Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Fork of UniGraphic by
Inits/ILI9341.h
- Committer:
- Geremia
- Date:
- 2015-03-31
- Revision:
- 21:ae0a4eedfc90
- Parent:
- 18:ffa58f1a680a
File content as of revision 21:ae0a4eedfc90:
#ifndef MBED_ILI9341_H #define MBED_ILI9341_H #include "mbed.h" #include "TFT.h" /** Class for ILI9341 tft display controller * to be copypasted and adapted for other controllers */ class ILI9341 : public TFT { public: /** Create a PAR display interface * @param displayproto PAR_8 or PAR_16 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI9341(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 320); /** Create a BUS display interface * @param displayproto BUS_8 or BUS_16 * @param buspins array of PinName to group as Bus * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI9341(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 320); /** Create an SPI display interface * @param displayproto SPI_8 or SPI_16 * @param Hz SPI speed in Hz * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name ,unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 320); protected: /** Init command sequence */ void init(); }; #endif