0x1ul << 13) // Complement of Out2 modem status output
-#define UART_CR_Out1 (0x1ul << 12) // Complement of Out1 modem status output
-#define UART_CR_RTS (0x1ul << 11) // Request to send
-#define UART_CR_DTR (0x1ul << 10) // Data transmit ready
-#define UART_CR_RXE (0x1ul << 9) // Receive enable
-#define UART_CR_TXE (0x1ul << 8) // Transmit enable
-#define UART_CR_LBE (0x1ul << 7) // Loop-back enable
-#define UART_CR_SIRLP (0x1ul << 2) // IrDA SIR low power mode
-#define UART_CR_SIREN (0x1ul << 1) // SIR enable
-#define UART_CR_UARTEN (0x1ul << 0) // UART enable
-/******* Bit definition for Interrupt FIFO Level Select(UARTIFLS) register *****************/
-#define UART_IFLS_RXIFLSEL(n) ((n & 0x7ul) << 3) // Receive interrupt FIFO level select(0=1/8 full, 1=1/4 full, 2=1/2 full, 3=3/4 full, 4=7/8 full)
-#define UART_IFLS_TXIFLSEL(n) ((n & 0x7ul) << 0) // Transmit interrupt FIFO level select(0=1/8 full, 1=1/4 full, 2=1/2 full, 3=3/4 full, 4=7/8 full)
-/******* Bit definition for Interrupt Mask Set/Clear(UARTIMSC) register ********************/
-#define UART_IMSC_OEIM (0x1ul << 10) // Overrun error interrupt mask
-#define UART_IMSC_BEIM (0x1ul << 9) // Break error interrupt mask
-#define UART_IMSC_PEIM (0x1ul << 8) // Parity error interrupt mask
-#define UART_IMSC_FEIM (0x1ul << 7) // Framing error interrupt mask
-#define UART_IMSC_RTIM (0x1ul << 6) // Receive interrupt mask
-#define UART_IMSC_TXIM (0x1ul << 5) // Transmit interrupt mask
-#define UART_IMSC_RXIM (0x1ul << 4) // Receive interrupt mask
-#define UART_IMSC_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt mask
-#define UART_IMSC_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt mask
-#define UART_IMSC_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt mask
-#define UART_IMSC_RIMIM (0x1ul << 0) // nUARTRI modem interrupt mask
-/*************** Bit definition for Raw Interrupt Status(UARTRIS) register *****************/
-#define UART_RIS_OEIM (0x1ul << 10) // Overrun error interrupt status
-#define UART_RIS_BEIM (0x1ul << 9) // Break error interrupt status
-#define UART_RIS_PEIM (0x1ul << 8) // Parity error interrupt status
-#define UART_RIS_FEIM (0x1ul << 7) // Framing error interrupt status
-#define UART_RIS_RTIM (0x1ul << 6) // Receive interrupt status
-#define UART_RIS_TXIM (0x1ul << 5) // Transmit interrupt status
-#define UART_RIS_RXIM (0x1ul << 4) // Receive interrupt status
-#define UART_RIS_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt status
-#define UART_RIS_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt status
-#define UART_RIS_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt status
-#define UART_RIS_RIMIM (0x1ul << 0) // nUARTRI modem interrupt status
-/************** Bit definition for Masked Interrupt Status(UARTMIS) register ****************/
-#define UART_MIS_OEIM (0x1ul << 10) // Overrun error masked interrupt status
-#define UART_MIS_BEIM (0x1ul << 9) // Break error masked interrupt status
-#define UART_MIS_PEIM (0x1ul << 8) // Parity error masked interrupt status
-#define UART_MIS_FEIM (0x1ul << 7) // Framing error masked interrupt status
-#define UART_MIS_RTIM (0x1ul << 6) // Receive masked interrupt status
-#define UART_MIS_TXIM (0x1ul << 5) // Transmit masked interrupt status
-#define UART_MIS_RXIM (0x1ul << 4) // Receive masked interrupt status
-#define UART_MIS_DSRMIM (0x1ul << 3) // nUARTDSR modem masked interrupt status
-#define UART_MIS_DCDMIM (0x1ul << 2) // nUARTDCD modem masked interrupt status
-#define UART_MIS_CTSMIM (0x1ul << 1) // nUARTCTS modem masked interrupt status
-#define UART_MIS_RIMIM (0x1ul << 0) // nUARTRI modem masked interrupt status
-/*************** Bit definition for Interrupt Clear(UARTICR) register ************************/
-#define UART_ICR_OEIM (0x1ul << 10) // Overrun error interrupt clear
-#define UART_ICR_BEIM (0x1ul << 9) // Break error interrupt clear
-#define UART_ICR_PEIM (0x1ul << 8) // Parity error interrupt clear
-#define UART_ICR_FEIM (0x1ul << 7) // Framing error interrupt clear
-#define UART_ICR_RTIM (0x1ul << 6) // Receive interrupt clear
-#define UART_ICR_TXIM (0x1ul << 5) // Transmit interrupt clear
-#define UART_ICR_RXIM (0x1ul << 4) // Receive interrupt clear
-#define UART_ICR_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt clear
-#define UART_ICR_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt clear
-#define UART_ICR_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt clear
-#define UART_ICR_RIMIM (0x1ul << 0) // nUARTRI modem interrupt clear
-/***************** Bit definition for DMA Control(UARTDMACR) register ************************/
-#define UART_DMACR_DMAONERR (0x1ul << 2) // DMA on error
-#define UART_DMACR_TXDMAE (0x1ul << 1) // Transmit DMA enable
-#define UART_DMACR_RXDMAE (0x1ul << 0) // Receive DMA enable
-
-/******************************************************************************/
-/* */
-/* Simple UART */
-/* */
-/******************************************************************************/
-/***************** Bit definition for S_UART Data () register ************************/
-#define S_UART_DATA (0xFFul << 0)
-/***************** Bit definition for S_UART State() register ************************/
-#define S_UART_STATE_TX_BUF_OVERRUN (0x01ul << 2) // TX buffer overrun, wirte 1 to clear.
-#define S_UART_STATE_RX_BUF_FULL (0x01ul << 1) // RX buffer full, read only.
-#define S_UART_STATE_TX_BUF_FULL (0x01ul << 0) // TX buffer full, read only.
-/***************** Bit definition for S_UART Control() register ************************/
-#define S_UART_CTRL_HIGH_SPEED_TEST (0x01ul << 6) // High-speed test mode for TX only.
-#define S_UART_CTRL_RX_OVERRUN_EN (0x01ul << 5) // RX overrun interrupt enable.
-#define S_UART_CTRL_TX_OVERRUN_EN (0x01ul << 4) // TX overrun interrupt enable.
-#define S_UART_CTRL_RX_INT_EN (0x01ul << 3) // RX interrupt enable.
-#define S_UART_CTRL_TX_INT_EN (0x01ul << 2) // TX interrupt enable.
-#define S_UART_CTRL_RX_EN (0x01ul << 1) // RX enable.
-#define S_UART_CTRL_TX_EN (0x01ul << 0) // TX enable.
