Diff: Receiver.cpp

Revision:

2:9f401852272c

Child:

3:9166a6a2caf3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Receiver.cpp	Mon Jun 01 05:15:30 2015 +0000
@@ -0,0 +1,51 @@
+#include "mbed.h"
+#include "nRF24L01P.h"
+
+Serial pc(USBTX, USBRX); // tx, rx
+
+nRF24L01P my_nrf24l01p(PTD6, PTE3, PTE2, PTB8, PTB9, PTD0);    // mosi, miso, sck, csn, ce, irq
+DigitalOut GreenLED(LED2);
+
+
+int main() {
+    
+    char count[2];
+    char RxDataCnt;
+    char temp;
+
+    my_nrf24l01p.powerUp();
+    my_nrf24l01p.setRfFrequency(2410);
+
+    // Display the (default) setup of the nRF24L01+ chip
+    pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  my_nrf24l01p.getRfFrequency() );
+    pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  my_nrf24l01p.getRfOutputPower() );
+    pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
+    pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
+    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
+
+    pc.printf( "Simple 2 Byte Receiver\r\n" );
+    
+    RxDataCnt = 2;
+    my_nrf24l01p.setTransferSize( RxDataCnt );
+    
+    my_nrf24l01p.setReceiveMode();
+    my_nrf24l01p.enable();
+
+    while (1) {
+
+        // If we've received anything in the nRF24L01+...
+        if ( my_nrf24l01p.readable() ) {
+
+            // ...read the data into the receive buffer
+            temp = my_nrf24l01p.read( NRF24L01P_PIPE_P0, count, RxDataCnt );
+
+
+            pc.printf( "Cnt %d = %d %d\r\n",temp,count[0],count[1]);
+
+
+            // Toggle LED2 (to help debug nRF24L01+ -> Host communication)
+            GreenLED = !GreenLED;
+            wait_ms(10);
+        }
+    }
+}