Pratyush Mallick
this is testing
Diff: app/src/iio_ad7606.c
- Revision:
- 0:3afcd581558d
diff -r 000000000000 -r 3afcd581558d app/src/iio_ad7606.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/app/src/iio_ad7606.c Thu Jan 14 18:54:16 2021 +0530
@@ -0,0 +1,1702 @@
+/***************************************************************************//**
+ * @file iio_ad7606.c
+ * @brief Implementation of AD7606 IIO application interfaces
+ * @details This module acts as an interface for AD7606 IIO application
+********************************************************************************
+ * Copyright (c) 2020 Analog Devices, Inc.
+ *
+ * This software is proprietary to Analog Devices, Inc. and its licensors.
+ * By using this software you agree to the terms of the associated
+ * Analog Devices Software License Agreement.
+*******************************************************************************/
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+
+#include <inttypes.h>
+#include <string.h>
+#include <errno.h>
+
+#include "app_config.h"
+
+#include "tinyiiod.h"
+#include "iio_ad7606.h"
+#include "iio_ad7606_attr.h"
+#include "iio_app.h"
+#include "iio_transport.h"
+
+#include "platform_support.h"
+#include "spi_extra.h"
+#include "gpio_extra.h"
+#include "uart_extra.h"
+#include "irq_extra.h"
+
+#include "ad7606.h"
+#include "ad7606_data_capture.h"
+#include "ad7606_support.h"
+#include "ad7606_user_config.h"
+
+/******************************************************************************/
+/************************ Macros/Constants ************************************/
+/******************************************************************************/
+
+/* ADC data to Voltage conversion scale factor for IIO client */
+#define DEFAULT_SCALE ((DEFAULT_CHN_RANGE / ADC_MAX_COUNT_BIPOLAR) * 1000)
+
+/* Select open wire detection mode (disable to select auto mode) */
+#define MANUAL_OPEN_DETECT
+
+/* Open detect threshold @50K Rpd as per datasheet */
+#define OPEN_DETECT_THRESHOLD_RPD50K 15
+
+/* Number of conversions to be performed before detecting open wire */
+#define OPEN_DETECT_AUTO_MODE_CNTS 10
+
+/******************************************************************************/
+/*************************** Types Declarations *******************************/
+/******************************************************************************/
+
+/**
+* IIO application instance descriptor.
+*/
+static struct iio_app_desc *iio_app_desc;
+
+/**
+ * Device name.
+ */
+static const char dev_name[] = ACTIVE_DEVICE_NAME;
+
+/**
+ * Pointer to the struct representing the AD7606 IIO device
+ */
+static struct ad7606_dev *p_ad7606_dev = NULL;
+
+
+/* Device attributes with default values */
+
+/* Power down mode values string representation (possible values specified in datasheet) */
+static char *operating_mode_str[] = {
+ "0 (Normal Mode)",
+ "1 (Standby Mode)",
+ "2 (Auto Standby Mode)",
+ "3 (Shutdown Mode)"
+};
+
+/* Bandwidth values string */
+static char *bandwidth_str[] = {
+ "0 (Low)",
+ "1 (High)"
+};
+
+/* Channel range values string representation (possible values specified in datasheet) */
+static char *chn_range_str[] = {
+#if defined(DEV_AD7606B)
+ "0 (+/-2.5V SE)", "1 (+/-5.0V SE)", "2 (+/-10.0V SE)", "3 (+/-10.0V SE)",
+ "4 (+/-10.0V SE)", "5 (+/-10.0V SE)", "6 (+/-10.0V SE)", "7 (+/-10.0V SE)",
+ "8 (+/-10.0V SE)", "9 (+/-10.0V SE)", "10 (+/-10.0V SE)", "11 (+/-10.0V SE)",
+#elif defined(DEV_AD7606C_18) || defined(DEV_AD7606C_16)
+ "0 (+/-2.5V SE)", "1 (+/-5.0V SE)", "2 (+/-6.25V SE)", "3 (+/-10.0V SE)",
+ "4 (+/-12.5V SE)", "5 (+5.0V SE)", "6 (+10.0V SE)", "7 (+12.5V SE)",
+ "8 (+/-5.0V DE)", "9 (+/-10.0V DE)", "10 (+/-12.5V DE)", "11 (+/-20.0V DE)"
+#elif defined(DEV_AD7609)
+ "0 (+/-10.0V SE)", "1 (+/-20.0V SE)"
+#else
+ "0 (+/-5.0V SE)", "1 (+/-10.0V SE)"
+#endif
+};
+
+/* Oversampling values string representation (possible values specified in datasheet) */
+static char *oversampling_val_str[] = {
+ "0 (no oversampling)", "1 (oversampling by 2)", "2 (oversampling by 4)",
+ "3 (oversampling by 8)", "4 (oversampling by 16)", "5 (oversampling by 32)",
+ "6 (oversampling by 64)", "7 (oversampling by 128)", "8 (oversampling by 256)"
+};
+
+
+/* Channel range values string representation (possible values specified in datasheet) */
+static float chn_range_val[] = {
+#if defined(DEV_AD7606B)
+ 2.5, 5.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0
+#elif defined(DEV_AD7606C_18) || defined(DEV_AD7606C_16)
+ 2.5, 5.0, 6.25, 10.0, 12.5, 5.0, 10.0, 12.5, 5.0, 10.0, 12.5, 20.0
+#elif defined(DEV_AD7609)
+ 10.0, 20.0
+#else
+ 5.0, 10.0
+#endif
+};
+
+/* Range value per channel */
+static float attr_chn_range[NO_OF_CHANNELS] = {
+ DEFAULT_CHN_RANGE, DEFAULT_CHN_RANGE, DEFAULT_CHN_RANGE, DEFAULT_CHN_RANGE,
+ DEFAULT_CHN_RANGE, DEFAULT_CHN_RANGE, DEFAULT_CHN_RANGE, DEFAULT_CHN_RANGE
+};
+
+/* Scale value per channel */
+static float attr_scale_val[NO_OF_CHANNELS] = {
