ヒロキ モリ
DC Motor PositionControl
Dependencies: mbed QEI mbed-rtos motordriver Encoder
Revision 0:bd1837f054f4, committed 2019-06-09
- Comitter:
- porizou3
- Date:
- Sun Jun 09 09:27:44 2019 +0000
- Commit message:
- firstcommit
Changed in this revision
diff -r 000000000000 -r bd1837f054f4 Encoder.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Encoder.lib Sun Jun 09 09:27:44 2019 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/porizou3/code/Encoder/#6d62a5947f59
diff -r 000000000000 -r bd1837f054f4 QEI.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/QEI.lib Sun Jun 09 09:27:44 2019 +0000 @@ -0,0 +1,1 @@ +http://os.mbed.com/users/aberk/code/QEI/#5c2ad81551aa
diff -r 000000000000 -r bd1837f054f4 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sun Jun 09 09:27:44 2019 +0000
@@ -0,0 +1,81 @@
+#include "mbed.h"
+#include "rtos.h"
+
+#include "Encoder.h"
+
+#include "motordriver.h"
+
+#define V_CONTROL_CYCLE 0.01 //速度制御周期[s]
+#define P_CONTROL_CYCLE 0.1 //位置制御周期[s]
+
+#define Kp 0.03 //速度比例ゲイン
+#define Ki 0.578 //速度積分ゲイン
+
+#define Kpp 2.0 //位置比例ゲイン
+
+#define Vmax 8.2 //モータの電源電圧[V]
+#define OMEGA_MAX 400//モータの最大回転速度[rad/s]
+
+DigitalOut led(LED1);
+
+
+
+Serial pc(USBTX, USBRX); // tx, rx
+
+Encoder Enc(p21, p22, 60, 0.001, 0.01);
+Motor motor(p25 , p23 , p24 , 10000);
+
+float accError = 0.0; //偏差の積分値
+float prevError = 0.0; //前回の偏差
+
+float Pref = 0.0; //位置の目標値[rad]
+
+float Vref = 0.0; //速度の目標値[rad/s]
+
+/* 位置制御スレッド */
+void PositionThread(void const *argument) {
+ float P = Enc.getAngle();//角度の値を取得[rad/s]
+
+ float Error = Pref - P;//偏差の計算
+
+
+ Vref = Error * Kpp; //出力速度の計算
+ if(Vref > OMEGA_MAX) Vref = OMEGA_MAX;
+ if(Vref < -OMEGA_MAX) Vref = -OMEGA_MAX;
+}
+
+
+/* 速度制御スレッド */
+void VelocityThread(void const *argument) {
+
+ float V = Enc.getVelocity(); //速度の値を取得[rad/s]
+
+ float Error = Vref - V; //偏差の計算
+
+ accError += (Error + prevError) / 2.0 * V_CONTROL_CYCLE; //偏差の積分値の計算
+
+ float Vout = Kp * Error + Ki * accError; //出力電圧を計算
+
+ motor.rotate(Vout / Vmax); //モータドライバに出力
+
+ prevError = Error; //偏差の更新
+}
+
+int main() {
+
+ //pc.baud(115200);
+
+ RtosTimer Velocity(VelocityThread); //速度制御
+ RtosTimer Position(PositionThread); //位置制御
+
+ Velocity.start(V_CONTROL_CYCLE * 1000);
+ Position.start(P_CONTROL_CYCLE * 1000);
+ //motor.rotate(1.0);
+
+ while(1) {
+ Pref = 2*PI / 4 * 42;
+ wait(1.0);
+ Pref = 0.0;
+ wait(1.0);
+ }
+}
diff -r 000000000000 -r bd1837f054f4 mbed-rtos.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-rtos.lib Sun Jun 09 09:27:44 2019 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed-rtos/#5713cbbdb706
diff -r 000000000000 -r bd1837f054f4 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sun Jun 09 09:27:44 2019 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/176b8275d35d \ No newline at end of file
diff -r 000000000000 -r bd1837f054f4 motordriver.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/motordriver.lib Sun Jun 09 09:27:44 2019 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/porizou3/code/motordriver/#876ba416c547