David DiCarlo / mbed-src-KL05Z-smart-sensor

Fork of mbed for KL05Z based smart sensor which has no crystal on the board, so MCG FEI mode is required.

Dependents:   smart-sensor-KL05Z-debug

Fork of mbed-src by Ermanno Brusadin

hal/gpio_api.h@1:da408b460382, 2018-01-29 (annotated)

Committer:
r14793
Date:
Mon Jan 29 15:38:37 2018 +0000
Revision:
1:da408b460382
Parent:
0:0a673c671a56 
changed KL05 MCG mode to FEI for smart sensor boards (no crystal)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ebrus 0:0a673c671a56 1 /* mbed Microcontroller Library
ebrus 0:0a673c671a56 2 * Copyright (c) 2006-2013 ARM Limited
ebrus 0:0a673c671a56 3 *
ebrus 0:0a673c671a56 4 * Licensed under the Apache License, Version 2.0 (the "License");
ebrus 0:0a673c671a56 5 * you may not use this file except in compliance with the License.
ebrus 0:0a673c671a56 6 * You may obtain a copy of the License at
ebrus 0:0a673c671a56 7 *
ebrus 0:0a673c671a56 8 * http://www.apache.org/licenses/LICENSE-2.0
ebrus 0:0a673c671a56 9 *
ebrus 0:0a673c671a56 10 * Unless required by applicable law or agreed to in writing, software
ebrus 0:0a673c671a56 11 * distributed under the License is distributed on an "AS IS" BASIS,
ebrus 0:0a673c671a56 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
ebrus 0:0a673c671a56 13 * See the License for the specific language governing permissions and
ebrus 0:0a673c671a56 14 * limitations under the License.
ebrus 0:0a673c671a56 15 */
ebrus 0:0a673c671a56 16 #ifndef MBED_GPIO_API_H
ebrus 0:0a673c671a56 17 #define MBED_GPIO_API_H
ebrus 0:0a673c671a56 18
ebrus 0:0a673c671a56 19 #include "device.h"
ebrus 0:0a673c671a56 20
ebrus 0:0a673c671a56 21 #ifdef __cplusplus
ebrus 0:0a673c671a56 22 extern "C" {
ebrus 0:0a673c671a56 23 #endif
ebrus 0:0a673c671a56 24
ebrus 0:0a673c671a56 25 /* Set the given pin as GPIO
ebrus 0:0a673c671a56 26 * @param pin The pin to be set as GPIO
ebrus 0:0a673c671a56 27 * @return The GPIO port mask for this pin
ebrus 0:0a673c671a56 28 **/
ebrus 0:0a673c671a56 29 uint32_t gpio_set(PinName pin);
ebrus 0:0a673c671a56 30
ebrus 0:0a673c671a56 31 /* GPIO object */
ebrus 0:0a673c671a56 32 void gpio_init(gpio_t *obj, PinName pin);
ebrus 0:0a673c671a56 33
ebrus 0:0a673c671a56 34 void gpio_mode (gpio_t *obj, PinMode mode);
ebrus 0:0a673c671a56 35 void gpio_dir (gpio_t *obj, PinDirection direction);
ebrus 0:0a673c671a56 36
ebrus 0:0a673c671a56 37 void gpio_write(gpio_t *obj, int value);
ebrus 0:0a673c671a56 38 int gpio_read (gpio_t *obj);
ebrus 0:0a673c671a56 39
ebrus 0:0a673c671a56 40 // the following set of functions are generic and are implemented in the common gpio.c file
ebrus 0:0a673c671a56 41 void gpio_init_in(gpio_t* gpio, PinName pin);
ebrus 0:0a673c671a56 42 void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode);
ebrus 0:0a673c671a56 43 void gpio_init_out(gpio_t* gpio, PinName pin);
ebrus 0:0a673c671a56 44 void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value);
ebrus 0:0a673c671a56 45 void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value);
ebrus 0:0a673c671a56 46
ebrus 0:0a673c671a56 47 #ifdef __cplusplus
ebrus 0:0a673c671a56 48 }
ebrus 0:0a673c671a56 49 #endif
ebrus 0:0a673c671a56 50
ebrus 0:0a673c671a56 51 #endif