+ DEFAULT_SCALE, DEFAULT_SCALE, DEFAULT_SCALE, DEFAULT_SCALE,
+ DEFAULT_SCALE, DEFAULT_SCALE, DEFAULT_SCALE, DEFAULT_SCALE
+};
+
+/* Scale value per channel */
+static polarity_e attr_polarity_val[NO_OF_CHANNELS] = {
+ BIPOLAR, BIPOLAR, BIPOLAR, BIPOLAR,
+ BIPOLAR, BIPOLAR, BIPOLAR, BIPOLAR
+};
+
+/* Channel range */
+typedef enum {
+ LOW,
+ HIGH
+} range_e;
+
+/* Device register value */
+static uint8_t device_reg_val;
+
+/* GPIO LED descriptor and init structure */
+static struct gpio_desc *gpio_led;
+
+/******************************************************************************/
+/************************ Functions Prototypes ********************************/
+/******************************************************************************/
+
+static float get_vltg_conv_scale_factor(float chn_range, polarity_e polarity);
+
+/******************************************************************************/
+/************************ Functions Definitions *******************************/
+/******************************************************************************/
+
+/*!
+ * @brief Getter/Setter for the scale attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ */
+ssize_t get_chn_scale(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ return (ssize_t) sprintf(buf, "%f", attr_scale_val[channel->ch_num - 1]);
+}
+
+ssize_t set_chn_scale(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ float scale;
+
+ (void)sscanf(buf, "%f", &scale);
+
+ if (scale > 0.0) {
+ attr_scale_val[channel->ch_num - 1] = scale;
+ return len;
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the raw attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ */
+ssize_t get_chn_raw(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ int32_t adc_data_raw;
+
+ /* Capture the raw adc data */
+ adc_data_raw = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ return (ssize_t) sprintf(buf, "%d", adc_data_raw);
+}
+
+ssize_t set_chn_raw(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ /* NA- Can't set raw value */
+ return len;
+}
+
+
+/*!
+ * @brief Getter/Setter for the operating mode attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_operating_mode(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t read_val;
+ uint8_t operating_mode_value;
+
+ if (ad7606_spi_reg_read(device, AD7606_REG_CONFIG, &read_val) == SUCCESS) {
+ operating_mode_value = (read_val & AD7606_CONFIG_OPERATION_MODE_MSK);
+
+ if (operating_mode_value < sizeof(operating_mode_str) / sizeof(
+ operating_mode_str[0])) {
+ return (ssize_t)sprintf(buf, "%s", operating_mode_str[operating_mode_value]);
+ }
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_operating_mode(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t operating_mode_value;
+
+ (void)sscanf(buf, "%d", &operating_mode_value);
+
+ if (operating_mode_value < sizeof(operating_mode_str) / sizeof(
+ operating_mode_str[0])) {
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_CONFIG,
+ AD7606_CONFIG_OPERATION_MODE_MSK,
+ operating_mode_value) == SUCCESS) {
+ return len;
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the power down mode attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available for all devices except AD7606B and AD7606C
+ */
+ssize_t get_power_down_mode(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t gpio_stby_val;
+ uint8_t gpio_range_val;
+
+ if (gpio_get_value(((struct ad7606_dev *)device)->gpio_stby_n,
+ &gpio_stby_val) == SUCCESS) {
+ if (gpio_get_value(((struct ad7606_dev *)device)->gpio_range,
+ &gpio_range_val) == SUCCESS) {
+
+ if (gpio_stby_val) {
+ return sprintf(buf, "%s", operating_mode_str[AD7606_NORMAL]);
+ } else {
+ if (gpio_range_val) {
+ return sprintf(buf, "%s", operating_mode_str[AD7606_STANDBY]);
+ } else {
+ return sprintf(buf, "%s", operating_mode_str[AD7606_SHUTDOWN]);
+ }
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_power_down_mode(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t power_down_mode_value;
+ static enum ad7606_op_mode prev_power_down_mode = AD7606_NORMAL;
+ struct ad7606_config dev_config;
+
+ sscanf(buf, "%d", &power_down_mode_value);
+
+ if (power_down_mode_value < (sizeof(operating_mode_str) / sizeof(
+ operating_mode_str[0]))) {
+
+ dev_config.op_mode = power_down_mode_value;
+
+ switch (power_down_mode_value) {
+ case AD7606_NORMAL:
+ if (ad7606_set_config(device, dev_config) == SUCCESS) {
+ /* Reset the device if previous power down mode was either standby
+ * or shutdown */
+ if (prev_power_down_mode != AD7606_NORMAL) {
+
+ /* Power-up wait time */
+ mdelay(1);
+
+ /* Toggle reset pin */
+ if (gpio_set_value(((struct ad7606_dev *)device)->gpio_reset,
+ GPIO_HIGH) == SUCCESS) {
+ mdelay(1);
+
+ if (gpio_set_value(((struct ad7606_dev *)device)->gpio_reset,
+ GPIO_LOW) == SUCCESS) {
+ prev_power_down_mode = AD7606_NORMAL;
+ return len;
+ }
+ }
+ }
+ }
+ break;
+
+ case AD7606_STANDBY:
+ if (ad7606_set_config(device, dev_config) == SUCCESS) {
+ prev_power_down_mode = AD7606_STANDBY;
