Ram Gandikota
FRDM K64F Metronome
Diff: pal/Test/Unity/README.md
- Revision:
- 0:dbad57390bd1
diff -r 000000000000 -r dbad57390bd1 pal/Test/Unity/README.md
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pal/Test/Unity/README.md Sun May 14 18:37:05 2017 +0000
@@ -0,0 +1,211 @@
+Unity Test API
+==============
+
+[](https://travis-ci.org/ThrowTheSwitch/Unity)
+__Copyright (c) 2007 - 2014 Unity Project by Mike Karlesky, Mark VanderVoord, and Greg Williams__
+
+Running Tests
+-------------
+
+ RUN_TEST(func, linenum)
+
+Each Test is run within the macro `RUN_TEST`. This macro performs necessary setup before the test is called and handles cleanup and result tabulation afterwards.
+
+Ignoring Tests
+--------------
+
+There are times when a test is incomplete or not valid for some reason. At these times, TEST_IGNORE can be called. Control will immediately be returned to the caller of the test, and no failures will be returned.
+
+ TEST_IGNORE()
+
+Ignore this test and return immediately
+
+ TEST_IGNORE_MESSAGE (message)
+
+Ignore this test and return immediately. Output a message stating why the test was ignored.
+
+Aborting Tests
+--------------
+
+There are times when a test will contain an infinite loop on error conditions, or there may be reason to escape from the test early without executing the rest of the test. A pair of macros support this functionality in Unity. The first `TEST_PROTECT` sets up the feature, and handles emergency abort cases. `TEST_ABORT` can then be used at any time within the tests to return to the last `TEST_PROTECT` call.
+
+ TEST_PROTECT()
+
+Setup and Catch macro
+
+ TEST_ABORT()
+
+Abort Test macro
+
+Example:
+
+ main()
+ {
+ if (TEST_PROTECT() == 0)
+ {
+ MyTest();
+ }
+ }
+
+If MyTest calls `TEST_ABORT`, program control will immediately return to `TEST_PROTECT` with a non-zero return value.
+
+
+Unity Assertion Summary
+=======================
+
+Basic Validity Tests
+--------------------
+
+ TEST_ASSERT_TRUE(condition)
+
+Evaluates whatever code is in condition and fails if it evaluates to false
+
+ TEST_ASSERT_FALSE(condition)
+
+Evaluates whatever code is in condition and fails if it evaluates to true
+
+ TEST_ASSERT(condition)
+
+Another way of calling `TEST_ASSERT_TRUE`
+
+ TEST_ASSERT_UNLESS(condition)
+
+Another way of calling `TEST_ASSERT_FALSE`
+
+ TEST_FAIL()
+ TEST_FAIL_MESSAGE(message)
+
+This test is automatically marked as a failure. The message is output stating why.
+
+Numerical Assertions: Integers
+------------------------------
+
+ TEST_ASSERT_EQUAL_INT(expected, actual)
+ TEST_ASSERT_EQUAL_INT8(expected, actual)
+ TEST_ASSERT_EQUAL_INT16(expected, actual)
+ TEST_ASSERT_EQUAL_INT32(expected, actual)
+ TEST_ASSERT_EQUAL_INT64(expected, actual)
+
+Compare two integers for equality and display errors as signed integers. A cast will be performed
+to your natural integer size so often this can just be used. When you need to specify the exact size,
+like when comparing arrays, you can use a specific version:
+
+ TEST_ASSERT_EQUAL_UINT(expected, actual)
+ TEST_ASSERT_EQUAL_UINT8(expected, actual)
+ TEST_ASSERT_EQUAL_UINT16(expected, actual)
+ TEST_ASSERT_EQUAL_UINT32(expected, actual)
+ TEST_ASSERT_EQUAL_UINT64(expected, actual)
+
+Compare two integers for equality and display errors as unsigned integers. Like INT, there are
+variants for different sizes also.
