File content as of revision 0:a7a43371b306:

#!/usr/bin/ruby
#
# unity_to_junit.rb
#
require 'fileutils'
require 'optparse'
require 'ostruct'
require 'set'

require 'pp'

VERSION = 1.0

class ArgvParser

  #
  # Return a structure describing the options.
  #
  def self.parse(args)
    # The options specified on the command line will be collected in *options*.
    # We set default values here.
    options = OpenStruct.new
    options.results_dir = "."
    options.root_path = "."
    options.out_file = "results.xml"

    opts = OptionParser.new do |opts|
      opts.banner = "Usage: unity_to_junit.rb [options]"

      opts.separator ""
      opts.separator "Specific options:"

      opts.on("-r", "--results <dir>", "Look for Unity Results files here.") do |results|
        #puts "results #{results}"
        options.results_dir = results
      end

      opts.on("-p", "--root_path <path>", "Prepend this path to files in results.") do |root_path|
        options.root_path = root_path
      end

      opts.on("-o", "--output <filename>", "XML file to generate.") do |out_file|
        #puts "out_file: #{out_file}"
        options.out_file = out_file
      end

      opts.separator ""
      opts.separator "Common options:"

      # No argument, shows at tail.  This will print an options summary.
      opts.on_tail("-h", "--help", "Show this message") do
        puts opts
        exit
      end

      # Another typical switch to print the version.
      opts.on_tail("--version", "Show version") do
        puts "unity_to_junit.rb version #{VERSION}"
        exit
      end
    end

    opts.parse!(args)
    options
  end  # parse()

end  # class OptparseExample

class UnityToJUnit
  include FileUtils::Verbose
  attr_reader :report, :total_tests, :failures, :ignored

  def initialize
    @report = ''
    @unit_name = ''
  end

  def run
    # Clean up result file names
    results = @targets.map {|target| target.gsub(/\\/,"/")}
    #puts "Output File: #{@out_file}"
    f = File.new(@out_file, "w")
    write_xml_header(f)
    write_suites_header( f )
    results.each do |result_file|
      lines = File.readlines(result_file).map { |line| line.chomp }
      if lines.length == 0
        raise "Empty test result file: #{result_file}"
      else
        result_output = get_details(result_file, lines)
        tests,failures,ignored = parse_test_summary(lines)
        result_output[:counts][:total] = tests
        result_output[:counts][:failed] = failures
        result_output[:counts][:ignored] = ignored
        result_output[:counts][:passed] = (result_output[:counts][:total] - result_output[:counts][:failed] - result_output[:counts][:ignored])
      end
      #use line[0] from the test output to get the test_file path and name
      test_file_str = lines[0].gsub("\\","/")
      test_file_str = test_file_str.split(":")
      test_file = if (test_file_str.length < 2)
        result_file
      else
        test_file_str[0] + ':' + test_file_str[1]
      end
      result_output[:source][:path] = File.dirname(test_file)
      result_output[:source][:file] = File.basename(test_file)

      # save result_output
      @unit_name = File.basename(test_file, ".*")

      write_suite_header( result_output[:counts], f)
      write_failures( result_output, f )
      write_tests( result_output, f )
      write_ignored( result_output, f )
      write_suite_footer( f )
    end
    write_suites_footer( f )
    f.close
  end

  def set_targets(target_array)
    @targets = target_array
  end

  def set_root_path(path)
    @root = path
  end
  def set_out_file(filename)
    @out_file = filename
  end
  def usage(err_msg=nil)
    puts "\nERROR: "
    puts err_msg if err_msg
    puts "Usage: unity_to_junit.rb [options]"
    puts ""
    puts "Specific options:"
    puts "    -r, --results <dir>              Look for Unity Results files here."
    puts "    -p, --root_path <path>           Prepend this path to files in results."
    puts "    -o, --output <filename>          XML file to generate."
    puts ""
    puts "Common options:"
    puts "    -h, --help                       Show this message"
    puts "        --version                    Show version"