+ return len;
+ }
+ break;
+
+ case AD7606_SHUTDOWN:
+ if (ad7606_set_config(device, dev_config) == SUCCESS) {
+ prev_power_down_mode = AD7606_SHUTDOWN;
+ return len;
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the range attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available for all devices except AD7606B and AD7606C
+ */
+ssize_t get_range(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t gpio_range_val;
+ struct ad7606_dev *dev = device;
+
+ if (gpio_get_value(dev->gpio_range, &gpio_range_val) == SUCCESS) {
+ if (gpio_range_val) {
+ return sprintf(buf, "%s", chn_range_str[HIGH]);
+ } else {
+ return sprintf(buf, "%s", chn_range_str[LOW]);
+ }
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_range(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t range_value;
+ struct ad7606_dev *dev = device;
+
+ (void)sscanf(buf, "%d", &range_value);
+
+ if (range_value < (sizeof(chn_range_str) / sizeof(chn_range_str[0]))) {
+ if (range_value == LOW) {
+ if (gpio_set_value(dev->gpio_range, GPIO_LOW) == SUCCESS) {
+ return len;
+ }
+ } else {
+ if (gpio_set_value(dev->gpio_range, GPIO_HIGH) == SUCCESS) {
+ return len;
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the oversampling attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available for all devices except AD7606B and AD7606C
+ */
+ssize_t get_oversampling(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t oversampling_value;
+ uint8_t read_val;
+ uint8_t gpio_osr0_val;
+ uint8_t gpio_osr1_val;
+ uint8_t gpio_osr2_val;
+ struct ad7606_dev *dev = device;
+
+#if defined(DEV_AD7606B) || defined(DEV_AD7606C_18) || defined(DEV_AD7606C_16)
+ if (ad7606_spi_reg_read(device,
+ AD7606_REG_OVERSAMPLING,
+ &read_val) == SUCCESS) {
+ oversampling_value = (read_val & AD7606_OVERSAMPLING_MSK);
+
+ if (oversampling_value < sizeof(oversampling_val_str) / sizeof(
+ oversampling_val_str[0])) {
+ return (ssize_t)sprintf(buf, "%s", oversampling_val_str[oversampling_value]);
+ }
+ }
+#else
+ if (gpio_get_value(dev->gpio_os0, &gpio_osr0_val) == SUCCESS) {
+ if (gpio_get_value(dev->gpio_os1, &gpio_osr1_val) == SUCCESS) {
+ if (gpio_get_value(dev->gpio_os2, &gpio_osr2_val) == SUCCESS) {
+ oversampling_value = (gpio_osr2_val << 2) | (gpio_osr1_val << 1) |
+ gpio_osr0_val;
+
+ if (oversampling_value < (sizeof(oversampling_val_str) / sizeof(
+ oversampling_val_str[0]))) {
+ return sprintf(buf, "%s", oversampling_val_str[oversampling_value]);
+ }
+ }
+ }
+ }
+#endif
+
+ return -EINVAL;
+}
+
+ssize_t set_oversampling(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t oversampling_value;
+ struct ad7606_oversampling oversampling_cfg;
+
+ (void)sscanf(buf, "%d", &oversampling_value);
+
+ if (oversampling_value < (sizeof(oversampling_val_str) / sizeof(
+ oversampling_val_str[0]))) {
+
+ oversampling_cfg.os_pad = 0;
+ oversampling_cfg.os_ratio = oversampling_value;
+
+ ad7606_set_oversampling(device, oversampling_cfg);
+
+ return len;
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the bandwidth attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available for only AD7606C
+ */
+ssize_t get_bandwidth(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t bw_value;
+ uint8_t read_val;
+
+ if (ad7606_spi_reg_read(device,
+ AD7606_REG_BANDWIDTH,
+ &read_val) == SUCCESS) {
+ bw_value = (read_val >> (channel->ch_num - 1)) & 0x1;
+
+ if (bw_value < sizeof(bandwidth_str) / sizeof(
+ bandwidth_str[0])) {
+ return (ssize_t)sprintf(buf, "%s", bandwidth_str[bw_value]);
+ }
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_bandwidth(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t bw_value;
+ uint8_t read_val;
+
+ (void)sscanf(buf, "%d", &bw_value);
+
+ if (bw_value < sizeof(bandwidth_str) / sizeof(
+ bandwidth_str[0])) {
+ if (ad7606_spi_reg_read(device,
+ AD7606_REG_BANDWIDTH,
+ &read_val) == SUCCESS) {
+ if (bw_value) {
+ read_val |= (1 << (channel->ch_num - 1));
+ } else {
+ read_val &= (~(1 << (channel->ch_num - 1)));
+ }
+
+ if (ad7606_spi_reg_write(device,
+ AD7606_REG_BANDWIDTH,
+ read_val) == SUCCESS) {
+ return len;
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel range attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_range(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t read_val;
+ uint8_t chn_range;
+
+ if (ad7606_spi_reg_read(device, AD7606_REG_RANGE_CH_ADDR(channel->ch_num-1),
+ &read_val) == SUCCESS) {
+ if (((channel->ch_num - 1) % 2) != 0) {
+ read_val >>= CHANNEL_RANGE_MSK_OFFSET;
+ chn_range = read_val;
+ } else {
+ chn_range = (read_val & AD7606_RANGE_CH_MSK(channel->ch_num - 1));
+ }
+
+ if (chn_range < sizeof(chn_range_str) / sizeof(chn_range_str[0])) {
+ return (ssize_t)sprintf(buf, "%s", chn_range_str[chn_range]);
+ }
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_range(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t chn_range;
+
+ (void)sscanf(buf, "%d", &chn_range);
+
+ if (chn_range < sizeof(chn_range_val) / sizeof(chn_range_val[0])) {
+
