Paul Paterson
mbed library sources, include can_api for nucleo-f091rc
Dependents: CanNucleoF0_example
Fork of
mbed-src
by 
mbed official
Diff: vendor/NXP/LPC11U24/cmsis/system_LPC11Uxx.c
- Revision:
- 13:0645d8841f51
- Parent:
- 12:5fa2273de5db
- Child:
- 14:096882eb0961
--- a/vendor/NXP/LPC11U24/cmsis/system_LPC11Uxx.c Wed Jul 24 11:11:21 2013 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,450 +0,0 @@
-/******************************************************************************
- * @file system_LPC11Uxx.c
- * @purpose CMSIS Cortex-M3 Device Peripheral Access Layer Source File
- * for the NXP LPC13xx Device Series
- * @version V1.10
- * @date 24. November 2010
- *
- * @note
- * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#include <stdint.h>
-#include "LPC11Uxx.h"
-
-/*
-//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
-*/
-
-/*--------------------- Clock Configuration ----------------------------------
-//
-// <e> Clock Configuration
-// <h> System Oscillator Control Register (SYSOSCCTRL)
-// <o1.0> BYPASS: System Oscillator Bypass Enable
-// <i> If enabled then PLL input (sys_osc_clk) is fed
-// <i> directly from XTALIN and XTALOUT pins.
-// <o1.9> FREQRANGE: System Oscillator Frequency Range
-// <i> Determines frequency range for Low-power oscillator.
-// <0=> 1 - 20 MHz
-// <1=> 15 - 25 MHz
-// </h>
-//
-// <h> Watchdog Oscillator Control Register (WDTOSCCTRL)
-// <o2.0..4> DIVSEL: Select Divider for Fclkana
-// <i> wdt_osc_clk = Fclkana/ (2 × (1 + DIVSEL))
-// <0-31>
-// <o2.5..8> FREQSEL: Select Watchdog Oscillator Analog Output Frequency (Fclkana)
-// <0=> Undefined
-// <1=> 0.5 MHz
-// <2=> 0.8 MHz
-// <3=> 1.1 MHz
-// <4=> 1.4 MHz
-// <5=> 1.6 MHz
-// <6=> 1.8 MHz
-// <7=> 2.0 MHz
-// <8=> 2.2 MHz
-// <9=> 2.4 MHz
-// <10=> 2.6 MHz
-// <11=> 2.7 MHz
-// <12=> 2.9 MHz
-// <13=> 3.1 MHz
-// <14=> 3.2 MHz
-// <15=> 3.4 MHz
-// </h>
-//
-// <h> System PLL Control Register (SYSPLLCTRL)
-// <i> F_clkout = M * F_clkin = F_CCO / (2 * P)
-// <i> F_clkin must be in the range of 10 MHz to 25 MHz
-// <i> F_CCO must be in the range of 156 MHz to 320 MHz
-// <o3.0..4> MSEL: Feedback Divider Selection
-// <i> M = MSEL + 1
-// <0-31>
-// <o3.5..6> PSEL: Post Divider Selection
-// <0=> P = 1
-// <1=> P = 2
-// <2=> P = 4
-// <3=> P = 8
-// </h>
-//
-// <h> System PLL Clock Source Select Register (SYSPLLCLKSEL)
-// <o4.0..1> SEL: System PLL Clock Source
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> Reserved
-// <3=> Reserved
-// </h>
-//
-// <h> Main Clock Source Select Register (MAINCLKSEL)
-// <o5.0..1> SEL: Clock Source for Main Clock
-// <0=> IRC Oscillator
-// <1=> Input Clock to System PLL
-// <2=> WDT Oscillator
-// <3=> System PLL Clock Out
-// </h>
-//
-// <h> System AHB Clock Divider Register (SYSAHBCLKDIV)
-// <o6.0..7> DIV: System AHB Clock Divider
-// <i> Divides main clock to provide system clock to core, memories, and peripherals.
-// <i> 0 = is disabled
-// <0-255>
-// </h>
-//
-// <h> USB PLL Control Register (USBPLLCTRL)
-// <i> F_clkout = M * F_clkin = F_CCO / (2 * P)
-// <i> F_clkin must be in the range of 10 MHz to 25 MHz
-// <i> F_CCO must be in the range of 156 MHz to 320 MHz
-// <o7.0..4> MSEL: Feedback Divider Selection
-// <i> M = MSEL + 1
-// <0-31>
-// <o7.5..6> PSEL: Post Divider Selection
-// <0=> P = 1
-// <1=> P = 2
-// <2=> P = 4
-// <3=> P = 8
-// </h>
-//
-// <h> USB PLL Clock Source Select Register (USBPLLCLKSEL)
-// <o8.0..1> SEL: USB PLL Clock Source
-// <i> USB PLL clock source must be switched to System Oscillator for correct USB operation
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> Reserved
-// <3=> Reserved
-// </h>
-//
-// <h> USB Clock Source Select Register (USBCLKSEL)
-// <o9.0..1> SEL: System PLL Clock Source
-// <0=> USB PLL out
-// <1=> Main clock
-// <2=> Reserved
-// <3=> Reserved
-// </h>
-//
-// <h> USB Clock Divider Register (USBCLKDIV)
-// <o10.0..7> DIV: USB Clock Divider
-// <i> Divides USB clock to 48 MHz.
