Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Fork of UniGraphic by GraphicsDisplay

Revision:
5:b222a9461d6b
Parent:
4:12ba0ecc2c1f
Child:
7:bb0383b91104
diff -r 12ba0ecc2c1f -r b222a9461d6b Protocols/SPI16.cpp
--- a/Protocols/SPI16.cpp	Sun Feb 15 20:06:07 2015 +0000
+++ b/Protocols/SPI16.cpp	Mon Feb 16 00:52:24 2015 +0000
@@ -121,6 +121,45 @@
     _CS = 1;
 #endif
 }
+unsigned int SPI16::rd_data32_wdummy()
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    unsigned int r=0;
+    _DC.write(1);; // 1=data
+   
+    r |= _spi.write(0); // we get only 15bit valid, first bit was the dummy cycle
+    r <<= 16;
+    r |= _spi.write(0);
+    r <<= 1; // 32bits are aligned, now collecting bit_0
+    r |= (_spi.write(0) >> 15);
+    // we clocked 15 more bit so ILI waiting for 16th, we need to reset spi bus
+    _CS = 1; // force CS HIG to interupt the cmd
+#ifndef USE_CS //if CS is not used, force fixed LOW again
+    _CS = 0;
+#endif
+    return r;
+}
+unsigned short SPI16::rd_gram()
+{
+#ifdef USE_CS
+    _CS = 0;
+#endif
+    unsigned int r=0;
+    _DC.write(1); // 1=data
+    r |= _spi.write(0); // 16bit, whole first byte is dummy, second is red
+    r <<= 16;
+    r |= _spi.write(0);  
+_CS = 1; // force CS HIG to interupt the "read state"
+#ifndef USE_CS //if CS is not used, force fixed LOW again
+    _CS = 0;
+#endif
+    // gram is 18bit/pixel, if you set 16bit/pixel (cmd 3A), during writing the 16bits are expanded to 18bit
+    // during reading, you read the raw 18bit gram
+    r = RGB18to16((r&0xFC0000)>>16, (r&0xFC00)>>8, r&0xFC);// 18bit pixel, rrrrrr00_gggggg00_bbbbbb00, converted to 16bit
+    return (unsigned short)r;
+}
 void SPI16::hw_reset()
 {
     wait_ms(15);