+ /* Get the polarity of channel */
+ attr_polarity_val[channel->ch_num - 1] = ad7606_get_input_polarity(chn_range);
+
+ attr_chn_range[channel->ch_num - 1] = chn_range_val[chn_range];
+ attr_scale_val[channel->ch_num - 1] = get_vltg_conv_scale_factor(
+ chn_range_val[chn_range],
+ attr_polarity_val[channel->ch_num - 1]);
+
+ if (((channel->ch_num - 1) % 2) != 0) {
+ chn_range <<= CHANNEL_RANGE_MSK_OFFSET;
+ }
+
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_RANGE_CH_ADDR(channel->ch_num-1),
+ AD7606_RANGE_CH_MSK(channel->ch_num-1),
+ chn_range) == SUCCESS) {
+ return len;
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel gain attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_gain(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t read_val;
+ uint8_t chn_gain_value;
+
+ if (ad7606_spi_reg_read(device,
+ AD7606_REG_GAIN_CH(channel->ch_num - 1),
+ &read_val) == SUCCESS) {
+ chn_gain_value = (read_val & AD7606_GAIN_MSK);
+ return (ssize_t)sprintf(buf, "%d", chn_gain_value);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_gain(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t chn_gain_value;
+
+ (void)sscanf(buf, "%d", &chn_gain_value);
+
+ if (ad7606_set_ch_gain(device, channel->ch_num - 1,
+ chn_gain_value) == SUCCESS) {
+ return len;
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel offset attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_offset(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t chn_offset_value;
+
+ if (ad7606_spi_reg_read(device, AD7606_REG_OFFSET_CH(channel->ch_num-1),
+ &chn_offset_value) == SUCCESS) {
+ return (ssize_t)sprintf(buf, "%d", chn_offset_value);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_offset(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t chn_offset_value = 0;
+
+ (void)sscanf(buf, "%d", &chn_offset_value);
+
+ if (ad7606_set_ch_offset(device, channel->ch_num - 1,
+ chn_offset_value) == SUCCESS) {
+ return len;
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel pahse offset attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_phase_offset(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t chn_phase_offset_value;
+
+ if (ad7606_spi_reg_read(device,
+ AD7606_REG_PHASE_CH(channel->ch_num - 1),
+ &chn_phase_offset_value) == SUCCESS) {
+ return (ssize_t)sprintf(buf, "%d", chn_phase_offset_value);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_phase_offset(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t chn_phase_offset_value = 0;
+
+ (void)sscanf(buf, "%d", &chn_phase_offset_value);
+
+ if (ad7606_set_ch_phase(device, channel->ch_num - 1,
+ chn_phase_offset_value) == SUCCESS) {
+ return len;
+ }
+
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel temperature attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_temperature(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ int32_t adc_chn_data = 0;
+ float temperature;
+ float voltage;
+
+ /* Configure the channel multiplexer to select temperature read */
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ TEMPERATURE_MUX)) == SUCCESS) {
+
+ /* Allow to settle Mux channel */
+ udelay(100);
+
+ /* Sample the channel and read conversion result */
+ adc_chn_data = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Convert ADC data into equivalent voltage */
+ voltage = convert_adc_raw_to_voltage(adc_chn_data,
+ attr_scale_val[channel->ch_num - 1]);
+
+ /* Obtain the temperature using equation specified in device datasheet */
+ temperature = ((voltage - 0.69068) / 0.019328) + 25.0;
+
+ /* Change channel mux back to analog input */
+ (void)ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ ANALOG_INPUT_MUX));
+
+ return (ssize_t)sprintf(buf, "%f", temperature);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_temperature(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set temperature
+ return -EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel Vref attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_vref(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ float vref_voltge;
+ int32_t adc_chn_data;
+
+ /* Configure the channel multiplexer to select Vref read */
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ VREF_MUX)) == SUCCESS) {
+
+ /* Allow to settle Mux channel */
+ udelay(100);
+
+ /* Sample the channel and read conversion result */
+ adc_chn_data = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Convert ADC data into equivalent voltage */
+ vref_voltge = convert_adc_raw_to_voltage(adc_chn_data,
+ attr_scale_val[channel->ch_num - 1]);
+
+ /* Divide by 4 since Vref Mux has 4x multiplier on it */
+ vref_voltge /= VREF_MUX_MULTIPLIER;
+
+ /* Change channel mux back to analog input */
+ (void)ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ ANALOG_INPUT_MUX));
+
+ return (ssize_t)sprintf(buf, "%f", vref_voltge);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_vref(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set Vref
