Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Fork of UniGraphic by
Inits/UC1608.h
- Committer:
- dreschpe
- Date:
- 2015-02-17
- Revision:
- 9:1749ae993cfe
- Parent:
- 1:ff019d22b275
- Child:
- 18:ffa58f1a680a
File content as of revision 9:1749ae993cfe:
#ifndef MBED_UC1608_H #define MBED_UC1608_H #include "mbed.h" #include "LCD.h" /** Class for UC1608 display controller * to be copypasted and adapted for other controllers */ class UC1608 : public LCD { public: /** Create a PAR display interface * @param displayproto only supports PAR_8 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ UC1608(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 120); /** Create an SPI display interface * @param displayproto only supports SPI_8 * @param Hz SPI speed in Hz * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ UC1608(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 120); /** set the contrast of the screen * @note here overrided because of not standard command * @param o contrast 0-63 */ virtual void set_contrast(int o); /** Set ChipSelect high or low * @note here overriding the std one, cause CS inverted * @param enable 0/1 */ virtual void BusEnable(bool enable); protected: /** Init command sequence */ void init(); /** set mirror mode * @note here overriding the LCD class default one because of not standard commands * @param mode NONE, X, Y, XY */ virtual void mirrorXY(mirror_t mode); }; #endif