Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Fork of UniGraphic by
Inits/TFT_MIPI.h
- Committer:
- Geremia
- Date:
- 2015-02-15
- Revision:
- 4:12ba0ecc2c1f
- Child:
- 9:1749ae993cfe
File content as of revision 4:12ba0ecc2c1f:
#ifndef MBED_TFT_MIPI_H #define MBED_TFT_MIPI_H #include "mbed.h" #include "TFT.h" /** Class for (quite)standard MIPI-DBI TypeB (parallel) and TypeC (spi) TFT display controller * for Ilitek ILI9481, Renesas R61581, Raydium RM68042 * to be copypasted and adapted for other controllers */ class TFT_MIPI : public TFT { public: /** Create a PAR display interface * @param displayproto only supports PAR_8 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface */ TFT_MIPI(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name); /** Create an SPI display interface * @param displayproto only supports SPI_8 * @param Hz SPI speed in Hz * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param name The name used by the parent class to access the interface */ TFT_MIPI(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name); protected: /** Init command sequence */ void init(); }; #endif