+ return - EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel Vdrive attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_vdrive(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ float vdrive_voltge;
+ int32_t adc_chn_data;
+
+ /* Configure the channel multiplexer to select Vdrive read */
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ VDRIVE_MUX)) == SUCCESS) {
+
+ /* Allow to settle Mux channel */
+ udelay(100);
+
+ /* Sample the channel and read conversion result */
+ adc_chn_data = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Convert ADC data into equivalent voltage */
+ vdrive_voltge = convert_adc_raw_to_voltage(adc_chn_data,
+ attr_scale_val[channel->ch_num - 1]);
+
+ /* Change channel mux back to analog input */
+ (void)ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ ANALOG_INPUT_MUX));
+
+ return (ssize_t)sprintf(buf, "%f", vdrive_voltge);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_vdrive(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set Vdrive
+ return - EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel ALDO attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_aldo(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ float aldo_voltge;
+ int32_t adc_chn_data;
+
+ /* Configure the channel multiplexer to select ALDO read */
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ ALDO_MUX)) == SUCCESS) {
+
+ /* Allow to settle Mux channel */
+ udelay(100);
+
+ /* Sample the channel and read conversion result */
+ adc_chn_data = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Convert ADC data into equivalent voltage */
+ aldo_voltge = convert_adc_raw_to_voltage(adc_chn_data,
+ attr_scale_val[channel->ch_num - 1]);
+
+ /* Divide by 4 since ALDO Mux has 4x multiplier on it */
+ aldo_voltge /= VREF_MUX_MULTIPLIER;
+
+ /* Change channel mux back to analog input */
+ (void)ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ ANALOG_INPUT_MUX));
+
+ return (ssize_t)sprintf(buf, "%f", aldo_voltge);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_aldo(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set ALDO
+ return - EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel DLDO attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ * @note Available only for AD7606B and AD7606C
+ */
+ssize_t get_chn_dldo(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ float dldo_voltge;
+ int32_t adc_chn_data;
+
+ /* Configure the channel multiplexer to select DLDO read */
+ if (ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ DLDO_MUX)) == SUCCESS) {
+
+ /* Allow to settle Mux channel */
+ udelay(100);
+
+ /* Sample the channel and read conversion result */
+ adc_chn_data = single_data_read(device,
+ channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Convert ADC data into equivalent voltage */
+ dldo_voltge = convert_adc_raw_to_voltage(adc_chn_data,
+ attr_scale_val[channel->ch_num - 1]);
+
+ /* Divide by 4 since ALDO Mux has 4x multiplier on it */
+ dldo_voltge /= VREF_MUX_MULTIPLIER;
+
+ /* Change channel mux back to analog input */
+ (void)ad7606_spi_write_mask(device,
+ AD7606_REG_DIAGNOSTIC_MUX_CH(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_MSK(channel->ch_num - 1),
+ AD7606_DIAGN_MUX_CH_VAL((channel->ch_num - 1),
+ ANALOG_INPUT_MUX));
+
+ return (ssize_t)sprintf(buf, "%f", dldo_voltge);
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_dldo(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set DLDO
+ return - EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the channel open wire detect attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ */
+ssize_t get_chn_open_wire_detect(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ int32_t data[2];
+ uint8_t open_detect_flag = false;
+ int32_t rw_status = FAILURE;
+
+#if defined MANUAL_OPEN_DETECT
+ /* Read the ADC output voltage on channel */
+ data[0] = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Enter into manual open detect mode */
+ if (ad7606_spi_reg_write(device, AD7606_REG_OPEN_DETECT_QUEUE, 1) == SUCCESS) {
+ /* Enable open wire detection on selected channel */
+ if (ad7606_spi_reg_write(device, AD7606_REG_OPEN_DETECT_ENABLE,
+ (1 << ((channel->ch_num) - 1))) == SUCCESS) {
+ /* Read the ADC output after open wire detection */
+ data[1] = single_data_read(device, channel->ch_num - 1,
+ attr_polarity_val[channel->ch_num - 1]);
+
+ /* Check for shift in common mode output voltage */
+ if ((data[1] - data[0]) > OPEN_DETECT_THRESHOLD_RPD50K) {
+ open_detect_flag = true;
+ }
+
+ rw_status = SUCCESS;
+ }
+ }
+#else
+ /* Enter into auto open detect mode */
+ if (ad7606_spi_reg_write(device, AD7606_REG_OPEN_DETECT_QUEUE,
+ OPEN_DETECT_AUTO_MODE_CNTS) == SUCCESS) {
+ /* Enable open wire detection on selected channel */
+ if (ad7606_spi_reg_write(device, AD7606_REG_OPEN_DETECT_ENABLE,
+ (1 << ((channel->ch_num) - 1))) == SUCCESS) {
+ mdelay(1);
+
+ if (ad7606_spi_reg_read(device, AD7606_REG_OPEN_DETECTED,
+ &open_detect_flag) == SUCCESS) {
+ rw_status = SUCCESS;
