Ram Gandikota
FRDM K64F Metronome
Diff: easy-connect/esp8266-driver/ESP8266/ATParser/BufferedSerial/BufferedSerial.h
- Revision:
- 0:dbad57390bd1
diff -r 000000000000 -r dbad57390bd1 easy-connect/esp8266-driver/ESP8266/ATParser/BufferedSerial/BufferedSerial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/esp8266-driver/ESP8266/ATParser/BufferedSerial/BufferedSerial.h Sun May 14 18:37:05 2017 +0000
@@ -0,0 +1,168 @@
+
+/**
+ * @file BufferedSerial.h
+ * @brief Software Buffer - Extends mbed Serial functionallity adding irq driven TX and RX
+ * @author sam grove
+ * @version 1.0
+ * @see
+ *
+ * Copyright (c) 2013
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef BUFFEREDSERIAL_H
+#define BUFFEREDSERIAL_H
+
+#include "mbed.h"
+#include "MyBuffer.h"
+
+/** A serial port (UART) for communication with other serial devices
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ * #include "BufferedSerial.h"
+ *
+ * BufferedSerial pc(USBTX, USBRX);
+ *
+ * int main()
+ * {
+ * while(1)
+ * {
+ * Timer s;
+ *
+ * s.start();
+ * pc.printf("Hello World - buffered\n");
+ * int buffered_time = s.read_us();
+ * wait(0.1f); // give time for the buffer to empty
+ *
+ * s.reset();
+ * printf("Hello World - blocking\n");
+ * int polled_time = s.read_us();
+ * s.stop();
+ * wait(0.1f); // give time for the buffer to empty
+ *
+ * pc.printf("printf buffered took %d us\n", buffered_time);
+ * pc.printf("printf blocking took %d us\n", polled_time);
+ * wait(0.5f);
+ * }
+ * }
+ * @endcode
+ */
+
+/**
+ * @class BufferedSerial
+ * @brief Software buffers and interrupt driven tx and rx for Serial
+ */
+class BufferedSerial : public RawSerial
+{
+private:
+ MyBuffer <char> _rxbuf;
+ MyBuffer <char> _txbuf;
+ uint32_t _buf_size;
+ uint32_t _tx_multiple;
+
+ void rxIrq(void);
+ void txIrq(void);
+ void prime(void);
+
+ Callback<void()> _cbs[2];
+
+public:
+ /** Create a BufferedSerial port, connected to the specified transmit and receive pins
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ * @param buf_size printf() buffer size
+ * @param tx_multiple amount of max printf() present in the internal ring buffer at one time
+ * @param name optional name
+ * @note Either tx or rx may be specified as NC if unused
+ */
+ BufferedSerial(PinName tx, PinName rx, uint32_t buf_size = 256, uint32_t tx_multiple = 4,const char* name=NULL);
+
+ /** Destroy a BufferedSerial port
+ */
+ virtual ~BufferedSerial(void);
+
+ /** Check on how many bytes are in the rx buffer
+ * @return 1 if something exists, 0 otherwise
+ */
+ virtual int readable(void);
+
+ /** Check to see if the tx buffer has room
+ * @return 1 always has room and can overwrite previous content if too small / slow
+ */
+ virtual int writeable(void);
+
+ /** Get a single byte from the BufferedSerial Port.
+ * Should check readable() before calling this.
+ * @return A byte that came in on the Serial Port
+ */
+ virtual int getc(void);
+
+ /** Write a single byte to the BufferedSerial Port.
+ * @param c The byte to write to the Serial Port
+ * @return The byte that was written to the Serial Port Buffer
+ */
+ virtual int putc(int c);
+
+ /** Write a string to the BufferedSerial Port. Must be NULL terminated
+ * @param s The string to write to the Serial Port
+ * @return The number of bytes written to the Serial Port Buffer
+ */
+ virtual int puts(const char *s);
+
+ /** Write a formatted string to the BufferedSerial Port.
+ * @param format The string + format specifiers to write to the Serial Port
+ * @return The number of bytes written to the Serial Port Buffer
+ */
+ virtual int printf(const char* format, ...);
+
+ /** Write data to the Buffered Serial Port
+ * @param s A pointer to data to send
+ * @param length The amount of data being pointed to
+ * @return The number of bytes written to the Serial Port Buffer
+ */
+ virtual ssize_t write(const void *s, std::size_t length);
+
+ /** Attach a function to call whenever a serial interrupt is generated
+ * @param func A pointer to a void function, or 0 to set as none
+ * @param type Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ virtual void attach(Callback<void()> func, IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to call
+ * @param type Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template <typename T>
+ void attach(T *obj, void (T::*method)(), IrqType type=RxIrq) {
+ attach(Callback<void()>(obj, method), type);
+ }
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to call
+ * @param type Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template <typename T>
+ void attach(T *obj, void (*method)(T*), IrqType type=RxIrq) {
+ attach(Callback<void()>(obj, method), type);
+ }
+};
+
+#endif