-/***************** Bit definition for S_UART Interrupt() register ************************/
-#define S_UART_INT_RX_OVERRUN (0x01ul << 3) // RX overrun interrupt. Wirte 1 to clear
-#define S_UART_INT_TX_OVERRUN (0x01ul << 2) // TX overrun interrupt. Write 1 to clear
-#define S_UART_INT_RX (0x01ul << 1) // RX interrupt. Write 1 to clear
-#define S_UART_INT_TX (0x01ul << 0) // TX interrupt. Write 1 to clear
-
-/******************************************************************************/
-/* */
-/* Analog Digital Register */
-/* */
-/******************************************************************************/
-
-/*********************** Bit definition for ADC_CTR ***********************/
-//#define ADC_CTR_SAMSEL_ABNORMAL (0x0ul) // Abnormal Operation
-//#define ADC_CTR_SAMSEL_NORMAL (0x1ul) // Normal Operation
-#define ADC_CTR_PWD_NRMOP (0x1ul) // Active Operation
-#define ADC_CTR_PWD_PD (0x3ul) // Power down
-/*********************** Bit definition for ADC_CHSEL ***********************/
-#define ADC_CHSEL_CH0 (0x0ul) // Channel 0
-#define ADC_CHSEL_CH1 (0x1ul) // Channel 1
-#define ADC_CHSEL_CH2 (0x2ul) // Channel 2
-#define ADC_CHSEL_CH3 (0x3ul) // Channel 3
-#define ADC_CHSEL_CH4 (0x4ul) // Channel 4
-#define ADC_CHSEL_CH5 (0x5ul) // Channel 5
-#define ADC_CHSEL_CH6 (0x6ul) // Channel 6
-#define ADC_CHSEL_CH7 (0x7ul) // Channel 7
-#define ADC_CHSEL_CH15 (0xful) // LDO output(1.5V)
-/*********************** Bit definition for ADC_START ***********************/
-#define ADC_START_START (0x1ul) // ADC conversion start
-/*********************** Bit definition for ADC_DATA ***********************/
-//ToDo (Readonly)
-
-/*********************** Bit definition for ADC_INT ***********************/
-#define ADC_INT_MASK_DIS (0x0ul << 1) // Interrupt disable
-#define ADC_INT_MASK_ENA (0x1ul << 1) // Interrupt enable
-//ToDo (Readonly)
-
-/*********************** Bit definition for ADC_INTCLR ***********************/
-#define ADC_INTCLEAR (0x1ul) // ADC Interrupt clear
-
-#define W7500x_ADC_BASE (W7500x_APB2_BASE + 0x00000000UL)
-#define ADC ((ADC_TypeDef *) W7500x_ADC_BASE)
-
-/******************************************************************************/
-/* */
-/* Dual Timer */
-/* */
-/******************************************************************************/
-
-/*********************** Bit definition for dualtimer ***********************/
-#define DUALTIMER_TimerControl_TimerDIsable 0x0ul
-#define DUALTIMER_TimerControl_TimerEnable 0x1ul
-#define DUALTIMER_TimerControl_TimerEnable_Pos 7
-
-#define DUALTIMER_TimerControl_FreeRunning 0x0ul
-#define DUALTIMER_TimerControl_Periodic 0x1ul
-#define DUALTIMER_TimerControl_TimerMode_Pos 6
-
-#define DUALTIMER_TimerControl_IntDisable 0x0ul
-#define DUALTIMER_TimerControl_IntEnable 0x1ul
-#define DUALTIMER_TimerControl_IntEnable_Pos 5
-
-#define DUALTIMER_TimerControl_Pre_1 0x0ul
-#define DUALTIMER_TimerControl_Pre_16 0x1ul
-#define DUALTIMER_TimerControl_Pre_256 0x2ul
-#define DUALTIMER_TimerControl_Pre_Pos 2
-
-#define DUALTIMER_TimerControl_Size_16 0x0ul
-#define DUALTIMER_TimerControl_Size_32 0x1ul
-#define DUALTIMER_TimerControl_Size_Pos 1
-
-#define DUALTIMER_TimerControl_Wrapping 0x0ul
-#define DUALTIMER_TimerControl_OneShot 0x1ul
-#define DUALTIMER_TimerControl_OneShot_Pos 0
-
-/******************************************************************************/
-/* */
-/* External Interrupt */
-/* */
-/******************************************************************************/
-
-/**************** Bit definition for Px_IER **************************/
-#define EXTI_Px_INTPOR_RISING_EDGE (0x00ul << 0)
-#define EXTI_Px_INTPOR_FALLING_EDGE (0x01ul << 0)
-#define EXTI_Px_INTEN_DISABLE (0x00ul << 1)
-#define EXTI_Px_INTEN_ENABLE (0x01ul << 1)
-
-/******************************************************************************/
-/* */
-/* GPIO */
-/* */
-/******************************************************************************/
-
-/**************** Bit definition for Px_AFSR **************************/
-#define Px_AFSR_AF0 (0x00ul)
-#define Px_AFSR_AF1 (0x01ul)
-#define Px_AFSR_AF2 (0x02ul)
-#define Px_AFSR_AF3 (0x03ul)
-/**************** Bit definition for Px_PCR **************************/
-#define Px_PCR_PUPD_DOWN (0x01ul << 0) // Pull Down
-#define Px_PCR_PUPD_UP (0x01ul << 1) // Pull Up
-#define Px_PCR_DS_HIGH (0x01ul << 2) // High Driving
-#define Px_PCR_OD (0x01ul << 3) // Open Drain
-#define Px_PCR_IE (0x01ul << 5) // Input Buffer Enable
-#define Px_PCR_CS_SUMMIT (0x01ul << 6) // Use Summit Trigger Input Buffer
-
-/******************************************************************************/
-/* */
-/* I2C */
-/* */
-/******************************************************************************/
-
-/**************** Bit definition for I2C_CTR **************************/
-#define I2C_CTR_COREEN (0x01ul << 7 ) // 0x80
-#define I2C_CTR_INTEREN (0x01ul << 6 ) // 0x40
-#define I2C_CTR_MODE (0x01ul << 5 ) // 0x20
-#define I2C_CTR_ADDR10 (0x01ul << 4 ) // 0x10
-#define I2C_CTR_CTRRWN (0x01ul << 3 ) // 0x08
-#define I2C_CTR_CTEN (0x01ul << 2 ) // 0x04
-
-/**************** Bit definition for I2C_CMDR **************************/
-#define I2C_CMDR_STA (0x01ul << 7 ) // 0x80
-#define I2C_CMDR_STO (0x01ul << 6 ) // 0x40
-#define I2C_CMDR_ACK (0x01ul << 5 ) // 0x20
-#define I2C_CMDR_RESTA (0x01ul << 4 ) // 0x10
-
-/**************** Bit definition for I2C_ISCR **************************/
-#define I2C_ISCR_RST (0x01ul << 1) // 0x01
-
-/**************** Bit definition for I2C_SR **************************/
-#define I2C_SR_TX (0x01ul << 9 ) // 0x200
-#define I2C_SR_RX (0x01ul << 8 ) // 0x100
-#define I2C_SR_ACKT (0x01ul << 7 ) // 0x080
-#define I2C_SR_BT (0x01ul << 6 ) // 0x040
-#define I2C_SR_SA (0x01ul << 5 ) // 0x020
-#define I2C_SR_SB (0x01ul << 4 ) // 0x010
-#define I2C_SR_AL (0x01ul << 3 ) // 0x008
-#define I2C_SR_TO (0x01ul << 2 ) // 0x004
-#define I2C_SR_SRW (0x01ul << 1 ) // 0x002
-#define I2C_SR_ACKR (0x01ul << 0 ) // 0x001
-
-/**************** Bit definition for I2C_ISR **************************/
-#define I2C_ISR_STAE (0x01ul << 4 ) // 0x010
-#define I2C_ISR_STOE (0x01ul << 3 ) // 0x008
-#define I2C_ISR_TOE (0x01ul << 2 ) // 0x004
-#define I2C_ISR_ACK_RXE (0x01ul << 1 ) // 0x002
-#define I2C_ISR_ACK_TXE (0x01ul << 0 ) // 0x001
-
-/**************** Bit definition for I2C_ISMR **************************/
-#define I2C_ISR_STAEM (0x01ul << 4 ) // 0x010
-#define I2C_ISR_STOEM (0x01ul << 3 ) // 0x008
-#define I2C_ISR_TOEM (0x01ul << 2 ) // 0x004
-#define I2C_ISR_ACK_RXEM (0x01ul << 1 ) // 0x002
-#define I2C_ISR_ACK_TXEM (0x01ul << 0 ) // 0x001
-
-/******************************************************************************/
-/* */
-/* PWM */
-/* */
-/******************************************************************************/
-
-/******************************************************************************/
-/* */
-/* Random number generator Register */
-/* */
-/******************************************************************************/
-
-/*********************** Bit definition for RNG_RUN ***********************/
-#define RNG_RUN_STOP (0x0ul) // STOP RNG shift register
-#define RNG_RUN_RUN (0x1ul) // RUN RNG shift register
-/*********************** Bit definition for RNG_SEED ***********************/
-//ToDo
-
-/*********************** Bit definition for RNG_CLKSEL ***********************/
-#define RNG_CLKSEL_RNGCLK (0x0ul) // RNGCLK is source clock for rng shift register
-#define RNG_CLKSEL_APBCLK (0x1ul) // APBCLK is source clock for rng shift register
-/*********************** Bit definition for RNG_ENABLE ***********************/
-#define RNG_MANUAL_DISABLE (0x0ul) // RNG disble
-#define RNG_MANUAL_ENABLE (0x1ul) // RNG enable
-/*********************** Bit definition for RNG_RN ***********************/
-//ToDo
-
-/*********************** Bit definition for RNG_POLY ***********************/
-//ToDo
-
-
-
-typedef enum
-{
- PAD_PA = 0,
- PAD_PB,
- PAD_PC,
- PAD_PD
-}PAD_Type;
-
-typedef enum
-{
- PAD_AF0 = Px_AFSR_AF0,
- PAD_AF1 = Px_AFSR_AF1,
- PAD_AF2 = Px_AFSR_AF2,
- PAD_AF3 = Px_AFSR_AF3
-}PAD_AF_TypeDef;
-
-
-#if !defined (USE_HAL_DRIVER)
-#define USE_HAL_DRIVER
-#endif /* USE_HAL_DRIVER */
-
-
-
-#if defined (USE_HAL_DRIVER)
-// #include "system_W7500x.h"
-// #include "W7500x_conf.h"
-#endif
-
-#ifdef USE_FULL_ASSERT
- #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__,__LINE__))
-#else
- #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* W7500x_H */
-
-
-
-/************************ (C) COPYRIGHT Wiznet *****END OF FILE****/
+/**************************************************************************//**
+ * @file W7500x.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
+ * Device W7500x
+ * @version V3.01
+ * @date 06. March 2012
+ *
+ * @note
+ * Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef W7500x_H
+#define W7500x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup W7500x_Definitions W7500x Definitions
+ This file defines all structures and symbols for W7500x:
+ - registers and bitfields
+ - peripheral base address
+ - peripheral ID
+ - Peripheral definitions
+ @{
+*/
+
+
+/******************************************************************************/
+/* Processor and Core Peripherals */
+/******************************************************************************/
+/** @addtogroup W7500x_CMSIS Device CMSIS Definitions
+ Configuration of the Cortex-M0 Processor and Core Peripherals
+ @{
+*/