+
+ open_detect_flag >>= (channel->ch_num -1);
+ open_detect_flag &= 0x1;
+ }
+ }
+ }
+#endif
+
+ /* Disable open detect mode */
+ (void)ad7606_spi_reg_write(device, AD7606_REG_OPEN_DETECT_QUEUE, 0);
+
+ if (rw_status == SUCCESS) {
+ if (open_detect_flag) {
+ strcpy(buf, "Open Wire Detected");
+ } else {
+ strcpy(buf, "Open Wire Not Detected");
+ }
+
+ return len;
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_open_wire_detect(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set open wire detect
+ return - EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the adc calibration
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ */
+ssize_t get_chn_calibrate_adc(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ float lsb_voltage;
+ float adc_voltage;
+ polarity_e polarity = attr_polarity_val[channel->ch_num - 1];
+ int32_t adc_data;
+ int8_t chn_offset;
+
+ /* Perform the system offset calibration */
+
+ if (polarity == UNIPOLAR) {
+ lsb_voltage = attr_chn_range[channel->ch_num - 1] / ADC_MAX_COUNT_UNIPOLAR;
+ } else {
+ lsb_voltage = attr_chn_range[channel->ch_num - 1] / ADC_MAX_COUNT_BIPOLAR;
+ }
+
+ /* Sample and read the ADC channel */
+ adc_data = single_data_read(device, channel->ch_num - 1,
+ polarity);
+
+ /* Get an equivalent ADC voltage */
+ adc_voltage = convert_adc_raw_to_voltage(adc_data,
+ attr_scale_val[channel->ch_num - 1]);
+
+ /* Calculate the channel offset and write it to offset register (0x80-chn_offset) */
+ chn_offset = (adc_voltage / lsb_voltage);
+
+ if (ad7606_set_ch_offset(device, channel->ch_num - 1,
+ chn_offset) == SUCCESS) {
+ return sprintf(buf, "%s", "ADC Calibration Done");
+ }
+
+ return -EINVAL;
+}
+
+ssize_t set_chn_calibrate_adc(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ // NA- Can't set open wire detect
+ return - EINVAL;
+}
+
+
+/*!
+ * @brief Getter/Setter for the direct register access attribute value
+ * @param device- pointer to IIO device structure
+ * @param buf- pointer to buffer holding attribute value
+ * @param len- length of buffer string data
+ * @param channel- pointer to IIO channel structure
+ * @return Number of characters read/written
+ */
+ssize_t get_direct_reg_access(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ return (ssize_t)sprintf(buf, "%d", device_reg_val);
+}
+
+ssize_t set_direct_reg_access(void *device,
+ char *buf,
+ size_t len,
+ const struct iio_ch_info *channel)
+{
+ uint8_t reg_address;
+ char *token;
+ uint8_t offset = strlen("0x");
+ char str[10] = "";
+ uint8_t i=0;
+ uint8_t reg_data;
+
+ if (buf[1] == 'x') {
+ /* Write a data to device */
+
+ /* Extract the register address from received string */
+ strcpy(str, buf);
+ token = strtok(str, " ");
+ (void)sscanf(token + offset, "%x", ®_address);
+
+ /* Extract the register data from received string */
+ i = (strlen(str) + 1) + offset;
+ (void)sscanf(str + i, "%x", ®_data);
+
+ if (reg_address <= NUM_OF_REGISTERS) {
+ if ((ad7606_spi_reg_write(device, reg_address, reg_data) == SUCCESS)) {
+ return len;
+ }
+ }
+ } else {
+ /* Read the data from device */
+ (void)sscanf(buf, "%d", ®_address);
+ if ((ad7606_spi_reg_read(device, reg_address, &device_reg_val) == SUCCESS)) {
+ return len;
+ }
+ }
+
+ return -EINVAL;
+}
+
+
+/**
+ * @brief Get xml corresponding to an AD7606 device.
+ * @param xml - Xml containing description of a device.
+ * @param iio_dev - Structure describing a device, channels and attributes.
+ * @return SUCCESS in case of success or negative value otherwise.
+ */
+static ssize_t iio_ad7606_get_xml(char **xml, struct iio_device *iio_dev)
+{
+ *xml = (char*)calloc(1, strlen(ad7606_phy_xml) + 1);
+ if (!(*xml)) {
+ return -ENOMEM;
+ }
+
+ memcpy(*xml, ad7606_phy_xml, strlen(ad7606_phy_xml));
+
+ return SUCCESS;
+}
+
+
+/**
+ * @brief Read buffer data corresponding to AD7606 IIO device
+ * @param dev_instance[in] - IIO device instance
+ * @param pbuf[out] - Pointer to output data buffer
+ * @return SUCCESS in case of success or negative value otherwise
+ */
+static ssize_t iio_ad7606_read_data(void *dev_instance,
+ char *pbuf,
+ size_t offset,
+ size_t bytes_count,
+ uint32_t ch_mask)
+{
+ /* Read the buffered data */
+ buffered_data_read(pbuf, bytes_count, offset, ch_mask);
+
+ return bytes_count;
+}
+
+
+/**
+ * @brief Create structure describing a device, channels and attributes
+ * @param device_name[in] - Device name
+ * @return iio_device or NULL, in case of failure
+ */
+static struct iio_device *iio_ad7606_create_device(const char *device_name)
+{
+ struct iio_device *iio_ad7606_device;
+
+ iio_ad7606_device = calloc(1, sizeof(struct iio_device));
+ if (!iio_ad7606_device) {
+ return NULL;
+ }
+
+ iio_ad7606_device->name = device_name;
+ iio_ad7606_device->num_ch = sizeof(iio_ad7606_channels) / sizeof(
+ iio_ad7606_channels[0]);
+ iio_ad7606_device->channels = iio_ad7606_channels;
+ iio_ad7606_device->attributes = global_attributes;
+
+ return iio_ad7606_device;
+}
+
+
+/**
+ * @brief Delete IIO device.
