Pratyush Mallick
this is testing
Diff: app/app_config.h
- Revision:
- 0:e8a1ba50c46b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/app/app_config.h Thu Jan 14 19:12:57 2021 +0530 @@ -0,0 +1,259 @@ +/*************************************************************************//** + * @file app_config.h + * @brief Configuration file of nanodac firmware example program +****************************************************************************** +* Copyright (c) 2020 Analog Devices, Inc. +* +* All rights reserved. +* +* This software is proprietary to Analog Devices, Inc. and its licensors. +* By using this software you agree to the terms of the associated +* Analog Devices Software License Agreement. +*****************************************************************************/ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + +/******************************************************************************/ +/***************************** Include Files **********************************/ +/******************************************************************************/ + +#include <stdint.h> +#include <PinNames.h> + +/******************************************************************************/ +/********************** Macros and Constants Definitions **********************/ +/******************************************************************************/ + +// **** Note for User: ACTIVE_DEVICE selection **** +// Define the device type here from the list of below device type defines +// e.g. #define DEV_AD5677R -> This will make AD5677R as an ACTIVE_DEVICE. +// The ACTIVE_DEVICE is default set to AD5686, if device type is not defined. + +//#define DEV_AD5677R + +/** + The ADI SDP_K1 can be used with both arduino headers + or the 120-pin SDP connector found on ADI evaluation + boards. The default is the SDP connector. + + Uncomment the ARDUINO #define below to enable the ARDUINO connector +*/ + +//#define ARDUINO + + +#if defined(DEV_AD5671R) +#define ACTIVE_DEVICE ID_AD5671R +#define ACTIVE_DEVICE_NAME "AD5671R" +#elif defined(DEV_AD5672R) +#define ACTIVE_DEVICE ID_AD5672R +#define ACTIVE_DEVICE_NAME "AD5672R" +#elif defined(DEV_AD5673R) +#define ACTIVE_DEVICE ID_AD5673R +#define ACTIVE_DEVICE_NAME "AD5673R" +#elif defined(DEV_AD5674) +#define ACTIVE_DEVICE ID_AD5674 +#define ACTIVE_DEVICE_NAME "AD5674" +#elif defined(DEV_AD5674R) +#define ACTIVE_DEVICE ID_AD5674R +#define ACTIVE_DEVICE_NAME "AD5674R" +#elif defined(DEV_AD5675R) +#define ACTIVE_DEVICE ID_AD5675R +#define ACTIVE_DEVICE_NAME "AD5675R" +#elif defined(DEV_AD5676) +#define ACTIVE_DEVICE ID_AD5676 +#define ACTIVE_DEVICE_NAME "AD5676" +#elif defined(DEV_AD5676R) +#define ACTIVE_DEVICE ID_AD5676R +#define ACTIVE_DEVICE_NAME "AD5676R" +#elif defined(DEV_AD5677R) +#define ACTIVE_DEVICE ID_AD5677R +#define ACTIVE_DEVICE_NAME "AD5677R" +#elif defined(DEV_AD5679) +#define ACTIVE_DEVICE ID_AD5679 +#define ACTIVE_DEVICE_NAME "AD5679" +#elif defined(DEV_AD5679R) +#define ACTIVE_DEVICE ID_AD5679R +#define ACTIVE_DEVICE_NAME "AD5679R" +#elif defined(DEV_AD5686) +#define ACTIVE_DEVICE ID_AD5686 +#define ACTIVE_DEVICE_NAME "AD5686" +#elif defined(DEV_AD5684R) +#define ACTIVE_DEVICE ID_AD5684R +#define ACTIVE_DEVICE_NAME "AD5684R" +#elif defined(DEV_AD5685R) +#define ACTIVE_DEVICE ID_AD5685R +#define ACTIVE_DEVICE_NAME "AD5685R" +#elif defined(DEV_AD5686R) +#define ACTIVE_DEVICE ID_AD5686R +#define ACTIVE_DEVICE_NAME "AD5686R" +#elif defined(DEV_AD5687) +#define ACTIVE_DEVICE ID_AD5687 +#define ACTIVE_DEVICE_NAME "AD5687" +#elif defined(DEV_AD5687R) +#define ACTIVE_DEVICE ID_AD5687R +#define ACTIVE_DEVICE_NAME "AD5687R" +#elif defined(DEV_AD5689) +#define ACTIVE_DEVICE ID_AD5689 +#define ACTIVE_DEVICE_NAME "AD5689" +#elif defined(DEV_AD5689R) +#define ACTIVE_DEVICE ID_AD5689R +#define ACTIVE_DEVICE_NAME "AD5689R" +#elif defined(DEV_AD5697R) +#define ACTIVE_DEVICE ID_AD5697R +#define ACTIVE_DEVICE_NAME "AD5697R" +#elif defined(DEV_AD5694) +#define ACTIVE_DEVICE ID_AD5694 +#define ACTIVE_DEVICE_NAME "AD5694" +#elif defined(DEV_AD5694R) +#define ACTIVE_DEVICE ID_AD5694R +#define ACTIVE_DEVICE_NAME "AD5694R" +#elif defined(DEV_AD5695R) +#define ACTIVE_DEVICE ID_AD5695R +#define ACTIVE_DEVICE_NAME "AD5695R" +#elif defined(DEV_AD5696) +#define ACTIVE_DEVICE ID_AD5696 +#define ACTIVE_DEVICE_NAME "AD5696" +#elif defined(DEV_AD5696R) +#define ACTIVE_DEVICE ID_AD5696R +#define ACTIVE_DEVICE_NAME "AD5696R" +#elif defined(DEV_AD5681R) +#define ACTIVE_DEVICE ID_AD5681R +#define ACTIVE_DEVICE_NAME "AD5681R" +#elif defined(DEV_AD5682R) +#define ACTIVE_DEVICE ID_AD5682R +#define ACTIVE_DEVICE_NAME "AD5682R" +#elif defined(DEV_AD5683R) +#define ACTIVE_DEVICE ID_AD5683R +#define ACTIVE_DEVICE_NAME "AD5683R" +#elif defined(DEV_AD5683) +#define ACTIVE_DEVICE ID_AD5683 +#define ACTIVE_DEVICE_NAME "AD5683" +#elif defined(DEV_AD5691R) +#define ACTIVE_DEVICE ID_AD5691R +#define ACTIVE_DEVICE_NAME "AD5691R" +#elif defined(DEV_AD5692R) +#define ACTIVE_DEVICE ID_AD5692R +#define ACTIVE_DEVICE_NAME "AD5692R" +#elif defined(DEV_AD5693R) +#define ACTIVE_DEVICE ID_AD5693R +#define ACTIVE_DEVICE_NAME "AD5693R" +#elif defined(DEV_AD5693) +#define ACTIVE_DEVICE ID_AD5693 +#define ACTIVE_DEVICE_NAME "AD5693" +#else +#warning No/Unsupported ADxxxxy symbol defined. AD5686R defined +#define DEV_AD5686R +#define ACTIVE_DEVICE ID_AD5686R +#define ACTIVE_DEVICE_NAME "AD5686R" +#endif + + +// Pin mapping of AD7124 with SDP-K1/Arduino (reference: PinNames.h) +#ifdef ARDUINO +#define I2C_SCL D15 // I2C_SCL +#define I2C_SDA D14 // I2C_SDA + +#define SPI_SS D10 // SPI_CS +#define SPI_MOSI D11 // SPI_MOSI +#define SPI_MISO D12 // SPI_MISO +#define SPI_SCK D13 // SPI_SCK + +#define GAIN_PIN D8 +#define RESET_PIN D9 +#define LDAC_PIN D7 +#define ADDR0_PIN D6 +#else +#define I2C_SCL SDP_I2C_SCL // PH_7 +#define I2C_SDA SDP_I2C_SDA // PC_9 + +#define SPI_SS SDP_SPI_CS_A // PB_9 +#define SPI_MISO SDP_SPI_MISO // PF_8 +#define SPI_MOSI SDP_SPI_MOSI // PF_9 +#define SPI_SCK SDP_SPI_SCK // PH_6 +#endif + +// Define the other GPIO mapping based on the compatible EVAL board +// *Note: The 7-bit I2C slave address mentioned below is the default address for the +// device, set by combination of slave address bits (7:3) from the device +// datasheet and default logic level of A1 and A0 pins (bits 2:1) on the +// respective device EVAL board. For more information, refer the device +// datasheet and EVAL board manual. + +#if defined(DEV_AD5686R) || defined(DEV_AD5686) || \ + defined(DEV_AD5684R) || defined(DEV_AD5684) || \ + defined(DEV_AD5685R) +// These devices support EVAL-AD5686RSDZ board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_0 +#define RESET_PIN SDP_GPIO_2 +#define LDAC_PIN SDP_GPIO_3 +#endif +#elif defined(DEV_AD5696R) || defined(DEV_AD5696) || \ + defined(DEV_AD5694R) || defined(DEV_AD5694) || \ + defined(DEV_AD5695R) || defined(DEV_AD5697R) +// These devices support EVAL-AD5696RSDZ board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_0 +#define RESET_PIN SDP_GPIO_2 +#define LDAC_PIN SDP_GPIO_3 +#endif +#define I2C_SLAVE_ADDRESS 0x18 +#elif defined(DEV_AD5683) || defined(DEV_AD5683R) || defined(DEV_AD5682R) || \ + defined(DEV_AD5681R) +// These devices uses EVAL-AD5683R board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_2 +#define RESET_PIN SDP_GPIO_1 +#define LDAC_PIN SDP_GPIO_0 +#endif +#elif defined(DEV_AD5693) || defined(DEV_AD5693R) || defined(DEV_AD5692R) || \ + defined(DEV_AD5691R) +// These devices uses EVAL-AD5693R board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_2 +#define RESET_PIN SDP_GPIO_1 +#define LDAC_PIN SDP_GPIO_0 +#endif +#define I2C_SLAVE_ADDRESS 0x98 +#elif defined (DEV_AD5674R) || defined (DEV_AD5674) || \ + defined (DEV_AD5679R) || defined (DEV_AD5679) || \ + defined (DEV_AD5677R) || defined (DEV_AD5673R) +// These devices uses EVAL-AD5679RSDZ/EVAL-AD567xRSDZ board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_0 +#define RESET_PIN SDP_GPIO_2 +#define LDAC_PIN SDP_GPIO_1 +#endif +#define I2C_SLAVE_ADDRESS 0x1E +#elif defined (DEV_AD5676R) || defined (DEV_AD5676) || \ + defined (DEV_AD5672R) +// These devices uses EVAL-AD5676RSDZ board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_2 +#define RESET_PIN SDP_GPIO_1 +#define LDAC_PIN SDP_GPIO_0 +#endif +#elif defined (DEV_AD5671R) || defined (DEV_AD5675R) +// These devices uses EVAL-AD5675RSDZ board +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_2 +#define RESET_PIN SDP_GPIO_1 +#define LDAC_PIN SDP_GPIO_0 +#endif +#define I2C_SLAVE_ADDRESS 0x18 +#else +#warning No/Unsupported EVAL board found. Using EVAL-AD5686R as default. +#if !defined ARDUINO +#define GAIN_PIN SDP_GPIO_0 +#define RESET_PIN SDP_GPIO_2 +#define LDAC_PIN SDP_GPIO_3 +#endif +#endif + + +// Common pin mappings +#define LED_GREEN LED3 // PK_5 + +#endif //_APP_CONFIG_H_