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+
+typedef enum IRQn
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************/
+
+/* ToDo: use this Cortex interrupt numbers if your device is a CORTEX-M0 device */
+ NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M0 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+/****** W7500x Specific Interrupt Numbers *********************************************************/
+ SSP0_IRQn = 0, /*!< SSP 0 Interrupt */
+ SSP1_IRQn = 1, /*!< SSP 1 Interrupt */
+ UART0_IRQn = 2, /*!< UART 0 Interrupt */
+ UART1_IRQn = 3, /*!< UART 1 Interrupt */
+ UART2_IRQn = 4, /*!< UART 2 Interrupt */
+ I2C0_IRQn = 5, /*!< I2C 0 Interrupt */
+ I2C1_IRQn = 6, /*!< I2C 1 Interrupt */
+ PORT0_IRQn = 7, /*!< Port 1 combined Interrupt */
+ PORT1_IRQn = 8, /*!< Port 2 combined Interrupt */
+ PORT2_IRQn = 9, /*!< Port 2 combined Interrupt */
+ PORT3_IRQn = 10, /*!< Port 2 combined Interrupt */
+ DMA_IRQn = 11, /*!< DMA combined Interrupt */
+ DUALTIMER0_IRQn = 12, /*!< Dual Timer 0 Interrupt */
+ DUALTIMER1_IRQn = 13, /*!< Dual Timer 1 Interrupt */
+ PWM0_IRQn = 14, /*!< PWM 0 Interrupt */
+ PWM1_IRQn = 15, /*!< PWM 1 Interrupt */
+ PWM2_IRQn = 16, /*!< PWM 2 Interrupt */
+ PWM3_IRQn = 17, /*!< PWM 3 Interrupt */
+ PWM4_IRQn = 18, /*!< PWM 4 Interrupt */
+ PWM5_IRQn = 19, /*!< PWM 5 Interrupt */
+ PWM6_IRQn = 20, /*!< PWM 6 Interrupt */
+ PWM7_IRQn = 21, /*!< PWM 7 Interrupt */
+ RTC_IRQn = 22, /*!< RTC Interrupt */
+ ADC_IRQn = 23, /*!< ADC Interrupt */
+ WZTOE_IRQn = 24, /*!< WZTOE Interrupt */
+ EXTI_IRQn = 25 /*!< EXTI Interrupt */
+} IRQn_Type;
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M0 Processor and Core Peripherals */
+#define __CM0_REV 0x0000 /*!< Core Revision r0p0 */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+
+/*@}*/ /* end of group W7500x_CMSIS */
+
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_W7500x.h" /* W7500x System include file */
+
+
+/** @addtogroup Exported_types
+ * @{
+ */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+
+
+
+/**
+ * @}
+ */
+
+
+
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Clock Reset Generator
+ */
+typedef struct
+{
+ __IO uint32_t OSC_PDR; /*!< Oscillator power down register, Address offset : 0x00 */
+ uint32_t RESERVED0[3];
+ __IO uint32_t PLL_PDR; /*!< PLL power down register, Address offset : 0x10 */
+ __IO uint32_t PLL_FCR; /*!< PLL frequency calculating register, Address offset : 0x14 */
+ __IO uint32_t PLL_OER; /*!< PLL output enable register, Address offset : 0x18 */
+ __IO uint32_t PLL_BPR; /*!< PLL bypass register, Address offset : 0x1c */
+ __IO uint32_t PLL_IFSR; /*!< PLL input frequency select register, Address offset : 0x20 */
+ uint32_t RESERVED1[3];
+ __IO uint32_t FCLK_SSR; /*!< FCLK source select register, Address offset : 0x30 */
+ __IO uint32_t FCLK_PVSR; /*!< FCLK prescale value select register, Address offset : 0x34 */
+ uint32_t RESERVED2[2];
+ __IO uint32_t SSPCLK_SSR; /*!< SSPCLK source select register, Address offset : 0x40 */
+ __IO uint32_t SSPCLK_PVSR; /*!< SSPCLK prescale value select register, Address offset : 0x44 */
+ uint32_t RESERVED3[6];
+ __IO uint32_t ADCCLK_SSR; /*!< ADCCLK source select register, Address offset : 0x60 */
+ __IO uint32_t ADCCLK_PVSR; /*!< ADCCLK prescale value select register, Address offset : 0x64 */
+ uint32_t RESERVED4[2];
+ __IO uint32_t TIMER0CLK_SSR; /*!< TIMER0CLK source select register, Address offset : 0x70 */
+ __IO uint32_t TIMER0CLK_PVSR; /*!< TIMER0CLK prescale value select register, Address offset : 0x74 */
+ uint32_t RESERVED5[2];
+ __IO uint32_t TIMER1CLK_SSR; /*!< TIMER1CLK source select register, Address offset : 0x80 */
+ __IO uint32_t TIMER1CLK_PVSR; /*!< TIMER1CLK prescale value select register, Address offset : 0x84 */
+ uint32_t RESERVED6[10];
+ __IO uint32_t PWM0CLK_SSR; /*!< PWM0CLK source select register, Address offset : 0xb0 */
+ __IO uint32_t PWM0CLK_PVSR; /*!< PWM0CLK prescale value select register, Address offset : 0xb4 */
+ uint32_t RESERVED7[2];
+ __IO uint32_t PWM1CLK_SSR; /*!< PWM1CLK source select register, Address offset : 0xc0 */
+ __IO uint32_t PWM1CLK_PVSR; /*!< PWM1CLK prescale value select register, Address offset : 0xc4 */
+ uint32_t RESERVED8[2];
+ __IO uint32_t PWM2CLK_SSR; /*!< PWM2CLK source select register, Address offset : 0xd0 */
+ __IO uint32_t PWM2CLK_PVSR; /*!< PWM2CLK prescale value select register, Address offset : 0xd4 */
+ uint32_t RESERVED9[2];
+ __IO uint32_t PWM3CLK_SSR; /*!< PWM3CLK source select register, Address offset : 0xe0 */
+ __IO uint32_t PWM3CLK_PVSR; /*!< PWM3CLK prescale value select register, Address offset : 0xe4 */
+ uint32_t RESERVED10[2];
+ __IO uint32_t PWM4CLK_SSR; /*!< PWM4CLK source select register, Address offset : 0xf0 */
+ __IO uint32_t PWM4CLK_PVSR; /*!< PWM4CLK prescale value select register, Address offset : 0xf4 */
+ uint32_t RESERVED11[2];
+ __IO uint32_t PWM5CLK_SSR; /*!< PWM5CLK source select register, Address offset : 0x100 */
+ __IO uint32_t PWM5LK_PVSR; /*!< PWM5CLK prescale value select register, Address offset : 0x104 */
+ uint32_t RESERVED12[2];
+ __IO uint32_t PWM6CLK_SSR; /*!< PWM6CLK source select register, Address offset : 0x110 */
+ __IO uint32_t PWM6CLK_PVSR; /*!< PWM6CLK prescale value select register, Address offset : 0x114 */
+ uint32_t RESERVED13[2];
+ __IO uint32_t PWM7CLK_SSR; /*!< PWM7CLK source select register, Address offset : 0x120 */
+ __IO uint32_t PWM7CLK_PVSR; /*!< PWM7CLK prescale value select register, Address offset : 0x124 */
+ uint32_t RESERVED14[2];
+ __IO uint32_t RTC_HS_SSR; /*!< RTC High Speed source select register, Address offset : 0x130 */
+ __IO uint32_t RTC_HS_PVSR; /*!< RTC High Speed prescale value select register, Address offset : 0x134 */
+ uint32_t RESERVED15;
+ __IO uint32_t RTC_SSR; /*!< RTC source select register, Address offset : 0x13c */
+
+ __IO uint32_t WDOGCLK_HS_SSR; /*!< WDOGCLK High Speed source select register, Address offset : 0x140 */
+ __IO uint32_t WDOGCLK_HS_PVSR; /*!< WDOGCLK High Speed prescale value select register, Address offset : 0x144 */
+ uint32_t RESERVED16;
+ __IO uint32_t WDOGCLK_SSR; /*!< WDOGCLK source select register, Address offset : 0x14c */
+
+ __IO uint32_t UARTCLK_SSR; /*!< UARTCLK source select register, Address offset : 0x150 */
+ __IO uint32_t UARTCLK_PVSR; /*!< UARTCLK prescale value select register, Address offset : 0x154 */
+ uint32_t RESERVED17[2];
+ __IO uint32_t MIICLK_ECR; /*!< MII clock enable control register, Address offset : 0x160 */
+ uint32_t RESERVED18[3];
+ __IO uint32_t MONCLK_SSR; /*!< Monitoring clock source select I found Treasure was IoT Base Station in March.register, Address offset : 0x170 */
+}CRG_TypeDef;
+
+
+/**
+ * @brief UART
+ */
+typedef struct
+{
+ __IO uint32_t DR; /*!< Data, Address offset : 0x00 */
+ union {
+ __I uint32_t RSR; /*!< Receive Status, Address offset : 0x04 */
+ __O uint32_t ECR; /*!< Error Clear, Address offset : 0x04 */
+ } STATUS;
+ uint32_t RESERVED0[4];
+ __IO uint32_t FR; /*!< Flags, Address offset : 0x18 */
+ uint32_t RESERVED1;
+ __IO uint32_t ILPR; /*!< IrDA Low-power Counter, Address offset : 0x20 */
+ __IO uint32_t IBRD; /*!< Integer Baud Rate, Address offset : 0x24 */
+ __IO uint32_t FBRD; /*!< Fractional Baud Rate, Address offset : 0x28 */
+ __IO uint32_t LCR_H; /*!< Line Control, Address offset : 0x2C */
+ __IO uint32_t CR; /*!< Control, Address offset : 0x30 */
+ __IO uint32_t IFLS; /*!< Interrupt FIFO Level Select, Address offset : 0x34 */
+ __IO uint32_t IMSC; /*!< Interrupt Mask Set / Clear, Address offset : 0x38 */
+ __IO uint32_t RIS; /*!< Raw Interrupt Status , Address offset : 0x3C */
+ __IO uint32_t MIS; /*!< Masked Interrupt Status , Address offset : 0x40 */
+ __O uint32_t ICR; /*!< Interrupt Clear, Address offset : 0x44 */
+ __IO uint32_t DMACR; /*!< DMA Control, Address offset : 0x48 */
+} UART_TypeDef;
+
+
+/**
+ * @brief Simple UART
+ */
+typedef struct
+{
+ __IO uint32_t DATA; /*!< Offset: 0x000 Data Register (R/W) */
+ __IO uint32_t STATE; /*!< Offset: 0x004 Status Register (R/W) */
+ __IO uint32_t CTRL; /*!< Offset: 0x008 Control Register (R/W) */
+ union {
+ __I uint32_t STATUS; /*!< Offset: 0x00C Interrupt Status Register (R/ ) */
+ __O uint32_t CLEAR; /*!< Offset: 0x00C Interrupt Clear Register ( /W) */
+ }INT;
+ __IO uint32_t BAUDDIV; /*!< Offset: 0x010 Baudrate Divider Register (R/W) */
+
+} S_UART_TypeDef;
+
+/**
+ * @brief Analog Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ADC_CTR; /* ADC control register, Address offset : 0x000 */
+ __IO uint32_t ADC_CHSEL; /* ADC channel select register, Address offset : 0x004 */
+ __IO uint32_t ADC_START; /* ADC start register, Address offset : 0x008 */
+ __I uint32_t ADC_DATA; /* ADC conversion data register, Address offset : 0x00c */
+ __IO uint32_t ADC_INT; /* ADC interrupt register, Address offset : 0x010 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ADC_INTCLR; /* ADC interrupt clear register, Address offset : 0x01c */
+}ADC_TypeDef;
+
+/**
+ * @brief dualtimer
+ */
+typedef struct
+{
+ __IO uint32_t TimerLoad; // <h> Timer Load </h>
+ __I uint32_t TimerValue; // <h> Timer Counter Current Value <r></h>
+ __IO uint32_t TimerControl; // <h> Timer Control
+ // <o.7> TimerEn: Timer Enable
+ // <o.6> TimerMode: Timer Mode
+ // <0=> Freerunning-mode
+ // <1=> Periodic mode
+ // <o.5> IntEnable: Interrupt Enable
+ // <o.2..3> TimerPre: Timer Prescale
+ // <0=> / 1
+ // <1=> / 16
+ // <2=> / 256
+ // <3=> Undefined!