-// <i> 0 = is disabled
-// <0-255>
-// </h>
-// </e>
-*/
-#define CLOCK_SETUP 1
-#define SYSOSCCTRL_Val 0x00000000 // Reset: 0x000
-#define WDTOSCCTRL_Val 0x00000000 // Reset: 0x000
-#define SYSPLLCTRL_Val 0x00000023 // Reset: 0x000
-#define SYSPLLCLKSEL_Val 0x00000001 // Reset: 0x000
-#define MAINCLKSEL_Val 0x00000003 // Reset: 0x000
-#define SYSAHBCLKDIV_Val 0x00000001 // Reset: 0x001
-#define USBPLLCTRL_Val 0x00000023 // Reset: 0x000
-#define USBPLLCLKSEL_Val 0x00000001 // Reset: 0x000
-#define USBCLKSEL_Val 0x00000000 // Reset: 0x000
-#define USBCLKDIV_Val 0x00000001 // Reset: 0x001
-
-/*
-//-------- <<< end of configuration section >>> ------------------------------
-*/
-
-/*----------------------------------------------------------------------------
- Check the register settings
- *----------------------------------------------------------------------------*/
-#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
-#define CHECK_RSVD(val, mask) (val & mask)
-
-/* Clock Configuration -------------------------------------------------------*/
-#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
- #error "SYSOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
- #error "WDTOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
- #error "SYSPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
- #error "SYSPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
- #error "MAINCLKSEL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
- #error "SYSAHBCLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((USBPLLCLKSEL_Val), 0, 1))
- #error "USBPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((USBPLLCTRL_Val), ~0x000001FF))
- #error "USBPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((USBCLKSEL_Val), 0, 1))
- #error "USBCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((USBCLKDIV_Val), 0, 255))
- #error "USBCLKDIV: Value out of range!"
-#endif
-
-
-/*----------------------------------------------------------------------------
- DEFINES
- *----------------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------------
- Define clocks
- *----------------------------------------------------------------------------*/
-#define __XTAL (12000000UL) /* Oscillator frequency */
-#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
-#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
-
-
-#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
-#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
-
-#if (CLOCK_SETUP) /* Clock Setup */
- #if (__FREQSEL == 0)
- #define __WDT_OSC_CLK ( 0) /* undefined */
- #elif (__FREQSEL == 1)
- #define __WDT_OSC_CLK ( 500000 / __DIVSEL)
- #elif (__FREQSEL == 2)
- #define __WDT_OSC_CLK ( 800000 / __DIVSEL)
- #elif (__FREQSEL == 3)
- #define __WDT_OSC_CLK (1100000 / __DIVSEL)
- #elif (__FREQSEL == 4)
- #define __WDT_OSC_CLK (1400000 / __DIVSEL)
- #elif (__FREQSEL == 5)
- #define __WDT_OSC_CLK (1600000 / __DIVSEL)
- #elif (__FREQSEL == 6)
- #define __WDT_OSC_CLK (1800000 / __DIVSEL)
- #elif (__FREQSEL == 7)
- #define __WDT_OSC_CLK (2000000 / __DIVSEL)
- #elif (__FREQSEL == 8)
- #define __WDT_OSC_CLK (2200000 / __DIVSEL)
- #elif (__FREQSEL == 9)
- #define __WDT_OSC_CLK (2400000 / __DIVSEL)
- #elif (__FREQSEL == 10)
- #define __WDT_OSC_CLK (2600000 / __DIVSEL)
- #elif (__FREQSEL == 11)
- #define __WDT_OSC_CLK (2700000 / __DIVSEL)
- #elif (__FREQSEL == 12)
- #define __WDT_OSC_CLK (2900000 / __DIVSEL)
- #elif (__FREQSEL == 13)
- #define __WDT_OSC_CLK (3100000 / __DIVSEL)
- #elif (__FREQSEL == 14)
- #define __WDT_OSC_CLK (3200000 / __DIVSEL)
- #else
- #define __WDT_OSC_CLK (3400000 / __DIVSEL)
- #endif
-
- /* sys_pllclkin calculation */
- #if ((SYSPLLCLKSEL_Val & 0x03) == 0)
- #define __SYS_PLLCLKIN (__IRC_OSC_CLK)
- #elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
- #define __SYS_PLLCLKIN (__SYS_OSC_CLK)
- #else
- #define __SYS_PLLCLKIN (0)
- #endif
-
- #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
-
- /* main clock calculation */
- #if ((MAINCLKSEL_Val & 0x03) == 0)
- #define __MAIN_CLOCK (__IRC_OSC_CLK)
- #elif ((MAINCLKSEL_Val & 0x03) == 1)
- #define __MAIN_CLOCK (__SYS_PLLCLKIN)
- #elif ((MAINCLKSEL_Val & 0x03) == 2)
- #if (__FREQSEL == 0)
- #error "MAINCLKSEL: WDT Oscillator selected but FREQSEL is undefined!"
