Diff: pal/Source/PAL-Impl/Services-API/pal_network.h

Revision:

0:a7a43371b306

diff -r 000000000000 -r a7a43371b306 pal/Source/PAL-Impl/Services-API/pal_network.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pal/Source/PAL-Impl/Services-API/pal_network.h	Sun May 14 18:40:18 2017 +0000
@@ -0,0 +1,323 @@
+/*
+* Copyright (c) 2016 ARM Limited. All rights reserved.
+* SPDX-License-Identifier: Apache-2.0
+* Licensed under the Apache License, Version 2.0 (the License); you may
+* not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an AS IS BASIS, WITHOUT
+* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+
+
+#ifndef _PAL_SOCKET_H
+#define _PAL_SOCKET_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "pal.h"
+//! PAL network socket API
+//! pal network sockets configurations options:
+//! set PAL_NET_TCP_AND_TLS_SUPPORT to true TCP is supported by the platform and is required
+//! set PAL_NET_ASYNCHRONOUS_SOCKET_API to true if asynchronous socket API supported by the platform and is required : CURRENTLY MANDATORY
+//! set PAL_NET_DNS_SUPPORT to true if you DNS url lookup API is supported.
+
+typedef uint32_t palSocketLength_t; /*! length of data */
+typedef void* palSocket_t; /*! PAL socket handle type */
+
+#define  PAL_NET_MAX_ADDR_SIZE 32 // check if we can make this more efficient
+
+typedef struct palSocketAddress {
+    unsigned short    addressType;    /*! address family for the socket*/
+    char              addressData[PAL_NET_MAX_ADDR_SIZE];  /*! address (based on protocol)*/
+} palSocketAddress_t; /*! address data structure with enough room to support IPV4 and IPV6*/
+
+typedef struct palNetInterfaceInfo{
+    char interfaceName[16]; //15 + ‘\0’
+    palSocketAddress_t address;
+    uint32_t addressSize;
+} palNetInterfaceInfo_t;
+
+typedef enum {
+    PAL_AF_UNSPEC = 0,
+    PAL_AF_INET = 2,    /*! Internet IP Protocol    */
+    PAL_AF_INET6 = 10, /*! IP version 6     */
+} palSocketDomain_t;/*! network domains supported by PAL*/
+
+typedef enum {
+#if PAL_NET_TCP_AND_TLS_SUPPORT
+    PAL_SOCK_STREAM = 1,    /*! stream socket   */
+    PAL_SOCK_STREAM_SERVER = 99,    /*! stream socket   */
+#endif //PAL_NET_TCP_AND_TLS_SUPPORT
+    PAL_SOCK_DGRAM = 2  /*! datagram socket     */
+} palSocketType_t;/*! socket types supported by PAL */
+
+
+typedef enum {
+    PAL_SO_REUSEADDR = 0x0004,  /*! allow local address reuse */
+#if PAL_NET_TCP_AND_TLS_SUPPORT // socket options below supported only if TCP is supported.
+    PAL_SO_KEEPALIVE = 0x0008, /*! keep TCP connection open even if idle using periodic messages*/
+#endif //PAL_NET_TCP_AND_TLS_SUPPORT
+    PAL_SO_SNDTIMEO = 0x1005,  /*! send timeout */
+    PAL_SO_RCVTIMEO = 0x1006,  /*! receive timeout */
+} palSocketOptionName_t;/*! socket options supported by PAL */
+
+#define PAL_NET_DEFAULT_INTERFACE 0xFFFFFFFF
+
+#define PAL_IPV4_ADDRESS_SIZE 4
+#define PAL_IPV6_ADDRESS_SIZE 16
+
+typedef uint8_t palIpV4Addr_t[PAL_IPV4_ADDRESS_SIZE];
+typedef uint8_t palIpV6Addr_t[PAL_IPV6_ADDRESS_SIZE];
+
+typedef struct pal_timeVal{
+    int32_t    pal_tv_sec;      /*! seconds */
+    int32_t    pal_tv_usec;     /*! microseconds */
+} pal_timeVal_t;
+
+
+/*! Register a network interface for use with PAL sockets - must be called before other socket functions - most APIs will not work before a single interface is added.
+* @param[in] networkInterfaceContext of the network  interface to be added (OS specific , e.g. in MbedOS this is the NetworkInterface object pointer for the network adapter [note: we assume connect has already been called on this]) - if not available use NULL .