+ // <o.1> TimerSize: Timer Size
+ // <0=> 16-bit counter
+ // <1=> 32-bit counter
+ // <o.0> OneShot: One-shoot mode
+ // <0=> Wrapping mode
+ // <1=> One-shot mode
+ // </h>
+ __O uint32_t TimerIntClr; // <h> Timer Interrupt Clear <w></h>
+ __I uint32_t TimerRIS; // <h> Timer Raw Interrupt Status <r></h>
+ __I uint32_t TimerMIS; // <h> Timer Masked Interrupt Status <r></h>
+ __IO uint32_t TimerBGLoad; // <h> Background Load Register </h>
+} DUALTIMER_TypeDef;
+
+/**
+ * @brief GPIO
+ */
+typedef struct
+{
+ __IO uint32_t DATA; /* DATA Register (R/W), offset : 0x000 */
+ __IO uint32_t DATAOUT; /* Data Output Latch Register (R/W), offset : 0x004 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t OUTENSET; /* Output Enable Set Register (R/W) offset : 0x010 */
+ __IO uint32_t OUTENCLR; /* Output Enable Clear Register (R/W) offset : 0x014 */
+ __IO uint32_t RESERVED1; /* Alternate Function Set Register (R/W) offset : 0x018 */
+ __IO uint32_t RESERVED2; /* Alternate Function Clear Register (R/W) offset : 0x01C */
+ __IO uint32_t INTENSET; /* Interrupt Enable Set Register (R/W) offset : 0x020 */
+ __IO uint32_t INTENCLR; /* Interrupt Enable Clear Register (R/W) offset : 0x024 */
+ __IO uint32_t INTTYPESET; /* Interrupt Type Set Register (R/W) offset : 0x028 */
+ __IO uint32_t INTTYPECLR; /* Interrupt Type Clear Register (R/W) offset : 0x02C */
+ __IO uint32_t INTPOLSET; /* Interrupt Polarity Set Register (R/W) offset : 0x030 */
+ __IO uint32_t INTPOLCLR; /* Interrupt Polarity Clear Register (R/W) offset : 0x034 */
+ union {
+ __I uint32_t INTSTATUS; /* Interrupt Status Register (R/ ) offset : 0x038 */
+ __O uint32_t INTCLEAR; /* Interrupt Clear Register ( /W) offset : 0x038 */
+ }Interrupt;
+ uint32_t RESERVED3[241];
+ __IO uint32_t LB_MASKED[256]; /* Lower byte Masked Access Register (R/W) offset : 0x400 - 0x7FC */
+ __IO uint32_t UB_MASKED[256]; /* Upper byte Masked Access Register (R/W) offset : 0x800 - 0xBFC */
+} GPIO_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t Port[16]; /* Port_00, offset : 0x00 */
+ /* Port_01, offset : 0x04 */
+ /* Port_02, offset : 0x08 */
+ /* Port_03, offset : 0x0C */
+ /* Port_04, offset : 0x10 */
+ /* Port_05, offset : 0x14 */
+ /* Port_06, offset : 0x18 */
+ /* Port_07, offset : 0x1C */
+ /* Port_08, offset : 0x20 */
+ /* Port_09, offset : 0x24 */
+ /* Port_10, offset : 0x28 */
+ /* Port_11, offset : 0x2C */
+ /* Port_12, offset : 0x30 */
+ /* Port_13, offset : 0x34 */
+ /* Port_14, offset : 0x38 */
+ /* Port_15, offset : 0x3C */
+} P_Port_Def;
+
+typedef struct
+{
+ __IO uint32_t Port[5]; /* Port_00, offset : 0x00 */
+ /* Port_01, offset : 0x04 */
+ /* Port_02, offset : 0x08 */
+ /* Port_03, offset : 0x0C */
+ /* Port_04, offset : 0x10 */
+} P_Port_D_Def;
+
+/**
+ * @brief I2C Register structure definition
+ */
+typedef struct
+{
+ __IO uint32_t PRER; //0x00
+ __IO uint32_t CTR; //0x04
+ __IO uint32_t CMDR; //0x08
+ __I uint32_t SR; //0x0C
+ __IO uint32_t TSR; //0x10
+ __IO uint32_t SADDR; //0x14
+ __IO uint32_t TXR; //0x18
+ __I uint32_t RXR; //0x1C
+ __I uint32_t ISR; //0x20
+ __IO uint32_t ISCR; //0x24
+ __IO uint32_t ISMR; //0x28
+}I2C_TypeDef;
+
+/**
+ * @brief PWM Register structure definition
+ */
+typedef struct
+{
+ __IO uint32_t IER; //Interrupt enable register
+ // <7> IE7 : Channel 7 interrupt enable <R/W>
+ // <6> IE6 : Channel 6 interrupt enable <R/W>
+ // <5> IE5 : Channel 5 interrupt enable <R/W>
+ // <4> IE4 : Channel 4 interrupt enable <R/W>
+ // <3> IE3 : Channel 3 interrupt enable <R/W>
+ // <2> IE2 : Channel 2 interrupt enable <R/W>
+ // <1> IE1 : Channel 1 interrupt enable <R/W>
+ // <0> IE0 : Channel 0 interrupt enable <R/W>
+
+ __IO uint32_t SSR; //Start Stop register
+ // <7> SS7 : Channel 7 TC start or stop <R/W>
+ // <6> SS6 : Channel 6 TC start or stop <R/W>
+ // <5> SS5 : Channel 5 TC start or stop <R/W>
+ // <4> SS4 : Channel 4 TC start or stop <R/W>
+ // <3> SS3 : Channel 3 TC start or stop <R/W>
+ // <2> SS2 : Channel 2 TC start or stop <R/W>
+ // <1> SS1 : Channel 1 TC start or stop <R/W>
+ // <0> SS0 : Channel 0 TC start or stop <R/W>
+
+ __IO uint32_t PSR; //Pause register
+ // <7> PS7 : Channel 7 TC pasue <R/W>
+ // <6> PS6 : Channel 6 TC pasue <R/W>
+ // <5> PS5 : Channel 5 TC pasue <R/W>
+ // <4> PS4 : Channel 4 TC pasue <R/W>
+ // <3> PS3 : Channel 3 TC pasue <R/W>
+ // <2> PS2 : Channel 2 TC pasue <R/W>
+ // <1> PS1 : Channel 1 TC pasue <R/W>
+ // <0> PS0 : Channel 0 TC pasue <R/W>
+} PWM_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IR; //Interrupt register
+ // <2> CI : Capture interrupt <R>
+ // <1> OI : Overflow interrupt <R>
+ // <0> MI : Match interrupt <R>
+
+ __IO uint32_t IER; //Interrupt enable register
+ // <2> CIE : Capture interrupt enable <R/W>
+ // <1> OIE : Overflow interrupt enable <R/W>
+ // <0> MIE : Match interrupt enable <R/W>
+
+ __O uint32_t ICR; //Interrupt clear register
+ // <2> CIC : Capture interrupt clear <W>
+ // <1> OIC : Overflow interrupt clear <W>
+ // <0> MIC : Match interrupt clear <W>
+
+ __I uint32_t TCR; //Timer/Counter register
+ // <0..31> TCR : Timer/Counter register <R>
+
+ __I uint32_t PCR; //Prescale counter register
+ // <0..5> PCR : Prescale Counter register <R>
+
+ __IO uint32_t PR; //Prescale register
+ // <0..5> PR : prescale register <R/W>
+
+ __IO uint32_t MR; //Match register
+ // <0..31> MR : Match register <R/W>
+
+ __IO uint32_t LR; //Limit register
+ // <0..31> LR : Limit register <R/W>
+ __IO uint32_t UDMR; //Up-Down mode register
+ // <0> UDM : Up-down mode <R/W>
+
+ __IO uint32_t TCMR; //Timer/Counter mode register
+ // <0> TCM : Timer/Counter mode <R/W>
+
+ __IO uint32_t PEEER; //PWM output enable and external input enable register
+ // <0..1> PEEE : PWM output enable and external input enable <R/W>
+
+ __IO uint32_t CMR; //Capture mode register
+ // <0> CM : Capture mode <R/W>
+
+ __IO uint32_t CR; //Capture register
+ // <0..31> CR : Capture register <R>
+
+ __IO uint32_t PDMR; //Periodic mode register
+ // <0> PDM : Periodic mode <R/W>
+
+ __IO uint32_t DZER; //Dead-zone enable register
+ // <0> DZE : Dead-zone enable <R/W>
+
+ __IO uint32_t DZCR; //Dead-zone counter register
+ // <0..9> DZC : Dead-zone counter <R/W>
+} PWM_CHn_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t PWM_CHn_PR; //Prescale register
+ // <0..5> PR : prescale register <R/W>
+ __IO uint32_t PWM_CHn_MR; //Match register
+ // <0..31> MR : Match register <R/W>
+ __IO uint32_t PWM_CHn_LR; //Limit register
+ // <0..31> LR : Limit register <R/W>
+ __IO uint32_t PWM_CHn_UDMR; //Up-Down mode register
+ // <0> UDM : Up-down mode <R/W>
+ __IO uint32_t PWM_CHn_PDMR; //Periodic mode register
+ // <0> PDM : Periodic mode <R/W>
+}PWM_TimerModeInitTypeDef;
+
+typedef struct
+{
+ __IO uint32_t PWM_CHn_PR; //Prescale register
+ // <0..5> PR : prescale register <R/W>
+ __IO uint32_t PWM_CHn_MR; //Match register
+ // <0..31> MR : Match register <R/W>
+ __IO uint32_t PWM_CHn_LR; //Limit register
+ // <0..31> LR : Limit register <R/W>
+ __IO uint32_t PWM_CHn_UDMR; //Up-Down mode register
+ // <0> UDM : Up-down mode <R/W>
+ __IO uint32_t PWM_CHn_PDMR; //Periodic mode register
+ // <0> PDM : Peiodic mode <R/W>
+ __IO uint32_t PWM_CHn_CMR; //Capture mode register
+ // <0> CM : Capture mode <R/W>
+}PWM_CaptureModeInitTypeDef;
+
+typedef struct
+{
+ __IO uint32_t PWM_CHn_MR;
+ __IO uint32_t PWM_CHn_LR;
+ __IO uint32_t PWM_CHn_UDMR;
+ __IO uint32_t PWM_CHn_PDMR;
+ __IO uint32_t PWM_CHn_TCMR;
+}PWM_CounterModeInitTypeDef;
+
+
+/**
+ * @brief Random Number generator
+ */
+typedef struct
+{
+ __IO uint32_t RNG_RUN; /* RNG run register, Address offset : 0x000 */
+ __IO uint32_t RNG_SEED; /* RNG seed value register, Address offset : 0x004 */
+ __IO uint32_t RNG_CLKSEL; /* RNG Clock source select register, Address offset : 0x008 */
+ __IO uint32_t RNG_MODE; /* RNG MODE select register, Address offset : 0x00c */
+ __I uint32_t RNG_RN; /* RNG random number value register, Address offset : 0x010 */
+ __IO uint32_t RNG_POLY; /* RNG polynomial register, Address offset : 0x014 */
