![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Example showing how to integrate EASE with proximity Sensor and Base board
Dependencies: mbed EsmacatShield X_NUCLEO_6180XA1
Information about Esmacat and EASE is provided in the link below. https://os.mbed.com/users/pratima_hb/code/EASE_Example/wiki/Homepage
Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/pratima_hb/code/EASE_Example/wiki/Hardware-Setup
Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/pratima_hb/code/EASE_Example/wiki/Software
main.cpp
- Committer:
- Davidroid
- Date:
- 2017-03-03
- Revision:
- 3:d3719ebf51c4
- Parent:
- 0:b706d6b7c1d3
- Child:
- 4:84dfc00ae7b3
File content as of revision 3:d3719ebf51c4:
#include "mbed.h" #include "x_nucleo_6180xa1.h" #include <string.h> #include <stdlib.h> #include <stdio.h> #include <assert.h> /* This VL6180X Expansion board test application performs a range measurement and an als measurement in interrupt mode on the onboard embedded top sensor. The board red slider select on the flight the measurement type as ALS or RANGE; the measured data is diplayed on the on bord 4digits display. User Blue button allows to stop current measurement and the entire program releasing all the resources. Reset button is used to restart the program. */ /* Polling operating modes don`t require callback function that handles IRQ Callback IRQ functions are used only for measure that require interrupt. */ /* GetMeasurement is asynchronous! It returns NOT_READY if the measurement value is not ready to be read from the corresponding register. So you need to wait for the result to be ready. */ #define VL6180X_I2C_SDA D14 #define VL6180X_I2C_SCL D15 #define RANGE 0 #define ALS 1 #define DELAY 2000 // 2Sec /* Expansion board */ static X_NUCLEO_6180XA1 *board = NULL; /* Measure data */ MeasureData_t data_sensor_top; /* Operating mode */ OperatingMode operating_mode, prev_operating_mode; enum OpModeIntPoll_t{ PollMeasure, IntMeasure }; /* Flags that handle interrupt request */ bool int_sensor_top = false, int_stop_measure = false; /* ISR callback function of the sensor_top */ void SensorTopIRQ(void) { int_sensor_top = true; board->sensor_top->DisableInterruptMeasureDetectionIRQ(); } /* ISR callback function of the user blue button to stop program */ void StopMeasureIRQ(void) { int_stop_measure = true; } /* On board 4 digit local display refresh */ void DisplayRefresh(OperatingMode op_mode) { char str[5]; if (op_mode==range_continuous_interrupt || op_mode==range_continuous_polling) { if (data_sensor_top.range_mm!=0xFFFFFFFF) { sprintf(str,"%d",data_sensor_top.range_mm); } else { sprintf(str,"%s","----"); } } else if (op_mode==als_continuous_interrupt || op_mode==als_continuous_polling) { if (data_sensor_top.lux!=0xFFFFFFFF) { sprintf(str,"%d",data_sensor_top.lux); } else { sprintf(str,"%s","----"); } } board->display->DisplayString(str, strlen(str)); } /* On board red slider position check */ OperatingMode CheckSlider(enum OpModeIntPoll_t OpMode) { OperatingMode ret; int measure = board->RdSwitch(); switch (OpMode) { case PollMeasure: if (measure==RANGE) { ret = range_continuous_polling; } else if (measure==ALS) { ret = als_continuous_polling; } break; case IntMeasure: if (measure==RANGE) { ret = range_continuous_interrupt; } else if (measure==ALS) { ret = als_continuous_interrupt; } break; } return ret; } /* Print on USB Serial the started OperatingMode */ void PrintStartMessage(OperatingMode op_mode) { if (op_mode==range_continuous_interrupt) { printf("\nStarted range continuous interrupt measure\n\r"); } else if (prev_operating_mode==als_continuous_interrupt) { printf("\nStarted als continuous interrupt measure\n\r"); } } /* Print on USB Serial the stopped OperatingMode */ void PrintStopMessage(OperatingMode op_mode) { if (op_mode==range_continuous_interrupt) { printf("Stopped range continuous interrupt measure\n\r"); } else if (prev_operating_mode==als_continuous_interrupt) { printf("Stopped als continuous interrupt measure\n\r"); } } /* Print on board 4 Digit display the indicated message <= 4 char */ void DisplayMsg(const char * msg) { Timer timer; char str[5]; timer.start(); for (int i=0; i<DELAY; i=timer.read_ms()) { sprintf(str,"%s",msg); board->display->DisplayString(str, strlen(str)); } timer.stop(); } /* Handle continuous ALS or Range measurement. */ void IntContinousALSorRangeMeasure (DevI2C *device_i2c) { int status; /* Creates the 6180XA1 expansion board singleton obj */ #ifdef TARGET_STM32F429 board = X_NUCLEO_6180XA1::Instance(device_i2c, A5, A2, D13, D2); #else board = X_NUCLEO_6180XA1::Instance(device_i2c, A3, A2, D13, D2); #endif DisplayMsg("INT"); /* Init the 6180XA1 expansion board with default values */ status = board->InitBoard(); if (status) { printf("Failed to init board!\n\r"); } /* Check the red slider position for ALS/Range measure */ operating_mode=CheckSlider(IntMeasure); /* Start the measure on sensor top */ status = board->sensor_top->StartMeasurement(operating_mode, SensorTopIRQ, NULL, NULL); if (!status) { prev_operating_mode=operating_mode; PrintStartMessage(operating_mode); while (true) { if (int_sensor_top) { /* 6180 isr was triggered */ int_sensor_top = false; status = board->sensor_top->HandleIRQ(operating_mode, &data_sensor_top); /* handle the isr and read the meaure */ DisplayRefresh(operating_mode); } if (int_stop_measure) { /* Blue Button isr was triggered */ status = board->sensor_top->StopMeasurement(prev_operating_mode); /* stop the measure and exit */ if (!status) { PrintStopMessage(prev_operating_mode); } int_stop_measure = false; printf("\nProgram stopped!\n\n\r"); break; } operating_mode = CheckSlider(IntMeasure); /* check if red slider was moved */ if (operating_mode!=prev_operating_mode) { DisplayRefresh(prev_operating_mode); status = board->sensor_top->StopMeasurement(prev_operating_mode); /* stop the running measure */ if (!status) { PrintStopMessage(prev_operating_mode); } prev_operating_mode = operating_mode; status = board->sensor_top->StartMeasurement(operating_mode, SensorTopIRQ, NULL, NULL); /* start the new measure */ if (!status) { PrintStartMessage(operating_mode); } } else { DisplayRefresh(operating_mode); } } } DisplayMsg("BYE"); } /*=================================== Main ================================== Move the VL6180X Expansion board red slider to switch between ALS or Range measures. Press the blue user button to stop the measurements in progress =============================================================================*/ int main() { #if USER_BUTTON==PC_13 // Cross compiling for Nucleo-F401 InterruptIn stop_button (USER_BUTTON); stop_button.rise (&StopMeasureIRQ); #endif DevI2C *device_i2c = new DevI2C(VL6180X_I2C_SDA, VL6180X_I2C_SCL); /* Start continous measures Interrupt based */ IntContinousALSorRangeMeasure (device_i2c); }