    exit 1
  end

  protected
  def get_details(result_file, lines)
    results = get_results_structure
    lines.each do |line|
      line = line.gsub("\\","/")
      src_file,src_line,test_name,status,msg = line.split(/:/)
      line_out = ((@root and (@root != 0)) ? "#{@root}#{line}" : line ).gsub(/\//, "\\")
      case(status)
        when 'IGNORE' then results[:ignores] << {:test => test_name, :line => src_line, :message => msg}
        when 'FAIL'   then results[:failures] << {:test => test_name, :line => src_line, :message => msg}
        when 'PASS'   then results[:successes] << {:test => test_name, :line => src_line, :message => msg}
      end
    end
    return results
  end

  def parse_test_summary(summary)
    if summary.find { |v| v =~ /(\d+) Tests (\d+) Failures (\d+) Ignored/ }
      [$1.to_i,$2.to_i,$3.to_i]
    else
      raise "Couldn't parse test results: #{summary}"
    end
  end
  def here; File.expand_path(File.dirname(__FILE__)); end

  private

  def get_results_structure
    return {
      :source    => {:path => '', :file => ''},
      :successes => [],
      :failures  => [],
      :ignores   => [],
      :counts    => {:total => 0, :passed => 0, :failed => 0, :ignored  => 0},
      :stdout    => [],
    }
  end

  def write_xml_header( stream )
    stream.puts "<?xml version='1.0' encoding='utf-8' ?>"
  end

  def write_suites_header( stream )
    stream.puts "<testsuites>"
  end

  def write_suite_header( counts, stream )
    stream.puts "\t<testsuite errors=\"0\" skipped=\"#{counts[:ignored]}\" failures=\"#{counts[:failed]}\" tests=\"#{counts[:total]}\" name=\"unity\">"
  end

  def write_failures( results, stream )
    result = results[:failures]
    result.each do |item|
      filename = File.join(results[:source][:path], File.basename(results[:source][:file], '.*'))
      stream.puts "\t\t<testcase classname=\"#{@unit_name}\" name=\"#{item[:test]}\" time=\"0\">"
      stream.puts "\t\t\t<failure message=\"#{item[:message]}\" type=\"Assertion\"/>"
      stream.puts "\t\t\t<system-err>&#xD;[File] #{filename}&#xD;[Line] #{item[:line]}&#xD;</system-err>"
      stream.puts "\t\t</testcase>"
    end
  end

  def write_tests( results, stream )
    result = results[:successes]
    result.each do |item|
      filename = File.join(results[:source][:path], File.basename(results[:source][:file], '.*'))
      stream.puts "\t\t<testcase classname=\"#{@unit_name}\" name=\"#{item[:test]}\" time=\"0\" />"
    end
  end

  def write_ignored( results, stream )
    result = results[:ignores]
    result.each do |item|
      filename = File.join(results[:source][:path], File.basename(results[:source][:file], '.*'))
      puts "Writing ignored tests for test harness: #{filename}"
      stream.puts "\t\t<testcase classname=\"#{@unit_name}\" name=\"#{item[:test]}\" time=\"0\">"
      stream.puts "\t\t\t<skipped message=\"#{item[:message]}\" type=\"Assertion\"/>"
      stream.puts "\t\t\t<system-err>&#xD;[File] #{filename}&#xD;[Line] #{item[:line]}&#xD;</system-err>"
      stream.puts "\t\t</testcase>"
    end
  end

  def write_suite_footer( stream )
    stream.puts "\t</testsuite>"
  end

  def write_suites_footer( stream )
    stream.puts "</testsuites>"
  end
end #UnityToJUnit

if __FILE__ == $0
  #parse out the command options
  options = ArgvParser.parse(ARGV)

  #create an instance to work with
  utj = UnityToJUnit.new
  begin
    #look in the specified or current directory for result files
    targets = "#{options.results_dir.gsub(/\\/, '/')}**/*.test*"

    results = Dir[targets]
    raise "No *.testpass, *.testfail, or *.testresults files found in '#{targets}'" if results.empty?
    utj.set_targets(results)

    #set the root path
    utj.set_root_path(options.root_path)

    #set the output XML file name
    #puts "Output File from options: #{options.out_file}"
    utj.set_out_file(options.out_file)

    #run the summarizer
    puts utj.run
  rescue Exception => e
    utj.usage e.message
  end
end