+}RNG_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+typedef struct
+{
+ __IO uint32_t CR0;
+ __IO uint32_t CR1;
+ __IO uint32_t DR;
+ __IO uint32_t SR;
+ __IO uint32_t CPSR;
+ __IO uint32_t IMSC;
+ __IO uint32_t RIS;
+ __IO uint32_t MIS;
+ __IO uint32_t ICR;
+ __IO uint32_t DMACR;
+} SSP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t WatchdogLoad; // <h> Watchdog Load Register </h>
+ __I uint32_t WatchdogValue; // <h> Watchdog Value Register </h>
+ __IO uint32_t WatchdogControl; // <h> Watchdog Control Register
+ // <o.1> RESEN: Reset enable
+ // <o.0> INTEN: Interrupt enable
+ // </h>
+ __O uint32_t WatchdogIntClr; // <h> Watchdog Clear Interrupt Register </h>
+ __I uint32_t WatchdogRIS; // <h> Watchdog Raw Interrupt Status Register </h>
+ __I uint32_t WatchdogMIS; // <h> Watchdog Interrupt Status Register </h>
+ uint32_t RESERVED[762];
+ __IO uint32_t WatchdogLock; // <h> Watchdog Lock Register </h>
+}WATCHDOG_TypeDef;
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+/* Peripheral and SRAM base address */
+#define W7500x_FLASH_BASE (0x00000000UL) /*!< (FLASH ) Base Address */
+#define W7500x_SRAM_BASE (0x20000000UL) /*!< (SRAM ) Base Address */
+#define W7500x_PERIPH_BASE (0x40000000UL) /*!< (Peripheral) Base Address */
+
+#define W7500x_RAM_BASE (0x20000000UL)
+#define W7500x_APB1_BASE (0x40000000UL)
+#define W7500x_APB2_BASE (0x41000000UL)
+#define W7500x_AHB_BASE (0x42000000UL)
+
+#define W7500x_UART0_BASE (W7500x_APB1_BASE + 0x0000C000UL)
+#define W7500x_UART1_BASE (W7500x_APB1_BASE + 0x0000D000UL)
+#define W7500x_UART2_BASE (W7500x_APB1_BASE + 0x00006000UL)
+
+#define W7500x_CRG_BASE (W7500x_APB2_BASE + 0x00001000UL)
+#define W7500x_ADC_BASE (W7500x_APB2_BASE + 0x00000000UL)
+
+#define W7500x_INFO_BGT (0x0003FDB8)
+#define W7500x_INFO_OSC (0x0003FDBC)
+
+#define W7500x_TRIM_BGT (0x41001210)
+#define W7500x_TRIM_OSC (0x41001004)
+
+#define W7500x_DUALTIMER0_BASE (W7500x_APB1_BASE + 0x00001000ul)
+#define W7500x_DUALTIMER1_BASE (W7500x_APB1_BASE + 0x00002000ul)
+
+#define EXTI_Px_BASE (W7500x_APB2_BASE + 0x00002200UL)
+
+#define GPIOA_BASE (W7500x_AHB_BASE + 0x00000000UL) // W7500x_AHB_BASE : 0x42000000UL
+#define GPIOB_BASE (W7500x_AHB_BASE + 0x01000000UL)
+#define GPIOC_BASE (W7500x_AHB_BASE + 0x02000000UL)
+#define GPIOD_BASE (W7500x_AHB_BASE + 0x03000000UL)
+
+#define P_AFSR_BASE (W7500x_APB2_BASE + 0x00002000UL)
+
+#define P_PCR_BASE (W7500x_APB2_BASE + 0x00003000UL)
+
+#define I2C0_BASE (W7500x_APB1_BASE + 0x8000)
+#define I2C1_BASE (W7500x_APB1_BASE + 0x9000)
+
+#define W7500x_PWM_BASE (W7500x_APB1_BASE + 0x00005000UL)
+
+#define W7500x_RNG_BASE (W7500x_APB1_BASE + 0x00007000UL)
+
+#define SSP0_BASE (0x4000A000)
+#define SSP1_BASE (0x4000B000)
+
+#define W7500x_WATCHDOG_BASE (W7500x_APB1_BASE + 0x0000UL)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define CRG ((CRG_TypeDef *) W7500x_CRG_BASE)
+
+#define UART0 ((UART_TypeDef *) W7500x_UART0_BASE)
+#define UART1 ((UART_TypeDef *) W7500x_UART1_BASE)
+#define UART2 ((S_UART_TypeDef *) W7500x_UART2_BASE)
+
+#define ADC ((ADC_TypeDef *) W7500x_ADC_BASE)
+
+#define DUALTIMER0_0 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER0_BASE) )
+#define DUALTIMER0_1 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER0_BASE + 0x20ul))
+#define DUALTIMER1_0 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER1_BASE) )
+#define DUALTIMER1_1 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER1_BASE + 0x20ul))
+
+#define EXTI_PA ((P_Port_Def *) (EXTI_Px_BASE + 0x00000000UL)) /* PA_XX External interrupt Enable Register */
+#define EXTI_PB ((P_Port_Def *) (EXTI_Px_BASE + 0x00000040UL)) /* PB_XX External interrupt Enable Register */
+#define EXTI_PC ((P_Port_Def *) (EXTI_Px_BASE + 0x00000080UL)) /* PC_XX External interrupt Enable Register */
+#define EXTI_PD ((P_Port_D_Def *) (EXTI_Px_BASE + 0x000000C0UL)) /* PD_XX External interrupt Enable Register */
+
+#define GPIOA ((GPIO_TypeDef *) (GPIOA_BASE) )
+#define GPIOB ((GPIO_TypeDef *) (GPIOB_BASE) )
+#define GPIOC ((GPIO_TypeDef *) (GPIOC_BASE) )
+#define GPIOD ((GPIO_TypeDef *) (GPIOD_BASE) )
+
+#define PA_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000000UL)) /* PA_XX Pad Alternate Function Select Register */
+#define PB_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000040UL)) /* PB_XX Pad Alternate Function Select Register */
+#define PC_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000080UL)) /* PC_XX Pad Alternate Function Select Register */
+#define PD_AFSR ((P_Port_D_Def *) (P_AFSR_BASE + 0x000000C0UL)) /* PD_XX Pad Alternate Function Select Register */
+
+#define PA_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000000UL)) /* PA_XX Pad Control Register */
+#define PB_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000040UL)) /* PB_XX Pad Control Register */
+#define PC_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000080UL)) /* PC_XX Pad Control Register */
+#define PD_PCR ((P_Port_D_Def *) (P_PCR_BASE + 0x000000C0UL)) /* PD_XX Pad Control Register */
+
+#define I2C0 ((I2C_TypeDef *) I2C0_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+
+
+#define TIMCLKEN0_0 *(uint32_t *)(W7500x_DUALTIMER0_BASE + 0x80ul)
+#define TIMCLKEN0_1 *(uint32_t *)(W7500x_DUALTIMER0_BASE + 0xA0ul)
+#define TIMCLKEN1_0 *(uint32_t *)(W7500x_DUALTIMER1_BASE + 0x80ul)
+#define TIMCLKEN1_1 *(uint32_t *)(W7500x_DUALTIMER1_BASE + 0xA0ul)
+
+#define PWM ((PWM_TypeDef *) (W7500x_PWM_BASE + 0x800UL ))
+#define PWM_CH0 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE))
+#define PWM_CH1 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x100UL))
+#define PWM_CH2 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x200UL))
+#define PWM_CH3 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x300UL))
+#define PWM_CH4 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x400UL))
+#define PWM_CH5 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x500UL))
+#define PWM_CH6 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x600UL))
+#define PWM_CH7 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x700UL))
+
+#define PWM_CH0_BASE (W7500x_PWM_BASE)
+#define PWM_CH1_BASE (W7500x_PWM_BASE + 0x100UL)
+#define PWM_CH2_BASE (W7500x_PWM_BASE + 0x200UL)
+#define PWM_CH3_BASE (W7500x_PWM_BASE + 0x300UL)
+#define PWM_CH4_BASE (W7500x_PWM_BASE + 0x400UL)
+#define PWM_CH5_BASE (W7500x_PWM_BASE + 0x500UL)
+#define PWM_CH6_BASE (W7500x_PWM_BASE + 0x600UL)
+#define PWM_CH7_BASE (W7500x_PWM_BASE + 0x700UL)
+
+#define RNG ((RNG_TypeDef *) W7500x_RNG_BASE)
+
+#define SSP0 ((SSP_TypeDef*) (SSP0_BASE))
+#define SSP1 ((SSP_TypeDef*) (SSP1_BASE))
+
+#define WATCHDOG ((WATCHDOG_TypeDef *) W7500x_WATCHDOG_BASE)
+
+/**
+ * @}
+ */
+
+
+
+/******************************************************************************/
+/* */
+/* Clock Reset Generator */
+/* */
+/******************************************************************************/
+/**************** Bit definition for CRG_OSC_PDR **************************/
+#define CRG_OSC_PDR_NRMLOP (0x0ul) // Normal Operation
+#define CRG_OSC_PDR_PD (0x1ul) // Power Down
+/**************** Bit definition for CRG_PLL_PDR **************************/
+#define CRG_PLL_PDR_PD (0x0ul) // Power Down
+#define CRG_PLL_PDR_NRMLOP (0x1ul) // Normal Operation
+/**************** Bit definition for CRG_PLL_FCR **************************/
+//ToDo
+/**************** Bit definition for CRG_PLL_OER **************************/
+#define CRG_PLL_OER_DIS (0x0ul) // Clock out is disable
+#define CRG_PLL_OER_EN (0x1ul) // Clock out is enable
+/**************** Bit definition for CRG_PLL_BPR **************************/
+#define CRG_PLL_BPR_DIS (0x0ul) // Bypass disable. Normal operation
+#define CRG_PLL_BPR_EN (0x1ul) // Bypass enable. Clock will be set to external clock
+/**************** Bit definition for CRG_PLL_IFSR **************************/
+#define CRG_PLL_IFSR_RCLK (0x0ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_PLL_IFSR_OCLK (0x1ul) // External oscillator clock (OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_FCLK_SSR **************************/