+* @param[out] InterfaceIndex will contain the index assigned to the interface in case it has been assigned successfully. this index can be used when creating a socket to bind the socket to the interface.
+\return the function returns the status in the form of palStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_registerNetworkInterface(void* networkInterfaceContext, uint32_t* interfaceIndex);
+
+/*! set a port to a palSocketAddress_t
+* setting it can be done either directly or via the  palSetSockAddrIPV4Addr or  palSetSockAddrIPV6Addr functions
+* @param[in,out] address the address to set
+* @param[in] port the port number to set
+\return the function returns the status in the form of palStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+\note for the socket to be set correctly the addressType field of the address must be set correctly. 
+*/
+palStatus_t pal_setSockAddrPort(palSocketAddress_t* address, uint16_t port);
+
+/*! set an ipV4 address to a palSocketAddress_t and also set the addressType to ipv4
+* @param[in,out] address the address to set
+* @param[in] ipV4Addr the address value to set
+\return the function returns the status in the form of palStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_setSockAddrIPV4Addr(palSocketAddress_t* address, palIpV4Addr_t ipV4Addr);
+
+/*! set an ipV6 address to a palSocketAddress_t and also set the addressType to ipv6
+* @param[in,out] address the address to set
+* @param[in] ipV6Addr the address value to set
+\return the function returns the status in the form of palStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_setSockAddrIPV6Addr(palSocketAddress_t* address, palIpV6Addr_t ipV6Addr);
+
+/*! get an ipV4 address from a palSocketAddress_t
+* @param[in] address the address to set
+* @param[out] ipV4Addr the address that is set in the address
+\return the function returns the status in the form of palStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_getSockAddrIPV4Addr(const palSocketAddress_t* address, palIpV4Addr_t ipV4Addr);
+
+/*! get an ipV6 address from a palSocketAddress_t
+* @param[in] address the address to set
+* @param[out] ipV6Addr the address that is set in the address
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_getSockAddrIPV6Addr(const palSocketAddress_t* address, palIpV6Addr_t ipV6Addr);
+
+/*! get a port from a palSocketAddress_t
+* @param[in] address the address to set
+* @param[out] port the port that is set in the address
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_getSockAddrPort(const palSocketAddress_t* address, uint16_t* port);
+
+/*! get a network socket
+* @param[in] domain the domain for the created socket (see palSocketDomain_t for supported types)
+* @param[in] type the type for the created socket (see palSocketType_t for supported types)
+* @param[in] nonBlockingSocket if true the socket created is created as non-blocking (i.e. with O_NONBLOCK set)
+* @param[in] interfaceNum the number of the network interface used for this socket (info in interfaces supported via pal_getNumberOfNetInterfaces and pal_getNetInterfaceInfo ), choose PAL_NET_DEFAULT_INTERFACE for default interface.
+* @param[out] socket socket is returned through this output parameter
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_socket(palSocketDomain_t domain, palSocketType_t type, bool nonBlockingSocket, uint32_t interfaceNum, palSocket_t* socket);
+
+/*! get options for a given network socket
+* @param[in] socket the socket for which to get options
+* @param[in] optionName for which we are setting the option (see enum PAL_NET_SOCKET_OPTION for supported types)
+* @param[out] optionValue the buffer holding the option value returned by the function
+* @param[in, out] optionLength the size of the buffer provided for optionValue when calling the function after the call it will contain the length of data actually written to the optionValue buffer.
