Jens Altenburg
/
Fachbuch_Initialisierungen
Initialisation Nucleo-F446 by Jens Altenburg
oled.h
- Committer:
- prof_al
- Date:
- 2021-03-17
- Revision:
- 0:9b6fbe273511
File content as of revision 0:9b6fbe273511:
#if 1 /** * SSD1306xLED - Library for the SSD1306 based OLED/PLED 128x64 displays * * @author Neven Boyanov * * This is part of the Tinusaur/SSD1306xLED project. * * Copyright (c) 2018 Neven Boyanov, The Tinusaur Team. All Rights Reserved. * Distributed as open source software under MIT License, see LICENSE.txt file. * Retain in your source code the link http://tinusaur.org to the Tinusaur project. * * Source code available at: https://bitbucket.org/tinusaur/ssd1306xled * */ #ifndef SSD1306XLED_H #define SSD1306XLED_H #include "main.h" // ============================================================================ // -----(+)-------------------->-----> [Vcc] Pin 1 on the SSD1306 display board // -----(-)-------------------->-----> [GND] Pin 2 on the SSD1306 display board #define SSD1306_SCL PB2 // ----> [SCL] Pin 3 on the SSD1306 display board #define SSD1306_SDA PB0 // ----> [SDA] Pin 4 on the SSD1306 display board #define SSD1306_SADDR 0x78 // Display IC2 slave address, default 0x78 // ---------------------------------------------------------------------------- #define ssd1306_clear() ssd1306_fill4(0, 0, 0, 0) #define ssd1306_fill(p) ssd1306_fill4(p, p, p, p) #define ssd1306_fill2(p1, p2) ssd1306_fill4(p1, p2, p1, p2) // ---------------------------------------------------------------------------- //void ssd1306_init(void); void vOledInit(void); void ssd1306_setpos(byte x, byte y); void ssd1306_fill4(byte, byte, byte, byte); void ssd1306tx_char(byte ); void ssd1306tx_large(byte, byte, byte ); // ============================================================================ #endif #endif