Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/ncs36510_spi.c

Revision:

149:156823d33999

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/ncs36510_spi.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,171 @@
+/**
+ ******************************************************************************
+ * @file spi.c
+ * @brief Implementation of a IPC 7207 SPI master driver
+ * @internal
+ * @author ON Semiconductor
+ * @version $Rev:  $
+ * @date $Date: 2016-02-05 $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup spi
+ *
+ * @details
+ *
+ */
+#if DEVICE_SPI
+
+#include "spi.h"
+#include "clock.h"
+#include "objects.h"
+#include "spi_api.h"
+#include "PeripheralPins.h"
+#include "spi_ipc7207_map.h"
+#include "crossbar.h"
+#include "pad.h"
+#include "mbed_assert.h"
+
+/** Initializes a spi device.
+ * @details
+ *
+ * @param obj A spi device instance.
+ * @param mosi pin to used as SPI MOSI
+ * @param miso pin to used as SPI MISO
+ * @param sclk pin to used as SPI SCLK
+ * @return None
+ */
+void fSpiInit(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+    uint32_t clockDivisor;
+
+    /* determine the SPI to use */
+    SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+    SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+    SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+    SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+    SPIName spi_data_1 = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+    SPIName spi_data_2 = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+    obj->membase      = (SpiIpc7207Reg_pt)pinmap_merge(spi_data_1, spi_data_2);
+    MBED_ASSERT((int)obj->membase != NC);
+
+    /* Check device to be activated */
+    if(obj->membase == SPI1REG) {
+        /* SPI 1 selected */
+        CLOCK_ENABLE(CLOCK_SPI);         /* Enable clock */
+    } else {
+        /* SPI 2 selected */
+        CLOCK_ENABLE(CLOCK_SPI2);        /* Enable clock */
+    }
+
+    CLOCK_ENABLE(CLOCK_CROSSB);
+    /* Cross bar setting: Map GPIOs to SPI */
+    pinmap_pinout(sclk, PinMap_SPI_SCLK);
+    pinmap_pinout(mosi, PinMap_SPI_MOSI);
+
+    /* Configure GPIO Direction  */
+    CLOCK_ENABLE(CLOCK_GPIO);
+    GPIOREG->W_OUT |= ((True << sclk) | (True << mosi) | (True << ssel));    /* Set pins as output */
+    GPIOREG->W_IN  |= (True << miso);    /* Set pin as input */
+
+    /* Pad settings */
+    CLOCK_ENABLE(CLOCK_PAD);
+    pin_mode(sclk, PushPullPullDown);
+    pin_mode(mosi, PushPullPullDown);
+
+    /* PAD drive strength */
+    PadReg_t *padRegOffset = (PadReg_t*)(PADREG_BASE + (sclk * PAD_REG_ADRS_BYTE_SIZE));
+    padRegOffset->PADIO0.BITS.POWER = True; /* sclk: Drive strength */
+    padRegOffset->PADIO1.BITS.POWER = True; /* mosi: Drive strength */
+    if(miso != NC) {
+        pinmap_pinout(miso, PinMap_SPI_MISO); /* Cross bar settings */
+        pin_mode(miso, OpenDrainNoPull);      /* Pad setting */
+        padRegOffset->PADIO2.BITS.POWER = True;  /* miso: Drive strength */
+    }
+    if(ssel != NC) {
+        pinmap_pinout(ssel, PinMap_SPI_SSEL);         /* Cross bar settings */
+        pin_mode(ssel, PushPullPullUp);               /* Pad setting */
+        padRegOffset->PADIO3.BITS.POWER      = True;      /* ssel: Drive strength */
+        SPI1REG->SLAVE_SELECT.BITS.SS_ENABLE = SPI_SLAVE_SELECT_NORM_BEHAVE; /* Slave select: Normal behavior */
+    }
+    CLOCK_DISABLE(CLOCK_PAD);
+    CLOCK_DISABLE(CLOCK_GPIO);
+    CLOCK_DISABLE(CLOCK_CROSSB);
+
+    /* disable/reset the spi port: Clear control register*/
+    obj->membase->CONTROL.WORD = False;
+
+    /* set default baud rate to 1MHz */
+    clockDivisor         = ((fClockGetPeriphClockfrequency() / SPI_DEFAULT_SPEED) >> True) - True;
+    obj->membase->FDIV   = clockDivisor;
+
+    /* set tx/rx fifos watermarks */ /* TODO water mark level 1 byte ?*/
+    obj->membase->TX_WATERMARK = True;
+    obj->membase->RX_WATERMARK = True;
+
+    /* DIsable and clear IRQs */ /* TODO sync api, do not need irq ?*/
+    obj->membase->IRQ_ENABLE = False;
+    obj->membase->IRQ_CLEAR  = SPI_BYTE_MASK; /* Clear all */
+
+    /* configure slave select */
+    obj->membase->SLAVE_SELECT.WORD = SPI_SLAVE_SELECT_DEFAULT;
+    obj->membase->SLAVE_SELECT_POLARITY = False;
+
+    /* Configure control register parameters: 8 bits, master, CPOL = 0, Idle low. CPHA = 0, First transmit occurs before first edge of SCLK. MSB first. Sample incoming data on opposite edge of SCLK from when outgoing data is driven. enable the spi port */
+    obj->membase->CONTROL.WORD = SPI_DEFAULT_CONFIG;
+}
+
+/** Close a spi device.
+ * @details
+ *
+ * @param obj The spi device to close.
+ * @return None
+ */
+void fSpiClose(spi_t *obj)
+{
+    /* disable the spi port */
+    obj->membase->CONTROL.BITS.ENABLE = False;
+
+    /* disable interruption associated with spi */
+    NVIC_DisableIRQ(obj->irq);
+}
+
+/**
+ * Write data to an SPI device.
+ * The data is written from the buffer into the transmit register.
+ * This function blocks untill write and read happens.
+ *
+ * @param obj The device to write to.
+ * @param buf The buffer to write from (the contents of the buffer may not be modified).
+ * @return the value received during send
+ */
+int fSpiWriteB(spi_t *obj, uint32_t const buf)
+{
+    int byte;
+
+    while((obj->membase->STATUS.BITS.TX_FULL == True) && (obj->membase->STATUS.BITS.RX_FULL == True)); /* Wait till Tx/Rx status is full */
+    obj->membase->TX_DATA = buf;
+
+    while (obj->membase->STATUS.BITS.RX_EMPTY == True); /* Wait till Receive status is empty */
+    byte = obj->membase->RX_DATA;
+    return byte;
+}
+
+#endif /* DEVICE_SPI */
\ No newline at end of file