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_getSocketOptions(palSocket_t socket, palSocketOptionName_t optionName, void* optionValue, palSocketLength_t* optionLength);
+
+/*! set options for a given network socket
+* @param[in] socket the socket for which to get options
+* @param[in] optionName for which we are setting the option (see enum PAL_NET_SOCKET_OPTION for supported types)
+* @param[in] optionValue the buffer holding the option value to set for the given option
+* @param[in] optionLength  the size of the buffer provided for optionValue
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_setSocketOptions(palSocket_t socket, int optionName, const void* optionValue, palSocketLength_t optionLength);
+
+/*! bind a given socket to a local address
+* @param[in] socket the socket to bind
+* @param[in] myAddress the address to which to bind
+* @param[in] addressLength the length of the address passed in myAddress
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_bind(palSocket_t socket, palSocketAddress_t* myAddress, palSocketLength_t addressLength);
+
+/*! receive a payload from the given socket
+* @param[in] socket the socket to receive from [we expect sockets passed to this function to be of type PAL_SOCK_DGRAM  ( the implementation may support other types as well) ]
+* @param[out] buffer the buffer for the payload data
+* @param[in] length of the buffer for the payload data
+* @param[out] from the address which sent the payload
+* @param[in, out] fromLength the length of the 'from' address, after completion will contain the amount of data actually written to the from address
+* @param[out] bytesReceived after the call will contain the actual amount of payload data received to the buffer
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_receiveFrom(palSocket_t socket, void* buffer, size_t length, palSocketAddress_t* from, palSocketLength_t* fromLength, size_t* bytesReceived);
+
+/*! send a payload to the given address using the given socket
+* @param[in] socket the socket to use for sending the payload [we expect sockets passed to this function to be of type PAL_SOCK_DGRAM  ( the implementation may support other types as well) ]
+* @param[in] buffer the buffer for the payload data
+* @param[in] length of the buffer for the payload data
+* @param[in] to the address to which to payload should be sent
+* @param[in] toLength the length of the 'to' address
+* @param[out] bytesSent after the call will contain the actual amount of payload data sent
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_sendTo(palSocket_t socket, const void* buffer, size_t length, const palSocketAddress_t* to, palSocketLength_t toLength, size_t* bytesSent);
+
+/*! close a network socket
+* @param[in,out] socket release and zero socket pointed to by given pointer.
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+\note recieves palSocket_t* and not palSocket_t so that it can zero the socket to avoid re-use.
+*/
+palStatus_t pal_close(palSocket_t* socket);
+
+/*! get the number of current network interfaces
+* @param[out] numInterfaces will hold the number of interfaces after a successful call
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_getNumberOfNetInterfaces(uint32_t* numInterfaces);
+
+/*! get information regarding the socket at the index/interface number given (this number is returned when registering the socket)
+* @param[in] interfaceNum the number of the interface to get information for.
+* @param[out] interfaceInfo will be set to the information for the given interface number.
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_getNetInterfaceInfo(uint32_t interfaceNum, palNetInterfaceInfo_t* interfaceInfo);
+
+
+#define PAL_NET_SOCKET_SELECT_MAX_SOCKETS 8
+#define PAL_NET_SOCKET_SELECT_RX_BIT (1)
+#define PAL_NET_SOCKET_SELECT_TX_BIT (2)
+#define PAL_NET_SOCKET_SELECT_ERR_BIT (4)
+
+#define PAL_NET_SELECT_IS_RX(socketStatus, index)   ((socketStatus[index] | PAL_NET_SOCKET_SELECT_RX_BIT) != 0) /*! check if RX bit is set in select result for a given socket index*/
+#define PAL_NET_SELECT_IS_TX(socketStatus, index)   ((socketStatus[index] | PAL_NET_SOCKET_SELECT_TX_BIT) != 0) /*! check if TX bit is set in select result for a given socket index*/
+#define PAL_NET_SELECT_IS_ERR(socketStatus, index)  ((socketStatus[index] | PAL_NET_SOCKET_SELECT_ERR_BIT) != 0) /*! check if ERR bit is set in select result for a given socket index*/
+
+/*! check if one or more (up to PAL_NET_SOCKET_SELECT_MAX_SOCKETS) sockets given has data available for reading/writing/error, the function will block until data is available for one of the given sockets or the timeout expires.
+To use the function: set the sockets you want to check in the socketsToCheck array and set a timeout, when it returns the socketStatus output will indicate the status of each socket passed in.
+* @param[in] socketsToCheck on input: the array of up to 8 sockets handles to check.
+* @param[in] numberOfSockets the number of sockets set in the input socketsToCheck array.
+* @param[in] timeout the amount of time till timeout if no socket activity is detected
+* @param[out] socketStatus will provide information on each socket in the input array indicating which event was set (none, rx, tx, err) check for desired event using macros.
+* @param[out] numberOfSocketsSet is the total number of sockets set in all three data sets (tx, rx, err)after the function completes
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+\note the entry in index x in the socketStatus array corresponds to the socket at index x in the sockets to check array.
+*/
+palStatus_t pal_socketMiniSelect(const palSocket_t socketsToCheck[PAL_NET_SOCKET_SELECT_MAX_SOCKETS], uint32_t numberOfSockets, pal_timeVal_t* timeout,
+                                uint8_t palSocketStatus[PAL_NET_SOCKET_SELECT_MAX_SOCKETS], uint32_t* numberOfSocketsSet);
+
+
+#if PAL_NET_TCP_AND_TLS_SUPPORT // functionality below supported only in case TCP is supported.