+#define CRG_FCLK_SSR_MCLK (0x01ul) // 00,01 Output clock of PLL(MCLK)
+#define CRG_FCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_FCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_FCLK_PVSR **************************/
+#define CRG_FCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_FCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_FCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_FCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_SSPCLK_SSR **************************/
+#define CRG_SSPCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_SSPCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_SSPCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_SSPCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_SSPCLK_PVSR **************************/
+#define CRG_SSPCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_SSPCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_SSPCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_SSPCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_ADCCLK_SSR **************************/
+#define CRG_ADCCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_ADCCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_ADCCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_ADCCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_ADCCLK_PVSR **************************/
+#define CRG_ADCCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_ADCCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_ADCCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_ADCCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_TIMER0/1CLK_SSR **************************/
+#define CRG_TIMERCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_TIMERCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_TIMERCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_TIMERCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_TIMER0/1CLK_PVSR **************************/
+#define CRG_TIMERCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_TIMERCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_TIMERCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_TIMERCLK_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_TIMERCLK_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_TIMERCLK_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_TIMERCLK_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_TIMERCLK_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_PWMnCLK_SSR **************************/
+#define CRG_PWMCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_PWMCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_PWMCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_PWMCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_PWMnCLK_PVSR **************************/
+#define CRG_PWMCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_PWMCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_PWMCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_PWMCLK_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_PWMCLK_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_PWMCLK_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_PWMCLK_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_PWMCLK_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_RTC_HS_SSR **************************/
+#define CRG_RTC_HS_SSR_DIS (0x00ul) // Disable clock
+#define CRG_RTC_HS_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_RTC_HS_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_RTC_HS_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_RTC_HS_PVSR **************************/
+#define CRG_RTC_HS_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_RTC_HS_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_RTC_HS_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_RTC_HS_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_RTC_HS_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_RTC_HS_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_RTC_HS_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_RTC_HS_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_RTC_SSR **************************/
+#define CRG_RTC_SSR_HS (0x00ul) // RTCCLK HS(High Speed clock)
+#define CRG_RTC_SSR_LW (0x01ul) // 32K_OSC_CLK(Low Speed external oscillator clock)
+/**************** Bit definition for CRG_WDOGCLK_HS_SSR **************************/
+#define CRG_WDOGCLK_HS_SSR_DIS (0x00ul) // Disable clock
+#define CRG_WDOGCLK_HS_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_WDOGCLK_HS_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_WDOGCLK_HS_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_WDOGCLK_HS_PVSR **************************/
+#define CRG_WDOGCLK_HS_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_WDOGCLK_HS_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_WDOGCLK_HS_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_WDOGCLK_HS_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_WDOGCLK_HS_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_WDOGCLK_HS_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_WDOGCLK_HS_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_WDOGCLK_HS_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_WDOGCLK_SSR **************************/
+#define CRG_WDOGCLK_SSR_HS (0x00ul) // RTCCLK HS(High Speed clock)
+#define CRG_WDOGCLK_SSR_LW (0x01ul) // 32K_OSC_CLK(Low Speed external oscillator clock)
+/**************** Bit definition for CRG_UARTCLK_SSR **************************/
+#define CRG_UARTCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_UARTCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_UARTCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_UARTCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_UARTCLK_PVSR **************************/
+#define CRG_UARTCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_UARTCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_UARTCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_UARTCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_MIICLK_ECR **************************/
+#define CRG_MIICLK_ECR_EN_RXCLK (0x01ul << 0) // Enable MII_RCK and MII_RCK_N
+#define CRG_MIICLK_ECR_EN_TXCLK (0x01ul << 1) // Enable MII_TCK and MII_TCK_N
+/**************** Bit definition for CRG_MONCLK_SSR **************************/
+#define CRG_MONCLK_SSR_MCLK (0x00ul) // PLL output clock (MCLK)
+#define CRG_MONCLK_SSR_FCLK (0x01ul) // FCLK
+#define CRG_MONCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_MONCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+#define CRG_MONCLK_SSR_ADCCLK (0x04ul) // ADCCLK
+#define CRG_MONCLK_SSR_SSPCLK (0x05ul) // SSPCLK
+#define CRG_MONCLK_SSR_TIMCLK0 (0x06ul) // TIMCLK0
+#define CRG_MONCLK_SSR_TIMCLK1 (0x07ul) // TIMCLK1
+#define CRG_MONCLK_SSR_PWMCLK0 (0x08ul) // PWMCLK0
+#define CRG_MONCLK_SSR_PWMCLK1 (0x09ul) // PWMCLK1
+#define CRG_MONCLK_SSR_PWMCLK2 (0x0Aul) // PWMCLK2
+#define CRG_MONCLK_SSR_PWMCLK3 (0x0Bul) // PWMCLK3
+#define CRG_MONCLK_SSR_PWMCLK4 (0x0Cul) // PWMCLK4
+#define CRG_MONCLK_SSR_PWMCLK5 (0x0Dul) // PWMCLK5
+#define CRG_MONCLK_SSR_PWMCLK6 (0x0Eul) // PWMCLK6
+#define CRG_MONCLK_SSR_PWMCLK7 (0x0Ful) // PWMCLK7
+#define CRG_MONCLK_SSR_UARTCLK (0x10ul) // UARTCLK
+#define CRG_MONCLK_SSR_MII_RXCLK (0x11ul) // MII_RXCLK
+#define CRG_MONCLK_SSR_MII_TXCLK (0x12ul) // MII_TXCLK
+#define CRG_MONCLK_SSR_RTCCLK (0x13ul) // RTCCLK
+
+/******************************************************************************/
+/* */
+/* UART */
+/* */
+/******************************************************************************/
+/****************** Bit definition for UART Data(UARTDR) register *************************/
+#define UART_DR_OE (0x01ul << 11) // Overrun Error
+#define UART_DR_BE (0x01ul << 10) // Break Error
+#define UART_DR_PE (0x01ul << 9) // Parity Error
+#define UART_DR_FE (0x01ul << 8) // Framing Error
+//#define UART_DR_DR // ToDo
+/***************** Bit definition for UART Receive Status(UARTRSR) register ***************/
+#define UARTR_SR_OE (0x01ul << 3) // Overrun Error