+ * @param iio_device - Structure describing a device, channels and attributes
+ * @return SUCCESS in case of success or negative value otherwise
+ */
+static ssize_t iio_ad7606_delete_device(struct iio_device *iio_device)
+{
+ if (!iio_device) {
+ return FAILURE;
+ }
+
+ free(iio_device);
+
+ return SUCCESS;
+}
+
+
+/**
+ * @brief Init for reading/writing and parameterization of a
+ * ad7606 IIO device
+ * @param desc[in,out] - IIO device descriptor
+ * @param init[in] - Configuration structure
+ * @return SUCCESS in case of success, FAILURE otherwise
+ */
+int32_t iio_ad7606_init(struct iio_ad7606_desc **desc,
+ struct iio_ad7606_init_param *init)
+{
+ int32_t status;
+ struct iio_interface *iio_interface;
+
+ iio_interface = (struct iio_interface *)calloc(1, sizeof(struct iio_interface));
+ if (!iio_interface) {
+ return -ENOMEM;
+ }
+
+ *iio_interface = (struct iio_interface) {
+ .name = dev_name,
+ .dev_instance = init->ad7606_phy,
+ .iio = iio_ad7606_create_device(dev_name),
+ .get_xml = iio_ad7606_get_xml,
+ .transfer_dev_to_mem = NULL,
+ .transfer_mem_to_dev = NULL,
+ .read_data = iio_ad7606_read_data,
+ .write_data = NULL,
+ };
+
+ status = iio_register(iio_interface);
+ if (status < 0) {
+ free(iio_interface);
+ return FAILURE;
+ }
+
+ *desc = calloc(1, sizeof(struct iio_ad7606_desc));
+ if (!(*desc)) {
+ iio_unregister(iio_interface);
+ free(iio_interface);
+ return FAILURE;
+ }
+
+ (*desc)->iio_interface = iio_interface;
+
+ return SUCCESS;
+}
+
+
+/**
+ * @brief Release resources allocated for IIO device
+ * @param desc[in] - IIO device descriptor
+ * @return SUCCESS in case of success, FAILURE otherwise
+ */
+int32_t iio_ad7606_remove(struct iio_ad7606_desc *desc)
+{
+ int32_t status;
+
+ if (!desc) {
+ return FAILURE;
+ }
+
+ status = iio_unregister(desc->iio_interface);
+ if (status < 0) {
+ return FAILURE;
+ }
+
+ status = iio_ad7606_delete_device(desc->iio_interface->iio);
+ if (status < 0) {
+ return FAILURE;
+ }
+
+ free(desc->iio_interface);
+ free(desc);
+
+ return SUCCESS;
+}
+
+
+/*!
+ * @brief Get scale factor for adc data to voltage conversion for IIO client
+ * @param chn_range[in] - Current channel voltage range
+ * @param chn_range_bits[in] - Channel range register bits
+ * @return scale
+ * @details This function samples and capture the new data when previous data
+ * is transmitted to IIO client
+ */
+static float get_vltg_conv_scale_factor(float chn_range, polarity_e polarity)
+{
+ float scale;
+
+ /* Get the scale factor for voltage conversion from range */
+ if (polarity == UNIPOLAR) {
+ scale = (chn_range / ADC_MAX_COUNT_UNIPOLAR) * 1000;
+ } else {
+ scale = (chn_range / ADC_MAX_COUNT_BIPOLAR) * 1000;
+ }
+
+ return scale;
+}
+
+
+/**
+ * @brief Initialize the IRQ contoller
+ * @param uart_desc[in] - UART descriptor for UART Rx IRQ event init
+ * @return none
+ * @details This function initialize the interrupt controller
+ */
+static int32_t iio_interrupt_handler_init(mbed_uart_desc *uart_desc)
+{
+ /* Pin to generate external interrupt */
+ PinName ext_int_pin = BUSY_PIN;
+
+ /* External interrupt descriptor */
+ struct irq_ctrl_desc *external_int_desc;
+
+ /* Define external interrupt platform specific parameters structure */
+ mbed_irq_init_param mbed_ext_int_init_param = {
+ .int_mode = EXT_IRQ_FALL,
+ .int_obj_type = &ext_int_pin
+ };
+
+ /* External interrupt init parameters */
+ struct irq_init_param external_int_init_param = {
+ .irq_ctrl_id = EXTERNAL_INT_ID,
+ .extra = &mbed_ext_int_init_param
+ };
+
+ /* External interrupt callback descriptor */
+ struct callback_desc external_int_callback_desc = {
+ &do_conversion_callback,
+ NULL,
+ NULL
+ };
+
+ /* UART Rx interrupt descriptor */
+ struct irq_ctrl_desc *uart_rx_int_desc;
+
+ /* Define external interrupt platform specific parameters structure */
+ mbed_irq_init_param mbed_uart_rx_int_init_param = {
+ .int_mode = 0,
+ .int_obj_type = uart_desc->uart_port
+ };
+
+ /* UART Rx interrupt init parameters */
+ struct irq_init_param uart_rx_int_init_param = {
+ .irq_ctrl_id = UART_RX_INT_ID,
+ .extra = &mbed_uart_rx_int_init_param
+ };
+
+ /* UART Rx interrupt callback descriptor */
+ struct callback_desc uart_rx_int_callback_desc = {
+ &iio_uart_rx_callback,
+ NULL,
+ NULL
+ };
+
+ /* Init interrupt controller for external interrupt */
+ if (irq_ctrl_init(&external_int_desc, &external_int_init_param) == FAILURE) {
