MBED-DEV only fro Nucleo STM32F303K8T6
Fork of mbed-dev by
targets/TARGET_STM/TARGET_STM32F3/rtc_api.c
- Committer:
- pravinautosys
- Date:
- 2016-11-19
- Revision:
- 151:acf04f8e7d03
- Parent:
- 149:156823d33999
File content as of revision 151:acf04f8e7d03:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2016, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #include "rtc_api.h" #include "rtc_api_hal.h" #if DEVICE_RTC #include "mbed_error.h" #if RTC_LSI static int rtc_inited = 0; #endif static RTC_HandleTypeDef RtcHandle; #if RTC_LSI #define RTC_CLOCK LSI_VALUE #else #define RTC_CLOCK LSE_VALUE #endif #if DEVICE_LOWPOWERTIMER #define RTC_ASYNCH_PREDIV ((RTC_CLOCK - 1) / 0x8000) #define RTC_SYNCH_PREDIV (RTC_CLOCK / (RTC_ASYNCH_PREDIV + 1) - 1) #else #define RTC_ASYNCH_PREDIV (0x007F) #define RTC_SYNCH_PREDIV (RTC_CLOCK / (RTC_ASYNCH_PREDIV + 1) - 1) #endif #if DEVICE_LOWPOWERTIMER static void (*irq_handler)(void); static void RTC_IRQHandler(); #endif void rtc_init(void) { RCC_OscInitTypeDef RCC_OscInitStruct; #if RTC_LSI if (rtc_inited) return; rtc_inited = 1; #endif RtcHandle.Instance = RTC; #if !RTC_LSI // Enable LSE Oscillator RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */ RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { // Connect LSE to RTC __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE); } else { error("RTC error: LSE clock initialization failed."); } #else // Enable Power clock __PWR_CLK_ENABLE(); // Enable access to Backup domain HAL_PWR_EnableBkUpAccess(); // Reset Backup domain __HAL_RCC_BACKUPRESET_FORCE(); __HAL_RCC_BACKUPRESET_RELEASE(); // Enable LSI clock RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured! RCC_OscInitStruct.LSEState = RCC_LSE_OFF; RCC_OscInitStruct.LSIState = RCC_LSI_ON; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { error("RTC error: LSI clock initialization failed."); } // Connect LSI to RTC __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI); #endif // Enable RTC __HAL_RCC_RTC_ENABLE(); RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24; RtcHandle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; RtcHandle.Init.SynchPrediv = RTC_SYNCH_PREDIV; RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE; RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; if (HAL_RTC_Init(&RtcHandle) != HAL_OK) { error("RTC error: RTC initialization failed."); } #if DEVICE_LOWPOWERTIMER #if RTC_LSI rtc_write(0); #else if (!rtc_isenabled()) { rtc_write(0); } #endif NVIC_ClearPendingIRQ(RTC_WKUP_IRQn); NVIC_DisableIRQ(RTC_WKUP_IRQn); NVIC_SetVector(RTC_WKUP_IRQn, (uint32_t)RTC_IRQHandler); NVIC_EnableIRQ(RTC_WKUP_IRQn); #endif } void rtc_free(void) { #if RTC_LSI // Enable Power clock __PWR_CLK_ENABLE(); // Enable access to Backup domain HAL_PWR_EnableBkUpAccess(); // Reset Backup domain __HAL_RCC_BACKUPRESET_FORCE(); __HAL_RCC_BACKUPRESET_RELEASE(); // Disable access to Backup domain HAL_PWR_DisableBkUpAccess(); #endif // Disable LSI and LSE clocks RCC_OscInitTypeDef RCC_OscInitStruct; RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; RCC_OscInitStruct.LSIState = RCC_LSI_OFF; RCC_OscInitStruct.LSEState = RCC_LSE_OFF; HAL_RCC_OscConfig(&RCC_OscInitStruct); #if RTC_LSI rtc_inited = 0; #endif } int rtc_isenabled(void) { #if RTC_LSI return rtc_inited; #else if ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) return 1; else return 0; #endif } /* RTC Registers RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday RTC_Month 1=january, 2=february, ..., 12=december RTC_Date day of the month 1-31 RTC_Year year 0-99 struct tm tm_sec seconds after the minute 0-61 tm_min minutes after the hour 0-59 tm_hour hours since midnight 0-23 tm_mday day of the month 1-31 tm_mon months since January 0-11 tm_year years since 1900 tm_wday days since Sunday 0-6 tm_yday days since January 1 0-365 tm_isdst Daylight Saving Time flag */ time_t rtc_read(void) { RTC_DateTypeDef dateStruct; RTC_TimeTypeDef timeStruct; struct tm timeinfo; RtcHandle.Instance = RTC; // Read actual date and time // Warning: the time must be read first! HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN); HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN); // Setup a tm structure based on the RTC timeinfo.tm_wday = dateStruct.WeekDay; timeinfo.tm_mon = dateStruct.Month - 1; timeinfo.tm_mday = dateStruct.Date; timeinfo.tm_year = dateStruct.Year + 68; timeinfo.tm_hour = timeStruct.Hours; timeinfo.tm_min = timeStruct.Minutes; timeinfo.tm_sec = timeStruct.Seconds; // Daylight Saving Time information is not available timeinfo.tm_isdst = -1; // Convert to timestamp time_t t = mktime(&timeinfo); return t; } void rtc_write(time_t t) { RTC_DateTypeDef dateStruct; RTC_TimeTypeDef timeStruct; RtcHandle.Instance = RTC; // Convert the time into a tm struct tm *timeinfo = localtime(&t); // Fill RTC structures dateStruct.WeekDay = timeinfo->tm_wday; dateStruct.Month = timeinfo->tm_mon + 1; dateStruct.Date = timeinfo->tm_mday; dateStruct.Year = timeinfo->tm_year - 68; timeStruct.Hours = timeinfo->tm_hour; timeStruct.Minutes = timeinfo->tm_min; timeStruct.Seconds = timeinfo->tm_sec; timeStruct.TimeFormat = RTC_HOURFORMAT_24; timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; timeStruct.StoreOperation = RTC_STOREOPERATION_RESET; // Change the RTC current date/time HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN); HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN); } #if DEVICE_LOWPOWERTIMER static void RTC_IRQHandler() { HAL_RTCEx_WakeUpTimerIRQHandler(&RtcHandle); } void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) { if (irq_handler) { // Fire the user callback irq_handler(); } } void rtc_set_irq_handler(uint32_t handler) { irq_handler = (void (*)(void))handler; } uint32_t rtc_read_subseconds(void) { return 1000000.f * ((double)(RTC_SYNCH_PREDIV - RTC->SSR) / (RTC_SYNCH_PREDIV + 1)); } void rtc_set_wake_up_timer(uint32_t delta) { uint32_t wake_up_counter = delta / (2000000 / RTC_CLOCK); if (HAL_RTCEx_SetWakeUpTimer_IT(&RtcHandle, wake_up_counter, RTC_WAKEUPCLOCK_RTCCLK_DIV2) != HAL_OK) { error("Set wake up timer failed\n"); } } void rtc_deactivate_wake_up_timer(void) { HAL_RTCEx_DeactivateWakeUpTimer(&RtcHandle); } void rtc_synchronize(void) { HAL_RTC_WaitForSynchro(&RtcHandle); } #endif // DEVICE_LOWPOWERTIMER #endif