h
Fork of MPL3115A2 by
Diff: MPL3115A2.h
- Revision:
- 1:a011ae93a350
- Parent:
- 0:beb43bc3d6d4
- Child:
- 2:2ebc9c0d4a54
--- a/MPL3115A2.h Tue Apr 01 21:35:23 2014 +0000 +++ b/MPL3115A2.h Wed Apr 02 11:12:00 2014 +0000 @@ -19,7 +19,7 @@ Be sure to download the DATASHEET and the App Note AN4519. - This libraray was created using the mbed NXP LPC11U24. Pins + This library was created using the mbed NXP LPC11U24. Pins p27 and p28 were used for the I2C functions. Be sure to install 1K pull-up resistors on both lines. Also, if you're not using the SparkFun breakout board, be sure to use the right caps on @@ -29,7 +29,7 @@ the Arduino written by Nathan Seidle at SparkFun. I copied some of the number crunching routines and tried to follow his style of coding for the library. That way users of Arduinos - cound step into this library a little easier. + could step into this library a little easier. */ @@ -131,10 +131,10 @@ void setModeActive(); // Activates the sensor to start taking measurements. // When calling any of these methods, be sure to put the sensor in standby mode first. - void setModeBarometer(); // Puts the sensor into barometric mode - void setModeAltimeter(); // Puts the sensor into altimeter mode - void setOversampleRate(char); // Sets the number of samples from 1 to 128. - void enableEventFlags(); // Sets the all event flags. + void setModeBarometer(); // Puts the sensor into barometric mode + void setModeAltimeter(); // Puts the sensor into altimeter mode + void setOversampleRate(char rate); // Sets the number of samples from 1 to 128. + void enableEventFlags(); // Sets all the event flags. private: I2C *_i2c; // The I2C object we use to communicate with the sensor. It is not part