MBED-DEV only fro Nucleo STM32F303K8T6
Fork of mbed-dev by
targets/TARGET_STM/TARGET_STM32F3/gpio_irq_api.c
- Committer:
- pravinautosys
- Date:
- 2016-11-19
- Revision:
- 151:acf04f8e7d03
- Parent:
- 149:156823d33999
File content as of revision 151:acf04f8e7d03:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #include <stddef.h> #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" #include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1) #define EDGE_FALL (2) #define EDGE_BOTH (3) // Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15) #define CHANNEL_NUM (7) // Max pins for one line (max with EXTI10_15) #define MAX_PIN_LINE (6) typedef struct gpio_channel { uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group } gpio_channel_t; static gpio_channel_t channels[CHANNEL_NUM] = { {.pin_mask = 0}, {.pin_mask = 0}, {.pin_mask = 0}, {.pin_mask = 0}, {.pin_mask = 0}, {.pin_mask = 0}, {.pin_mask = 0} }; // Used to return the index for channels array. static uint32_t pin_base_nr[16] = { // EXTI0 0, // pin 0 // EXTI1 0, // pin 1 // EXTI2 0, // pin 2 // EXTI3 0, // pin 3 // EXTI4 0, // pin 4 // EXTI5_9 0, // pin 5 1, // pin 6 2, // pin 7 3, // pin 8 4, // pin 9 // EXTI10_15 0, // pin 10 1, // pin 11 2, // pin 12 3, // pin 13 4, // pin 14 5 // pin 15 }; static gpio_irq_handler irq_handler; static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line) { gpio_channel_t *gpio_channel = &channels[irq_index]; uint32_t gpio_idx; for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) { uint32_t current_mask = (1 << gpio_idx); if (gpio_channel->pin_mask & current_mask) { // Retrieve the gpio and pin that generate the irq GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]); uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx])); // Clear interrupt flag if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) { __HAL_GPIO_EXTI_CLEAR_FLAG(pin); if (gpio_channel->channel_ids[gpio_idx] == 0) continue; // Check which edge has generated the irq if ((gpio->IDR & pin) == 0) { irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL); } else { irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE); } } } } } // EXTI line 0 static void gpio_irq0(void) { handle_interrupt_in(0, 1); } // EXTI line 1 static void gpio_irq1(void) { handle_interrupt_in(1, 1); } // EXTI line 2 static void gpio_irq2(void) { handle_interrupt_in(2, 1); } // EXTI line 3 static void gpio_irq3(void) { handle_interrupt_in(3, 1); } // EXTI line 4 static void gpio_irq4(void) { handle_interrupt_in(4, 1); } // EXTI lines 5 to 9 static void gpio_irq5(void) { handle_interrupt_in(5, 5); } // EXTI lines 10 to 15 static void gpio_irq6(void) { handle_interrupt_in(6, 6); } extern uint32_t Set_GPIO_Clock(uint32_t port_idx); extern void pin_function_gpiomode(PinName pin, uint32_t gpiomode); int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { IRQn_Type irq_n = (IRQn_Type)0; uint32_t vector = 0; uint32_t irq_index; gpio_channel_t *gpio_channel; uint32_t gpio_idx; if (pin == NC) return -1; uint32_t port_index = STM_PORT(pin); uint32_t pin_index = STM_PIN(pin); // Select irq number and interrupt routine switch (pin_index) { case 0: irq_n = EXTI0_IRQn; vector = (uint32_t)&gpio_irq0; irq_index = 0; break; case 1: irq_n = EXTI1_IRQn; vector = (uint32_t)&gpio_irq1; irq_index = 1; break; case 2: irq_n = EXTI2_TSC_IRQn; vector = (uint32_t)&gpio_irq2; irq_index = 2; break; case 3: irq_n = EXTI3_IRQn; vector = (uint32_t)&gpio_irq3; irq_index = 3; break; case 4: irq_n = EXTI4_IRQn; vector = (uint32_t)&gpio_irq4; irq_index = 4; break; case 5: case 6: case 7: case 8: case 9: irq_n = EXTI9_5_IRQn; vector = (uint32_t)&gpio_irq5; irq_index = 5; break; case 10: case 11: case 12: case 13: case 14: case 15: irq_n = EXTI15_10_IRQn; vector = (uint32_t)&gpio_irq6; irq_index = 6; break; default: error("InterruptIn error: pin not supported.\n"); return -1; } // Enable GPIO clock uint32_t gpio_add = Set_GPIO_Clock(port_index); // Configure GPIO pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0)); // Enable EXTI interrupt NVIC_SetVector(irq_n, vector); NVIC_EnableIRQ(irq_n); // Save informations for future use obj->irq_n = irq_n; obj->irq_index = irq_index; obj->event = EDGE_NONE; obj->pin = pin; gpio_channel = &channels[irq_index]; gpio_idx = pin_base_nr[pin_index]; gpio_channel->pin_mask |= (1 << gpio_idx); gpio_channel->channel_ids[gpio_idx] = id; gpio_channel->channel_gpio[gpio_idx] = gpio_add; gpio_channel->channel_pin[gpio_idx] = pin_index; irq_handler = handler; return 0; } void gpio_irq_free(gpio_irq_t *obj) { gpio_channel_t *gpio_channel = &channels[obj->irq_index]; uint32_t pin_index = STM_PIN(obj->pin); uint32_t gpio_idx = pin_base_nr[pin_index]; gpio_channel->pin_mask &= ~(1 << gpio_idx); gpio_channel->channel_ids[gpio_idx] = 0; gpio_channel->channel_gpio[gpio_idx] = 0; gpio_channel->channel_pin[gpio_idx] = 0; // Disable EXTI line, but don't change pull-up config pin_function_gpiomode(obj->pin, STM_MODE_INPUT); obj->event = EDGE_NONE; } void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { uint32_t mode = STM_MODE_IT_EVT_RESET; if (enable) { if (event == IRQ_RISE) { if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) { mode = STM_MODE_IT_RISING_FALLING; obj->event = EDGE_BOTH; } else { // NONE or RISE mode = STM_MODE_IT_RISING; obj->event = EDGE_RISE; } } if (event == IRQ_FALL) { if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) { mode = STM_MODE_IT_RISING_FALLING; obj->event = EDGE_BOTH; } else { // NONE or FALL mode = STM_MODE_IT_FALLING; obj->event = EDGE_FALL; } } } else { // Disable if (event == IRQ_RISE) { if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) { mode = STM_MODE_IT_FALLING; obj->event = EDGE_FALL; } else { // NONE or RISE mode = STM_MODE_IT_EVT_RESET; obj->event = EDGE_NONE; } } if (event == IRQ_FALL) { if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) { mode = STM_MODE_IT_RISING; obj->event = EDGE_RISE; } else { // NONE or FALL mode = STM_MODE_IT_EVT_RESET; obj->event = EDGE_NONE; } } } pin_function_gpiomode(obj->pin, mode); } void gpio_irq_enable(gpio_irq_t *obj) { NVIC_EnableIRQ(obj->irq_n); } void gpio_irq_disable(gpio_irq_t *obj) { NVIC_DisableIRQ(obj->irq_n); obj->event = EDGE_NONE; }