+
+
+/*! use given socket to listed for incoming connections, may also limit queue of incoming connections.
+* @param[in] socket the socket to listen on [we expect sockets passed to this function to be of type PAL_SOCK_STREAM_SERVER  ( the implementation may support other types as well) ]
+* @param[in] backlog the amount connections of pending connections which can be saved for the socket
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_listen(palSocket_t socket, int backlog);
+
+/*! accept a connection on the given socket
+* @param[in] socket the socket on which to accept the connection (prerequisite: socket already created and bind and listen have been called on it ) [we expect sockets passed to this function to be of type PAL_SOCK_STREAM_SERVER  ( the implementation may support other types as well) ]
+* @param[out] address the source address of the incoming connection
+* @param[in, out] addressLen the length of the address field on input, the length of the data returned on output.
+* @param[out] acceptedSocket the socket of the accepted connection will be returned here if connection accepted successfully.
+
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_accept(palSocket_t socket, palSocketAddress_t* address, palSocketLength_t* addressLen, palSocket_t* acceptedSocket);
+
+/*! open a connection from the given socket to the given address
+* @param[in] socket the socket to use for connection to the given address [we expect sockets passed to this function to be of type PAL_SOCK_STREAM ( the implementation may support other types as well) ]
+* @param[in] address the destination address of the connection
+* @param[in] addressLen the length of the address field
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_connect(palSocket_t socket, const palSocketAddress_t* address, palSocketLength_t addressLen);
+
+/*! receive data from the given connected socket
+* @param[in] socket the connected socket on which to receive data [we expect sockets passed to this function to be of type PAL_SOCK_STREAM ( the implementation may support other types as well) ]
+* @param[out] buf the output buffer for the message data
+* @param[in] len the length of the input data buffer
+* @param[out] recievedDataSize the length of the data actually received
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_recv(palSocket_t socket, void* buf, size_t len, size_t* recievedDataSize);
+
+/*! send a given buffer via the given connected socket
+* @param[in] socket the connected socket on which to send data [we expect sockets passed to this function to be of type PAL_SOCK_STREAM ( the implementation may support other types as well) ]
+* @param[in] buf the output buffer for the message data
+* @param[in] len the length of the input data buffer
+* @param[out] sentDataSize the length of the data sent
+\return the function returns the status as in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_send(palSocket_t socket, const void* buf, size_t len, size_t* sentDataSize);
+
+
+#endif //PAL_NET_TCP_AND_TLS_SUPPORT
+
+
+#if PAL_NET_ASYNCHRONOUS_SOCKET_API
+
+/*! callback function called when an even happens an asynchronous socket for which it was set using the pal_asynchronousSocket. 
+*/
+typedef void(*palAsyncSocketCallback_t)();
+
+/*! get an asynchronous network socket
+* @param[in] domain the domain for the created socket (see enum palSocketDomain_t for supported types)
+* @param[in] type the type for the created socket (see enum palSocketType_t for supported types)
+* @param[in] nonBlockingSocket if true the socket created is created as non-blocking (i.e. with O_NONBLOCK set)
+* @param[in] interfaceNum the number of the network interface used for this socket (info in interfaces supported via pal_getNumberOfNetInterfaces and pal_getNetInterfaceInfo ), choose PAL_NET_DEFAULT_INTERFACE for default interface.
+* @param[in] callback a callback function that will be called when any supported event happens to the given asynchronous socket (see palAsyncSocketCallbackType enum for the types of events supported)
+* @param[out] socket socket is returned through this output parameter
+\return the function returns the status in the form of PalStatus_t which will be PAL_SUCCESS (0) in case of success or a specific negative error code in case of failure
+*/
+palStatus_t pal_asynchronousSocket(palSocketDomain_t domain, palSocketType_t type, bool nonBlockingSocket, uint32_t interfaceNum, palAsyncSocketCallback_t callback, palSocket_t* socket);
+
+#endif
+
+#if PAL_NET_DNS_SUPPORT
+
+/*! this function will translate from a URL to a palSocketAddress_t which can be used with pal sockets. It supports both IP address as strings and URLs (using DNS lookup).
+* @param[in] url the URL (or IP address sting) to be translated into a palSocketAddress_t.
+* @param[out] address the address for the output of the translation.
+*/
+palStatus_t pal_getAddressInfo(const char* url, palSocketAddress_t* address, palSocketLength_t* addressLength);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif //_PAL_SOCKET_H
+
+