+
+ TEST_ASSERT_EQUAL_HEX(expected, actual)
+ TEST_ASSERT_EQUAL_HEX8(expected, actual)
+ TEST_ASSERT_EQUAL_HEX16(expected, actual)
+ TEST_ASSERT_EQUAL_HEX32(expected, actual)
+ TEST_ASSERT_EQUAL_HEX64(expected, actual)
+
+Compares two integers for equality and display errors as hexadecimal. Like the other integer comparisons,
+you can specify the size... here the size will also effect how many nibbles are shown (for example, `HEX16`
+will show 4 nibbles).
+
+ _ARRAY
+
+You can append `_ARRAY` to any of these macros to make an array comparison of that type. Here you will
+need to care a bit more about the actual size of the value being checked. You will also specify an
+additional argument which is the number of elements to compare. For example:
+
+ TEST_ASSERT_EQUAL_HEX8_ARRAY(expected, actual, elements)
+
+ TEST_ASSERT_EQUAL(expected, actual)
+
+Another way of calling TEST_ASSERT_EQUAL_INT
+
+ TEST_ASSERT_INT_WITHIN(delta, expected, actual)
+
+Asserts that the actual value is within plus or minus delta of the expected value. This also comes in
+size specific variants.
+
+
+Numerical Assertions: Bitwise
+-----------------------------
+
+ TEST_ASSERT_BITS(mask, expected, actual)
+
+Use an integer mask to specify which bits should be compared between two other integers. High bits in the mask are compared, low bits ignored.
+
+ TEST_ASSERT_BITS_HIGH(mask, actual)
+
+Use an integer mask to specify which bits should be inspected to determine if they are all set high. High bits in the mask are compared, low bits ignored.
+
+ TEST_ASSERT_BITS_LOW(mask, actual)
+
+Use an integer mask to specify which bits should be inspected to determine if they are all set low. High bits in the mask are compared, low bits ignored.
+
+ TEST_ASSERT_BIT_HIGH(bit, actual)
+
+Test a single bit and verify that it is high. The bit is specified 0-31 for a 32-bit integer.
+
+ TEST_ASSERT_BIT_LOW(bit, actual)
+
+Test a single bit and verify that it is low. The bit is specified 0-31 for a 32-bit integer.
+
+Numerical Assertions: Floats
+----------------------------
+
+ TEST_ASSERT_FLOAT_WITHIN(delta, expected, actual)
+
+Asserts that the actual value is within plus or minus delta of the expected value.
+
+ TEST_ASSERT_EQUAL_FLOAT(expected, actual)
+ TEST_ASSERT_EQUAL_DOUBLE(expected, actual)
+
+Asserts that two floating point values are "equal" within a small % delta of the expected value.
+
+String Assertions
+-----------------
+
+ TEST_ASSERT_EQUAL_STRING(expected, actual)
+
+Compare two null-terminate strings. Fail if any character is different or if the lengths are different.
+
+ TEST_ASSERT_EQUAL_STRING_LEN(expected, actual, len)
+
+Compare two strings. Fail if any character is different, stop comparing after len characters.
+
+ TEST_ASSERT_EQUAL_STRING_MESSAGE(expected, actual, message)
+
+Compare two null-terminate strings. Fail if any character is different or if the lengths are different. Output a custom message on failure.
+
+ TEST_ASSERT_EQUAL_STRING_LEN_MESSAGE(expected, actual, len, message)
+
+Compare two strings. Fail if any character is different, stop comparing after len characters. Output a custom message on failure.
+
+Pointer Assertions
+------------------
+
+Most pointer operations can be performed by simply using the integer comparisons above. However, a couple of special cases are added for clarity.
+
+ TEST_ASSERT_NULL(pointer)
+
+Fails if the pointer is not equal to NULL
+
+ TEST_ASSERT_NOT_NULL(pointer)
+
+Fails if the pointer is equal to NULL
+
+Memory Assertions
+-----------------
+
+ TEST_ASSERT_EQUAL_MEMORY(expected, actual, len)
+
+Compare two blocks of memory. This is a good generic assertion for types that can't be coerced into acting like
+standard types... but since it's a memory compare, you have to be careful that your data types are packed.
+
+_MESSAGE
+--------
+
+you can append _MESSAGE to any of the macros to make them take an additional argument. This argument
+is a string that will be printed at the end of the failure strings. This is useful for specifying more
+information about the problem.
+