+#define UARTR_SR_BE (0x01ul << 2) // Break Error
+#define UARTR_SR_PE (0x01ul << 1) // Parity Error
+#define UARTR_SR_FE (0x01ul << 0) // Framing Error
+/***************** Bit definition for UART Error Clear(UARTECR) register ******************/
+#define UARTE_CR_OE (0x01ul << 3) // Overrun Error
+#define UARTE_CR_BE (0x01ul << 2) // Break Error
+#define UARTE_CR_PE (0x01ul << 1) // Parity Error
+#define UARTE_CR_FE (0x01ul << 0) // Framing Error
+/****************** Bit definition for UART Flags(UARTFR) register ************************/
+#define UART_FR_RI (0x01ul << 8) // Ring indicator
+#define UART_FR_TXFE (0x01ul << 7) // Transmit FIFO empty
+#define UART_FR_RXFF (0x01ul << 6) // Receive FIFO full
+#define UART_FR_TXFF (0x01ul << 5) // Transmit FIFO full
+#define UART_FR_RXFE (0x01ul << 4) // Receive FIFO empty
+#define UART_FR_BUSY (0x01ul << 3) // UART busy
+#define UART_FR_DCD (0x01ul << 2) // Data carrier detect
+#define UART_FR_DSR (0x01ul << 1) // Data set ready
+#define UART_FR_CTS (0x01ul << 0) // Clear to send
+/********** Bit definition for UART Low-power Counter(UARTILPR) register *******************/
+#define UARTILPR_COUNTER (0xFFul << 0) // 8-bit low-power divisor value (0..255)
+/********************* Bit definition for Line Control(UARTLCR_H) register *****************/
+#define UART_LCR_H_SPS (0x1ul << 7) // Stick parity select
+#define UART_LCR_H_WLEN(n) ((n & 0x3ul) << 5) // Word length ( 0=5bits, 1=6bits, 2=7bits, 3=8bits )
+#define UART_LCR_H_FEN (0x1ul << 4) // Enable FIFOs
+#define UART_LCR_H_STP2 (0x1ul << 3) // Two stop bits select
+#define UART_LCR_H_EPS (0x1ul << 2) // Even parity select
+#define UART_LCR_H_PEN (0x1ul << 1) // Parity enable
+#define UART_LCR_H_BRK (0x1ul << 0) // Send break
+/********************* Bit definition for Contro(UARTCR) register *************************/
+#define UART_CR_CTSEn (0x1ul << 15) // CTS hardware flow control enable
+#define UART_CR_RTSEn (0x1ul << 14) // RTS hardware flow control enable
+#define UART_CR_Out2 (0x1ul << 13) // Complement of Out2 modem status output
+#define UART_CR_Out1 (0x1ul << 12) // Complement of Out1 modem status output
+#define UART_CR_RTS (0x1ul << 11) // Request to send
+#define UART_CR_DTR (0x1ul << 10) // Data transmit ready
+#define UART_CR_RXE (0x1ul << 9) // Receive enable
+#define UART_CR_TXE (0x1ul << 8) // Transmit enable
+#define UART_CR_LBE (0x1ul << 7) // Loop-back enable
+#define UART_CR_SIRLP (0x1ul << 2) // IrDA SIR low power mode
+#define UART_CR_SIREN (0x1ul << 1) // SIR enable
+#define UART_CR_UARTEN (0x1ul << 0) // UART enable
+/******* Bit definition for Interrupt FIFO Level Select(UARTIFLS) register *****************/
+#define UART_IFLS_RXIFLSEL(n) ((n & 0x7ul) << 3) // Receive interrupt FIFO level select(0=1/8 full, 1=1/4 full, 2=1/2 full, 3=3/4 full, 4=7/8 full)
+#define UART_IFLS_TXIFLSEL(n) ((n & 0x7ul) << 0) // Transmit interrupt FIFO level select(0=1/8 full, 1=1/4 full, 2=1/2 full, 3=3/4 full, 4=7/8 full)
+/******* Bit definition for Interrupt Mask Set/Clear(UARTIMSC) register ********************/
+#define UART_IMSC_OEIM (0x1ul << 10) // Overrun error interrupt mask
+#define UART_IMSC_BEIM (0x1ul << 9) // Break error interrupt mask
+#define UART_IMSC_PEIM (0x1ul << 8) // Parity error interrupt mask
+#define UART_IMSC_FEIM (0x1ul << 7) // Framing error interrupt mask
+#define UART_IMSC_RTIM (0x1ul << 6) // Receive interrupt mask
+#define UART_IMSC_TXIM (0x1ul << 5) // Transmit interrupt mask
+#define UART_IMSC_RXIM (0x1ul << 4) // Receive interrupt mask
+#define UART_IMSC_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt mask
+#define UART_IMSC_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt mask
+#define UART_IMSC_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt mask
+#define UART_IMSC_RIMIM (0x1ul << 0) // nUARTRI modem interrupt mask
+/*************** Bit definition for Raw Interrupt Status(UARTRIS) register *****************/
+#define UART_RIS_OEIM (0x1ul << 10) // Overrun error interrupt status
+#define UART_RIS_BEIM (0x1ul << 9) // Break error interrupt status
+#define UART_RIS_PEIM (0x1ul << 8) // Parity error interrupt status
+#define UART_RIS_FEIM (0x1ul << 7) // Framing error interrupt status
+#define UART_RIS_RTIM (0x1ul << 6) // Receive interrupt status
+#define UART_RIS_TXIM (0x1ul << 5) // Transmit interrupt status
+#define UART_RIS_RXIM (0x1ul << 4) // Receive interrupt status
+#define UART_RIS_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt status
+#define UART_RIS_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt status
+#define UART_RIS_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt status
+#define UART_RIS_RIMIM (0x1ul << 0) // nUARTRI modem interrupt status
+/************** Bit definition for Masked Interrupt Status(UARTMIS) register ****************/
+#define UART_MIS_OEIM (0x1ul << 10) // Overrun error masked interrupt status
+#define UART_MIS_BEIM (0x1ul << 9) // Break error masked interrupt status
+#define UART_MIS_PEIM (0x1ul << 8) // Parity error masked interrupt status
+#define UART_MIS_FEIM (0x1ul << 7) // Framing error masked interrupt status
+#define UART_MIS_RTIM (0x1ul << 6) // Receive masked interrupt status
+#define UART_MIS_TXIM (0x1ul << 5) // Transmit masked interrupt status
+#define UART_MIS_RXIM (0x1ul << 4) // Receive masked interrupt status
+#define UART_MIS_DSRMIM (0x1ul << 3) // nUARTDSR modem masked interrupt status
+#define UART_MIS_DCDMIM (0x1ul << 2) // nUARTDCD modem masked interrupt status
+#define UART_MIS_CTSMIM (0x1ul << 1) // nUARTCTS modem masked interrupt status
+#define UART_MIS_RIMIM (0x1ul << 0) // nUARTRI modem masked interrupt status
+/*************** Bit definition for Interrupt Clear(UARTICR) register ************************/
+#define UART_ICR_OEIM (0x1ul << 10) // Overrun error interrupt clear
+#define UART_ICR_BEIM (0x1ul << 9) // Break error interrupt clear
+#define UART_ICR_PEIM (0x1ul << 8) // Parity error interrupt clear
+#define UART_ICR_FEIM (0x1ul << 7) // Framing error interrupt clear
+#define UART_ICR_RTIM (0x1ul << 6) // Receive interrupt clear
+#define UART_ICR_TXIM (0x1ul << 5) // Transmit interrupt clear
+#define UART_ICR_RXIM (0x1ul << 4) // Receive interrupt clear
+#define UART_ICR_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt clear
+#define UART_ICR_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt clear
+#define UART_ICR_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt clear
+#define UART_ICR_RIMIM (0x1ul << 0) // nUARTRI modem interrupt clear
+/***************** Bit definition for DMA Control(UARTDMACR) register ************************/
+#define UART_DMACR_DMAONERR (0x1ul << 2) // DMA on error
+#define UART_DMACR_TXDMAE (0x1ul << 1) // Transmit DMA enable
+#define UART_DMACR_RXDMAE (0x1ul << 0) // Receive DMA enable
+
+/******************************************************************************/
+/* */
+/* Simple UART */
+/* */
+/******************************************************************************/
+/***************** Bit definition for S_UART Data () register ************************/
+#define S_UART_DATA (0xFFul << 0)
+/***************** Bit definition for S_UART State() register ************************/
+#define S_UART_STATE_TX_BUF_OVERRUN (0x01ul << 2) // TX buffer overrun, wirte 1 to clear.
+#define S_UART_STATE_RX_BUF_FULL (0x01ul << 1) // RX buffer full, read only.
+#define S_UART_STATE_TX_BUF_FULL (0x01ul << 0) // TX buffer full, read only.
+/***************** Bit definition for S_UART Control() register ************************/
+#define S_UART_CTRL_HIGH_SPEED_TEST (0x01ul << 6) // High-speed test mode for TX only.
+#define S_UART_CTRL_RX_OVERRUN_EN (0x01ul << 5) // RX overrun interrupt enable.
+#define S_UART_CTRL_TX_OVERRUN_EN (0x01ul << 4) // TX overrun interrupt enable.
+#define S_UART_CTRL_RX_INT_EN (0x01ul << 3) // RX interrupt enable.
+#define S_UART_CTRL_TX_INT_EN (0x01ul << 2) // TX interrupt enable.
+#define S_UART_CTRL_RX_EN (0x01ul << 1) // RX enable.
+#define S_UART_CTRL_TX_EN (0x01ul << 0) // TX enable.
