File content as of revision 0:a7a43371b306:

/* Unity Configuration
 * As of May 11th, 2016 at ThrowTheSwitch/Unity commit 837c529
 * See Also: Unity/docs/UnityConfigurationGuide.pdf
 *
 * Unity is designed to run on almost anything that is targeted by a C compiler.
 * It would be awesome if this could be done with zero configuration. While
 * there are some targets that come close to this dream, it is sadly not
 * universal. It is likely that you are going to need at least a couple of the
 * configuration options described in this document.
 *
 * All of Unity's configuration options are `#defines`. Most of these are simple
 * definitions. A couple are macros with arguments. They live inside the
 * unity_internals.h header file. We don't necessarily recommend opening that
 * file unless you really need to. That file is proof that a cross-platform
 * library is challenging to build. From a more positive perspective, it is also
 * proof that a great deal of complexity can be centralized primarily to one
 * place in order to provide a more consistent and simple experience elsewhere.
 *
 * Using These Options
 * It doesn't matter if you're using a target-specific compiler and a simulator
 * or a native compiler. In either case, you've got a couple choices for
 * configuring these options:
 *
 *  1. Because these options are specified via C defines, you can pass most of
 *     these options to your compiler through command line compiler flags. Even
 *     if you're using an embedded target that forces you to use their
 *     overbearing IDE for all configuration, there will be a place somewhere in
 *     your project to configure defines for your compiler.
 *  2. You can create a custom `unity_config.h` configuration file (present in
 *     your toolchain's search paths). In this file, you will list definitions
 *     and macros specific to your target. All you must do is define
 *     `UNITY_INCLUDE_CONFIG_H` and Unity will rely on `unity_config.h` for any
 *     further definitions it may need.
 */

#ifndef UNITY_CONFIG_H
#define UNITY_CONFIG_H

#ifdef __cplusplus
extern "C"
{
#endif

/* ************************* AUTOMATIC INTEGER TYPES ***************************
 * C's concept of an integer varies from target to target. The C Standard has
 * rules about the `int` matching the register size of the target
 * microprocessor. It has rules about the `int` and how its size relates to
 * other integer types. An `int` on one target might be 16 bits while on another
 * target it might be 64. There are more specific types in compilers compliant
 * with C99 or later, but that's certainly not every compiler you are likely to
 * encounter. Therefore, Unity has a number of features for helping to adjust
 * itself to match your required integer sizes. It starts off by trying to do it
 * automatically.
 **************************************************************************** */

/* The first thing that Unity does to guess your types is check `stdint.h`. This
 * file includes defines like `UINT_MAX` that Unity can make use of to learn a
 * lot about your system. It's possible you don't want it to do this or it's
 * possible that your system doesn't support `stdint.h`. If that's the case,
 * you're going to want to define this. That way, Unity will know to skip the
 * inclusion of this file and you won't be left with a compiler error.
 */
/* #define UNITY_EXCLUDE_STDINT_H */

/* The second attempt to guess your types is to check `limits.h`. Some compilers
 * that don't support `stdint.h` could include `limits.h` instead. If you don't
 * want Unity to check this file either, define this to make it skip the
 * inclusion.
 */
/* #define UNITY_EXCLUDE_LIMITS_H */

/* The third and final attempt to guess your types is to use the `sizeof()`
 * operator. Even if the first two options don't work, this one covers most
 * cases. There _is_ a rare compiler or two out there that doesn't support
 * `sizeof()` in the preprocessing stage, though. For these, you have the
 * ability to disable this feature as well.
 */
/* #define UNITY_EXCLUDE_SIZEOF */


/* ********************** MANUAL INTEGER TYPE DEFINITION ***********************
 * If you've disabled all of the automatic options above, you're going to have
 * to do the configuration yourself. There are just a handful of defines that
 * you are going to specify if you don't like the defaults.
 **************************************************************************** */

 /* Define this to be the number of bits an `int` takes up on your system. The
 * default, if not auto-detected, is 32 bits.
 *
 * Example:
 */
/* #define UNITY_INT_WIDTH 16 */

/* Define this to be the number of bits a `long` takes up on your system. The
 * default, if not autodetected, is 32 bits. This is used to figure out what
 * kind of 64-bit support your system can handle.  Does it need to specify a
 * `long` or a `long long` to get a 64-bit value. On 16-bit systems, this option
 * is going to be ignored.
 *
 * Example:
 */
/* #define UNITY_LONG_WIDTH 16 */

/* Define this to be the number of bits a pointer takes up on your system. The
 * default, if not autodetected, is 32-bits. If you're getting ugly compiler
 * warnings about casting from pointers, this is the one to look at.
 *
 * Example:
 */
/* #define UNITY_POINTER_WIDTH 64 */

/* Unity will automatically include 64-bit support if it auto-detects it, or if
 * your `int`, `long`, or pointer widths are greater than 32-bits. Define this
 * to enable 64-bit support if none of the other options already did it for you.
 * There can be a significant size and speed impact to enabling 64-bit support
 * on small targets, so don't define it if you don't need it.
 */
/* #define UNITY_INCLUDE_64 */


/* *************************** FLOATING POINT TYPES ****************************
 * In the embedded world, it's not uncommon for targets to have no support for
 * floating point operations at all or to have support that is limited to only
 * single precision. We are able to guess integer sizes on the fly because
 * integers are always available in at least one size. Floating point, on the
 * other hand, is sometimes not available at all. Trying to include `float.h` on
 * these platforms would result in an error. This leaves manual configuration as
 * the only option.
 **************************************************************************** */

