Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Fork of UniGraphic by GraphicsDisplay

Revision:
0:75ec1b3cde17
Child:
1:ff019d22b275
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Protocols/Protocols.h	Thu Feb 12 22:22:47 2015 +0000
@@ -0,0 +1,64 @@
+/** @file Protocols.h
+*/
+#ifndef Protocols_H
+#define Protocols_H
+
+#include "mbed.h"
+
+/** Protocol types
+*/
+enum proto_t {
+    PAR_8   /**< Parallel 8bit, pins 0 to 7 */
+    ,PAR_16 /**< Parallel 16bit, pins 0 to 15 */
+    ,SPI_8  /**< SPI 8bit */
+    ,SPI_16 /**< SPI 16bit */
+};
+
+
+/** Abstract class for spi and parallel protocols
+*/
+class Protocols
+{
+ public:
+    
+    /** Send command byte to display controller 
+    *
+    * @param cmd: byte to send  
+    *
+    */   
+    virtual void wr_cmd(unsigned char cmd) = 0;
+    
+    /** Send data byte to display controller 
+    *
+    * @param data8: byte to send   
+    *
+    */   
+    virtual void wr_data8(unsigned char data8) = 0;
+    
+    /** Send same data byte to display controller multiple times
+    *
+    * @param data8: byte to send
+    * @param count: how many
+    *
+    */   
+    virtual void wr_data8(unsigned char data8, unsigned int count) = 0;
+    
+    /** Send array of data bytes to display controller
+    *
+    * @param data8: unsigned char data array
+    * @param lenght: lenght of array
+    *
+    */   
+    virtual void wr_data8buf(unsigned char* data8, unsigned int lenght) = 0;
+    
+    /** HW reset sequence (without display init commands)   
+    */
+    virtual void hw_reset() = 0;
+    
+    /** Set ChipSelect high or low
+    * @param enable 0/1   
+    */
+    virtual void BusEnable(bool enable) = 0;
+
+};
+#endif
\ No newline at end of file