- #else
- #define __MAIN_CLOCK (__WDT_OSC_CLK)
- #endif
- #elif ((MAINCLKSEL_Val & 0x03) == 3)
- #define __MAIN_CLOCK (__SYS_PLLCLKOUT)
- #else
- #define __MAIN_CLOCK (0)
- #endif
-
- #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
-
-#else
- #define __SYSTEM_CLOCK (__IRC_OSC_CLK)
-#endif // CLOCK_SETUP
-
-
-/*----------------------------------------------------------------------------
- Clock Variable definitions
- *----------------------------------------------------------------------------*/
-uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
-
-
-/*----------------------------------------------------------------------------
- Clock functions
- *----------------------------------------------------------------------------*/
-void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
-{
- uint32_t wdt_osc = 0;
-
- /* Determine clock frequency according to clock register values */
- switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
- case 0: wdt_osc = 0; break;
- case 1: wdt_osc = 500000; break;
- case 2: wdt_osc = 800000; break;
- case 3: wdt_osc = 1100000; break;
- case 4: wdt_osc = 1400000; break;
- case 5: wdt_osc = 1600000; break;
- case 6: wdt_osc = 1800000; break;
- case 7: wdt_osc = 2000000; break;
- case 8: wdt_osc = 2200000; break;
- case 9: wdt_osc = 2400000; break;
- case 10: wdt_osc = 2600000; break;
- case 11: wdt_osc = 2700000; break;
- case 12: wdt_osc = 2900000; break;
- case 13: wdt_osc = 3100000; break;
- case 14: wdt_osc = 3200000; break;
- case 15: wdt_osc = 3400000; break;
- }
- wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
-
- switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* Input Clock to System PLL */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* System oscillator */
- SystemCoreClock = __SYS_OSC_CLK;
- break;
- case 2: /* Reserved */
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- case 2: /* WDT Oscillator */
- SystemCoreClock = wdt_osc;
- break;
- case 3: /* System PLL Clock Out */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __IRC_OSC_CLK;
- } else {
- SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 1: /* System oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __SYS_OSC_CLK;
- } else {
- SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 2: /* Reserved */
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- }
-
- SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
-
-}
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System.
- */
-void SystemInit (void) {
- volatile uint32_t i;
-
-#if (CLOCK_SETUP) /* Clock Setup */
-
-#if ((SYSPLLCLKSEL_Val & 0x03) == 1)
- LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
- LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
- for (i = 0; i < 200; i++) __NOP();
-#endif
-
- LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
- LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */
- LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->SYSPLLCLKUEN = 0x01;
- while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */
-#if ((MAINCLKSEL_Val & 0x03) == 3) /* Main Clock is PLL Out */
- LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
- while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
-#endif
-
-#if (((MAINCLKSEL_Val & 0x03) == 2) )
- LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
- for (i = 0; i < 200; i++) __NOP();
-#endif
-
- LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
- LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */
- LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->MAINCLKUEN = 0x01;
- while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */
-
- LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
-
-#if ((USBCLKDIV_Val & 0x1FF) != 0) /* USB clock is used */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 10); /* Power-up USB PHY */
-
-#if ((USBCLKSEL_Val & 0x003) == 0) /* USB clock is USB PLL out */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 8); /* Power-up USB PLL */
- LPC_SYSCON->USBPLLCLKSEL = USBPLLCLKSEL_Val; /* Select PLL Input */
- LPC_SYSCON->USBPLLCLKUEN = 0x01; /* Update Clock Source */
- LPC_SYSCON->USBPLLCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->USBPLLCLKUEN = 0x01;
- while (!(LPC_SYSCON->USBPLLCLKUEN & 0x01)); /* Wait Until Updated */
- LPC_SYSCON->USBPLLCTRL = USBPLLCTRL_Val;
- while (!(LPC_SYSCON->USBPLLSTAT & 0x01)); /* Wait Until PLL Locked */
- LPC_SYSCON->USBCLKSEL = 0x00; /* Select USB PLL */
-#endif
-
- LPC_SYSCON->USBCLKSEL = USBCLKSEL_Val; /* Select USB Clock */
- LPC_SYSCON->USBCLKDIV = USBCLKDIV_Val; /* Set USB clock divider */
-
-#else /* USB clock is not used */
- LPC_SYSCON->PDRUNCFG |= (1 << 10); /* Power-down USB PHY */
- LPC_SYSCON->PDRUNCFG |= (1 << 8); /* Power-down USB PLL */
-#endif
-
-#endif
-
- /* System clock to the IOCON needs to be enabled or
- most of the I/O related peripherals won't work. */
- LPC_SYSCON->SYSAHBCLKCTRL |= (1<<16);
-}