Diff: main.cpp

Revision:

6:c8a8a07db66a

Parent:

5:5ec7ea8ccd90

diff -r 5ec7ea8ccd90 -r c8a8a07db66a main.cpp
--- a/main.cpp	Thu Sep 20 11:21:00 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,72 +0,0 @@
-
-
-//Test of cheap 13.56 Mhz RFID-RC522 module from eBay
-//This code is based on Martin Olejar's MFRC522 library. Minimal changes
-//Adapted for Nucleo STM32 F401RE. Should work on other Nucleos too
-
-//Connect as follows:
-//RFID pins        ->  Nucleo header CN5 (Arduino-compatible header)
-//----------------------------------------
-//RFID IRQ=pin5    ->   Not used. Leave open
-//RFID MISO=pin4   ->   Nucleo SPI_MISO=PA_6=D12
-//RFID MOSI=pin3   ->   Nucleo SPI_MOSI=PA_7=D11
-//RFID SCK=pin2    ->   Nucleo SPI_SCK =PA_5=D13
-//RFID SDA=pin1    ->   Nucleo SPI_CS  =PB_6=D10
-//RFID RST=pin7    ->   Nucleo         =PA_9=D9
-//3.3V and Gnd to the respective pins
-
-#include "mbed.h"
-#include "MFRC522.h"
-
-#define VERSION 1
-
-//Serial connection to PC for output
-Serial pc(USBTX, USBRX);
-DigitalIn userButton(USER_BUTTON);
-
-
-
-
-
-int main(void)
-{
-    pc.baud(115200);
-    pc.printf("starting...\n");
-    
-    while(1){
-     
-        if(userButton == 0){
-            printf(">>> start reading <<<\n");
-            
-            MFRC522 RfChip(SPI_MOSI, SPI_MISO, SPI_SCK, SPI_CS, D8);
-            
-            /** a test for static asserts */
-            MBED_STATIC_ASSERT(VERSION < 5, "Version to high");
-            
-            RfChip.PCD_Init();
-               
-            while (userButton == 0) {            
-           
-                if ( RfChip.PICC_IsNewCardPresent()) {
-                    if (RfChip.PICC_ReadCardSerial()) {
-    
-                        pc.printf("Card Reader 1: ");
-                        for (uint8_t i = 0; i < RfChip.uid.size; i++) {
-                            pc.printf(" %X02", RfChip.uid.uidByte[i]);
-                        }
-                        pc.printf("\n");
-                        
-                        printf("PICC Type: %s \n", 
-                            RfChip.PICC_GetTypeName(RfChip.PICC_GetType(RfChip.uid.sak)));
-                    }            
-                }
-            }
-            
-            printf(">>> end reading <<<\n");   
-        }
-                    
-        //MBED_ASSERT(userButton == 1);
-    }
-    
-
-}