Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Fork of UniGraphic by
Inits/ILI9486.h
- Committer:
- dreschpe
- Date:
- 2015-02-17
- Revision:
- 9:1749ae993cfe
- Parent:
- 4:12ba0ecc2c1f
- Child:
- 18:ffa58f1a680a
File content as of revision 9:1749ae993cfe:
#ifndef MBED_ILI9486_H #define MBED_ILI9486_H #include "mbed.h" #include "TFT.h" /** Class for ILI9486 tft display controller * to be copypasted and adapted for other controllers */ class ILI9486 : public TFT { public: /** Create a PAR display interface * @param displayproto only supports PAR_8 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI9486(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 320, unsigned int LCDSIZE_Y = 480); /** Create an SPI display interface * @param displayproto only supports SPI_8 * @param Hz SPI speed in Hz * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ ILI9486(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name, unsigned int LCDSIZE_X = 320, unsigned int LCDSIZE_Y= 480); protected: /** Init command sequence */ void init(); }; #endif