+ return FAILURE;
+ }
+
+ /* Init interrupt controller for UART Rx interrupt */
+ if (irq_ctrl_init(&uart_rx_int_desc, &uart_rx_int_init_param) == FAILURE) {
+ return FAILURE;
+ }
+
+ /* Register a callback function for external interrupt */
+ if (irq_register_callback(external_int_desc, EXTERNAL_INT_ID,
+ &external_int_callback_desc) == FAILURE) {
+ return FAILURE;
+ }
+
+ /* Register a callback function for UART Rx interrupt */
+ if (irq_register_callback(uart_rx_int_desc, UART_RX_INT_ID,
+ &uart_rx_int_callback_desc) == FAILURE) {
+ return FAILURE;
+ }
+
+ return SUCCESS;
+}
+
+
+/**
+ * @brief Initialize the IIO interface for AD7606 IIO device
+ * @return none
+ * @return SUCCESS in case of success, FAILURE otherwise
+ */
+int32_t ad7606_iio_initialize(void)
+{
+ int32_t init_status;
+
+ /**
+ * AD7606 IIO instance descriptor
+ */
+ struct iio_ad7606_desc *piio_ad7606_desc;
+
+ /**
+ * AD7606 IIO init parameters
+ */
+ struct iio_ad7606_init_param iio_ad7606_init_param;
+
+ /**
+ * IIO application init parameters
+ */
+ struct iio_app_init_param iio_app_init_par;
+
+ /**
+ * UART serial interface read/write callback
+ */
+ struct iio_server_ops uart_iio_server_ops;
+
+ /*
+ * UART Mbed init extra parameters structure
+ */
+ mbed_uart_init_param uart_extra_init_param;
+
+ /*
+ * UART init parameters structure
+ */
+ struct uart_init_param uart_init_param;
+
+ /**
+ * IIO application UART descriptor
+ */
+ struct uart_desc *uart_desc = NULL;
+
+ /*
+ * GPIO LED Init parameters structure
+ */
+ struct gpio_init_param gpio_init_led;
+
+ iio_ad7606_init_param = (struct iio_ad7606_init_param) {
+ .ad7606_phy = NULL,
+ };
+
+ uart_extra_init_param = (mbed_uart_init_param) {
+ .uart_tx_pin = UART_TX,
+ .uart_rx_pin = UART_RX
+ };
+
+ uart_init_param = (struct uart_init_param ) {
+ .device_id = NULL,
+ .baud_rate = IIO_UART_BAUD_RATE,
+ .extra = &uart_extra_init_param
+ };
+
+ uart_iio_server_ops = (struct iio_server_ops) {
+ .read = iio_uart_read,
+ .write = iio_uart_write,
+ };
+
+ gpio_init_led = (struct gpio_init_param) {
+ .number = LED_GREEN,
+ .extra = NULL
+ };
+
+ iio_app_init_par = (struct iio_app_init_param) {
+ .iio_server_ops = &uart_iio_server_ops,
+ };
+
+ /* Initialize AD7606 device and peripheral interface */
+ init_status = ad7606_init(&p_ad7606_dev, &ad7606_init_str);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+
+ /* Initialize the LED GPIO descriptor */
+ init_status = gpio_get_optional(&gpio_led, &gpio_init_led);
+ if (init_status != SUCCESS) {
+ return init_status;
+ } else {
+ init_status = gpio_direction_output(gpio_led, GPIO_HIGH);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+ }
+
+ /* Get the AD7606 IIO device instance */
+ iio_ad7606_init_param.ad7606_phy = p_ad7606_dev;
+
+ /* Initialize the UART interface for IIO application */
+ init_status = iio_uart_init(&uart_desc, &uart_init_param);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+
+ /* Initialize the IIO application interface */
+ init_status = iio_app_init(&iio_app_desc, &iio_app_init_par);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+
+ /* Register and initialize the AD7606 device into IIO interface */
+ init_status = iio_ad7606_init(&piio_ad7606_desc, &iio_ad7606_init_param);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+
+ /* Init the data capture for AD7606 IIO app */
+ init_status = iio_data_capture_init(p_ad7606_dev);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+
+ /* Init the interrupt event handler for AD7606 IIO app */
+ init_status = iio_interrupt_handler_init(uart_desc->extra);
+ if (init_status != SUCCESS) {
+ return init_status;
+ }
+
+ return init_status;
+}
+
+
+/**
+ * @brief Run the AD7606 IIO event handler
+ * @return none
+ * @details This function monitors the new IIO client event
+ */
+void ad7606_iio_event_handler(void)
+{
+ static bool background_conversion_started = false;
+
+ /* Handle new IIO command */
+ if (is_new_iio_command_detected()) {
+ /* Start/Stop the bakground conversion based on buffer read request */
+ if (!check_iio_cmd("READBUF", 7)) {
+ stop_background_data_conversion();
+ background_conversion_started = false;
+ } else {
+ if (background_conversion_started == false) {
+ start_background_data_conversion();
+ background_conversion_started = true;
+ }
+ }
+
+ /* Run the IIO interface when new command is detected */
+ (void)iio_app(iio_app_desc);
+ }
+}