File content as of revision 43:f459f6efaf5c:

#include <mbed.h>

// GNSS and Compass test programm for Mateksys GNSS&Compass M9N-5883

// #include "PM2_Libary.h"
// #include "Eigen/Dense.h"
#include "QMC5883L.h"
#include "LinearCharacteristics.h"

// logical variable main task
bool do_execute_main_task = false;  // this variable will be toggled via the user button (blue button) to or not to execute the main task

// user button on nucleo board
Timer user_button_timer;            // create Timer object which we use to check if user button was pressed for a certain time (robust against signal bouncing)
InterruptIn user_button(PC_13);     // create InterruptIn interface object to evaluate user button falling and rising edge (no blocking code in ISR)
void user_button_pressed_fcn();     // custom functions which gets executed when user button gets pressed and released, definition below
void user_button_released_fcn();

int main()
{
    // while loop gets executed every main_task_period_ms milliseconds
    const int main_task_period_ms = 10;   // define main task period time in ms e.g. 50 ms -> main task runns 20 times per second
    Timer main_task_timer;                // create Timer object which we use to run the main task every main task period time in ms

    // led on nucleo board
    DigitalOut user_led(LED1);      // create DigitalOut object to command user led

    // create QMC5883L compass object
    I2C i2c(PB_9, PB_8);
    QMC5883L mag(i2c);
    LinearCharacteristics raw_mx2mx, raw_my2my, raw_mz2mz;
    raw_mx2mx.setup(0.9991f, 0.0088f);
    raw_my2my.setup(0.9982f, 0.2092f);
    raw_mz2mz.setup(1.0027f, -0.0903f);
    float mag_val[3] = {0.0f, 0.0f, 0.0f};

    // attach button fall and rise functions to user button object
    user_button.fall(&user_button_pressed_fcn);
    user_button.rise(&user_button_released_fcn);

    // start timer
    main_task_timer.start();

    while (true) { // this loop will run forever

        main_task_timer.reset();

        mag.readMag();

        if (do_execute_main_task) {

            mag_val[0] = raw_mx2mx.evaluate(mag.magX());
            mag_val[1] = raw_my2my.evaluate(mag.magY());
            mag_val[2] = raw_mz2mz.evaluate(mag.magZ());

        } else {

            for (uint8_t i = 0; i <= 3; i++) {
                mag_val[i] = 0;
            }

        }

        user_led = !user_led;

        // do only output via serial what's really necessary (this makes your code slow)
        printf("%f, %f, %f\r\n", mag_val[0], mag_val[1], mag_val[2]);

        // read timer and make the main thread sleep for the remaining time span (non blocking)
        int main_task_elapsed_time_ms = std::chrono::duration_cast<std::chrono::milliseconds>(main_task_timer.elapsed_time()).count();
        thread_sleep_for(main_task_period_ms - main_task_elapsed_time_ms);
    }
}

void user_button_pressed_fcn()
{
    user_button_timer.start();
    user_button_timer.reset();
}

void user_button_released_fcn()
{
    // read timer and toggle do_execute_main_task if the button was pressed longer than the below specified time
    int user_button_elapsed_time_ms = std::chrono::duration_cast<std::chrono::milliseconds>(user_button_timer.elapsed_time()).count();
    user_button_timer.stop();
    if (user_button_elapsed_time_ms > 200) {
        do_execute_main_task = !do_execute_main_task;
    }
}