 /* By default, Unity guesses that you will want single precision floating point
  * support, but not double precision. It's easy to change either of these using
  * the include and exclude options here. You may include neither, either, or
  * both, as suits your needs.
  */
/* #define UNITY_INCLUDE_FLOAT  */
/* #define UNITY_EXCLUDE_FLOAT  */
/* #define UNITY_INCLUDE_DOUBLE */
/* #define UNITY_EXCLUDE_DOUBLE */

/* For features that are enabled, the following floating point options also
 * become available.
 */

/* Unity aims for as small of a footprint as possible and avoids most standard
 * library calls (some embedded platforms don't have a standard library!).
 * Because of this, its routines for printing integer values are minimalist and
 * hand-coded. To keep Unity universal, though, we chose to _not_ develop our
 * own floating point print routines. Instead, the display of floating point
 * values during a failure are optional. By default, Unity will not print the
 * actual results of floating point assertion failure. So a failed assertion
 * will produce a message like `"Values Not Within Delta"`. If you would like
 * verbose failure messages for floating point assertions, use these options to
 * give more explicit failure messages (e.g. `"Expected 4.56 Was 4.68"`). Note
 * that this feature requires the use of `sprintf` so might not be desirable in
 * all cases.
 */
/* #define UNITY_FLOAT_VERBOSE  */
/* #define UNITY_DOUBLE_VERBOSE */

/* If enabled, Unity assumes you want your `FLOAT` asserts to compare standard C
 * floats. If your compiler supports a specialty floating point type, you can
 * always override this behavior by using this definition.
 *
 * Example:
 */
/* #define UNITY_FLOAT_TYPE float16_t */

/* If enabled, Unity assumes you want your `DOUBLE` asserts to compare standard
 * C doubles. If you would like to change this, you can specify something else
 * by using this option. For example, defining `UNITY_DOUBLE_TYPE` to `long
 * double` could enable gargantuan floating point types on your 64-bit processor
 * instead of the standard `double`.
 *
 * Example:
 */
/* #define UNITY_DOUBLE_TYPE long double */

/* If you look up `UNITY_ASSERT_EQUAL_FLOAT` and `UNITY_ASSERT_EQUAL_DOUBLE` as
 * documented in the Unity Assertion Guide, you will learn that they are not
 * really asserting that two values are equal but rather that two values are
 * "close enough" to equal. "Close enough" is controlled by these precision
 * configuration options. If you are working with 32-bit floats and/or 64-bit
 * doubles (the normal on most processors), you should have no need to change
 * these options. They are both set to give you approximately 1 significant bit
 * in either direction. The float precision is 0.00001 while the double is
 * 10^-12. For further details on how this works, see the appendix of the Unity
 * Assertion Guide.
 *
 * Example:
 */
/* #define UNITY_FLOAT_PRECISION 0.001f  */
/* #define UNITY_DOUBLE_PRECISION 0.001f */


/* *************************** TOOLSET CUSTOMIZATION ***************************
 * In addition to the options listed above, there are a number of other options
 * which will come in handy to customize Unity's behavior for your specific
 * toolchain. It is possible that you may not need to touch any of these but
 * certain platforms, particularly those running in simulators, may need to jump
 * through extra hoops to operate properly. These macros will help in those
 * situations.
 **************************************************************************** */

/* By default, Unity prints its results to `stdout` as it runs. This works
 * perfectly fine in most situations where you are using a native compiler for
 * testing. It works on some simulators as well so long as they have `stdout`
 * routed back to the command line. There are times, however, where the
 * simulator will lack support for dumping results or you will want to route
 * results elsewhere for other reasons. In these cases, you should define the
 * `UNITY_OUTPUT_CHAR` macro. This macro accepts a single character at a time
 * (as an `int`, since this is the parameter type of the standard C `putchar`
 * function most commonly used). You may replace this with whatever function
 * call you like.
 *
 * Example:
 * Say you are forced to run your test suite on an embedded processor with no
 * `stdout` option. You decide to route your test result output to a custom
 * serial `RS232_putc()` function you wrote like thus:
 */
/* #define UNITY_OUTPUT_CHAR(a)    RS232_putc(a) */
/* #define UNITY_OUTPUT_FLUSH()    RS232_config(115200,1,8,0) */
/* #define UNITY_OUTPUT_START()    RS232_flush() */
/* #define UNITY_OUTPUT_COMPLETE() RS232_close() */

/* For some targets, Unity can make the otherwise required `setUp()` and
 * `tearDown()` functions optional. This is a nice convenience for test writers
 * since `setUp` and `tearDown` don't often actually _do_ anything. If you're
 * using gcc or clang, this option is automatically defined for you. Other
 * compilers can also support this behavior, if they support a C feature called
 * weak functions. A weak function is a function that is compiled into your
 * executable _unless_ a non-weak version of the same function is defined
 * elsewhere. If a non-weak version is found, the weak version is ignored as if
 * it never existed. If your compiler supports this feature, you can let Unity
 * know by defining `UNITY_SUPPORT_WEAK` as the function attributes that would
 * need to be applied to identify a function as weak. If your compiler lacks
 * support for weak functions, you will always need to define `setUp` and
 * `tearDown` functions (though they can be and often will be just empty). The
 * most common options for this feature are:
 */
/* #define UNITY_SUPPORT_WEAK weak */
/* #define UNITY_SUPPORT_WEAK __attribute__((weak)) */

/* Some compilers require a custom attribute to be assigned to pointers, like
 * `near` or `far`. In these cases, you can give Unity a safe default for these
 * by defining this option with the attribute you would like.
 *
 * Example:
 */
/* #define UNITY_PTR_ATTRIBUTE __attribute__((far)) */
/* #define UNITY_PTR_ATTRIBUTE near */

#ifdef __cplusplus
}
#endif /* extern "C" */

#endif /* UNITY_CONFIG_H */