Pavel Šimík
First test on using mbed library with naked LPC1114 chip on breadboard. Blink LED pin 28, append UART test, procedure putc(), puts(), PWM beep 1kHz on pin 1.
Fork of
lpc1114test
by 
Saudin Dizdarevic
History
append comments
2013-11-09, by psimik [Sat, 09 Nov 2013 22:40:39 +0000] rev 6
append comments
return back PWM to pin1. PWM on pin18 failed, error in MBED library.
2013-11-09, by psimik [Sat, 09 Nov 2013 16:25:45 +0000] rev 5
return back PWM to pin1. PWM on pin18 failed, error in MBED library.
PWM out moved to pin 18.
2013-11-09, by psimik [Sat, 09 Nov 2013 16:00:56 +0000] rev 4
PWM out moved to pin 18.
Append PWM test, connect piezo-buzzer on pin1.
2013-11-09, by psimik [Sat, 09 Nov 2013 15:53:14 +0000] rev 3
Append PWM test, connect piezo-buzzer on pin1.
append UART test
2013-11-09, by psimik [Sat, 09 Nov 2013 13:30:11 +0000] rev 2
append UART test
Naked LPC1114, BIN convert with bit2hex, load with FlashMagic.; Run 1sec blink LED on pin28, UART 115200Bd on pin 16,15; start & loop message via UART, test procedure puts(), putc(). ;
2013-11-09, by psimik [Sat, 09 Nov 2013 13:16:32 +0000] rev 1
Naked LPC1114, BIN convert with bit2hex, load with FlashMagic.; Run 1sec blink LED on pin28, UART 115200Bd on pin 16,15; start & loop message via UART, test procedure puts(), putc(). ;
First test
2013-10-31, by sdizdarevic [Thu, 31 Oct 2013 18:48:11 +0000] rev 0
First test