+/***************** Bit definition for S_UART Interrupt() register ************************/
+#define S_UART_INT_RX_OVERRUN (0x01ul << 3) // RX overrun interrupt. Wirte 1 to clear
+#define S_UART_INT_TX_OVERRUN (0x01ul << 2) // TX overrun interrupt. Write 1 to clear
+#define S_UART_INT_RX (0x01ul << 1) // RX interrupt. Write 1 to clear
+#define S_UART_INT_TX (0x01ul << 0) // TX interrupt. Write 1 to clear
+
+/******************************************************************************/
+/* */
+/* Analog Digital Register */
+/* */
+/******************************************************************************/
+
+/*********************** Bit definition for ADC_CTR ***********************/
+//#define ADC_CTR_SAMSEL_ABNORMAL (0x0ul) // Abnormal Operation
+//#define ADC_CTR_SAMSEL_NORMAL (0x1ul) // Normal Operation
+#define ADC_CTR_PWD_NRMOP (0x1ul) // Active Operation
+#define ADC_CTR_PWD_PD (0x3ul) // Power down
+/*********************** Bit definition for ADC_CHSEL ***********************/
+#define ADC_CHSEL_CH0 (0x0ul) // Channel 0
+#define ADC_CHSEL_CH1 (0x1ul) // Channel 1
+#define ADC_CHSEL_CH2 (0x2ul) // Channel 2
+#define ADC_CHSEL_CH3 (0x3ul) // Channel 3
+#define ADC_CHSEL_CH4 (0x4ul) // Channel 4
+#define ADC_CHSEL_CH5 (0x5ul) // Channel 5
+#define ADC_CHSEL_CH6 (0x6ul) // Channel 6
+#define ADC_CHSEL_CH7 (0x7ul) // Channel 7
+#define ADC_CHSEL_CH15 (0xful) // LDO output(1.5V)
+/*********************** Bit definition for ADC_START ***********************/
+#define ADC_START_START (0x1ul) // ADC conversion start
+/*********************** Bit definition for ADC_DATA ***********************/
+//ToDo (Readonly)
+
+/*********************** Bit definition for ADC_INT ***********************/
+#define ADC_INT_MASK_DIS (0x0ul << 1) // Interrupt disable
+#define ADC_INT_MASK_ENA (0x1ul << 1) // Interrupt enable
+//ToDo (Readonly)
+
+/*********************** Bit definition for ADC_INTCLR ***********************/
+#define ADC_INTCLEAR (0x1ul) // ADC Interrupt clear
+
+#define W7500x_ADC_BASE (W7500x_APB2_BASE + 0x00000000UL)
+#define ADC ((ADC_TypeDef *) W7500x_ADC_BASE)
+
+/******************************************************************************/
+/* */
+/* Dual Timer */
+/* */
+/******************************************************************************/
+
+/*********************** Bit definition for dualtimer ***********************/
+#define DUALTIMER_TimerControl_TimerDIsable 0x0ul
+#define DUALTIMER_TimerControl_TimerEnable 0x1ul
+#define DUALTIMER_TimerControl_TimerEnable_Pos 7
+
+#define DUALTIMER_TimerControl_FreeRunning 0x0ul
+#define DUALTIMER_TimerControl_Periodic 0x1ul
+#define DUALTIMER_TimerControl_TimerMode_Pos 6
+
+#define DUALTIMER_TimerControl_IntDisable 0x0ul
+#define DUALTIMER_TimerControl_IntEnable 0x1ul
+#define DUALTIMER_TimerControl_IntEnable_Pos 5
+
+#define DUALTIMER_TimerControl_Pre_1 0x0ul
+#define DUALTIMER_TimerControl_Pre_16 0x1ul
+#define DUALTIMER_TimerControl_Pre_256 0x2ul
+#define DUALTIMER_TimerControl_Pre_Pos 2
+
+#define DUALTIMER_TimerControl_Size_16 0x0ul
+#define DUALTIMER_TimerControl_Size_32 0x1ul
+#define DUALTIMER_TimerControl_Size_Pos 1
+
+#define DUALTIMER_TimerControl_Wrapping 0x0ul
+#define DUALTIMER_TimerControl_OneShot 0x1ul
+#define DUALTIMER_TimerControl_OneShot_Pos 0
+
+/******************************************************************************/
+/* */
+/* External Interrupt */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for Px_IER **************************/
+#define EXTI_Px_INTPOR_RISING_EDGE (0x00ul << 0)
+#define EXTI_Px_INTPOR_FALLING_EDGE (0x01ul << 0)
+#define EXTI_Px_INTEN_DISABLE (0x00ul << 1)
+#define EXTI_Px_INTEN_ENABLE (0x01ul << 1)
+
+/******************************************************************************/
+/* */
+/* GPIO */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for Px_AFSR **************************/
+#define Px_AFSR_AF0 (0x00ul)
+#define Px_AFSR_AF1 (0x01ul)
+#define Px_AFSR_AF2 (0x02ul)
+#define Px_AFSR_AF3 (0x03ul)
+/**************** Bit definition for Px_PCR **************************/
+#define Px_PCR_PUPD_DOWN (0x01ul << 0) // Pull Down
+#define Px_PCR_PUPD_UP (0x01ul << 1) // Pull Up
+#define Px_PCR_DS_HIGH (0x01ul << 2) // High Driving
+#define Px_PCR_OD (0x01ul << 3) // Open Drain
+#define Px_PCR_IE (0x01ul << 5) // Input Buffer Enable
+#define Px_PCR_CS_SUMMIT (0x01ul << 6) // Use Summit Trigger Input Buffer
+
+/******************************************************************************/
+/* */
+/* I2C */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for I2C_CTR **************************/
+#define I2C_CTR_COREEN (0x01ul << 7 ) // 0x80
+#define I2C_CTR_INTEREN (0x01ul << 6 ) // 0x40
+#define I2C_CTR_MODE (0x01ul << 5 ) // 0x20
+#define I2C_CTR_ADDR10 (0x01ul << 4 ) // 0x10
+#define I2C_CTR_CTRRWN (0x01ul << 3 ) // 0x08
+#define I2C_CTR_CTEN (0x01ul << 2 ) // 0x04
+
+/**************** Bit definition for I2C_CMDR **************************/
+#define I2C_CMDR_STA (0x01ul << 7 ) // 0x80
+#define I2C_CMDR_STO (0x01ul << 6 ) // 0x40
+#define I2C_CMDR_ACK (0x01ul << 5 ) // 0x20
+#define I2C_CMDR_RESTA (0x01ul << 4 ) // 0x10
+
+/**************** Bit definition for I2C_ISCR **************************/
+#define I2C_ISCR_RST (0x01ul << 1) // 0x01
+
+/**************** Bit definition for I2C_SR **************************/
+#define I2C_SR_TX (0x01ul << 9 ) // 0x200
+#define I2C_SR_RX (0x01ul << 8 ) // 0x100
+#define I2C_SR_ACKT (0x01ul << 7 ) // 0x080
+#define I2C_SR_BT (0x01ul << 6 ) // 0x040
+#define I2C_SR_SA (0x01ul << 5 ) // 0x020
+#define I2C_SR_SB (0x01ul << 4 ) // 0x010
+#define I2C_SR_AL (0x01ul << 3 ) // 0x008
+#define I2C_SR_TO (0x01ul << 2 ) // 0x004
+#define I2C_SR_SRW (0x01ul << 1 ) // 0x002
+#define I2C_SR_ACKR (0x01ul << 0 ) // 0x001
+
+/**************** Bit definition for I2C_ISR **************************/
+#define I2C_ISR_STAE (0x01ul << 4 ) // 0x010
+#define I2C_ISR_STOE (0x01ul << 3 ) // 0x008
+#define I2C_ISR_TOE (0x01ul << 2 ) // 0x004
+#define I2C_ISR_ACK_RXE (0x01ul << 1 ) // 0x002
+#define I2C_ISR_ACK_TXE (0x01ul << 0 ) // 0x001
+
+/**************** Bit definition for I2C_ISMR **************************/
+#define I2C_ISR_STAEM (0x01ul << 4 ) // 0x010
+#define I2C_ISR_STOEM (0x01ul << 3 ) // 0x008
+#define I2C_ISR_TOEM (0x01ul << 2 ) // 0x004
+#define I2C_ISR_ACK_RXEM (0x01ul << 1 ) // 0x002
+#define I2C_ISR_ACK_TXEM (0x01ul << 0 ) // 0x001
+
+/******************************************************************************/
+/* */
+/* PWM */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Random number generator Register */
+/* */
+/******************************************************************************/
+
+/*********************** Bit definition for RNG_RUN ***********************/
+#define RNG_RUN_STOP (0x0ul) // STOP RNG shift register
+#define RNG_RUN_RUN (0x1ul) // RUN RNG shift register
+/*********************** Bit definition for RNG_SEED ***********************/
+//ToDo
+
+/*********************** Bit definition for RNG_CLKSEL ***********************/
+#define RNG_CLKSEL_RNGCLK (0x0ul) // RNGCLK is source clock for rng shift register
+#define RNG_CLKSEL_APBCLK (0x1ul) // APBCLK is source clock for rng shift register
+/*********************** Bit definition for RNG_ENABLE ***********************/
+#define RNG_MANUAL_DISABLE (0x0ul) // RNG disble
+#define RNG_MANUAL_ENABLE (0x1ul) // RNG enable
+/*********************** Bit definition for RNG_RN ***********************/
+//ToDo
+
+/*********************** Bit definition for RNG_POLY ***********************/
+//ToDo
+
+
+
+typedef enum
+{
+ PAD_PA = 0,
+ PAD_PB,
+ PAD_PC,
+ PAD_PD
+}PAD_Type;
+
+typedef enum
+{
+ PAD_AF0 = Px_AFSR_AF0,
+ PAD_AF1 = Px_AFSR_AF1,
+ PAD_AF2 = Px_AFSR_AF2,
+ PAD_AF3 = Px_AFSR_AF3
+}PAD_AF_TypeDef;
+
+
+#if !defined (USE_HAL_DRIVER)
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+
+
+#if defined (USE_HAL_DRIVER)
+// #include "system_W7500x.h"
+// #include "W7500x_conf.h"
+#endif
+
+#ifdef USE_FULL_ASSERT
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__,__LINE__))
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* W7500x_H */
+
+
+
+/************************ (C) COPYRIGHT Wiznet *****END OF FILE****/