Diff: main_backup_reading_OK.txt

Revision:

2:7d005ac4146f

diff -r 02f411fefe6f -r 7d005ac4146f main_backup_reading_OK.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main_backup_reading_OK.txt	Fri Apr 12 06:56:27 2019 +0000
@@ -0,0 +1,111 @@
+#include "mbed.h"
+#include "max86150.h"
+#include "i2c_functions.h"
+
+DigitalOut myled(P7_1);
+Serial myPC(USBTX, USBRX);   // Initiating Serial Console communication
+
+void device_data_read(void);
+
+    
+int main()
+{
+    int i=0, j=0;
+
+    i2c_freq(100000);
+    myPC.baud(57600);
+
+    while (i++<1) {
+        myled = !myled;
+        wait(1);
+
+        char data_read[9];
+        char data_write[2];
+
+        // enable()
+        data_write[0] = 0x01;
+        i2c_write(0xBC, 0x0D, data_write,1);    // reset        
+        data_write[0] = 0x0C;
+        i2c_write(0xBC, 0x08, data_write,1);    // FIFO roll ON
+        data_write[0] = 0x21;
+        i2c_write(0xBC, 0x09, data_write,1);    // FDx
+        data_write[0] = 0x00;
+        i2c_write(0xBC, 0x0A, data_write,1);    // FDx
+        data_write[0] = 0xDB;
+        i2c_write(0xBC, 0x0E, data_write,1);    // PPG_ADC_RANGE PPG_SR:100SpS, PPG_LED_PW:400uS
+        data_write[0] = 0x10;
+        i2c_write(0xBC, 0x11, data_write,1);    //LED current - IR
+        data_write[0] = 0x55;
+        i2c_write(0xBC, 0x12, data_write,1);    //LED current - Red
+        data_write[0] = 0x10;
+        i2c_write(0xBC, 0x15, data_write,1);    //Pilot_PA   
+        data_write[0] = 0x04;
+        i2c_write(0xBC, 0x10, data_write,1);    //PROX_INT_THRESH    
+          
+        //data_write[0] = 0x40;
+        //i2c_write(0xBC, 0x02, data_write,1);    //PPG_RDY_EN  
+           
+        data_write[0] = 0x10;
+        i2c_write(0xBC, 0x02, data_write,1);    //[4] PROX_INT_EN    
+        data_write[0] = 0x04;
+        i2c_write(0xBC, 0x0D, data_write,1);    //FIFO start
+
+        myPC.printf("\r\nStart reading...");
+        while (j++<15) {
+            myPC.printf("\r\n#%d, ", j);
+            
+            i2c_read(0xBC, 0x00, data_read, 2);
+            while(data_read[0]==0x00) {  
+                myPC.printf("\r\nReg 0x00 = 0x%x, wait for INT", data_read[0]);   
+                i2c_read(0xBC, 0x00, data_read, 2);            
+            }    
+            if (data_read[0] == 0x80) { // FIFO almost full
+                myPC.printf("\r\nReg 0x00 = 0x%x, read data", data_read[0]);
+                device_data_read();
+            }else if(data_read[0] == 0x10) {  // Prox_INT
+                myPC.printf("\r\nReg 0x00 = 0x%x, Proximity Interrupt", data_read[0]);
+                data_write[0] = 0x00;
+                i2c_write(0xBC, 0x0D, data_write,1);
+                data_write[0] = 0x04;
+                i2c_write(0xBC, 0x0D, data_write,1);   
+                data_write[0] = 0x80;
+                i2c_write(0xBC, 0x02, data_write,1); 
+            }else if(data_read[0] == 0x01) {  // Power Ready
+                myPC.printf("\r\nReg 0x00 = 0x%x, Power Ready", data_read[0]); 
+            }else
+                myPC.printf("\r\nReg 0x00 = 0x%x, other INT event...", data_read[0]); 
+        }
+    }
+}
+
+void device_data_read(void)
+{
+    char wr_ptr;
+    char rd_ptr;
+    char flag = 0;
+    char dataBuff[32*2*3];
+    int sampleCnt = 0;
+    int red[32], ir[32], ecg[32];
+    int i;
+    
+    i2c_read(0xBC, 0x04, &wr_ptr, 1);
+    i2c_read(0xBC, 0x06, &rd_ptr, 1);
+    
+    if(wr_ptr > rd_ptr)
+        sampleCnt = wr_ptr - rd_ptr;
+    else
+        sampleCnt = 32 + wr_ptr - rd_ptr;
+    i2c_read(0xBC, 0x07, dataBuff, sampleCnt*2*3);
+    
+    for(i=0;i<sampleCnt;i++){
+        ir[i] = ((dataBuff[i*6+0] << 16) + (dataBuff[i*6+1] << 8) + dataBuff[i*6+2]) & 0x7ffff;        
+        red[i] = ((dataBuff[i*6+3] << 16) + (dataBuff[i*6+4] << 8) + dataBuff[i*6+5]) & 0x7ffff;
+        myPC.printf("\r\nIR = %d, RED = %d", ir[i], red[i]);
+        if(ir[i]<0x04*2048*0.8){
+            flag = 0x10;    // PROX_ON    
+            myPC.printf("\r\nIR = %d Enter PROX mode", ir[i]);
+        }
+    }
+    if(flag!=0)
+        i2c_write(0xBC, 0x02, &flag,1);    // PROX_INT_EN
+}  
\ No newline at end of file